From: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
To: dev@dpdk.org
Cc: yskoh@mellanox.com, shahafs@mellanox.com, stephen@networkplumber.org
Subject: [dpdk-dev] [PATCH v2 2/2] Revert "net/mlx5: fix master device Netlink socket sharing"
Date: Sun, 21 Jul 2019 14:56:41 +0000 [thread overview]
Message-ID: <1563721001-3730-3-git-send-email-viacheslavo@mellanox.com> (raw)
In-Reply-To: <1563721001-3730-1-git-send-email-viacheslavo@mellanox.com>
This reverts commit e28111ac9864af09e826241a915dfff87a9c00ad.
The netlink requests are replaced by ifindex caching and
not needed anymore.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Fixes: e28111ac9864 ("net/mlx5: fix master device Netlink socket sharing")
---
drivers/net/mlx5/mlx5.h | 6 ---
drivers/net/mlx5/mlx5_ethdev.c | 109 ++---------------------------------------
2 files changed, 3 insertions(+), 112 deletions(-)
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 1011dcc..3e75961 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -518,15 +518,9 @@ struct mlx5_priv {
/* mlx5_ethdev.c */
int mlx5_get_ifname(const struct rte_eth_dev *dev, char (*ifname)[IF_NAMESIZE]);
-int mlx5_get_ifname_base(const struct rte_eth_dev *base,
- const struct rte_eth_dev *dev,
- char (*ifname)[IF_NAMESIZE]);
int mlx5_get_master_ifname(const char *ibdev_path, char (*ifname)[IF_NAMESIZE]);
unsigned int mlx5_ifindex(const struct rte_eth_dev *dev);
int mlx5_ifreq(const struct rte_eth_dev *dev, int req, struct ifreq *ifr);
-int mlx5_ifreq_base(const struct rte_eth_dev *base,
- const struct rte_eth_dev *dev,
- int req, struct ifreq *ifr);
int mlx5_get_mtu(struct rte_eth_dev *dev, uint16_t *mtu);
int mlx5_set_flags(struct rte_eth_dev *dev, unsigned int keep,
unsigned int flags);
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index dfd9e97..9629cfb 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -240,51 +240,6 @@ struct ethtool_link_settings {
}
/**
- * Get interface name for the specified device, uses the extra base
- * device resources to perform Netlink requests.
- *
- * This is a port representor-aware version of mlx5_get_master_ifname().
- *
- * @param[in] base
- * Pointer to Ethernet device to use Netlink socket from
- * to perfrom requests.
- * @param[in] dev
- * Pointer to Ethernet device.
- * @param[out] ifname
- * Interface name output buffer.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-int
-mlx5_get_ifname_base(const struct rte_eth_dev *base,
- const struct rte_eth_dev *dev,
- char (*ifname)[IF_NAMESIZE])
-{
- struct mlx5_priv *priv = dev->data->dev_private;
- struct mlx5_priv *priv_base = base->data->dev_private;
- unsigned int ifindex;
-
- assert(priv);
- assert(priv->sh);
- assert(priv_base);
- ifindex = priv_base->nl_socket_rdma >= 0 ?
- mlx5_nl_ifindex(priv_base->nl_socket_rdma,
- priv->sh->ibdev_name,
- priv->ibv_port) : 0;
- if (!ifindex) {
- if (!priv->representor)
- return mlx5_get_master_ifname(priv->sh->ibdev_path,
- ifname);
- rte_errno = ENXIO;
- return -rte_errno;
- }
- if (if_indextoname(ifindex, &(*ifname)[0]))
- return 0;
- rte_errno = errno;
- return -rte_errno;
-}
-/**
* Get the interface index from device name.
*
* @param[in] dev
@@ -346,51 +301,6 @@ struct ethtool_link_settings {
}
/**
- * Perform ifreq ioctl() on specified Ethernet device,
- * ifindex, name and other attributes are requested
- * on the base device to avoid specified device Netlink
- * socket sharing (this is not thread-safe).
- *
- * @param[in] base
- * Pointer to Ethernet device to get dev attributes.
- * @param[in] dev
- * Pointer to Ethernet device to perform ioctl.
- * @param req
- * Request number to pass to ioctl().
- * @param[out] ifr
- * Interface request structure output buffer.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-int
-mlx5_ifreq_base(const struct rte_eth_dev *base,
- const struct rte_eth_dev *dev,
- int req, struct ifreq *ifr)
-{
- int sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
- int ret = 0;
-
- if (sock == -1) {
- rte_errno = errno;
- return -rte_errno;
- }
- ret = mlx5_get_ifname_base(base, dev, &ifr->ifr_name);
- if (ret)
- goto error;
- ret = ioctl(sock, req, ifr);
- if (ret == -1) {
- rte_errno = errno;
- goto error;
- }
- close(sock);
- return 0;
-error:
- close(sock);
- return -rte_errno;
-}
-
-/**
* Get device MTU.
*
* @param dev
@@ -872,15 +782,7 @@ int mlx5_fw_version_get(struct rte_eth_dev *dev, char *fw_ver, size_t fw_size)
ifr = (struct ifreq) {
.ifr_data = (void *)&edata,
};
- /*
- * Use special version of mlx5_ifreq()
- * to get master device name with local
- * device Netlink socket. Using master
- * device Netlink socket is not thread
- * safe.
- */
- ret = mlx5_ifreq_base(dev, master,
- SIOCETHTOOL, &ifr);
+ ret = mlx5_ifreq(master, SIOCETHTOOL, &ifr);
}
}
if (ret) {
@@ -977,12 +879,7 @@ int mlx5_fw_version_get(struct rte_eth_dev *dev, char *fw_ver, size_t fw_size)
ifr = (struct ifreq) {
.ifr_data = (void *)&gcmd,
};
- /*
- * Avoid using master Netlink socket.
- * This is not thread-safe.
- */
- ret = mlx5_ifreq_base(dev, master,
- SIOCETHTOOL, &ifr);
+ ret = mlx5_ifreq(master, SIOCETHTOOL, &ifr);
}
}
if (ret) {
@@ -1003,7 +900,7 @@ int mlx5_fw_version_get(struct rte_eth_dev *dev, char *fw_ver, size_t fw_size)
*ecmd = gcmd;
ifr.ifr_data = (void *)ecmd;
- ret = mlx5_ifreq_base(dev, master ? master : dev, SIOCETHTOOL, &ifr);
+ ret = mlx5_ifreq(master ? master : dev, SIOCETHTOOL, &ifr);
if (ret) {
DRV_LOG(DEBUG,
"port %u ioctl(SIOCETHTOOL,"
--
1.8.3.1
next prev parent reply other threads:[~2019-07-21 14:57 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-12 20:54 [dpdk-dev] [PATCH 0/2] fix dev_info_get in mlx secondary process Stephen Hemminger
2019-07-12 20:54 ` [dpdk-dev] [PATCH 1/2] net/mlx4: fix crash in dev_info_get in " Stephen Hemminger
2019-07-30 13:48 ` Matan Azrad
2019-08-04 6:57 ` Raslan Darawsheh
2019-08-05 7:42 ` Raslan Darawsheh
2019-07-12 20:54 ` [dpdk-dev] [PATCH 2/2] net/mlx5: " Stephen Hemminger
2019-07-15 7:41 ` Slava Ovsiienko
2019-07-19 5:31 ` [dpdk-dev] [PATCH 0/2] net/mlx5: cache the associated network device ifindex Viacheslav Ovsiienko
2019-07-19 5:31 ` [dpdk-dev] [PATCH 1/2] " Viacheslav Ovsiienko
2019-07-19 16:15 ` Stephen Hemminger
2019-07-19 16:41 ` Slava Ovsiienko
2019-07-19 18:03 ` Stephen Hemminger
2019-07-19 18:31 ` Slava Ovsiienko
2019-07-19 5:31 ` [dpdk-dev] [PATCH 2/2] Revert "net/mlx5: fix master device Netlink socket sharing" Viacheslav Ovsiienko
2019-07-19 16:16 ` Stephen Hemminger
2019-07-19 16:21 ` Slava Ovsiienko
2019-07-19 16:23 ` Stephen Hemminger
2019-07-21 14:56 ` [dpdk-dev] [PATCH v2 0/2] net/mlx5: cache the associated network device ifindex Viacheslav Ovsiienko
2019-07-21 14:56 ` [dpdk-dev] [PATCH v2 1/2] " Viacheslav Ovsiienko
2019-07-22 5:52 ` Yongseok Koh
2019-07-21 14:56 ` Viacheslav Ovsiienko [this message]
2019-07-22 5:53 ` [dpdk-dev] [PATCH v2 2/2] Revert "net/mlx5: fix master device Netlink socket sharing" Yongseok Koh
2019-07-22 8:43 ` [dpdk-dev] [PATCH v2 0/2] net/mlx5: cache the associated network device ifindex Raslan Darawsheh
2019-07-31 7:36 ` [dpdk-dev] [PATCH 2/2] net/mlx5: fix crash in dev_info_get in secondary process Raslan Darawsheh
2019-07-31 13:47 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1563721001-3730-3-git-send-email-viacheslavo@mellanox.com \
--to=viacheslavo@mellanox.com \
--cc=dev@dpdk.org \
--cc=shahafs@mellanox.com \
--cc=stephen@networkplumber.org \
--cc=yskoh@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).