From: Jeff Guo <jia.guo@intel.com>
To: bernard.iremonger@intel.com, wenzhuo.lu@intel.com,
shahafs@mellanox.com, thomas@monjalon.net, matan@mellanox.com
Cc: ferruh.yigit@intel.com, konstantin.ananyev@intel.com,
dev@dpdk.org, jia.guo@intel.com, stephen@networkplumber.org,
gaetan.rivet@6wind.com, qi.z.zhang@intel.com,
arybchenko@solarflare.com, bruce.richardson@intel.com,
shaopeng.he@intel.com, anatoly.burakov@intel.com
Subject: [dpdk-dev] [PATCH 2/3] ethdev: remove ethdev rmv interrupt
Date: Fri, 14 Dec 2018 15:45:39 +0800 [thread overview]
Message-ID: <1544773540-89825-3-git-send-email-jia.guo@intel.com> (raw)
In-Reply-To: <1544773540-89825-1-git-send-email-jia.guo@intel.com>
Since eal device event had been introduced, and application could monitor
eal device event and accordingly handle hot-unplug for device, so the
ethdev rmv event could be replaced by eal device event. This patch aim to
abandon ethdev rmv interrupt, its every usages in pmd and testpmd will be
removed, while use a common way to detect device hotplug.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
---
app/test-pmd/parameters.c | 2 --
app/test-pmd/testpmd.c | 40 +++------------------------------
drivers/net/failsafe/failsafe_ether.c | 12 +++++-----
drivers/net/failsafe/failsafe_ops.c | 3 +--
drivers/net/failsafe/failsafe_private.h | 6 ++---
drivers/net/mlx4/mlx4_intr.c | 1 -
drivers/net/mlx5/mlx5_ethdev.c | 7 +++---
lib/librte_ethdev/rte_ethdev.h | 1 -
8 files changed, 16 insertions(+), 56 deletions(-)
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 38b4197..7819b30 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -529,8 +529,6 @@ parse_event_printing_config(const char *optarg, int enable)
mask = UINT32_C(1) << RTE_ETH_EVENT_IPSEC;
else if (!strcmp(optarg, "macsec"))
mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC;
- else if (!strcmp(optarg, "intr_rmv"))
- mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV;
else if (!strcmp(optarg, "dev_probed"))
mask = UINT32_C(1) << RTE_ETH_EVENT_NEW;
else if (!strcmp(optarg, "dev_released"))
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 4c75587..bd44b21 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -357,7 +357,6 @@ static const char * const eth_event_desc[] = {
[RTE_ETH_EVENT_VF_MBOX] = "VF mbox",
[RTE_ETH_EVENT_IPSEC] = "IPsec",
[RTE_ETH_EVENT_MACSEC] = "MACsec",
- [RTE_ETH_EVENT_INTR_RMV] = "device removal",
[RTE_ETH_EVENT_NEW] = "device probed",
[RTE_ETH_EVENT_DESTROY] = "device released",
[RTE_ETH_EVENT_MAX] = NULL,
@@ -372,8 +371,8 @@ uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) |
(UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE) |
(UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
(UINT32_C(1) << RTE_ETH_EVENT_IPSEC) |
- (UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
- (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV);
+ (UINT32_C(1) << RTE_ETH_EVENT_MACSEC);
+
/*
* Decide if all memory are locked for performance.
*/
@@ -2567,13 +2566,6 @@ eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
ports[port_id].need_setup = 1;
ports[port_id].port_status = RTE_PORT_HANDLING;
break;
- case RTE_ETH_EVENT_INTR_RMV:
- if (port_id_is_invalid(port_id, DISABLED_WARN))
- break;
- if (rte_eal_alarm_set(100000,
- rmv_port_callback, (void *)(intptr_t)port_id))
- fprintf(stderr, "Could not set up deferred device removal\n");
- break;
default:
break;
}
@@ -2626,19 +2618,7 @@ dev_event_callback(const char *device_name, enum rte_dev_event_type type,
device_name);
return;
}
- /*
- * Because the user's callback is invoked in eal interrupt
- * callback, the interrupt callback need to be finished before
- * it can be unregistered when detaching device. So finish
- * callback soon and use a deferred removal to detach device
- * is need. It is a workaround, once the device detaching be
- * moved into the eal in the future, the deferred removal could
- * be deleted.
- */
- if (rte_eal_alarm_set(100000,
- rmv_port_callback, (void *)(intptr_t)port_id))
- RTE_LOG(ERR, EAL,
- "Could not set up deferred device removal\n");
+ rmv_port_callback((void *)(intptr_t)port_id);
break;
case RTE_DEV_EVENT_ADD:
RTE_LOG(ERR, EAL, "The device: %s has been added!\n",
@@ -3170,20 +3150,6 @@ main(int argc, char** argv)
init_config();
if (hot_plug) {
- ret = rte_dev_hotplug_handle_enable();
- if (ret) {
- RTE_LOG(ERR, EAL,
- "fail to enable hotplug handling.");
- return -1;
- }
-
- ret = rte_dev_event_monitor_start();
- if (ret) {
- RTE_LOG(ERR, EAL,
- "fail to start device event monitoring.");
- return -1;
- }
-
ret = rte_dev_event_callback_register(NULL,
dev_event_callback, NULL);
if (ret) {
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 1783165..e3ddbfa 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -345,8 +345,7 @@ failsafe_eth_dev_unregister_callbacks(struct sub_device *sdev)
if (sdev == NULL)
return;
if (sdev->rmv_callback) {
- ret = rte_eth_dev_callback_unregister(PORT_ID(sdev),
- RTE_ETH_EVENT_INTR_RMV,
+ ret = rte_dev_event_callback_unregister(sdev->dev->name,
failsafe_eth_rmv_event_callback,
sdev);
if (ret)
@@ -559,10 +558,10 @@ failsafe_stats_increment(struct rte_eth_stats *to, struct rte_eth_stats *from)
}
}
-int
-failsafe_eth_rmv_event_callback(uint16_t port_id __rte_unused,
- enum rte_eth_event_type event __rte_unused,
- void *cb_arg, void *out __rte_unused)
+void
+failsafe_eth_rmv_event_callback(const char *device_name __rte_unused,
+ enum rte_dev_event_type event __rte_unused,
+ void *cb_arg)
{
struct sub_device *sdev = cb_arg;
@@ -577,7 +576,6 @@ failsafe_eth_rmv_event_callback(uint16_t port_id __rte_unused,
*/
sdev->remove = 1;
fs_unlock(sdev->fs_dev, 0);
- return 0;
}
int
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 7f8bcd4..7868f42 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -140,8 +140,7 @@ fs_dev_configure(struct rte_eth_dev *dev)
return ret;
}
if (rmv_interrupt && sdev->rmv_callback == 0) {
- ret = rte_eth_dev_callback_register(PORT_ID(sdev),
- RTE_ETH_EVENT_INTR_RMV,
+ ret = rte_dev_event_callback_register(sdev->dev->name,
failsafe_eth_rmv_event_callback,
sdev);
if (ret)
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 7e31896..163bb98 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -224,9 +224,9 @@ void failsafe_eth_dev_unregister_callbacks(struct sub_device *sdev);
void failsafe_dev_remove(struct rte_eth_dev *dev);
void failsafe_stats_increment(struct rte_eth_stats *to,
struct rte_eth_stats *from);
-int failsafe_eth_rmv_event_callback(uint16_t port_id,
- enum rte_eth_event_type type,
- void *arg, void *out);
+void failsafe_eth_rmv_event_callback(const char *device_name,
+ enum rte_dev_event_type event,
+ void *cb_arg);
int failsafe_eth_lsc_event_callback(uint16_t port_id,
enum rte_eth_event_type event,
void *cb_arg, void *out);
diff --git a/drivers/net/mlx4/mlx4_intr.c b/drivers/net/mlx4/mlx4_intr.c
index eeb982a..401cc84 100644
--- a/drivers/net/mlx4/mlx4_intr.c
+++ b/drivers/net/mlx4/mlx4_intr.c
@@ -180,7 +180,6 @@ mlx4_interrupt_handler(struct priv *priv)
enum { LSC, RMV, };
static const enum rte_eth_event_type type[] = {
[LSC] = RTE_ETH_EVENT_INTR_LSC,
- [RMV] = RTE_ETH_EVENT_INTR_RMV,
};
uint32_t caught[RTE_DIM(type)] = { 0 };
struct ibv_async_event event;
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index d178ed6..7d1194f 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -1033,7 +1033,7 @@ mlx5_dev_status_handler(struct rte_eth_dev *dev)
ret |= (1 << RTE_ETH_EVENT_INTR_LSC);
else if (event.event_type == IBV_EVENT_DEVICE_FATAL &&
dev->data->dev_conf.intr_conf.rmv == 1)
- ret |= (1 << RTE_ETH_EVENT_INTR_RMV);
+ ret |= (1 << RTE_DEV_EVENT_REMOVE);
else
DRV_LOG(DEBUG,
"port %u event type %d on not handled",
@@ -1060,8 +1060,9 @@ mlx5_dev_interrupt_handler(void *cb_arg)
events = mlx5_dev_status_handler(dev);
if (events & (1 << RTE_ETH_EVENT_INTR_LSC))
_rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
- if (events & (1 << RTE_ETH_EVENT_INTR_RMV))
- _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_RMV, NULL);
+ if (events & (1 << RTE_DEV_EVENT_REMOVE))
+ rte_dev_event_callback_process(dev->device->name,
+ RTE_DEV_EVENT_REMOVE);
}
/**
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index 1960f3a..6d54743 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -2619,7 +2619,6 @@ enum rte_eth_event_type {
/**< reset interrupt event, sent to VF on PF reset */
RTE_ETH_EVENT_VF_MBOX, /**< message from the VF received by PF */
RTE_ETH_EVENT_MACSEC, /**< MACsec offload related event */
- RTE_ETH_EVENT_INTR_RMV, /**< device removal event */
RTE_ETH_EVENT_NEW, /**< port is probed */
RTE_ETH_EVENT_DESTROY, /**< port is released */
RTE_ETH_EVENT_IPSEC, /**< IPsec offload related event */
--
2.7.4
next prev parent reply other threads:[~2018-12-14 7:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-14 7:45 [dpdk-dev] [PATCH 0/3] use a common eal device event for hot-unplug Jeff Guo
2018-12-14 7:45 ` [dpdk-dev] [PATCH 1/3] eal: add --dev-hotplug option Jeff Guo
2018-12-17 10:15 ` David Marchand
2018-12-29 4:06 ` Jeff Guo
2019-01-02 14:46 ` David Marchand
2018-12-14 7:45 ` Jeff Guo [this message]
2018-12-14 7:45 ` [dpdk-dev] [PATCH 3/3] testpmd: remove device detach into eal Jeff Guo
2019-04-08 14:10 ` [dpdk-dev] [PATCH 0/3] use a common eal device event for hot-unplug Iremonger, Bernard
2019-04-08 14:10 ` Iremonger, Bernard
2023-06-09 17:18 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1544773540-89825-3-git-send-email-jia.guo@intel.com \
--to=jia.guo@intel.com \
--cc=anatoly.burakov@intel.com \
--cc=arybchenko@solarflare.com \
--cc=bernard.iremonger@intel.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=gaetan.rivet@6wind.com \
--cc=konstantin.ananyev@intel.com \
--cc=matan@mellanox.com \
--cc=qi.z.zhang@intel.com \
--cc=shahafs@mellanox.com \
--cc=shaopeng.he@intel.com \
--cc=stephen@networkplumber.org \
--cc=thomas@monjalon.net \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).