From: Dekel Peled <dekelp@mellanox.com>
To: yskoh@mellanox.com, shahafs@mellanox.com
Cc: dev@dpdk.org, orika@mellanox.com
Subject: [dpdk-dev] [PATCH v8 2/7] net/mlx5: add VXLAN encap action to Direct Verbs
Date: Thu, 1 Nov 2018 11:37:28 +0200 [thread overview]
Message-ID: <1541065053-28436-3-git-send-email-dekelp@mellanox.com> (raw)
In-Reply-To: <1540969847-48919-1-git-send-email-dekelp@mellanox.com>
This patch implements the VXLAN encap action in DV flow for MLX5 PMD.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
---
drivers/net/mlx5/mlx5_flow.h | 3 +
drivers/net/mlx5/mlx5_flow_dv.c | 349 +++++++++++++++++++++++++++++++++++++++-
2 files changed, 347 insertions(+), 5 deletions(-)
diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
index 61299d6..286d7bb 100644
--- a/drivers/net/mlx5/mlx5_flow.h
+++ b/drivers/net/mlx5/mlx5_flow.h
@@ -92,6 +92,7 @@
#define MLX5_FLOW_ACTION_DEC_TTL (1u << 19)
#define MLX5_FLOW_ACTION_SET_MAC_SRC (1u << 20)
#define MLX5_FLOW_ACTION_SET_MAC_DST (1u << 21)
+#define MLX5_FLOW_ACTION_VXLAN_ENCAP (1u << 22)
#define MLX5_FLOW_FATE_ACTIONS \
(MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE | MLX5_FLOW_ACTION_RSS)
@@ -181,6 +182,8 @@ struct mlx5_flow_dv {
#ifdef HAVE_IBV_FLOW_DV_SUPPORT
struct mlx5dv_flow_action_attr actions[MLX5_DV_MAX_NUMBER_OF_ACTIONS];
/**< Action list. */
+ struct ibv_flow_action *encap_decap_verbs_action;
+ /**< Verbs encap/decap object. */
#endif
int actions_n; /**< number of actions. */
};
diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index 8f729f4..e44b1e6 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -34,6 +34,8 @@
#ifdef HAVE_IBV_FLOW_DV_SUPPORT
+#define MLX5_ENCAP_MAX_LEN 132
+
/**
* Validate META item.
*
@@ -96,6 +98,305 @@
}
/**
+ * Validate the L2 encap action.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the encap action.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_l2_encap(uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ if (!(action->conf))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "configuration cannot be null");
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and encap in same flow");
+ if (action_flags & MLX5_FLOW_ACTION_VXLAN_ENCAP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can only have a single encap"
+ " action in a flow");
+ if (attr->ingress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "encap action not supported for "
+ "ingress");
+ return 0;
+}
+
+/**
+ * Get the size of specific rte_flow_item_type
+ *
+ * @param[in] item_type
+ * Tested rte_flow_item_type.
+ *
+ * @return
+ * sizeof struct item_type, 0 if void or irrelevant.
+ */
+static size_t
+flow_dv_get_item_len(const enum rte_flow_item_type item_type)
+{
+ size_t retval;
+
+ switch (item_type) {
+ case RTE_FLOW_ITEM_TYPE_ETH:
+ retval = sizeof(struct rte_flow_item_eth);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VLAN:
+ retval = sizeof(struct rte_flow_item_vlan);
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV4:
+ retval = sizeof(struct rte_flow_item_ipv4);
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV6:
+ retval = sizeof(struct rte_flow_item_ipv6);
+ break;
+ case RTE_FLOW_ITEM_TYPE_UDP:
+ retval = sizeof(struct rte_flow_item_udp);
+ break;
+ case RTE_FLOW_ITEM_TYPE_TCP:
+ retval = sizeof(struct rte_flow_item_tcp);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN:
+ retval = sizeof(struct rte_flow_item_vxlan);
+ break;
+ case RTE_FLOW_ITEM_TYPE_GRE:
+ retval = sizeof(struct rte_flow_item_gre);
+ break;
+ case RTE_FLOW_ITEM_TYPE_NVGRE:
+ retval = sizeof(struct rte_flow_item_nvgre);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
+ retval = sizeof(struct rte_flow_item_vxlan_gpe);
+ break;
+ case RTE_FLOW_ITEM_TYPE_MPLS:
+ retval = sizeof(struct rte_flow_item_mpls);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VOID: /* Fall through. */
+ default:
+ retval = 0;
+ break;
+ }
+ return retval;
+};
+
+#define MLX5_ENCAP_IPV4_VERSION 0x40
+#define MLX5_ENCAP_IPV4_IHL_MIN 0x05
+#define MLX5_ENCAP_IPV4_TTL_DEF 0x40
+#define MLX5_ENCAP_IPV6_VTC_FLOW 0x60000000
+#define MLX5_ENCAP_IPV6_HOP_LIMIT 0xff
+#define MLX5_ENCAP_VXLAN_FLAGS 0x08000000
+#define MLX5_ENCAP_VXLAN_GPE_FLAGS 0x04
+
+/**
+ * Convert the encap action data from list of rte_flow_item to raw buffer
+ *
+ * @param[in] items
+ * Pointer to rte_flow_item objects list.
+ * @param[out] buf
+ * Pointer to the output buffer.
+ * @param[out] size
+ * Pointer to the output buffer size.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_encap_data(const struct rte_flow_item *items, uint8_t *buf,
+ size_t *size, struct rte_flow_error *error)
+{
+ struct ether_hdr *eth = NULL;
+ struct vlan_hdr *vlan = NULL;
+ struct ipv4_hdr *ipv4 = NULL;
+ struct ipv6_hdr *ipv6 = NULL;
+ struct udp_hdr *udp = NULL;
+ struct vxlan_hdr *vxlan = NULL;
+ struct vxlan_gpe_hdr *vxlan_gpe = NULL;
+ size_t len;
+ size_t temp_size = 0;
+
+ if (!items)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "invalid empty data");
+ for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
+ len = flow_dv_get_item_len(items->type);
+ if (len + temp_size > MLX5_ENCAP_MAX_LEN)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "items total size is too big"
+ " for encap action");
+ rte_memcpy((void *)&buf[temp_size], items->spec, len);
+ switch (items->type) {
+ case RTE_FLOW_ITEM_TYPE_ETH:
+ eth = (struct ether_hdr *)&buf[temp_size];
+ break;
+ case RTE_FLOW_ITEM_TYPE_VLAN:
+ vlan = (struct vlan_hdr *)&buf[temp_size];
+ if (!eth)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "eth header not found");
+ if (!eth->ether_type)
+ eth->ether_type = RTE_BE16(ETHER_TYPE_VLAN);
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV4:
+ ipv4 = (struct ipv4_hdr *)&buf[temp_size];
+ if (!vlan && !eth)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "neither eth nor vlan"
+ " header found");
+ if (vlan && !vlan->eth_proto)
+ vlan->eth_proto = RTE_BE16(ETHER_TYPE_IPv4);
+ else if (eth && !eth->ether_type)
+ eth->ether_type = RTE_BE16(ETHER_TYPE_IPv4);
+ if (!ipv4->version_ihl)
+ ipv4->version_ihl = MLX5_ENCAP_IPV4_VERSION |
+ MLX5_ENCAP_IPV4_IHL_MIN;
+ if (!ipv4->time_to_live)
+ ipv4->time_to_live = MLX5_ENCAP_IPV4_TTL_DEF;
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV6:
+ ipv6 = (struct ipv6_hdr *)&buf[temp_size];
+ if (!vlan && !eth)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "neither eth nor vlan"
+ " header found");
+ if (vlan && !vlan->eth_proto)
+ vlan->eth_proto = RTE_BE16(ETHER_TYPE_IPv6);
+ else if (eth && !eth->ether_type)
+ eth->ether_type = RTE_BE16(ETHER_TYPE_IPv6);
+ if (!ipv6->vtc_flow)
+ ipv6->vtc_flow =
+ RTE_BE32(MLX5_ENCAP_IPV6_VTC_FLOW);
+ if (!ipv6->hop_limits)
+ ipv6->hop_limits = MLX5_ENCAP_IPV6_HOP_LIMIT;
+ break;
+ case RTE_FLOW_ITEM_TYPE_UDP:
+ udp = (struct udp_hdr *)&buf[temp_size];
+ if (!ipv4 && !ipv6)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "ip header not found");
+ if (ipv4 && !ipv4->next_proto_id)
+ ipv4->next_proto_id = IPPROTO_UDP;
+ else if (ipv6 && !ipv6->proto)
+ ipv6->proto = IPPROTO_UDP;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN:
+ vxlan = (struct vxlan_hdr *)&buf[temp_size];
+ if (!udp)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "udp header not found");
+ if (!udp->dst_port)
+ udp->dst_port = RTE_BE16(MLX5_UDP_PORT_VXLAN);
+ if (!vxlan->vx_flags)
+ vxlan->vx_flags =
+ RTE_BE32(MLX5_ENCAP_VXLAN_FLAGS);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
+ vxlan_gpe = (struct vxlan_gpe_hdr *)&buf[temp_size];
+ if (!udp)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "udp header not found");
+ if (!vxlan_gpe->proto)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "next protocol not found");
+ if (!udp->dst_port)
+ udp->dst_port =
+ RTE_BE16(MLX5_UDP_PORT_VXLAN_GPE);
+ if (!vxlan_gpe->vx_flags)
+ vxlan_gpe->vx_flags =
+ MLX5_ENCAP_VXLAN_GPE_FLAGS;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VOID:
+ break;
+ default:
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "unsupported item type");
+ break;
+ }
+ temp_size += len;
+ }
+ *size = temp_size;
+ return 0;
+}
+
+/**
+ * Convert L2 encap action to DV specification.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in] action
+ * Pointer to action structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * Pointer to action on success, NULL otherwise and rte_errno is set.
+ */
+static struct ibv_flow_action *
+flow_dv_create_action_l2_encap(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ struct ibv_flow_action *verbs_action = NULL;
+ const struct rte_flow_item *encap_data;
+ struct priv *priv = dev->data->dev_private;
+ uint8_t buf[MLX5_ENCAP_MAX_LEN];
+ size_t size = 0;
+ int convert_result = 0;
+
+ encap_data = ((const struct rte_flow_action_vxlan_encap *)
+ action->conf)->definition;
+ convert_result = flow_dv_convert_encap_data(encap_data, buf,
+ &size, error);
+ if (convert_result)
+ return NULL;
+ verbs_action = mlx5_glue->dv_create_flow_action_packet_reformat
+ (priv->ctx, size, buf,
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L2_TUNNEL,
+ MLX5DV_FLOW_TABLE_TYPE_NIC_TX);
+ if (!verbs_action)
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "cannot create L2 encap action");
+ return verbs_action;
+}
+
+/**
* Verify the @p attributes will be correctly understood by the NIC and store
* them in the @p flow if everything is correct.
*
@@ -339,6 +640,16 @@
action_flags |= MLX5_FLOW_ACTION_COUNT;
++actions_n;
break;
+ case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
+ ret = flow_dv_validate_action_l2_encap(action_flags,
+ actions, attr,
+ error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_VXLAN_ENCAP;
+ ++actions_n;
+ break;
+
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
@@ -1045,14 +1356,23 @@
/**
* Store the requested actions in an array.
*
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
* @param[in] action
* Flow action to translate.
* @param[in, out] dev_flow
* Pointer to the mlx5_flow.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static void
-flow_dv_create_action(const struct rte_flow_action *action,
- struct mlx5_flow *dev_flow)
+static int
+flow_dv_create_action(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ struct mlx5_flow *dev_flow,
+ struct rte_flow_error *error)
{
const struct rte_flow_action_queue *queue;
const struct rte_flow_action_rss *rss;
@@ -1100,10 +1420,24 @@
/* Added to array only in apply since we need the QP */
flow->actions |= MLX5_FLOW_ACTION_RSS;
break;
+ case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
+ dev_flow->dv.actions[actions_n].type =
+ MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
+ dev_flow->dv.actions[actions_n].action =
+ flow_dv_create_action_l2_encap(dev, action,
+ error);
+ if (!(dev_flow->dv.actions[actions_n].action))
+ return -rte_errno;
+ dev_flow->dv.encap_decap_verbs_action =
+ dev_flow->dv.actions[actions_n].action;
+ flow->actions |= MLX5_FLOW_ACTION_VXLAN_ENCAP;
+ actions_n++;
+ break;
default:
break;
}
dev_flow->dv.actions_n = actions_n;
+ return 0;
}
static uint32_t matcher_zero[MLX5_ST_SZ_DW(fte_match_param)] = { 0 };
@@ -1217,7 +1551,6 @@
return 0;
}
-
/**
* Fill the flow with DV spec.
*
@@ -1272,7 +1605,8 @@
if (flow_dv_matcher_register(dev, &matcher, dev_flow, error))
return -rte_errno;
for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++)
- flow_dv_create_action(actions, dev_flow);
+ if (flow_dv_create_action(dev, actions, dev_flow, error))
+ return -rte_errno;
return 0;
}
@@ -1457,6 +1791,11 @@
LIST_REMOVE(dev_flow, next);
if (dev_flow->dv.matcher)
flow_dv_matcher_release(dev, dev_flow);
+ if (dev_flow->dv.encap_decap_verbs_action) {
+ claim_zero(mlx5_glue->destroy_flow_action
+ (dev_flow->dv.encap_decap_verbs_action));
+ dev_flow->dv.encap_decap_verbs_action = NULL;
+ }
rte_free(dev_flow);
}
}
--
1.8.3.1
next prev parent reply other threads:[~2018-11-01 9:38 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-27 14:50 [dpdk-dev] [PATCH 0/4] support DV encap and decap actions Dekel Peled
2018-09-27 14:50 ` [dpdk-dev] [PATCH 1/4] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-02 1:02 ` Yongseok Koh
2018-10-03 6:59 ` Dekel Peled
2018-09-27 14:50 ` [dpdk-dev] [PATCH 2/4] net/mlx5: add definitions for DV encap and decap Dekel Peled
2018-10-03 2:58 ` Yongseok Koh
2018-10-03 7:27 ` Dekel Peled
2018-09-27 14:50 ` [dpdk-dev] [PATCH 3/4] net/mlx5: add DV encap L2 and L3 operations Dekel Peled
2018-10-03 6:58 ` Yongseok Koh
2018-10-03 8:35 ` Dekel Peled
2018-10-03 9:32 ` Yongseok Koh
2018-10-03 11:35 ` Dekel Peled
2018-10-03 11:47 ` Dekel Peled
2018-10-03 13:55 ` Dekel Peled
2018-09-27 14:50 ` [dpdk-dev] [PATCH 4/4] net/mlx5: add DV decap " Dekel Peled
2018-10-03 7:07 ` Yongseok Koh
2018-10-03 16:14 ` Dekel Peled
2018-10-07 14:25 ` [dpdk-dev] [PATCH v2 0/4] add support of Direct Verbs encap and decap actions Dekel Peled
2018-10-09 19:25 ` [dpdk-dev] [PATCH v3 " Dekel Peled
2018-10-10 8:35 ` [dpdk-dev] [PATCH v4 " Dekel Peled
2018-10-11 12:12 ` [dpdk-dev] [PATCH v5 " Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 0/6] add encap and decap actions to Direct Verbs flow in MLX5 PMD Dekel Peled
2018-10-29 10:03 ` Shahaf Shuler
2018-10-29 14:42 ` Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 0/7] " Dekel Peled
2018-10-31 15:09 ` Shahaf Shuler
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 " Dekel Peled
2018-11-01 12:51 ` Shahaf Shuler
2018-11-01 17:17 ` Ferruh Yigit
2018-11-04 7:12 ` Shahaf Shuler
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 1/7] net/mlx5: add flow action functions to glue Dekel Peled
2018-11-01 9:37 ` Dekel Peled [this message]
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 3/7] net/mlx5: add VXLAN decap action to Direct Verbs Dekel Peled
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 4/7] net/mlx5: add NVGRE encap " Dekel Peled
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 5/7] net/mlx5: add NVGRE decap " Dekel Peled
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 6/7] net/mlx5: add raw data encap decap " Dekel Peled
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 7/7] net/mlx5: add caching of encap decap actions Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 1/7] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 2/7] net/mlx5: add VXLAN encap action to Direct Verbs Dekel Peled
2018-10-31 15:09 ` Shahaf Shuler
2018-11-01 8:22 ` Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 3/7] net/mlx5: add VXLAN decap " Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 4/7] net/mlx5: add NVGRE encap " Dekel Peled
2018-10-31 15:09 ` Shahaf Shuler
2018-11-01 9:13 ` Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 5/7] net/mlx5: add NVGRE decap " Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 6/7] net/mlx5: add raw data encap decap " Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 7/7] net/mlx5: add caching of encap decap actions Dekel Peled
2018-10-31 15:09 ` Shahaf Shuler
2018-11-01 9:15 ` Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 1/6] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-29 10:03 ` Shahaf Shuler
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 2/6] net/mlx5: add VXLAN encap action to Direct Verbs Dekel Peled
2018-10-29 10:03 ` Shahaf Shuler
2018-10-29 16:44 ` Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 3/6] net/mlx5: add VXLAN decap " Dekel Peled
2018-10-29 10:03 ` Shahaf Shuler
2018-10-29 16:46 ` Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 4/6] net/mlx5: add NVGRE encap " Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 5/6] net/mlx5: add NVGRE decap " Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 6/6] net/mlx5: add raw data encap decap " Dekel Peled
2018-10-29 10:03 ` Shahaf Shuler
2018-10-29 16:54 ` Dekel Peled
2018-10-11 12:12 ` [dpdk-dev] [PATCH v5 1/4] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-11 17:05 ` Yongseok Koh
2018-10-11 12:12 ` [dpdk-dev] [PATCH v5 2/4] net/mlx5: add Direct Verbs encap and decap defs Dekel Peled
2018-10-11 12:12 ` [dpdk-dev] [PATCH v5 3/4] net/mlx5: add L2 and L3 encap to Direct Verbs flow Dekel Peled
2018-10-11 12:12 ` [dpdk-dev] [PATCH v5 4/4] net/mlx5: add L2 and L3 decap " Dekel Peled
2018-10-10 8:35 ` [dpdk-dev] [PATCH v4 1/4] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-10 21:22 ` Yongseok Koh
2018-10-10 8:35 ` [dpdk-dev] [PATCH v4 2/4] net/mlx5: add Direct Verbs encap and decap defs Dekel Peled
2018-10-10 8:35 ` [dpdk-dev] [PATCH v4 3/4] net/mlx5: add L2 and L3 encap to Direct Verbs flow Dekel Peled
2018-10-10 8:35 ` [dpdk-dev] [PATCH v4 4/4] net/mlx5: add L2 and L3 decap " Dekel Peled
2018-10-09 19:25 ` [dpdk-dev] [PATCH v3 1/4] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-10 0:36 ` Yongseok Koh
2018-10-10 7:41 ` Dekel Peled
2018-10-10 0:38 ` Yongseok Koh
2018-10-09 19:25 ` [dpdk-dev] [PATCH v3 2/4] net/mlx5: add Direct Verbs encap and decap defs Dekel Peled
2018-10-10 0:40 ` Yongseok Koh
2018-10-09 19:25 ` [dpdk-dev] [PATCH v3 3/4] net/mlx5: add L2 and L3 encap to Direct Verbs flow Dekel Peled
2018-10-10 0:43 ` Yongseok Koh
2018-10-09 19:25 ` [dpdk-dev] [PATCH v3 4/4] net/mlx5: add L2 and L3 decap " Dekel Peled
2018-10-10 0:45 ` Yongseok Koh
2018-10-07 14:25 ` [dpdk-dev] [PATCH v2 1/4] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-08 19:43 ` Yongseok Koh
2018-10-09 18:49 ` Dekel Peled
2018-10-07 14:25 ` [dpdk-dev] [PATCH v2 2/4] net/mlx5: add Direct Verbs encap and decap defs Dekel Peled
2018-10-08 20:46 ` Yongseok Koh
2018-10-07 14:25 ` [dpdk-dev] [PATCH v2 3/4] net/mlx5: add L2 and L3 encap to Direct Verbs flow Dekel Peled
2018-10-08 21:04 ` Yongseok Koh
2018-10-09 15:55 ` Dekel Peled
2018-10-07 14:25 ` [dpdk-dev] [PATCH v2 4/4] net/mlx5: add L2 and L3 decap " Dekel Peled
2018-10-08 21:19 ` Yongseok Koh
2018-10-09 16:56 ` Dekel Peled
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1541065053-28436-3-git-send-email-dekelp@mellanox.com \
--to=dekelp@mellanox.com \
--cc=dev@dpdk.org \
--cc=orika@mellanox.com \
--cc=shahafs@mellanox.com \
--cc=yskoh@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).