From: Dekel Peled <dekelp@mellanox.com>
To: yskoh@mellanox.com, shahafs@mellanox.com
Cc: dev@dpdk.org, orika@mellanox.com
Subject: [dpdk-dev] [PATCH 2/2] net/mlx5: add NVGRE encap decap to Direct Verbs
Date: Wed, 24 Oct 2018 14:08:19 +0300 [thread overview]
Message-ID: <1540379299-23764-3-git-send-email-dekelp@mellanox.com> (raw)
In-Reply-To: <1540379299-23764-1-git-send-email-dekelp@mellanox.com>
This patch adds support for NVGRE encap and decap operations, in
Direct Verbs flow.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
---
drivers/net/mlx5/mlx5_flow.h | 2 +
drivers/net/mlx5/mlx5_flow_dv.c | 144 ++++++++++++++++++++++++----------------
2 files changed, 89 insertions(+), 57 deletions(-)
diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
index 9c28e50..dd7c3db 100644
--- a/drivers/net/mlx5/mlx5_flow.h
+++ b/drivers/net/mlx5/mlx5_flow.h
@@ -94,6 +94,8 @@
#define MLX5_FLOW_ACTION_SET_MAC_DST (1u << 21)
#define MLX5_FLOW_ACTION_VXLAN_ENCAP (1u << 22)
#define MLX5_FLOW_ACTION_VXLAN_DECAP (1u << 23)
+#define MLX5_FLOW_ACTION_NVGRE_ENCAP (1u << 24)
+#define MLX5_FLOW_ACTION_NVGRE_DECAP (1u << 25)
#define MLX5_FLOW_FATE_ACTIONS \
(MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE | MLX5_FLOW_ACTION_RSS)
diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index 06ecabf..ca87ae8 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -43,7 +43,7 @@
* Encap buf length, max:
* Eth:14/VLAN:8/IPv6:40/TCP:36/TUNNEL:20/Eth:14
*/
-#define MLX5_ENCAP_LEN 132
+#define MLX5_ENCAP_MAX_LEN 132
/**
* Validate META item.
@@ -107,7 +107,8 @@
}
/**
- * Validate the vxlan encap action.
+ * Validate the L2 encap action.
+ * Used for VXLAN and NVGRE encap actions.
*
* @param[in] action_flags
* Holds the actions detected until now.
@@ -122,14 +123,12 @@
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-flow_dv_validate_action_vxlan_encap(uint64_t action_flags,
- const struct rte_flow_action *action,
- const struct rte_flow_attr *attr,
- struct rte_flow_error *error)
+flow_dv_validate_action_l2_encap(uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
{
- const struct rte_flow_action_vxlan_encap *vxlan_encap = action->conf;
-
- if (!vxlan_encap)
+ if (!(action->conf))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"configuration cannot be null");
@@ -137,11 +136,14 @@
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't drop and encap in same flow");
- if (action_flags & MLX5_FLOW_ACTION_VXLAN_ENCAP)
+ if (action_flags & (MLX5_FLOW_ACTION_VXLAN_ENCAP |
+ MLX5_FLOW_ACTION_VXLAN_DECAP |
+ MLX5_FLOW_ACTION_NVGRE_ENCAP |
+ MLX5_FLOW_ACTION_NVGRE_DECAP))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
- "can't have 2 encap actions in same"
- " flow");
+ "can have a single encap or decap"
+ " action in a flow");
if (attr->ingress)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
@@ -152,7 +154,8 @@
}
/**
- * Validate the vxlan decap action.
+ * Validate the L2 decap action.
+ * Used for VXLAN and NVGRE decap actions.
*
* @param[in] action_flags
* Holds the actions detected until now.
@@ -167,7 +170,7 @@
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-flow_dv_validate_action_vxlan_decap(uint64_t action_flags,
+flow_dv_validate_action_l2_decap(uint64_t action_flags,
const struct rte_flow_action *action __rte_unused,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
@@ -176,10 +179,14 @@
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't drop and decap in same flow");
- if (action_flags & MLX5_FLOW_ACTION_VXLAN_ENCAP)
+ if (action_flags & (MLX5_FLOW_ACTION_VXLAN_ENCAP |
+ MLX5_FLOW_ACTION_VXLAN_DECAP |
+ MLX5_FLOW_ACTION_NVGRE_ENCAP |
+ MLX5_FLOW_ACTION_NVGRE_DECAP))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
- "can't encap and decap in same flow");
+ "can have a single encap or decap"
+ " action in a flow");
if (attr->egress)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
@@ -190,18 +197,18 @@
}
static size_t item_len[] = {
- [RTE_FLOW_ITEM_TYPE_VOID] = 0,
- [RTE_FLOW_ITEM_TYPE_ETH] = sizeof(struct rte_flow_item_eth),
- [RTE_FLOW_ITEM_TYPE_VLAN] = sizeof(struct rte_flow_item_vlan),
- [RTE_FLOW_ITEM_TYPE_IPV4] = sizeof(struct rte_flow_item_ipv4),
- [RTE_FLOW_ITEM_TYPE_IPV6] = sizeof(struct rte_flow_item_ipv6),
- [RTE_FLOW_ITEM_TYPE_UDP] = sizeof(struct rte_flow_item_udp),
- [RTE_FLOW_ITEM_TYPE_TCP] = sizeof(struct rte_flow_item_tcp),
- [RTE_FLOW_ITEM_TYPE_VXLAN] = sizeof(struct rte_flow_item_vxlan),
- [RTE_FLOW_ITEM_TYPE_GRE] = sizeof(struct rte_flow_item_gre),
- [RTE_FLOW_ITEM_TYPE_NVGRE] = sizeof(struct rte_flow_item_gre),
+ [RTE_FLOW_ITEM_TYPE_VOID] = 0,
+ [RTE_FLOW_ITEM_TYPE_ETH] = sizeof(struct rte_flow_item_eth),
+ [RTE_FLOW_ITEM_TYPE_VLAN] = sizeof(struct rte_flow_item_vlan),
+ [RTE_FLOW_ITEM_TYPE_IPV4] = sizeof(struct rte_flow_item_ipv4),
+ [RTE_FLOW_ITEM_TYPE_IPV6] = sizeof(struct rte_flow_item_ipv6),
+ [RTE_FLOW_ITEM_TYPE_UDP] = sizeof(struct rte_flow_item_udp),
+ [RTE_FLOW_ITEM_TYPE_TCP] = sizeof(struct rte_flow_item_tcp),
+ [RTE_FLOW_ITEM_TYPE_VXLAN] = sizeof(struct rte_flow_item_vxlan),
+ [RTE_FLOW_ITEM_TYPE_GRE] = sizeof(struct rte_flow_item_gre),
+ [RTE_FLOW_ITEM_TYPE_NVGRE] = sizeof(struct rte_flow_item_nvgre),
[RTE_FLOW_ITEM_TYPE_VXLAN_GPE] = sizeof(struct rte_flow_item_vxlan_gpe),
- [RTE_FLOW_ITEM_TYPE_MPLS] = sizeof(struct rte_flow_item_mpls),
+ [RTE_FLOW_ITEM_TYPE_MPLS] = sizeof(struct rte_flow_item_mpls),
};
/**
@@ -222,8 +229,9 @@
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-flow_dv_convert_encap(struct rte_flow_item *item, uint8_t *buf, size_t *size,
- struct rte_flow_error *error, uint16_t l3_type)
+flow_dv_convert_encap(const struct rte_flow_item *item, uint8_t *buf,
+ size_t *size, struct rte_flow_error *error,
+ uint16_t l3_type)
{
struct ether_hdr *eth = NULL;
struct vlan_hdr *vlan = NULL;
@@ -237,9 +245,8 @@
assert(item);
*size = 0;
for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
- /* TODO: variable length handling: raw, vxlan and nvgre. */
len = item_len[item->type];
- if (len + *size > MLX5_ENCAP_LEN)
+ if (len + *size > MLX5_ENCAP_MAX_LEN)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
(void *)item->type,
@@ -361,7 +368,8 @@
}
/**
- * Convert VXLAN encap action to DV specification.
+ * Convert L2 encap action to DV specification.
+ * Used for VXLAN and NVGRE encap actions.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
@@ -374,20 +382,25 @@
* Pointer to action on success, NULL otherwise and rte_errno is set.
*/
static struct ibv_flow_action *
-flow_dv_create_vxlan_encap(struct rte_eth_dev *dev,
- const struct rte_flow_action *action,
- struct rte_flow_error *error)
+flow_dv_create_l2_encap(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
{
struct ibv_flow_action *encap_verb = NULL;
- const struct rte_flow_action_vxlan_encap *encap_data;
+ const struct rte_flow_item *encap_data;
struct priv *priv = dev->data->dev_private;
- uint8_t buf[MLX5_ENCAP_LEN];
+ uint8_t buf[MLX5_ENCAP_MAX_LEN];
size_t size = 0;
int convert_result;
- encap_data = (const struct rte_flow_action_vxlan_encap *)action->conf;
- convert_result = flow_dv_convert_encap(encap_data->definition,
- buf, &size, error, 0);
+ if (action->type == RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP)
+ encap_data = ((const struct rte_flow_action_vxlan_encap *)
+ action->conf)->definition;
+ else
+ encap_data = ((const struct rte_flow_action_nvgre_encap *)
+ action->conf)->definition;
+ convert_result = flow_dv_convert_encap(encap_data, buf, &size,
+ error, 0);
if (convert_result)
return NULL;
encap_verb = mlx5_glue->dv_create_flow_action_packet_reformat
@@ -396,12 +409,13 @@
MLX5DV_FLOW_TABLE_TYPE_NIC_TX);
if (!encap_verb)
rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
- NULL, "cannot create vxlan encap action");
+ NULL, "cannot create L2 encap action");
return encap_verb;
}
/**
- * Convert VXLAN decap action to DV specification.
+ * Convert L2 decap action to DV specification.
+ * Used for VXLAN and NVGRE decap actions.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
@@ -414,9 +428,9 @@
* Pointer to action on success, NULL otherwise and rte_errno is set.
*/
static struct ibv_flow_action *
-flow_dv_create_vxlan_decap(struct rte_eth_dev *dev,
- const struct rte_flow_action *action __rte_unused,
- struct rte_flow_error *error)
+flow_dv_create_l2_decap(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action __rte_unused,
+ struct rte_flow_error *error)
{
struct ibv_flow_action *decap_verb = NULL;
struct priv *priv = dev->data->dev_private;
@@ -683,21 +697,29 @@
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
- ret = flow_dv_validate_action_vxlan_encap(action_flags,
- actions, attr,
- error);
+ case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
+ ret = flow_dv_validate_action_l2_encap(action_flags,
+ actions, attr,
+ error);
if (ret < 0)
return ret;
- action_flags |= MLX5_FLOW_ACTION_VXLAN_ENCAP;
+ action_flags |= (actions->type ==
+ RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP) ?
+ MLX5_FLOW_ACTION_VXLAN_ENCAP :
+ MLX5_FLOW_ACTION_NVGRE_ENCAP;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
- ret = flow_dv_validate_action_vxlan_decap(action_flags,
- actions, attr,
- error);
+ case RTE_FLOW_ACTION_TYPE_NVGRE_DECAP:
+ ret = flow_dv_validate_action_l2_decap(action_flags,
+ actions, attr,
+ error);
if (ret < 0)
return ret;
- action_flags |= MLX5_FLOW_ACTION_VXLAN_DECAP;
+ action_flags |= (actions->type ==
+ RTE_FLOW_ACTION_TYPE_VXLAN_DECAP) ?
+ MLX5_FLOW_ACTION_VXLAN_DECAP :
+ MLX5_FLOW_ACTION_NVGRE_DECAP;
++actions_n;
break;
default:
@@ -1473,27 +1495,35 @@
flow->actions |= MLX5_FLOW_ACTION_RSS;
break;
case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
+ case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
dev_flow->dv.actions[actions_n].type =
MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
dev_flow->dv.actions[actions_n].action =
- flow_dv_create_vxlan_encap(dev, action, error);
+ flow_dv_create_l2_encap(dev, action, error);
if (!(dev_flow->dv.actions[actions_n].action))
return -rte_errno;
dev_flow->dv.encap_verb =
dev_flow->dv.actions[actions_n].action;
- flow->actions |= MLX5_FLOW_ACTION_VXLAN_ENCAP;
+ flow->actions |=
+ (action->type == RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP ?
+ MLX5_FLOW_ACTION_VXLAN_ENCAP :
+ MLX5_FLOW_ACTION_NVGRE_ENCAP);
actions_n++;
break;
case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
+ case RTE_FLOW_ACTION_TYPE_NVGRE_DECAP:
dev_flow->dv.actions[actions_n].type =
MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
dev_flow->dv.actions[actions_n].action =
- flow_dv_create_vxlan_decap(dev, action, error);
+ flow_dv_create_l2_decap(dev, action, error);
if (!(dev_flow->dv.actions[actions_n].action))
return -rte_errno;
dev_flow->dv.decap_verb =
dev_flow->dv.actions[actions_n].action;
- flow->actions |= MLX5_FLOW_ACTION_VXLAN_DECAP;
+ flow->actions |=
+ (action->type == RTE_FLOW_ACTION_TYPE_VXLAN_DECAP ?
+ MLX5_FLOW_ACTION_VXLAN_DECAP :
+ MLX5_FLOW_ACTION_NVGRE_DECAP);
actions_n++;
break;
default:
--
1.8.3.1
next prev parent reply other threads:[~2018-10-24 11:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-24 11:08 [dpdk-dev] [PATCH 0/2] net/mlx5: add L2 encap and " Dekel Peled
2018-10-24 11:08 ` [dpdk-dev] [PATCH 1/2] net/mlx5: add VXLAN encap " Dekel Peled
2018-10-24 12:59 ` Ori Kam
2018-10-25 5:53 ` Dekel Peled
2018-10-24 11:08 ` Dekel Peled [this message]
2018-10-24 13:47 ` [dpdk-dev] [PATCH 2/2] net/mlx5: add NVGRE " Ori Kam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1540379299-23764-3-git-send-email-dekelp@mellanox.com \
--to=dekelp@mellanox.com \
--cc=dev@dpdk.org \
--cc=orika@mellanox.com \
--cc=shahafs@mellanox.com \
--cc=yskoh@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).