From: Phil Yang <phil.yang@arm.com>
To: dev@dpdk.org
Cc: nd@arm.com
Subject: [dpdk-dev] [PATCH v2] test/pmd_ring: release ring resources after test
Date: Fri, 19 Oct 2018 19:12:06 +0800 [thread overview]
Message-ID: <1539947526-13271-1-git-send-email-phil.yang@arm.com> (raw)
In-Reply-To: <1539946839-12996-2-git-send-email-phil.yang@arm.com>
Need to release the port and the ring resources after test. Otherwise,
it will cause failure to allocate memory when reentry the test.
Fixes: 4ea3801 ("app/test: fix ring unit test")
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
---
test/test/test_pmd_ring.c | 100 ++++++++++++++++++++++++++++------------------
1 file changed, 62 insertions(+), 38 deletions(-)
diff --git a/test/test/test_pmd_ring.c b/test/test/test_pmd_ring.c
index 19d7d20..f332df9 100644
--- a/test/test/test_pmd_ring.c
+++ b/test/test/test_pmd_ring.c
@@ -7,15 +7,16 @@
#include <rte_eth_ring.h>
#include <rte_ethdev.h>
-
-static struct rte_mempool *mp;
-static int tx_porta, rx_portb, rxtx_portc, rxtx_portd, rxtx_porte;
+#include <rte_bus_vdev.h>
#define SOCKET0 0
#define RING_SIZE 256
#define NUM_RINGS 2
#define NB_MBUF 512
+#define NUM_PORTS 5
+static struct rte_mempool *mp;
+static int ports[NUM_PORTS];
static int
test_ethdev_configure_port(int port)
@@ -64,18 +65,19 @@ test_send_basic_packets(void)
struct rte_mbuf *pbufs[RING_SIZE];
int i;
- printf("Testing send and receive RING_SIZE/2 packets (tx_porta -> rx_portb)\n");
+ printf("Testing send and receive RING_SIZE/2 "
+ "packets (ports[0] -> ports[1])\n");
for (i = 0; i < RING_SIZE/2; i++)
pbufs[i] = &bufs[i];
- if (rte_eth_tx_burst(tx_porta, 0, pbufs, RING_SIZE/2) < RING_SIZE/2) {
- printf("Failed to transmit packet burst port %d\n", tx_porta);
+ if (rte_eth_tx_burst(ports[0], 0, pbufs, RING_SIZE/2) < RING_SIZE/2) {
+ printf("Failed to transmit packet burst port %d\n", ports[0]);
return -1;
}
- if (rte_eth_rx_burst(rx_portb, 0, pbufs, RING_SIZE) != RING_SIZE/2) {
- printf("Failed to receive packet burst on port %d\n", rx_portb);
+ if (rte_eth_rx_burst(ports[1], 0, pbufs, RING_SIZE) != RING_SIZE/2) {
+ printf("Failed to receive packet burst on port %d\n", ports[1]);
return -1;
}
@@ -95,7 +97,8 @@ test_send_basic_packets_port(int port)
struct rte_mbuf *pbufs[RING_SIZE];
int i;
- printf("Testing send and receive RING_SIZE/2 packets (cmdl_port0 -> cmdl_port0)\n");
+ printf("Testing send and receive RING_SIZE/2 packets"
+ "(cmdl_port0 -> cmdl_port0)\n");
for (i = 0; i < RING_SIZE/2; i++)
pbufs[i] = &bufs[i];
@@ -232,8 +235,10 @@ test_pmd_ring_pair_create_attach(int portd, int porte)
return -1;
}
- if ((rte_eth_rx_queue_setup(portd, 0, RING_SIZE, SOCKET0, NULL, mp) < 0)
- || (rte_eth_rx_queue_setup(porte, 0, RING_SIZE, SOCKET0, NULL, mp) < 0)) {
+ if ((rte_eth_rx_queue_setup(portd, 0, RING_SIZE,
+ SOCKET0, NULL, mp) < 0)
+ || (rte_eth_rx_queue_setup(porte, 0, RING_SIZE,
+ SOCKET0, NULL, mp) < 0)) {
printf("RX queue setup failed\n");
return -1;
}
@@ -388,9 +393,6 @@ test_pmd_ring_pair_create_attach(int portd, int porte)
return -1;
}
- rte_eth_dev_stop(portd);
- rte_eth_dev_stop(porte);
-
return 0;
}
@@ -400,6 +402,7 @@ test_pmd_ring(void)
struct rte_ring *rxtx[NUM_RINGS];
int port, cmdl_port0 = -1;
uint8_t nb_ports;
+ char port_name[RTE_ETH_NAME_MAX_LEN];
nb_ports = rte_eth_dev_count_avail();
printf("nb_ports=%d\n", (int)nb_ports);
@@ -409,29 +412,36 @@ test_pmd_ring(void)
*
* Test with the command line option --vdev=net_ring0 to test rte_pmd_ring_devinit.
*/
- rxtx[0] = rte_ring_create("R0", RING_SIZE, SOCKET0, RING_F_SP_ENQ|RING_F_SC_DEQ);
+ rxtx[0] = rte_ring_create("R0", RING_SIZE, SOCKET0,
+ RING_F_SP_ENQ|RING_F_SC_DEQ);
if (rxtx[0] == NULL) {
printf("rte_ring_create R0 failed");
return -1;
}
- rxtx[1] = rte_ring_create("R1", RING_SIZE, SOCKET0, RING_F_SP_ENQ|RING_F_SC_DEQ);
+ rxtx[1] = rte_ring_create("R1", RING_SIZE, SOCKET0,
+ RING_F_SP_ENQ|RING_F_SC_DEQ);
if (rxtx[1] == NULL) {
printf("rte_ring_create R1 failed");
return -1;
}
- tx_porta = rte_eth_from_rings("net_ringa", rxtx, NUM_RINGS, rxtx, NUM_RINGS, SOCKET0);
- rx_portb = rte_eth_from_rings("net_ringb", rxtx, NUM_RINGS, rxtx, NUM_RINGS, SOCKET0);
- rxtx_portc = rte_eth_from_rings("net_ringc", rxtx, NUM_RINGS, rxtx, NUM_RINGS, SOCKET0);
- rxtx_portd = rte_eth_from_rings("net_ringd", rxtx, NUM_RINGS, rxtx, NUM_RINGS, SOCKET0);
- rxtx_porte = rte_eth_from_rings("net_ringe", rxtx, NUM_RINGS, rxtx, NUM_RINGS, SOCKET0);
+ ports[0] = rte_eth_from_rings("net_ringa", rxtx,
+ NUM_RINGS, rxtx, NUM_RINGS, SOCKET0);
+ ports[1] = rte_eth_from_rings("net_ringb", rxtx,
+ NUM_RINGS, rxtx, NUM_RINGS, SOCKET0);
+ ports[2] = rte_eth_from_rings("net_ringc", rxtx,
+ NUM_RINGS, rxtx, NUM_RINGS, SOCKET0);
+ ports[3] = rte_eth_from_rings("net_ringd", rxtx,
+ NUM_RINGS, rxtx, NUM_RINGS, SOCKET0);
+ ports[4] = rte_eth_from_rings("net_ringe", rxtx,
+ NUM_RINGS, rxtx, NUM_RINGS, SOCKET0);
- printf("tx_porta=%d rx_portb=%d rxtx_portc=%d rxtx_portd=%d rxtx_porte=%d\n",
- tx_porta, rx_portb, rxtx_portc, rxtx_portd, rxtx_porte);
+ printf("ports[0]=%d ports[1]=%d ports[2]=%d ports[3]=%d ports[4]=%d\n",
+ ports[0], ports[1], ports[2], ports[3], ports[4]);
- if ((tx_porta == -1) || (rx_portb == -1) || (rxtx_portc == -1)
- || (rxtx_portd == -1) || (rxtx_porte == -1)) {
+ if ((ports[0] == -1) || (ports[1] == -1) || (ports[2] == -1)
+ || (ports[3] == -1) || (ports[4] == -1)) {
printf("rte_eth_from rings failed\n");
return -1;
}
@@ -441,37 +451,35 @@ test_pmd_ring(void)
if (mp == NULL)
return -1;
- if ((tx_porta >= RTE_MAX_ETHPORTS) || (rx_portb >= RTE_MAX_ETHPORTS)
- || (rxtx_portc >= RTE_MAX_ETHPORTS)
- || (rxtx_portd >= RTE_MAX_ETHPORTS)
- || (rxtx_porte >= RTE_MAX_ETHPORTS)) {
+ if ((ports[0] >= RTE_MAX_ETHPORTS)
+ || (ports[1] >= RTE_MAX_ETHPORTS)
+ || (ports[2] >= RTE_MAX_ETHPORTS)
+ || (ports[3] >= RTE_MAX_ETHPORTS)
+ || (ports[4] >= RTE_MAX_ETHPORTS)) {
printf(" port exceed max eth ports\n");
return -1;
}
- if (test_ethdev_configure_port(tx_porta) < 0)
+ if (test_ethdev_configure_port(ports[0]) < 0)
return -1;
- if (test_ethdev_configure_port(rx_portb) < 0)
+ if (test_ethdev_configure_port(ports[1]) < 0)
return -1;
- if (test_ethdev_configure_port(rxtx_portc) < 0)
+ if (test_ethdev_configure_port(ports[2]) < 0)
return -1;
if (test_send_basic_packets() < 0)
return -1;
- if (test_get_stats(rxtx_portc) < 0)
+ if (test_get_stats(ports[2]) < 0)
return -1;
- if (test_stats_reset(rxtx_portc) < 0)
+ if (test_stats_reset(ports[2]) < 0)
return -1;
- rte_eth_dev_stop(tx_porta);
- rte_eth_dev_stop(rx_portb);
- rte_eth_dev_stop(rxtx_portc);
- if (test_pmd_ring_pair_create_attach(rxtx_portd, rxtx_porte) < 0)
+ if (test_pmd_ring_pair_create_attach(ports[3], ports[4]) < 0)
return -1;
/* find a port created with the --vdev=net_ring0 command line option */
@@ -495,7 +503,23 @@ test_pmd_ring(void)
if (test_get_stats(cmdl_port0) < 0)
return -1;
rte_eth_dev_stop(cmdl_port0);
+ rte_eth_dev_get_name_by_port(cmdl_port0, port_name);
+ rte_vdev_uninit(port_name);
}
+
+ /* release ports and rings resources */
+ if (mp != NULL)
+ rte_mempool_free(mp);
+
+ for (int i = 0; i < NUM_PORTS; i++) {
+ rte_eth_dev_stop(ports[i]);
+ rte_eth_dev_get_name_by_port(ports[i], port_name);
+ rte_vdev_uninit(port_name);
+ }
+
+ for (int i = 0; i < NUM_RINGS; i++)
+ rte_ring_free(rxtx[i]);
+
return 0;
}
--
2.7.4
next prev parent reply other threads:[~2018-10-19 11:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-19 11:00 [dpdk-dev] [PATCH 1/2] test/pmd_ring_perf: " Phil Yang
2018-10-19 11:00 ` [dpdk-dev] [PATCH 2/2] test/pmd_ring: " Phil Yang
2018-10-19 11:12 ` Phil Yang [this message]
2018-10-30 0:42 ` [dpdk-dev] [PATCH v2] " Phil Yang (Arm Technology China)
2018-11-18 22:21 ` [dpdk-dev] [PATCH 1/2] test/pmd_ring_perf: " Thomas Monjalon
2018-11-19 1:42 ` Phil Yang (Arm Technology China)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1539947526-13271-1-git-send-email-phil.yang@arm.com \
--to=phil.yang@arm.com \
--cc=dev@dpdk.org \
--cc=nd@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).