DPDK patches and discussions
 help / color / mirror / Atom feed
From: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
To: bruce.richardson@intel.com, pablo.de.lara.guarch@intel.com
Cc: dev@dpdk.org, yipeng1.wang@intel.com,
	honnappa.nagarahalli@arm.com, dharmik.thakkar@arm.com,
	gavin.hu@arm.com, nd@arm.com
Subject: [dpdk-dev] [PATCH v6 5/5] test/hash: read-write lock-free concurrency test
Date: Tue, 23 Oct 2018 20:32:26 -0500	[thread overview]
Message-ID: <1540344746-29045-6-git-send-email-honnappa.nagarahalli@arm.com> (raw)
In-Reply-To: <1540344746-29045-1-git-send-email-honnappa.nagarahalli@arm.com>

From: Dharmik Thakkar <dharmik.thakkar@arm.com>

Unit tests to check for hash lookup and bulk-lookup perf
with lock-free enabled and with lock-free disabled.
Unit tests performed with readers running in parallel with writers.

Tests include:

- hash lookup on existing keys with:
  - hash add causing NO key-shifts of existing keys in the table

- hash lookup on existing keys likely to be on shift-path with:
  - hash add causing key-shifts of existing keys in the table

- hash lookup on existing keys NOT likely to be on shift-path with:
  - hash add causing key-shifts of existing keys in the table

- hash lookup on non-existing keys with:
  - hash add causing NO key-shifts of existing keys in the table
  - hash add causing key-shifts of existing keys in the table

- hash lookup on keys likely to be on shift-path with:
  - multiple writers causing key-shifts of existing keys in the table

Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Yipeng Wang <yipeng1.wang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
---
 test/test/Makefile                 |    1 +
 test/test/autotest_data.py         |    6 +
 test/test/meson.build              |    2 +
 test/test/test_hash_readwrite_lf.c | 1220 ++++++++++++++++++++++++++++++++++++
 4 files changed, 1229 insertions(+)
 create mode 100644 test/test/test_hash_readwrite_lf.c

diff --git a/test/test/Makefile b/test/test/Makefile
index 8c347e4..1b5c070 100644
--- a/test/test/Makefile
+++ b/test/test/Makefile
@@ -116,6 +116,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_HASH) += test_hash_functions.c
 SRCS-$(CONFIG_RTE_LIBRTE_HASH) += test_hash_scaling.c
 SRCS-$(CONFIG_RTE_LIBRTE_HASH) += test_hash_multiwriter.c
 SRCS-$(CONFIG_RTE_LIBRTE_HASH) += test_hash_readwrite.c
+SRCS-$(CONFIG_RTE_LIBRTE_HASH) += test_hash_readwrite_lf.c
 
 SRCS-$(CONFIG_RTE_LIBRTE_LPM) += test_lpm.c
 SRCS-$(CONFIG_RTE_LIBRTE_LPM) += test_lpm_perf.c
diff --git a/test/test/autotest_data.py b/test/test/autotest_data.py
index 51f8e16..4eae588 100644
--- a/test/test/autotest_data.py
+++ b/test/test/autotest_data.py
@@ -580,6 +580,12 @@
         "Report":  None,
     },
     {
+        "Name":    "Hash read-write lock-free concurrency autotest",
+        "Command": "hash_readwrite_lf_autotest",
+        "Func":    default_autotest,
+        "Report":  None,
+    },
+    {
         "Name":       "Power autotest",
         "Command":    "power_autotest",
         "Func":       default_autotest,
diff --git a/test/test/meson.build b/test/test/meson.build
index 90d6607..faef5a4 100644
--- a/test/test/meson.build
+++ b/test/test/meson.build
@@ -46,6 +46,7 @@ test_sources = files('commands.c',
 	'test_hash_multiwriter.c',
 	'test_hash_readwrite.c',
 	'test_hash_perf.c',
+	'test_hash_readwrite_lf.c',
 	'test_hash_scaling.c',
 	'test_interrupts.c',
 	'test_kni.c',
@@ -174,6 +175,7 @@ test_names = [
 	'hash_functions_autotest',
 	'hash_multiwriter_autotest',
 	'hash_perf_autotest',
+	'hash_readwrite_lf_autotest',
 	'interrupt_autotest',
 	'kni_autotest',
 	'kvargs_autotest',
diff --git a/test/test/test_hash_readwrite_lf.c b/test/test/test_hash_readwrite_lf.c
new file mode 100644
index 0000000..cbfd932
--- /dev/null
+++ b/test/test/test_hash_readwrite_lf.c
@@ -0,0 +1,1220 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Arm Limited
+ */
+
+#include <inttypes.h>
+#include <locale.h>
+
+#include <rte_cycles.h>
+#include <rte_hash.h>
+#include <rte_hash_crc.h>
+#include <rte_jhash.h>
+#include <rte_launch.h>
+#include <rte_malloc.h>
+#include <rte_random.h>
+#include <rte_spinlock.h>
+
+#include "test.h"
+
+#ifndef RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF
+#define RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF 0
+#endif
+
+#define BULK_LOOKUP_SIZE 32
+
+#define RUN_WITH_HTM_DISABLED 0
+
+#if (RUN_WITH_HTM_DISABLED)
+
+#define TOTAL_ENTRY (5*1024)
+#define TOTAL_INSERT (5*1024)
+
+#else
+
+#define TOTAL_ENTRY (4*1024*1024)
+#define TOTAL_INSERT (4*1024*1024)
+
+#endif
+
+#define READ_FAIL 1
+#define READ_PASS_NO_KEY_SHIFTS 2
+#define READ_PASS_SHIFT_PATH 4
+#define READ_PASS_NON_SHIFT_PATH 8
+#define BULK_LOOKUP 16
+#define NUM_TEST 3
+unsigned int rwc_core_cnt[NUM_TEST] = {1, 2, 4};
+
+struct rwc_perf {
+	uint32_t w_no_ks_r_hit[2][NUM_TEST];
+	uint32_t w_no_ks_r_miss[2][NUM_TEST];
+	uint32_t w_ks_r_hit_nsp[2][NUM_TEST];
+	uint32_t w_ks_r_hit_sp[2][NUM_TEST];
+	uint32_t w_ks_r_miss[2][NUM_TEST];
+	uint32_t multi_rw[NUM_TEST - 1][2][NUM_TEST];
+};
+
+static struct rwc_perf rwc_lf_results, rwc_non_lf_results;
+
+struct {
+	uint32_t *keys;
+	uint32_t *keys_no_ks;
+	uint32_t *keys_ks;
+	uint32_t *keys_absent;
+	uint32_t *keys_shift_path;
+	uint32_t *keys_non_shift_path;
+	uint32_t count_keys_no_ks;
+	uint32_t count_keys_ks;
+	uint32_t count_keys_absent;
+	uint32_t count_keys_shift_path;
+	uint32_t count_keys_non_shift_path;
+	uint32_t single_insert;
+	struct rte_hash *h;
+} tbl_rwc_test_param;
+
+static rte_atomic64_t gread_cycles;
+static rte_atomic64_t greads;
+
+static volatile uint8_t writer_done;
+static volatile uint8_t multi_writer_done[4];
+
+uint16_t enabled_core_ids[RTE_MAX_LCORE];
+
+uint8_t *scanned_bkts;
+
+static inline int
+get_enabled_cores_list(void)
+{
+	uint32_t i = 0;
+	uint16_t core_id;
+	uint32_t max_cores = rte_lcore_count();
+	for (core_id = 0; core_id < RTE_MAX_LCORE && i < max_cores; core_id++) {
+		if (rte_lcore_is_enabled(core_id)) {
+			enabled_core_ids[i] = core_id;
+			i++;
+		}
+	}
+
+	if (i != max_cores) {
+		printf("Number of enabled cores in list is different from "
+			"number given by rte_lcore_count()\n");
+		return -1;
+	}
+	return 0;
+}
+
+static inline int
+check_bucket(uint32_t bkt_idx, uint32_t key)
+{
+	uint32_t iter;
+	uint32_t prev_iter;
+	uint32_t diff;
+	uint32_t count = 0;
+	const void *next_key;
+	void *next_data;
+
+	/* Temporary bucket to hold the keys */
+	uint32_t keys_in_bkt[8];
+
+	iter = bkt_idx * 8;
+	prev_iter = iter;
+	while (rte_hash_iterate(tbl_rwc_test_param.h,
+			&next_key, &next_data, &iter) >= 0) {
+
+		/* Check for duplicate entries */
+		if (*(const uint32_t *)next_key == key)
+			return 1;
+
+		/* Identify if there is any free entry in the bucket */
+		diff = iter - prev_iter;
+		if (diff > 1)
+			break;
+
+		prev_iter = iter;
+		keys_in_bkt[count] = *(const uint32_t *)next_key;
+		count++;
+
+		/* All entries in the bucket are occupied */
+		if (count == 8) {
+
+			/*
+			 * Check if bucket was not scanned before, to avoid
+			 * duplicate keys.
+			 */
+			if (scanned_bkts[bkt_idx] == 0) {
+				/*
+				 * Since this bucket (pointed to by bkt_idx) is
+				 * full, it is likely that key(s) in this
+				 * bucket will be on the shift path, when
+				 * collision occurs. Thus, add it to
+				 * keys_shift_path.
+				 */
+				memcpy(tbl_rwc_test_param.keys_shift_path +
+					tbl_rwc_test_param.count_keys_shift_path
+					, keys_in_bkt, 32);
+				tbl_rwc_test_param.count_keys_shift_path += 8;
+				scanned_bkts[bkt_idx] = 1;
+			}
+			return -1;
+		}
+	}
+	return 0;
+}
+
+static int
+generate_keys(void)
+{
+	uint32_t *keys = NULL;
+	uint32_t *keys_no_ks = NULL;
+	uint32_t *keys_ks = NULL;
+	uint32_t *keys_absent = NULL;
+	uint32_t *keys_non_shift_path = NULL;
+	uint32_t *found = NULL;
+	uint32_t count_keys_no_ks = 0;
+	uint32_t count_keys_ks = 0;
+	uint32_t i;
+
+	/*
+	 * keys will consist of a) keys whose addition to the hash table
+	 * will result in shifting of the existing keys to their alternate
+	 * locations b) keys whose addition to the hash table will not result
+	 * in shifting of the existing keys.
+	 */
+	keys = rte_malloc(NULL, sizeof(uint32_t) * TOTAL_INSERT, 0);
+	if (keys == NULL) {
+		printf("RTE_MALLOC failed\n");
+		goto err;
+	}
+
+	/*
+	 * keys_no_ks (no key-shifts): Subset of 'keys' - consists of keys  that
+	 * will NOT result in shifting of the existing keys to their alternate
+	 * locations. Roughly around 900K keys.
+	 */
+	keys_no_ks = rte_malloc(NULL, sizeof(uint32_t) * TOTAL_INSERT, 0);
+	if (keys_no_ks == NULL) {
+		printf("RTE_MALLOC failed\n");
+		goto err;
+	}
+
+	/*
+	 * keys_ks (key-shifts): Subset of 'keys' - consists of keys that will
+	 * result in shifting of the existing keys to their alternate locations.
+	 * Roughly around 146K keys. There might be repeating keys. More code is
+	 * required to filter out these keys which will complicate the test case
+	 */
+	keys_ks = rte_malloc(NULL, sizeof(uint32_t) * TOTAL_INSERT, 0);
+	if (keys_ks == NULL) {
+		printf("RTE_MALLOC failed\n");
+		goto err;
+	}
+
+	/* Used to identify keys not inserted in the hash table */
+	found = rte_zmalloc(NULL, sizeof(uint32_t) * TOTAL_INSERT, 0);
+	if (found == NULL) {
+		printf("RTE_MALLOC failed\n");
+		goto err;
+	}
+
+	/*
+	 * This consist of keys not inserted to the hash table.
+	 * Used to test perf of lookup on keys that do not exist in the table.
+	 */
+	keys_absent = rte_malloc(NULL, sizeof(uint32_t) * TOTAL_INSERT, 0);
+	if (keys_absent == NULL) {
+		printf("RTE_MALLOC failed\n");
+		goto err;
+	}
+
+	/*
+	 * This consist of keys which are likely to be on the shift
+	 * path (i.e. being moved to alternate location), when collision occurs
+	 * on addition of a key to an already full primary bucket.
+	 * Used to test perf of lookup on keys that are on the shift path.
+	 */
+	tbl_rwc_test_param.keys_shift_path = rte_malloc(NULL, sizeof(uint32_t) *
+							TOTAL_INSERT, 0);
+	if (tbl_rwc_test_param.keys_shift_path == NULL) {
+		printf("RTE_MALLOC failed\n");
+		goto err;
+	}
+
+	/*
+	 * This consist of keys which are never on the shift
+	 * path (i.e. being moved to alternate location), when collision occurs
+	 * on addition of a key to an already full primary bucket.
+	 * Used to test perf of lookup on keys that are not on the shift path.
+	 */
+	keys_non_shift_path = rte_malloc(NULL, sizeof(uint32_t) * TOTAL_INSERT,
+					 0);
+	if (keys_non_shift_path == NULL) {
+		printf("RTE_MALLOC failed\n");
+		goto err;
+	}
+
+
+	hash_sig_t sig;
+	uint32_t prim_bucket_idx;
+	int ret;
+	uint32_t num_buckets;
+	uint32_t bucket_bitmask;
+	num_buckets  = rte_align32pow2(TOTAL_ENTRY) / 8;
+	bucket_bitmask = num_buckets - 1;
+
+	/*
+	 * Used to mark bkts in which at least one key was shifted to its
+	 * alternate location
+	 */
+	scanned_bkts = rte_malloc(NULL, sizeof(uint8_t) * num_buckets, 0);
+	if (scanned_bkts == NULL) {
+		printf("RTE_MALLOC failed\n");
+		goto err;
+	}
+
+	tbl_rwc_test_param.keys = keys;
+	tbl_rwc_test_param.keys_no_ks = keys_no_ks;
+	tbl_rwc_test_param.keys_ks = keys_ks;
+	tbl_rwc_test_param.keys_absent = keys_absent;
+	tbl_rwc_test_param.keys_non_shift_path = keys_non_shift_path;
+	/* Generate keys by adding previous two keys, neglect overflow */
+	printf("Generating keys...\n");
+	keys[0] = 0;
+	keys[1] = 1;
+	for (i = 2; i < TOTAL_INSERT; i++)
+		keys[i] = keys[i-1] + keys[i-2];
+
+	/* Segregate keys into keys_no_ks and keys_ks */
+	for (i = 0; i < TOTAL_INSERT; i++) {
+		/* Check if primary bucket has space.*/
+		sig = rte_hash_hash(tbl_rwc_test_param.h,
+					tbl_rwc_test_param.keys+i);
+		prim_bucket_idx = sig & bucket_bitmask;
+		ret = check_bucket(prim_bucket_idx, keys[i]);
+		if (ret < 0) {
+			/*
+			 * Primary bucket is full, this key will result in
+			 * shifting of the keys to their alternate locations.
+			 */
+			keys_ks[count_keys_ks] = keys[i];
+			count_keys_ks++;
+		} else if (ret == 0) {
+			/*
+			 * Primary bucket has space, this key will not result in
+			 * shifting of the keys. Hence, add key to the table.
+			 */
+			ret = rte_hash_add_key_data(tbl_rwc_test_param.h,
+							keys+i,
+							(void *)((uintptr_t)i));
+			if (ret < 0) {
+				printf("writer failed %"PRIu32"\n", i);
+				break;
+			}
+			keys_no_ks[count_keys_no_ks] = keys[i];
+			count_keys_no_ks++;
+		}
+	}
+
+	for (i = 0; i < count_keys_no_ks; i++) {
+		/*
+		 * Identify keys in keys_no_ks with value less than
+		 * 4M (HTM enabled) OR 5K (HTM disabled)
+		 */
+		if (keys_no_ks[i] < TOTAL_INSERT)
+			found[keys_no_ks[i]]++;
+	}
+
+	for (i = 0; i < count_keys_ks; i++) {
+		/*
+		 * Identify keys in keys_ks with value less than
+		 * 4M (HTM enabled) OR 5K (HTM disabled)
+		 */
+		if (keys_ks[i] < TOTAL_INSERT)
+			found[keys_ks[i]]++;
+	}
+
+	uint32_t count_keys_absent = 0;
+	for (i = 0; i < TOTAL_INSERT; i++) {
+		/*
+		 * Identify missing keys between 0 and
+		 * 4M (HTM enabled) OR 5K (HTM disabled)
+		 */
+		if (found[i] == 0)
+			keys_absent[count_keys_absent++] = i;
+	}
+
+	/* Find keys that will not be on the shift path */
+	uint32_t iter;
+	const void *next_key;
+	void *next_data;
+	uint32_t count = 0;
+	for (i = 0; i < num_buckets; i++) {
+		/* Check bucket for no keys shifted to alternate locations */
+		if (scanned_bkts[i] == 0) {
+			iter = i * 8;
+			while (rte_hash_iterate(tbl_rwc_test_param.h,
+				&next_key, &next_data, &iter) >= 0) {
+
+				/* Check if key belongs to the current bucket */
+				if (i >= (iter-1)/8)
+					keys_non_shift_path[count++]
+						= *(const uint32_t *)next_key;
+				else
+					break;
+			}
+		}
+	}
+
+	tbl_rwc_test_param.count_keys_no_ks = count_keys_no_ks;
+	tbl_rwc_test_param.count_keys_ks = count_keys_ks;
+	tbl_rwc_test_param.count_keys_absent = count_keys_absent;
+	tbl_rwc_test_param.count_keys_non_shift_path = count;
+
+	printf("\nCount of keys NOT causing shifting of existing keys to "
+	"alternate location: %d\n", tbl_rwc_test_param.count_keys_no_ks);
+	printf("\nCount of keys causing shifting of existing keys to alternate "
+		"locations: %d\n\n", tbl_rwc_test_param.count_keys_ks);
+	printf("Count of absent keys that will never be added to the hash "
+		"table: %d\n\n", tbl_rwc_test_param.count_keys_absent);
+	printf("Count of keys likely to be on the shift path: %d\n\n",
+	       tbl_rwc_test_param.count_keys_shift_path);
+	printf("Count of keys not likely to be on the shift path: %d\n\n",
+	       tbl_rwc_test_param.count_keys_non_shift_path);
+
+	rte_free(found);
+	rte_hash_free(tbl_rwc_test_param.h);
+	return 0;
+
+err:
+	rte_free(keys);
+	rte_free(keys_no_ks);
+	rte_free(keys_ks);
+	rte_free(keys_absent);
+	rte_free(found);
+	rte_free(tbl_rwc_test_param.keys_shift_path);
+	rte_free(scanned_bkts);
+	return -1;
+}
+
+static int
+init_params(int rwc_lf, int use_jhash, int htm)
+{
+	struct rte_hash *handle;
+
+	struct rte_hash_parameters hash_params = {
+		.entries = TOTAL_ENTRY,
+		.key_len = sizeof(uint32_t),
+		.hash_func_init_val = 0,
+		.socket_id = rte_socket_id(),
+	};
+
+	if (use_jhash)
+		hash_params.hash_func = rte_jhash;
+	else
+		hash_params.hash_func = rte_hash_crc;
+
+	if (rwc_lf)
+		hash_params.extra_flag =
+			RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF |
+			RTE_HASH_EXTRA_FLAGS_MULTI_WRITER_ADD;
+	else if (htm)
+		hash_params.extra_flag =
+			RTE_HASH_EXTRA_FLAGS_TRANS_MEM_SUPPORT |
+			RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY |
+			RTE_HASH_EXTRA_FLAGS_MULTI_WRITER_ADD;
+	else
+		hash_params.extra_flag =
+			RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY |
+			RTE_HASH_EXTRA_FLAGS_MULTI_WRITER_ADD;
+
+	hash_params.name = "tests";
+
+	handle = rte_hash_create(&hash_params);
+	if (handle == NULL) {
+		printf("hash creation failed");
+		return -1;
+	}
+
+	tbl_rwc_test_param.h = handle;
+	return 0;
+}
+
+static int
+test_rwc_reader(__attribute__((unused)) void *arg)
+{
+	uint32_t i, j;
+	int ret;
+	uint64_t begin, cycles;
+	uint32_t loop_cnt = 0;
+	uint8_t read_type = (uint8_t)((uintptr_t)arg);
+	uint32_t read_cnt;
+	uint32_t *keys;
+	uint32_t extra_keys;
+	int32_t *pos;
+	void *temp_a[BULK_LOOKUP_SIZE];
+
+	/* Used to identify keys not inserted in the hash table */
+	pos = rte_zmalloc(NULL, sizeof(uint32_t) * BULK_LOOKUP_SIZE, 0);
+	if (pos == NULL) {
+		printf("RTE_MALLOC failed\n");
+		return -1;
+	}
+
+	if (read_type & READ_FAIL) {
+		keys = tbl_rwc_test_param.keys_absent;
+		read_cnt = tbl_rwc_test_param.count_keys_absent;
+	} else if (read_type & READ_PASS_NO_KEY_SHIFTS) {
+		keys = tbl_rwc_test_param.keys_no_ks;
+		read_cnt = tbl_rwc_test_param.count_keys_no_ks;
+	} else if (read_type & READ_PASS_SHIFT_PATH) {
+		keys = tbl_rwc_test_param.keys_shift_path;
+		read_cnt = tbl_rwc_test_param.count_keys_shift_path;
+	} else {
+		keys = tbl_rwc_test_param.keys_non_shift_path;
+		read_cnt = tbl_rwc_test_param.count_keys_non_shift_path;
+	}
+
+	extra_keys = read_cnt & (BULK_LOOKUP_SIZE - 1);
+
+	begin = rte_rdtsc_precise();
+	do {
+		if (read_type & BULK_LOOKUP) {
+			for (i = 0; i < (read_cnt - extra_keys);
+			     i += BULK_LOOKUP_SIZE) {
+				/* Array of  pointer to the list of keys */
+				for (j = 0; j < BULK_LOOKUP_SIZE; j++)
+					temp_a[j] = keys + i + j;
+
+				rte_hash_lookup_bulk(tbl_rwc_test_param.h,
+						   (const void **)
+						   ((uintptr_t)temp_a),
+						   BULK_LOOKUP_SIZE, pos);
+				/* Validate lookup result */
+				for (j = 0; j < BULK_LOOKUP_SIZE; j++)
+					if ((read_type & READ_FAIL &&
+					     pos[j] != -ENOENT) ||
+					    (!(read_type & READ_FAIL) &&
+					     pos[j] == -ENOENT)) {
+						printf("lookup failed!"
+						       "%"PRIu32"\n",
+						       keys[i + j]);
+						return -1;
+					}
+			}
+			for (j = 0; j < extra_keys; j++)
+				temp_a[j] = keys + i + j;
+
+			rte_hash_lookup_bulk(tbl_rwc_test_param.h,
+					   (const void **)
+					   ((uintptr_t)temp_a),
+					   extra_keys, pos);
+			for (j = 0; j < extra_keys; j++)
+				if ((read_type & READ_FAIL &&
+				     pos[j] != -ENOENT) ||
+				    (!(read_type & READ_FAIL) &&
+				     pos[j] == -ENOENT)) {
+					printf("lookup failed! %"PRIu32"\n",
+					       keys[i + j]);
+					return -1;
+				}
+		} else {
+			for (i = 0; i < read_cnt; i++) {
+				ret = rte_hash_lookup
+					(tbl_rwc_test_param.h, keys + i);
+				if (((read_type & READ_FAIL) &&
+				     (ret != -ENOENT)) ||
+				    (!(read_type & READ_FAIL) &&
+					ret == -ENOENT)) {
+					printf("lookup failed! %"PRIu32"\n",
+					       keys[i]);
+					return -1;
+				}
+			}
+		}
+		loop_cnt++;
+	} while (!writer_done);
+
+	cycles = rte_rdtsc_precise() - begin;
+	rte_atomic64_add(&gread_cycles, cycles);
+	rte_atomic64_add(&greads, read_cnt*loop_cnt);
+	return 0;
+}
+
+static int
+write_keys(uint8_t key_shift)
+{
+	uint32_t i;
+	int ret;
+	uint32_t key_cnt;
+	uint32_t *keys;
+	if (key_shift) {
+		key_cnt = tbl_rwc_test_param.count_keys_ks;
+		keys = tbl_rwc_test_param.keys_ks;
+	} else {
+		key_cnt = tbl_rwc_test_param.count_keys_no_ks;
+		keys = tbl_rwc_test_param.keys_no_ks;
+	}
+	for (i = 0; i < key_cnt; i++) {
+		ret = rte_hash_add_key(tbl_rwc_test_param.h, keys + i);
+		if (!key_shift && ret < 0) {
+			printf("writer failed %"PRIu32"\n", i);
+			return -1;
+		}
+	}
+	return 0;
+}
+
+static int
+test_rwc_multi_writer(__attribute__((unused)) void *arg)
+{
+	uint32_t i, offset;
+	uint32_t pos_core = (uint32_t)((uintptr_t)arg);
+	offset = pos_core * tbl_rwc_test_param.single_insert;
+	for (i = offset; i < offset + tbl_rwc_test_param.single_insert; i++)
+		rte_hash_add_key(tbl_rwc_test_param.h,
+				 tbl_rwc_test_param.keys_ks + i);
+	multi_writer_done[pos_core] = 1;
+	return 0;
+}
+
+/*
+ * Test lookup perf:
+ * Reader(s) lookup keys present in the table.
+ */
+static int
+test_hash_add_no_ks_lookup_hit(struct rwc_perf *rwc_perf_results, int rwc_lf,
+				int htm)
+{
+	unsigned int n, m;
+	uint64_t i;
+	int use_jhash = 0;
+	uint8_t key_shift = 0;
+	uint8_t read_type = READ_PASS_NO_KEY_SHIFTS;
+
+	rte_atomic64_init(&greads);
+	rte_atomic64_init(&gread_cycles);
+
+	if (init_params(rwc_lf, use_jhash, htm) != 0)
+		goto err;
+	printf("\nTest: Hash add - no key-shifts, read - hit\n");
+	for (m = 0; m < 2; m++) {
+		if (m == 1) {
+			printf("\n** With bulk-lookup **\n");
+			read_type |= BULK_LOOKUP;
+		}
+		for (n = 0; n < NUM_TEST; n++) {
+			unsigned int tot_lcore = rte_lcore_count();
+			if (tot_lcore < rwc_core_cnt[n] + 1)
+				goto finish;
+
+			printf("\nNumber of readers: %u\n", rwc_core_cnt[n]);
+
+			rte_atomic64_clear(&greads);
+			rte_atomic64_clear(&gread_cycles);
+
+			rte_hash_reset(tbl_rwc_test_param.h);
+			writer_done = 0;
+			if (write_keys(key_shift) < 0)
+				goto err;
+			writer_done = 1;
+			for (i = 1; i <= rwc_core_cnt[n]; i++)
+				rte_eal_remote_launch(test_rwc_reader,
+						(void *)(uintptr_t)read_type,
+							enabled_core_ids[i]);
+			rte_eal_mp_wait_lcore();
+
+			for (i = 1; i <= rwc_core_cnt[n]; i++)
+				if (lcore_config[i].ret < 0)
+					goto err;
+
+			unsigned long long cycles_per_lookup =
+				rte_atomic64_read(&gread_cycles) /
+				rte_atomic64_read(&greads);
+			rwc_perf_results->w_no_ks_r_hit[m][n]
+						= cycles_per_lookup;
+			printf("Cycles per lookup: %llu\n", cycles_per_lookup);
+		}
+	}
+
+finish:
+	rte_hash_free(tbl_rwc_test_param.h);
+	return 0;
+
+err:
+	rte_hash_free(tbl_rwc_test_param.h);
+	return -1;
+}
+
+/*
+ * Test lookup perf:
+ * Reader(s) lookup keys absent in the table while
+ * 'Main' thread adds with no key-shifts.
+ */
+static int
+test_hash_add_no_ks_lookup_miss(struct rwc_perf *rwc_perf_results, int rwc_lf,
+				int htm)
+{
+	unsigned int n, m;
+	uint64_t i;
+	int use_jhash = 0;
+	uint8_t key_shift = 0;
+	uint8_t read_type = READ_FAIL;
+	int ret;
+
+	rte_atomic64_init(&greads);
+	rte_atomic64_init(&gread_cycles);
+
+	if (init_params(rwc_lf, use_jhash, htm) != 0)
+		goto err;
+	printf("\nTest: Hash add - no key-shifts, Hash lookup - miss\n");
+	for (m = 0; m < 2; m++) {
+		if (m == 1) {
+			printf("\n** With bulk-lookup **\n");
+			read_type |= BULK_LOOKUP;
+		}
+		for (n = 0; n < NUM_TEST; n++) {
+			unsigned int tot_lcore = rte_lcore_count();
+			if (tot_lcore < rwc_core_cnt[n] + 1)
+				goto finish;
+
+			printf("\nNumber of readers: %u\n", rwc_core_cnt[n]);
+
+			rte_atomic64_clear(&greads);
+			rte_atomic64_clear(&gread_cycles);
+
+			rte_hash_reset(tbl_rwc_test_param.h);
+			writer_done = 0;
+
+			for (i = 1; i <= rwc_core_cnt[n]; i++)
+				rte_eal_remote_launch(test_rwc_reader,
+						(void *)(uintptr_t)read_type,
+							enabled_core_ids[i]);
+			ret = write_keys(key_shift);
+			writer_done = 1;
+			rte_eal_mp_wait_lcore();
+
+			if (ret < 0)
+				goto err;
+			for (i = 1; i <= rwc_core_cnt[n]; i++)
+				if (lcore_config[i].ret < 0)
+					goto err;
+
+			unsigned long long cycles_per_lookup =
+				rte_atomic64_read(&gread_cycles) /
+				rte_atomic64_read(&greads);
+			rwc_perf_results->w_no_ks_r_miss[m][n]
+						= cycles_per_lookup;
+			printf("Cycles per lookup: %llu\n", cycles_per_lookup);
+		}
+	}
+
+finish:
+	rte_hash_free(tbl_rwc_test_param.h);
+	return 0;
+
+err:
+	rte_hash_free(tbl_rwc_test_param.h);
+	return -1;
+}
+
+/*
+ * Test lookup perf:
+ * Reader(s) lookup keys present in the table and not likely to be on the
+ * shift path  while 'Main' thread adds keys causing key-shifts.
+ */
+static int
+test_hash_add_ks_lookup_hit_non_sp(struct rwc_perf *rwc_perf_results,
+				    int rwc_lf, int htm)
+{
+	unsigned int n, m;
+	uint64_t i;
+	int use_jhash = 0;
+	int ret;
+	uint8_t key_shift;
+	uint8_t read_type = READ_PASS_NON_SHIFT_PATH;
+
+	rte_atomic64_init(&greads);
+	rte_atomic64_init(&gread_cycles);
+
+	if (init_params(rwc_lf, use_jhash, htm) != 0)
+		goto err;
+	printf("\nTest: Hash add - key shift, Hash lookup - hit"
+	       " (non-shift-path)\n");
+	for (m = 0; m < 2; m++) {
+		if (m == 1) {
+			printf("\n** With bulk-lookup **\n");
+			read_type |= BULK_LOOKUP;
+		}
+		for (n = 0; n < NUM_TEST; n++) {
+			unsigned int tot_lcore = rte_lcore_count();
+			if (tot_lcore < rwc_core_cnt[n] + 1)
+				goto finish;
+
+			printf("\nNumber of readers: %u\n", rwc_core_cnt[n]);
+
+			rte_atomic64_clear(&greads);
+			rte_atomic64_clear(&gread_cycles);
+
+			rte_hash_reset(tbl_rwc_test_param.h);
+			writer_done = 0;
+			key_shift = 0;
+			if (write_keys(key_shift) < 0)
+				goto err;
+			for (i = 1; i <= rwc_core_cnt[n]; i++)
+				rte_eal_remote_launch(test_rwc_reader,
+						(void *)(uintptr_t)read_type,
+							enabled_core_ids[i]);
+			key_shift = 1;
+			ret = write_keys(key_shift);
+			writer_done = 1;
+			rte_eal_mp_wait_lcore();
+
+			if (ret < 0)
+				goto err;
+			for (i = 1; i <= rwc_core_cnt[n]; i++)
+				if (lcore_config[i].ret < 0)
+					goto err;
+
+			unsigned long long cycles_per_lookup =
+				rte_atomic64_read(&gread_cycles) /
+				rte_atomic64_read(&greads);
+			rwc_perf_results->w_ks_r_hit_nsp[m][n]
+						= cycles_per_lookup;
+			printf("Cycles per lookup: %llu\n", cycles_per_lookup);
+		}
+	}
+
+finish:
+	rte_hash_free(tbl_rwc_test_param.h);
+	return 0;
+
+err:
+	rte_hash_free(tbl_rwc_test_param.h);
+	return -1;
+}
+
+/*
+ * Test lookup perf:
+ * Reader(s) lookup keys present in the table and likely on the shift-path while
+ * 'Main' thread adds keys causing key-shifts.
+ */
+static int
+test_hash_add_ks_lookup_hit_sp(struct rwc_perf *rwc_perf_results, int rwc_lf,
+				int htm)
+{
+	unsigned int n, m;
+	uint64_t i;
+	int use_jhash = 0;
+	int ret;
+	uint8_t key_shift;
+	uint8_t read_type = READ_PASS_SHIFT_PATH;
+
+	rte_atomic64_init(&greads);
+	rte_atomic64_init(&gread_cycles);
+
+	if (init_params(rwc_lf, use_jhash, htm) != 0)
+		goto err;
+	printf("\nTest: Hash add - key shift, Hash lookup - hit (shift-path)"
+	       "\n");
+
+	for (m = 0; m < 2; m++) {
+		if (m == 1) {
+			printf("\n** With bulk-lookup **\n");
+			read_type |= BULK_LOOKUP;
+		}
+		for (n = 0; n < NUM_TEST; n++) {
+			unsigned int tot_lcore = rte_lcore_count();
+			if (tot_lcore < rwc_core_cnt[n])
+				goto finish;
+
+			printf("\nNumber of readers: %u\n", rwc_core_cnt[n]);
+			rte_atomic64_clear(&greads);
+			rte_atomic64_clear(&gread_cycles);
+
+			rte_hash_reset(tbl_rwc_test_param.h);
+			writer_done = 0;
+			key_shift = 0;
+			if (write_keys(key_shift) < 0)
+				goto err;
+			for (i = 1; i <= rwc_core_cnt[n]; i++)
+				rte_eal_remote_launch(test_rwc_reader,
+						(void *)(uintptr_t)read_type,
+						enabled_core_ids[i]);
+			key_shift = 1;
+			ret = write_keys(key_shift);
+			writer_done = 1;
+			rte_eal_mp_wait_lcore();
+
+			if (ret < 0)
+				goto err;
+			for (i = 1; i <= rwc_core_cnt[n]; i++)
+				if (lcore_config[i].ret < 0)
+					goto err;
+
+			unsigned long long cycles_per_lookup =
+				rte_atomic64_read(&gread_cycles) /
+				rte_atomic64_read(&greads);
+			rwc_perf_results->w_ks_r_hit_sp[m][n]
+						= cycles_per_lookup;
+			printf("Cycles per lookup: %llu\n", cycles_per_lookup);
+		}
+	}
+
+finish:
+	rte_hash_free(tbl_rwc_test_param.h);
+	return 0;
+
+err:
+	rte_hash_free(tbl_rwc_test_param.h);
+	return -1;
+}
+
+/*
+ * Test lookup perf:
+ * Reader(s) lookup keys absent in the table while
+ * 'Main' thread adds keys causing key-shifts.
+ */
+static int
+test_hash_add_ks_lookup_miss(struct rwc_perf *rwc_perf_results, int rwc_lf, int
+			     htm)
+{
+	unsigned int n, m;
+	uint64_t i;
+	int use_jhash = 0;
+	int ret;
+	uint8_t key_shift;
+	uint8_t read_type = READ_FAIL;
+
+	rte_atomic64_init(&greads);
+	rte_atomic64_init(&gread_cycles);
+
+	if (init_params(rwc_lf, use_jhash, htm) != 0)
+		goto err;
+	printf("\nTest: Hash add - key shift, Hash lookup - miss\n");
+	for (m = 0; m < 2; m++) {
+		if (m == 1) {
+			printf("\n** With bulk-lookup **\n");
+			read_type |= BULK_LOOKUP;
+		}
+		for (n = 0; n < NUM_TEST; n++) {
+			unsigned int tot_lcore = rte_lcore_count();
+			if (tot_lcore < rwc_core_cnt[n] + 1)
+				goto finish;
+
+			printf("\nNumber of readers: %u\n", rwc_core_cnt[n]);
+
+			rte_atomic64_clear(&greads);
+			rte_atomic64_clear(&gread_cycles);
+
+			rte_hash_reset(tbl_rwc_test_param.h);
+			writer_done = 0;
+			key_shift = 0;
+			if (write_keys(key_shift) < 0)
+				goto err;
+			for (i = 1; i <= rwc_core_cnt[n]; i++)
+				rte_eal_remote_launch(test_rwc_reader,
+						(void *)(uintptr_t)read_type,
+							enabled_core_ids[i]);
+			key_shift = 1;
+			ret = write_keys(key_shift);
+			writer_done = 1;
+			rte_eal_mp_wait_lcore();
+
+			if (ret < 0)
+				goto err;
+			for (i = 1; i <= rwc_core_cnt[n]; i++)
+				if (lcore_config[i].ret < 0)
+					goto err;
+
+			unsigned long long cycles_per_lookup =
+				rte_atomic64_read(&gread_cycles) /
+				rte_atomic64_read(&greads);
+			rwc_perf_results->w_ks_r_miss[m][n] = cycles_per_lookup;
+			printf("Cycles per lookup: %llu\n", cycles_per_lookup);
+		}
+	}
+
+finish:
+	rte_hash_free(tbl_rwc_test_param.h);
+	return 0;
+
+err:
+	rte_hash_free(tbl_rwc_test_param.h);
+	return -1;
+}
+
+/*
+ * Test lookup perf for multi-writer:
+ * Reader(s) lookup keys present in the table and likely on the shift-path while
+ * Writers add keys causing key-shiftsi.
+ * Writers are running in parallel, on different data plane cores.
+ */
+static int
+test_hash_multi_add_lookup(struct rwc_perf *rwc_perf_results, int rwc_lf,
+			   int htm)
+{
+	unsigned int n, m, k;
+	uint64_t i;
+	int use_jhash = 0;
+	uint8_t key_shift;
+	uint8_t read_type = READ_PASS_SHIFT_PATH;
+
+	rte_atomic64_init(&greads);
+	rte_atomic64_init(&gread_cycles);
+
+	if (init_params(rwc_lf, use_jhash, htm) != 0)
+		goto err;
+	printf("\nTest: Multi-add-lookup\n");
+	uint8_t pos_core;
+	for (m = 1; m < NUM_TEST; m++) {
+		/* Calculate keys added by each writer */
+		tbl_rwc_test_param.single_insert =
+			tbl_rwc_test_param.count_keys_ks / rwc_core_cnt[m];
+		for (k = 0; k < 2; k++) {
+			if (k == 1) {
+				printf("\n** With bulk-lookup **\n");
+				read_type |= BULK_LOOKUP;
+			}
+			for (n = 0; n < NUM_TEST; n++) {
+				unsigned int tot_lcore	= rte_lcore_count();
+				if (tot_lcore < (rwc_core_cnt[n] +
+				     rwc_core_cnt[m] + 1))
+					goto finish;
+
+				printf("\nNumber of writers: %u",
+				       rwc_core_cnt[m]);
+				printf("\nNumber of readers: %u\n",
+				       rwc_core_cnt[n]);
+
+				rte_atomic64_clear(&greads);
+				rte_atomic64_clear(&gread_cycles);
+
+				rte_hash_reset(tbl_rwc_test_param.h);
+				writer_done = 0;
+				for (i = 0; i < 4; i++)
+					multi_writer_done[i] = 0;
+				key_shift = 0;
+				if (write_keys(key_shift) < 0)
+					goto err;
+
+				/* Launch reader(s) */
+				for (i = 1; i <= rwc_core_cnt[n]; i++)
+					rte_eal_remote_launch(test_rwc_reader,
+						(void *)(uintptr_t)read_type,
+						enabled_core_ids[i]);
+				key_shift = 1;
+				pos_core = 0;
+
+				/* Launch writers */
+				for (; i <= rwc_core_cnt[m]
+				     + rwc_core_cnt[n];	i++) {
+					rte_eal_remote_launch
+						(test_rwc_multi_writer,
+						(void *)(uintptr_t)pos_core,
+						enabled_core_ids[i]);
+					pos_core++;
+				}
+
+				/* Wait for writers to complete */
+				for (i = 0; i < rwc_core_cnt[m]; i++)
+					while
+						(multi_writer_done[i] == 0);
+				writer_done = 1;
+
+				rte_eal_mp_wait_lcore();
+
+				for (i = 1; i <= rwc_core_cnt[n]; i++)
+					if (lcore_config[i].ret < 0)
+						goto err;
+
+				unsigned long long cycles_per_lookup =
+					rte_atomic64_read(&gread_cycles)
+					/ rte_atomic64_read(&greads);
+				rwc_perf_results->multi_rw[m][k][n]
+					= cycles_per_lookup;
+				printf("Cycles per lookup: %llu\n",
+				       cycles_per_lookup);
+			}
+		}
+	}
+
+finish:
+	rte_hash_free(tbl_rwc_test_param.h);
+	return 0;
+
+err:
+	rte_hash_free(tbl_rwc_test_param.h);
+	return -1;
+}
+
+static int
+test_hash_readwrite_lf_main(void)
+{
+	/*
+	 * Variables used to choose different tests.
+	 * rwc_lf indicates if read-write concurrency lock-free support is
+	 * enabled.
+	 * htm indicates if Hardware transactional memory support is enabled.
+	 */
+	int rwc_lf = 0;
+	int htm;
+	int use_jhash = 0;
+	if (rte_lcore_count() == 1) {
+		printf("More than one lcore is required "
+			"to do read write lock-free concurrency test\n");
+		return -1;
+	}
+
+	setlocale(LC_NUMERIC, "");
+
+	if (rte_tm_supported())
+		htm = 1;
+	else
+		htm = 0;
+
+	if (init_params(rwc_lf, use_jhash, htm) != 0)
+		return -1;
+	if (generate_keys() != 0)
+		return -1;
+	if (get_enabled_cores_list() != 0)
+		return -1;
+
+	if (RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF) {
+		rwc_lf = 1;
+		printf("Test lookup with read-write concurrency lock free support"
+		       " enabled\n");
+		if (test_hash_add_no_ks_lookup_hit(&rwc_lf_results, rwc_lf,
+							htm) < 0)
+			return -1;
+		if (test_hash_add_no_ks_lookup_miss(&rwc_lf_results, rwc_lf,
+							htm) < 0)
+			return -1;
+		if (test_hash_add_ks_lookup_hit_non_sp(&rwc_lf_results, rwc_lf,
+							htm) < 0)
+			return -1;
+		if (test_hash_add_ks_lookup_hit_sp(&rwc_lf_results, rwc_lf,
+							htm) < 0)
+			return -1;
+		if (test_hash_add_ks_lookup_miss(&rwc_lf_results, rwc_lf, htm)
+							< 0)
+			return -1;
+		if (test_hash_multi_add_lookup(&rwc_lf_results, rwc_lf, htm)
+							< 0)
+			return -1;
+	}
+	printf("\nTest lookup with read-write concurrency lock free support"
+	       " disabled\n");
+	rwc_lf = 0;
+	if (!htm) {
+		printf("With HTM Disabled\n");
+		if (!RUN_WITH_HTM_DISABLED) {
+			printf("Enable RUN_WITH_HTM_DISABLED to test with"
+			       " lock-free disabled");
+			goto results;
+		}
+	} else
+		printf("With HTM Enabled\n");
+	if (test_hash_add_no_ks_lookup_hit(&rwc_non_lf_results, rwc_lf, htm)
+						< 0)
+		return -1;
+	if (test_hash_add_no_ks_lookup_miss(&rwc_non_lf_results, rwc_lf, htm)
+						< 0)
+		return -1;
+	if (test_hash_add_ks_lookup_hit_non_sp(&rwc_non_lf_results, rwc_lf,
+						htm) < 0)
+		return -1;
+	if (test_hash_add_ks_lookup_hit_sp(&rwc_non_lf_results, rwc_lf, htm)
+						< 0)
+		return -1;
+	if (test_hash_add_ks_lookup_miss(&rwc_non_lf_results, rwc_lf, htm) < 0)
+		return -1;
+	if (test_hash_multi_add_lookup(&rwc_non_lf_results, rwc_lf, htm) < 0)
+		return -1;
+results:
+	printf("\n\t\t\t\t\t\t********** Results summary **********\n\n");
+	int i, j, k;
+	for (j = 0; j < 2; j++) {
+		if (j == 1)
+			printf("\n\t\t\t\t\t#######********** Bulk Lookup "
+			       "**********#######\n\n");
+		printf("_______\t\t_______\t\t_________\t___\t\t_________\t\t"
+			"\t\t\t\t_________________\n");
+		printf("Writers\t\tReaders\t\tLock-free\tHTM\t\tTest-case\t\t\t"
+		       "\t\t\tCycles per lookup\n");
+		printf("_______\t\t_______\t\t_________\t___\t\t_________\t\t\t"
+		       "\t\t\t_________________\n");
+		for (i = 0; i < NUM_TEST; i++) {
+			printf("%u\t\t%u\t\t", 1, rwc_core_cnt[i]);
+			printf("Enabled\t\t");
+			printf("N/A\t\t");
+			printf("Hash add - no key-shifts, lookup - hit\t\t\t\t"
+				"%u\n\t\t\t\t\t\t\t\t",
+				rwc_lf_results.w_no_ks_r_hit[j][i]);
+			printf("Hash add - no key-shifts, lookup - miss\t\t\t\t"
+				"%u\n\t\t\t\t\t\t\t\t",
+				rwc_lf_results.w_no_ks_r_miss[j][i]);
+			printf("Hash add - key-shifts, lookup - hit"
+			       "(non-shift-path)\t\t%u\n\t\t\t\t\t\t\t\t",
+			       rwc_lf_results.w_ks_r_hit_nsp[j][i]);
+			printf("Hash add - key-shifts, lookup - hit "
+			       "(shift-path)\t\t%u\n\t\t\t\t\t\t\t\t",
+			       rwc_lf_results.w_ks_r_hit_sp[j][i]);
+			printf("Hash add - key-shifts, Hash lookup miss\t\t\t\t"
+				"%u\n\n\t\t\t\t",
+				rwc_lf_results.w_ks_r_miss[j][i]);
+
+			printf("Disabled\t");
+			if (htm)
+				printf("Enabled\t\t");
+			else
+				printf("Disabled\t");
+			printf("Hash add - no key-shifts, lookup - hit\t\t\t\t"
+				"%u\n\t\t\t\t\t\t\t\t",
+				rwc_non_lf_results.w_no_ks_r_hit[j][i]);
+			printf("Hash add - no key-shifts, lookup - miss\t\t\t\t"
+				"%u\n\t\t\t\t\t\t\t\t",
+				rwc_non_lf_results.w_no_ks_r_miss[j][i]);
+			printf("Hash add - key-shifts, lookup - hit "
+			       "(non-shift-path)\t\t%u\n\t\t\t\t\t\t\t\t",
+			       rwc_non_lf_results.w_ks_r_hit_nsp[j][i]);
+			printf("Hash add - key-shifts, lookup - hit "
+			       "(shift-path)\t\t%u\n\t\t\t\t\t\t\t\t",
+			       rwc_non_lf_results.w_ks_r_hit_sp[j][i]);
+			printf("Hash add - key-shifts, Hash lookup miss\t\t\t\t"
+			       "%u\n", rwc_non_lf_results.w_ks_r_miss[j][i]);
+
+			printf("_______\t\t_______\t\t_________\t___\t\t"
+			       "_________\t\t\t\t\t\t_________________\n");
+		}
+
+		for (i = 1; i < NUM_TEST; i++) {
+			for (k = 0; k < NUM_TEST; k++) {
+				printf("%u", rwc_core_cnt[i]);
+				printf("\t\t%u\t\t", rwc_core_cnt[k]);
+				printf("Enabled\t\t");
+				printf("N/A\t\t");
+				printf("Multi-add-lookup\t\t\t\t\t\t%u\n\n\t\t"
+				       "\t\t",
+				       rwc_lf_results.multi_rw[i][j][k]);
+				printf("Disabled\t");
+				if (htm)
+					printf("Enabled\t\t");
+				else
+					printf("Disabled\t");
+				printf("Multi-add-lookup\t\t\t\t\t\t%u\n",
+				       rwc_non_lf_results.multi_rw[i][j][k]);
+
+				printf("_______\t\t_______\t\t_________\t___"
+				       "\t\t_________\t\t\t\t\t\t"
+				       "_________________\n");
+			}
+		}
+	}
+	rte_free(tbl_rwc_test_param.keys);
+	rte_free(tbl_rwc_test_param.keys_no_ks);
+	rte_free(tbl_rwc_test_param.keys_ks);
+	rte_free(tbl_rwc_test_param.keys_absent);
+	rte_free(tbl_rwc_test_param.keys_shift_path);
+	rte_free(scanned_bkts);
+	return 0;
+}
+
+REGISTER_TEST_COMMAND(hash_readwrite_lf_autotest, test_hash_readwrite_lf_main);
-- 
2.7.4

  parent reply	other threads:[~2018-10-24  1:32 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-24  1:32 [dpdk-dev] [PATCH v6 0/5] Address reader-writer concurrency in rte_hash Honnappa Nagarahalli
2018-10-24  1:32 ` [dpdk-dev] [PATCH v6 1/5] hash: separate multi-writer from rw-concurrency Honnappa Nagarahalli
2018-10-24  1:32 ` [dpdk-dev] [PATCH v6 2/5] hash: support do not free on delete Honnappa Nagarahalli
2018-10-25 22:55   ` Thomas Monjalon
2018-10-26  1:20     ` Honnappa Nagarahalli
2018-10-24  1:32 ` [dpdk-dev] [PATCH v6 3/5] hash: fix key store element alignment Honnappa Nagarahalli
2018-10-24  1:32 ` [dpdk-dev] [PATCH v6 4/5] hash: add lock-free read-write concurrency Honnappa Nagarahalli
2018-10-24  1:32 ` Honnappa Nagarahalli [this message]
2018-10-25 22:56 ` [dpdk-dev] [PATCH v6 0/5] Address reader-writer concurrency in rte_hash Thomas Monjalon
2018-10-26  0:48   ` Honnappa Nagarahalli
2018-10-26  8:38     ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1540344746-29045-6-git-send-email-honnappa.nagarahalli@arm.com \
    --to=honnappa.nagarahalli@arm.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=dharmik.thakkar@arm.com \
    --cc=gavin.hu@arm.com \
    --cc=nd@arm.com \
    --cc=pablo.de.lara.guarch@intel.com \
    --cc=yipeng1.wang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).