From: wei zhao <wei.zhao1@intel.com>
To: wei.zhao1@intel.com, dev@dpdk.org
Cc: stable@dpdk.org, qi.z.zhang@intel.com,
yamashita.hideyuki@po.ntt-tx.co.jp, stephen@networkplumber.org
Subject: [dpdk-dev] [PATCH v2] net/ixgbe: check jumbo frame enable parameter
Date: Thu, 1 Nov 2018 16:28:36 +0800 [thread overview]
Message-ID: <1541060916-39754-1-git-send-email-wei.zhao1@intel.com> (raw)
In-Reply-To: <1541058926-3576-1-git-send-email-wei.zhao1@intel.com>
There is necessary to do some check of max packet size boundary
for code safe in order to avoid error in register setting
when enable jumbo.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
---
v2:
-add more log infomation and fix build issue
---
drivers/net/ixgbe/ixgbe_ethdev.c | 4 +---
drivers/net/ixgbe/ixgbe_ethdev.h | 2 ++
drivers/net/ixgbe/ixgbe_rxtx.c | 31 +++++++++++++++++++++++++++++++
3 files changed, 34 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 5a2c351..d65a911 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -173,8 +173,6 @@ static int ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev *eth_dev,
uint8_t is_rx);
static int ixgbe_fw_version_get(struct rte_eth_dev *dev, char *fw_version,
size_t fw_size);
-static void ixgbe_dev_info_get(struct rte_eth_dev *dev,
- struct rte_eth_dev_info *dev_info);
static const uint32_t *ixgbe_dev_supported_ptypes_get(struct rte_eth_dev *dev);
static void ixgbevf_dev_info_get(struct rte_eth_dev *dev,
struct rte_eth_dev_info *dev_info);
@@ -3692,7 +3690,7 @@ static int ixgbevf_dev_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
return 0;
}
-static void
+void
ixgbe_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
{
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index d0b9396..a474be4 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -727,6 +727,8 @@ int ixgbe_action_rss_same(const struct rte_flow_action_rss *comp,
const struct rte_flow_action_rss *with);
int ixgbe_config_rss_filter(struct rte_eth_dev *dev,
struct ixgbe_rte_flow_rss_conf *conf, bool add);
+void ixgbe_dev_info_get(struct rte_eth_dev *dev,
+ struct rte_eth_dev_info *dev_info);
static inline int
ixgbe_ethertype_filter_lookup(struct ixgbe_filter_info *filter_info,
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
index 2f0262a..94051ca 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx.c
@@ -4814,6 +4814,34 @@ void __attribute__((cold))
return 0;
}
+static int __attribute__((cold))
+ixgbe_dev_jumboenable_check(struct rte_eth_dev *dev,
+ uint16_t max_rx_pkt_len)
+{
+ struct rte_eth_dev_info dev_info;
+
+ ixgbe_dev_info_get(dev, &dev_info);
+
+ /* check that max packet size is within the allowed range */
+ if (max_rx_pkt_len < ETHER_MIN_MTU) {
+ PMD_INIT_LOG(ERR, "max packet size is too small.");
+ return -EINVAL;
+ }
+
+ if (max_rx_pkt_len > dev_info.max_rx_pktlen) {
+ PMD_INIT_LOG(ERR, "max packet size is too big.");
+ return -EINVAL;
+ }
+
+ /* check jumbo mode if needed */
+ if (max_rx_pkt_len < ETHER_MAX_LEN) {
+ PMD_INIT_LOG(ERR, "No need to enable jumbo.");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/*
* Initializes Receive Unit.
*/
@@ -4865,6 +4893,9 @@ int __attribute__((cold))
* Configure jumbo frame support, if any.
*/
if (rx_conf->offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
+ if (ixgbe_dev_jumboenable_check(dev, rx_conf->max_rx_pkt_len))
+ return -EINVAL;
+
hlreg0 |= IXGBE_HLREG0_JUMBOEN;
maxfrs = IXGBE_READ_REG(hw, IXGBE_MAXFRS);
maxfrs &= 0x0000FFFF;
--
1.8.3.1
next prev parent reply other threads:[~2018-11-01 8:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-01 7:55 [dpdk-dev] [PATCH] " wei zhao
2018-11-01 8:28 ` wei zhao [this message]
2018-11-01 8:40 ` [dpdk-dev] [PATCH v2] " Zhao1, Wei
2018-11-05 16:34 ` Zhang, Qi Z
2018-11-06 2:49 ` Zhao1, Wei
2018-11-01 17:46 ` [dpdk-dev] [PATCH] " Stephen Hemminger
2018-11-05 9:13 ` Zhao1, Wei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1541060916-39754-1-git-send-email-wei.zhao1@intel.com \
--to=wei.zhao1@intel.com \
--cc=dev@dpdk.org \
--cc=qi.z.zhang@intel.com \
--cc=stable@dpdk.org \
--cc=stephen@networkplumber.org \
--cc=yamashita.hideyuki@po.ntt-tx.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).