DPDK patches and discussions
 help / color / mirror / Atom feed
From: Lee Daly <lee.daly@intel.com>
To: akhil.goyal@nxp.com
Cc: dev@dpdk.org, Lee Daly <lee.daly@intel.com>
Subject: [dpdk-dev] [PATCH v4 1/3] compress/isal: enable checksum support in driver
Date: Fri, 14 Dec 2018 09:59:22 +0000	[thread overview]
Message-ID: <1544781564-63598-1-git-send-email-lee.daly@intel.com> (raw)
In-Reply-To: <11544697752-156863-1-git-send-email-lee.daly@intel.com>

This patch adds checksum support in the ISA-L  PMD for both compression
and decompression.
CRC32 is supported as well as Adler32.

V2:
Documentation Changes
V3:
Added Release note
V4:
Removed dependency on offset unit test

Signed-off-by: Lee Daly <lee.daly@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
---
 drivers/compress/isal/isal_compress_pmd.c     | 80 ++++++++++++++++++++++-----
 drivers/compress/isal/isal_compress_pmd_ops.c |  4 +-
 2 files changed, 69 insertions(+), 15 deletions(-)

diff --git a/drivers/compress/isal/isal_compress_pmd.c b/drivers/compress/isal/isal_compress_pmd.c
index 9f1e968..b087ed8 100644
--- a/drivers/compress/isal/isal_compress_pmd.c
+++ b/drivers/compress/isal/isal_compress_pmd.c
@@ -16,6 +16,8 @@
 #define RTE_COMP_ISAL_LEVEL_ONE 1
 #define RTE_COMP_ISAL_LEVEL_TWO 2
 #define RTE_COMP_ISAL_LEVEL_THREE 3 /* Optimised for AVX512 & AVX2 only */
+#define CHKSUM_SZ_CRC 8
+#define CHKSUM_SZ_ADLER 4
 
 int isal_logtype_driver;
 
@@ -43,12 +45,6 @@ isal_comp_set_priv_xform_parameters(struct isal_priv_xform *priv_xform,
 		}
 		priv_xform->compress.algo = RTE_COMP_ALGO_DEFLATE;
 
-		/* Set private xform checksum - raw deflate by default */
-		if (xform->compress.chksum != RTE_COMP_CHECKSUM_NONE) {
-			ISAL_PMD_LOG(ERR, "Checksum not supported\n");
-			return -ENOTSUP;
-		}
-
 		/* Set private xform window size, 32K supported */
 		if (xform->compress.window_size == RTE_COMP_ISAL_WINDOW_SIZE)
 			priv_xform->compress.window_size =
@@ -77,6 +73,27 @@ isal_comp_set_priv_xform_parameters(struct isal_priv_xform *priv_xform,
 			return -ENOTSUP;
 		}
 
+		/* Set private xform checksum */
+		switch (xform->compress.chksum) {
+		/* Raw deflate by default */
+		case(RTE_COMP_CHECKSUM_NONE):
+			priv_xform->compress.chksum = IGZIP_DEFLATE;
+			break;
+		case(RTE_COMP_CHECKSUM_CRC32):
+			priv_xform->compress.chksum = IGZIP_GZIP_NO_HDR;
+			break;
+		case(RTE_COMP_CHECKSUM_ADLER32):
+			priv_xform->compress.chksum = IGZIP_ZLIB_NO_HDR;
+			break;
+		case(RTE_COMP_CHECKSUM_CRC32_ADLER32):
+			ISAL_PMD_LOG(ERR, "Combined CRC and ADLER checksum not"
+					" supported\n");
+			return -ENOTSUP;
+		default:
+			ISAL_PMD_LOG(ERR, "Checksum type not supported\n");
+			return -ENOTSUP;
+		}
+
 		/* Set private xform level.
 		 * Checking compliance with compressdev API, -1 <= level => 9
 		 */
@@ -170,9 +187,24 @@ isal_comp_set_priv_xform_parameters(struct isal_priv_xform *priv_xform,
 		}
 		priv_xform->decompress.algo = RTE_COMP_ALGO_DEFLATE;
 
-		/* Set private xform checksum - raw deflate by default */
-		if (xform->compress.chksum != RTE_COMP_CHECKSUM_NONE) {
-			ISAL_PMD_LOG(ERR, "Checksum not supported\n");
+		/* Set private xform checksum */
+		switch (xform->decompress.chksum) {
+		/* Raw deflate by default */
+		case(RTE_COMP_CHECKSUM_NONE):
+			priv_xform->decompress.chksum = ISAL_DEFLATE;
+			break;
+		case(RTE_COMP_CHECKSUM_CRC32):
+			priv_xform->decompress.chksum = ISAL_GZIP_NO_HDR_VER;
+			break;
+		case(RTE_COMP_CHECKSUM_ADLER32):
+			priv_xform->decompress.chksum = ISAL_ZLIB_NO_HDR_VER;
+			break;
+		case(RTE_COMP_CHECKSUM_CRC32_ADLER32):
+			ISAL_PMD_LOG(ERR, "Combined CRC and ADLER checksum not"
+					" supported\n");
+			return -ENOTSUP;
+		default:
+			ISAL_PMD_LOG(ERR, "Checksum type not supported\n");
 			return -ENOTSUP;
 		}
 
@@ -376,6 +408,9 @@ process_isal_deflate(struct rte_comp_op *op, struct isal_comp_qp *qp,
 
 	qp->stream->level_buf = temp_level_buf;
 
+	/* Set Checksum flag */
+	qp->stream->gzip_flag = priv_xform->compress.chksum;
+
 	/* Stateless operation, input will be consumed in one go */
 	qp->stream->flush = NO_FLUSH;
 
@@ -459,8 +494,18 @@ process_isal_deflate(struct rte_comp_op *op, struct isal_comp_qp *qp,
 			return ret;
 		}
 	}
+
 	op->consumed = qp->stream->total_in;
-	op->produced = qp->stream->total_out;
+	if (qp->stream->gzip_flag == IGZIP_DEFLATE) {
+		op->produced = qp->stream->total_out;
+	} else if (qp->stream->gzip_flag == IGZIP_ZLIB_NO_HDR) {
+		op->produced = qp->stream->total_out - CHKSUM_SZ_ADLER;
+		op->output_chksum = qp->stream->internal_state.crc + 1;
+	} else {
+		op->produced = qp->stream->total_out - CHKSUM_SZ_CRC;
+		op->output_chksum = qp->stream->internal_state.crc;
+	}
+
 	isal_deflate_reset(qp->stream);
 
 	return ret;
@@ -468,7 +513,8 @@ process_isal_deflate(struct rte_comp_op *op, struct isal_comp_qp *qp,
 
 /* Stateless Decompression Function */
 static int
-process_isal_inflate(struct rte_comp_op *op, struct isal_comp_qp *qp)
+process_isal_inflate(struct rte_comp_op *op, struct isal_comp_qp *qp,
+		struct isal_priv_xform *priv_xform)
 {
 	int ret = 0;
 
@@ -477,6 +523,9 @@ process_isal_inflate(struct rte_comp_op *op, struct isal_comp_qp *qp)
 	/* Initialize decompression state */
 	isal_inflate_init(qp->state);
 
+	/* Set Checksum flag */
+	qp->state->crc_flag = priv_xform->decompress.chksum;
+
 	if (op->m_src->pkt_len < (op->src.length + op->src.offset)) {
 		ISAL_PMD_LOG(ERR, "Input mbuf(s) not big enough.\n");
 		op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
@@ -531,13 +580,16 @@ process_isal_inflate(struct rte_comp_op *op, struct isal_comp_qp *qp)
 			return -1;
 		}
 
-		if (ret != ISAL_DECOMP_OK) {
+		if (ret != ISAL_DECOMP_OK && ret != ISAL_END_INPUT) {
+			ISAL_PMD_LOG(ERR, "Decompression operation failed\n");
 			op->status = RTE_COMP_OP_STATUS_ERROR;
 			return ret;
 		}
 		op->consumed = op->src.length - qp->state->avail_in;
 	}
-		op->produced = qp->state->total_out;
+	op->produced = qp->state->total_out;
+	op->output_chksum = qp->state->crc;
+
 	isal_inflate_reset(qp->state);
 
 	return ret;
@@ -553,7 +605,7 @@ process_op(struct isal_comp_qp *qp, struct rte_comp_op *op,
 		process_isal_deflate(op, qp, priv_xform);
 		break;
 	case RTE_COMP_DECOMPRESS:
-		process_isal_inflate(op, qp);
+		process_isal_inflate(op, qp, priv_xform);
 		break;
 	default:
 		ISAL_PMD_LOG(ERR, "Operation Not Supported\n");
diff --git a/drivers/compress/isal/isal_compress_pmd_ops.c b/drivers/compress/isal/isal_compress_pmd_ops.c
index 41cade8..7b91849 100644
--- a/drivers/compress/isal/isal_compress_pmd_ops.c
+++ b/drivers/compress/isal/isal_compress_pmd_ops.c
@@ -17,7 +17,9 @@ static const struct rte_compressdev_capabilities isal_pmd_capabilities[] = {
 					RTE_COMP_FF_OOP_LB_IN_SGL_OUT |
 					RTE_COMP_FF_SHAREABLE_PRIV_XFORM |
 					RTE_COMP_FF_HUFFMAN_FIXED |
-					RTE_COMP_FF_HUFFMAN_DYNAMIC,
+					RTE_COMP_FF_HUFFMAN_DYNAMIC |
+					RTE_COMP_FF_CRC32_CHECKSUM |
+					RTE_COMP_FF_ADLER32_CHECKSUM,
 		.window_size = {
 			.min = 15,
 			.max = 15,
-- 
2.7.4

       reply	other threads:[~2018-12-14  9:59 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <11544697752-156863-1-git-send-email-lee.daly@intel.com>
2018-12-14  9:59 ` Lee Daly [this message]
2018-12-14  9:59   ` [dpdk-dev] [PATCH v4 2/3] test/compress: add checksum tests Lee Daly
2018-12-14  9:59   ` [dpdk-dev] [PATCH v4 3/3] doc: update ISA-L guide to reflect checksum support Lee Daly
2018-12-17  8:19   ` [dpdk-dev] [PATCH v4 1/3] compress/isal: enable checksum support in driver Varghese, Vipin
2018-12-17  9:20     ` Daly, Lee
2018-12-17 12:33       ` Varghese, Vipin
2018-12-19 15:48   ` [dpdk-dev] [PATCH v5 " Lee Daly
2018-12-19 15:48     ` [dpdk-dev] [PATCH v5 2/3] test/compress: add checksum tests Lee Daly
2018-12-19 15:48     ` [dpdk-dev] [PATCH v5 3/3] doc: update ISA-L guide to reflect checksum support Lee Daly
2019-01-08 10:29     ` [dpdk-dev] [PATCH v6 1/2] test/compress: add checksum tests Lee Daly
2019-01-08 10:29       ` [dpdk-dev] [PATCH v6 2/2] compress/isal: enable checksum support in driver Lee Daly
2019-01-08 14:58       ` [dpdk-dev] [PATCH v6 1/2] test/compress: add checksum tests De Lara Guarch, Pablo
2019-01-08 16:20       ` [dpdk-dev] [PATCH v7 " Lee Daly
2019-01-08 16:20         ` [dpdk-dev] [PATCH v7 2/2] compress/isal: enable checksum support in driver Lee Daly
2019-01-08 17:19         ` [dpdk-dev] [PATCH v7 1/2] test/compress: add checksum tests De Lara Guarch, Pablo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1544781564-63598-1-git-send-email-lee.daly@intel.com \
    --to=lee.daly@intel.com \
    --cc=akhil.goyal@nxp.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).