DPDK patches and discussions
 help / color / mirror / Atom feed
From: Phil Yang <phil.yang@arm.com>
To: dev@dpdk.org
Cc: thomas@monjalon.net, jerinj@marvell.com, gage.eads@intel.com,
	hemant.agrawal@nxp.com, Honnappa.Nagarahalli@arm.com,
	gavin.hu@arm.com, nd@arm.com
Subject: [dpdk-dev] [PATCH v7 1/3] eal/arm64: add 128-bit atomic compare exchange
Date: Tue, 23 Jul 2019 13:57:21 +0800	[thread overview]
Message-ID: <1563861443-14491-1-git-send-email-phil.yang@arm.com> (raw)
In-Reply-To: <1561257671-10316-1-git-send-email-phil.yang@arm.com>

Add 128-bit atomic compare exchange on aarch64.

Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Tested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

---
v7:
1. Adjust code comment.

v6:
1. Put the RTE_ARM_FEATURE_ATOMICS flag into EAL group. (Jerin Jocob)
2. Keep rte_stack_lf_stubs.h doing nothing. (Gage Eads)
3. Fixed 32 bit build issue.

v5:
1. Enable RTE_ARM_FEATURE_ATOMICS on octeontx2 in default. (Jerin Jocob)
2. Record the reason of introducing "rte_stack_lf_stubs.h" in git commit.
(Jerin, Jocob)
3. Fixed a conditional MACRO error in rte_atomic128_cmp_exchange. (Jerin
Jocob)

v4:
1. Add RTE_ARM_FEATURE_ATOMICS flag to support LSE CASP instructions. (Jerin Jocob)
2. Fix possible arm64 ABI break by making casp_op_name noinline. (Jerin Jocob)
3. Add rte_stack_lf_stubs.h to reduce the ifdef clutter. (Gage Eads/Jerin Jocob)

v3:
1. Avoid duplication code with macro. (Jerin Jocob)
2. Make invalid memory order to strongest barrier. (Jerin Jocob)
3. Update doc/guides/prog_guide/env_abstraction_layer.rst. (Gage Eads)
4. Fix 32-bit x86 builds issue. (Gage Eads)
5. Correct documentation issues in UT. (Gage Eads)

v2:
Initial version.

 config/arm/meson.build                             |   2 +
 config/common_base                                 |   3 +
 config/defconfig_arm64-octeontx2-linuxapp-gcc      |   1 +
 config/defconfig_arm64-thunderx2-linuxapp-gcc      |   1 +
 .../common/include/arch/arm/rte_atomic_64.h        | 162 +++++++++++++++++++++
 .../common/include/arch/x86/rte_atomic_64.h        |  12 --
 lib/librte_eal/common/include/generic/rte_atomic.h |  17 ++-
 7 files changed, 185 insertions(+), 13 deletions(-)

diff --git a/config/arm/meson.build b/config/arm/meson.build
index 979018e..9f28271 100644
--- a/config/arm/meson.build
+++ b/config/arm/meson.build
@@ -71,11 +71,13 @@ flags_thunderx2_extra = [
 	['RTE_CACHE_LINE_SIZE', 64],
 	['RTE_MAX_NUMA_NODES', 2],
 	['RTE_MAX_LCORE', 256],
+	['RTE_ARM_FEATURE_ATOMICS', true],
 	['RTE_USE_C11_MEM_MODEL', true]]
 flags_octeontx2_extra = [
 	['RTE_MACHINE', '"octeontx2"'],
 	['RTE_MAX_NUMA_NODES', 1],
 	['RTE_MAX_LCORE', 24],
+	['RTE_ARM_FEATURE_ATOMICS', true],
 	['RTE_EAL_IGB_UIO', false],
 	['RTE_USE_C11_MEM_MODEL', true]]
 
diff --git a/config/common_base b/config/common_base
index 8ef75c2..2054480 100644
--- a/config/common_base
+++ b/config/common_base
@@ -82,6 +82,9 @@ CONFIG_RTE_MAX_LCORE=128
 CONFIG_RTE_MAX_NUMA_NODES=8
 CONFIG_RTE_MAX_HEAPS=32
 CONFIG_RTE_MAX_MEMSEG_LISTS=64
+
+# Use ARM LSE ATOMIC instructions
+CONFIG_RTE_ARM_FEATURE_ATOMICS=n
 # each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
 # or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
 CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
diff --git a/config/defconfig_arm64-octeontx2-linuxapp-gcc b/config/defconfig_arm64-octeontx2-linuxapp-gcc
index f20da24..7687dbe 100644
--- a/config/defconfig_arm64-octeontx2-linuxapp-gcc
+++ b/config/defconfig_arm64-octeontx2-linuxapp-gcc
@@ -9,6 +9,7 @@ CONFIG_RTE_MACHINE="octeontx2"
 CONFIG_RTE_CACHE_LINE_SIZE=128
 CONFIG_RTE_MAX_NUMA_NODES=1
 CONFIG_RTE_MAX_LCORE=24
+CONFIG_RTE_ARM_FEATURE_ATOMICS=y
 
 # Doesn't support NUMA
 CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
diff --git a/config/defconfig_arm64-thunderx2-linuxapp-gcc b/config/defconfig_arm64-thunderx2-linuxapp-gcc
index cc5c64b..af4a89c 100644
--- a/config/defconfig_arm64-thunderx2-linuxapp-gcc
+++ b/config/defconfig_arm64-thunderx2-linuxapp-gcc
@@ -9,3 +9,4 @@ CONFIG_RTE_MACHINE="thunderx2"
 CONFIG_RTE_CACHE_LINE_SIZE=64
 CONFIG_RTE_MAX_NUMA_NODES=2
 CONFIG_RTE_MAX_LCORE=256
+CONFIG_RTE_ARM_FEATURE_ATOMICS=y
diff --git a/lib/librte_eal/common/include/arch/arm/rte_atomic_64.h b/lib/librte_eal/common/include/arch/arm/rte_atomic_64.h
index 97060e4..a040d69 100644
--- a/lib/librte_eal/common/include/arch/arm/rte_atomic_64.h
+++ b/lib/librte_eal/common/include/arch/arm/rte_atomic_64.h
@@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: BSD-3-Clause
  * Copyright(c) 2015 Cavium, Inc
+ * Copyright(c) 2019 Arm Limited
  */
 
 #ifndef _RTE_ATOMIC_ARM64_H_
@@ -14,6 +15,9 @@ extern "C" {
 #endif
 
 #include "generic/rte_atomic.h"
+#include <rte_branch_prediction.h>
+#include <rte_compat.h>
+#include <rte_debug.h>
 
 #define dsb(opt) asm volatile("dsb " #opt : : : "memory")
 #define dmb(opt) asm volatile("dmb " #opt : : : "memory")
@@ -40,6 +44,164 @@ extern "C" {
 
 #define rte_cio_rmb() dmb(oshld)
 
+/*------------------------ 128 bit atomic operations -------------------------*/
+
+#define __HAS_ACQ(mo) ((mo) != __ATOMIC_RELAXED && (mo) != __ATOMIC_RELEASE)
+#define __HAS_RLS(mo) ((mo) == __ATOMIC_RELEASE || (mo) == __ATOMIC_ACQ_REL || \
+					  (mo) == __ATOMIC_SEQ_CST)
+
+#define __MO_LOAD(mo)  (__HAS_ACQ((mo)) ? __ATOMIC_ACQUIRE : __ATOMIC_RELAXED)
+#define __MO_STORE(mo) (__HAS_RLS((mo)) ? __ATOMIC_RELEASE : __ATOMIC_RELAXED)
+
+#if defined(__ARM_FEATURE_ATOMICS) || defined(RTE_ARM_FEATURE_ATOMICS)
+#define __ATOMIC128_CAS_OP(cas_op_name, op_string)                          \
+static __rte_noinline rte_int128_t                                          \
+cas_op_name(rte_int128_t *dst, rte_int128_t old,                            \
+		rte_int128_t updated)                                               \
+{                                                                           \
+	/* caspX instructions register pair must start from even-numbered
+	 * register at operand 1.
+	 * So, specify registers for local variables here.
+	 */                                                                     \
+	register uint64_t x0 __asm("x0") = (uint64_t)old.val[0];                \
+	register uint64_t x1 __asm("x1") = (uint64_t)old.val[1];                \
+	register uint64_t x2 __asm("x2") = (uint64_t)updated.val[0];            \
+	register uint64_t x3 __asm("x3") = (uint64_t)updated.val[1];            \
+	asm volatile(                                                           \
+			op_string " %[old0], %[old1], %[upd0], %[upd1], [%[dst]]"       \
+			: [old0] "+r" (x0),                                             \
+			  [old1] "+r" (x1)                                              \
+			: [upd0] "r" (x2),                                              \
+			  [upd1] "r" (x3),                                              \
+			  [dst] "r" (dst)                                               \
+			: "memory");                                                    \
+	old.val[0] = x0;                                                        \
+	old.val[1] = x1;                                                        \
+	return old;                                                             \
+}
+
+__ATOMIC128_CAS_OP(__rte_cas_relaxed, "casp")
+__ATOMIC128_CAS_OP(__rte_cas_acquire, "caspa")
+__ATOMIC128_CAS_OP(__rte_cas_release, "caspl")
+__ATOMIC128_CAS_OP(__rte_cas_acq_rel, "caspal")
+#else
+#define __ATOMIC128_LDX_OP(ldx_op_name, op_string)                          \
+static inline rte_int128_t                                                  \
+ldx_op_name(const rte_int128_t *src)                                        \
+{                                                                           \
+	rte_int128_t ret;                                                       \
+	asm volatile(                                                           \
+			op_string " %0, %1, %2"                                         \
+			: "=&r" (ret.val[0]),                                           \
+			  "=&r" (ret.val[1])                                            \
+			: "Q" (src->val[0])                                             \
+			: "memory");                                                    \
+	return ret;                                                             \
+}
+
+__ATOMIC128_LDX_OP(__rte_ldx_relaxed, "ldxp")
+__ATOMIC128_LDX_OP(__rte_ldx_acquire, "ldaxp")
+
+#define __ATOMIC128_STX_OP(stx_op_name, op_string)                          \
+static inline uint32_t                                                      \
+stx_op_name(rte_int128_t *dst, const rte_int128_t src)                      \
+{                                                                           \
+	uint32_t ret;                                                           \
+	asm volatile(                                                           \
+			op_string " %w0, %1, %2, %3"                                    \
+			: "=&r" (ret)                                                   \
+			: "r" (src.val[0]),                                             \
+			  "r" (src.val[1]),                                             \
+			  "Q" (dst->val[0])                                             \
+			: "memory");                                                    \
+	/* Return 0 on success, 1 on failure */                                 \
+	return ret;                                                             \
+}
+
+__ATOMIC128_STX_OP(__rte_stx_relaxed, "stxp")
+__ATOMIC128_STX_OP(__rte_stx_release, "stlxp")
+#endif
+
+static inline int __rte_experimental
+rte_atomic128_cmp_exchange(rte_int128_t *dst,
+				rte_int128_t *exp,
+				const rte_int128_t *src,
+				unsigned int weak,
+				int success,
+				int failure)
+{
+	/* Always do strong CAS */
+	RTE_SET_USED(weak);
+	/* Ignore memory ordering for failure, memory order for
+	 * success must be stronger or equal
+	 */
+	RTE_SET_USED(failure);
+	/* Find invalid memory order */
+	RTE_ASSERT(success == __ATOMIC_RELAXED
+			|| success == __ATOMIC_ACQUIRE
+			|| success == __ATOMIC_RELEASE
+			|| success == __ATOMIC_ACQ_REL
+			|| success == __ATOMIC_SEQ_CST);
+
+#if defined(__ARM_FEATURE_ATOMICS) || defined(RTE_ARM_FEATURE_ATOMICS)
+	rte_int128_t expected = *exp;
+	rte_int128_t desired = *src;
+	rte_int128_t old;
+
+	if (success == __ATOMIC_RELAXED)
+		old = __rte_cas_relaxed(dst, expected, desired);
+	else if (success == __ATOMIC_ACQUIRE)
+		old = __rte_cas_acquire(dst, expected, desired);
+	else if (success == __ATOMIC_RELEASE)
+		old = __rte_cas_release(dst, expected, desired);
+	else
+		old = __rte_cas_acq_rel(dst, expected, desired);
+#else
+	int ldx_mo = __MO_LOAD(success);
+	int stx_mo = __MO_STORE(success);
+	uint32_t ret = 1;
+	register rte_int128_t expected = *exp;
+	register rte_int128_t desired = *src;
+	register rte_int128_t old;
+
+	/* ldx128 can not guarantee atomic,
+	 * Must write back src or old to verify atomicity of ldx128;
+	 */
+	do {
+		if (ldx_mo == __ATOMIC_RELAXED)
+			old = __rte_ldx_relaxed(dst);
+		else
+			old = __rte_ldx_acquire(dst);
+
+		if (likely(old.int128 == expected.int128)) {
+			if (stx_mo == __ATOMIC_RELAXED)
+				ret = __rte_stx_relaxed(dst, desired);
+			else
+				ret = __rte_stx_release(dst, desired);
+		} else {
+			/* In the failure case (since 'weak' is ignored and only
+			 * weak == 0 is implemented), expected should contain the
+			 * atomically read value of dst. This means, 'old' needs
+			 * to be stored back to ensure it was read atomically.
+			 */
+			if (stx_mo == __ATOMIC_RELAXED)
+				ret = __rte_stx_relaxed(dst, old);
+			else
+				ret = __rte_stx_release(dst, old);
+		}
+	} while (unlikely(ret));
+#endif
+
+	/* Unconditionally updating expected removes
+	 * an 'if' statement.
+	 * expected should already be in register if
+	 * not in the cache.
+	 */
+	*exp = old;
+
+	return (old.int128 == expected.int128);
+}
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h b/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h
index e087c6c..1217129 100644
--- a/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h
+++ b/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h
@@ -212,18 +212,6 @@ static inline void rte_atomic64_clear(rte_atomic64_t *v)
 
 /*------------------------ 128 bit atomic operations -------------------------*/
 
-/**
- * 128-bit integer structure.
- */
-RTE_STD_C11
-typedef struct {
-	RTE_STD_C11
-	union {
-		uint64_t val[2];
-		__extension__ __int128 int128;
-	};
-} __rte_aligned(16) rte_int128_t;
-
 __rte_experimental
 static inline int
 rte_atomic128_cmp_exchange(rte_int128_t *dst,
diff --git a/lib/librte_eal/common/include/generic/rte_atomic.h b/lib/librte_eal/common/include/generic/rte_atomic.h
index 24ff7dc..e6ab15a 100644
--- a/lib/librte_eal/common/include/generic/rte_atomic.h
+++ b/lib/librte_eal/common/include/generic/rte_atomic.h
@@ -1081,6 +1081,20 @@ static inline void rte_atomic64_clear(rte_atomic64_t *v)
 
 /*------------------------ 128 bit atomic operations -------------------------*/
 
+/**
+ * 128-bit integer structure.
+ */
+RTE_STD_C11
+typedef struct {
+	RTE_STD_C11
+	union {
+		uint64_t val[2];
+#ifdef RTE_ARCH_64
+		__extension__ __int128 int128;
+#endif
+	};
+} __rte_aligned(16) rte_int128_t;
+
 #ifdef __DOXYGEN__
 
 /**
@@ -1093,7 +1107,8 @@ static inline void rte_atomic64_clear(rte_atomic64_t *v)
  *     *exp = *dst
  * @endcode
  *
- * @note This function is currently only available for the x86-64 platform.
+ * @note This function is currently available for the x86-64 and aarch64
+ * platforms.
  *
  * @note The success and failure arguments must be one of the __ATOMIC_* values
  * defined in the C++11 standard. For details on their behavior, refer to the
-- 
2.7.4


  parent reply	other threads:[~2019-07-23  5:57 UTC|newest]

Thread overview: 88+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-23  2:41 [dpdk-dev] [PATCH v1 " Phil Yang
2019-06-23  2:41 ` [dpdk-dev] [PATCH v1 2/3] test/atomic: add 128b compare and swap test Phil Yang
2019-06-23  2:41 ` [dpdk-dev] [PATCH v1 3/3] eal/stack: enable lock-free stack for aarch64 Phil Yang
2019-06-23  3:15 ` [dpdk-dev] [PATCH v2 1/3] eal/arm64: add 128-bit atomic compare exchange Phil Yang
2019-06-23  3:15   ` [dpdk-dev] [PATCH v2 2/3] test/atomic: add 128b compare and swap test Phil Yang
2019-06-24 15:09     ` Eads, Gage
2019-06-24 15:29       ` Phil Yang (Arm Technology China)
2019-06-23  3:15   ` [dpdk-dev] [PATCH v2 3/3] eal/stack: enable lock-free stack for aarch64 Phil Yang
2019-06-24 15:15     ` Eads, Gage
2019-06-24 15:22       ` Phil Yang (Arm Technology China)
2019-06-24 14:46   ` [dpdk-dev] [PATCH v2 1/3] eal/arm64: add 128-bit atomic compare exchange Eads, Gage
2019-06-24 15:35     ` Phil Yang (Arm Technology China)
2019-06-28  8:11 ` [dpdk-dev] [PATCH v3 " Phil Yang
2019-06-28  8:11   ` [dpdk-dev] [PATCH v3 2/3] test/atomic: add 128b compare and swap test Phil Yang
2019-06-29  0:17     ` Eads, Gage
2019-07-19  4:03     ` [dpdk-dev] [EXT] " Jerin Jacob Kollanukkaran
2019-06-28  8:11   ` [dpdk-dev] [PATCH v3 3/3] eal/stack: enable lock-free stack for aarch64 Phil Yang
2019-06-29  0:18     ` Eads, Gage
2019-07-19  4:18     ` [dpdk-dev] [EXT] " Jerin Jacob Kollanukkaran
2019-07-19  4:42       ` Eads, Gage
2019-07-19  5:02         ` Jerin Jacob Kollanukkaran
2019-07-19  5:15           ` Phil Yang (Arm Technology China)
2019-07-03 12:25   ` [dpdk-dev] [EXT] [PATCH v3 1/3] eal/arm64: add 128-bit atomic compare exchange Jerin Jacob Kollanukkaran
2019-07-03 13:07     ` Jerin Jacob Kollanukkaran
2019-07-05  4:20       ` Honnappa Nagarahalli
2019-07-05  4:37         ` Pavan Nikhilesh Bhagavatula
2019-07-09  9:27           ` Phil Yang (Arm Technology China)
2019-07-09 11:14             ` Jerin Jacob Kollanukkaran
2019-07-19  6:24   ` Jerin Jacob Kollanukkaran
2019-07-19 11:01     ` Phil Yang (Arm Technology China)
2019-07-19 12:35       ` Jerin Jacob Kollanukkaran
2019-07-19 13:56         ` Phil Yang (Arm Technology China)
2019-07-19 14:50           ` Eads, Gage
2019-07-22  8:44 ` [dpdk-dev] [PATCH v4 " Phil Yang
2019-07-22  8:44   ` [dpdk-dev] [PATCH v4 2/3] test/atomic: add 128b compare and swap test Phil Yang
2019-07-22  8:44   ` [dpdk-dev] [PATCH v4 3/3] eal/stack: enable lock-free stack for aarch64 Phil Yang
2019-07-22 10:22     ` [dpdk-dev] [EXT] " Jerin Jacob Kollanukkaran
2019-07-22 11:51       ` Phil Yang (Arm Technology China)
2019-07-22 10:20   ` [dpdk-dev] [EXT] [PATCH v4 1/3] eal/arm64: add 128-bit atomic compare exchange Jerin Jacob Kollanukkaran
2019-07-22 11:50     ` Phil Yang (Arm Technology China)
2019-07-22 13:06 ` [dpdk-dev] [PATCH v5 " Phil Yang
2019-07-22 13:06   ` [dpdk-dev] [PATCH v5 2/3] test/atomic: add 128b compare and swap test Phil Yang
2019-07-22 13:06   ` [dpdk-dev] [PATCH v5 3/3] eal/stack: enable lock-free stack for aarch64 Phil Yang
2019-07-22 14:14     ` [dpdk-dev] [EXT] " Jerin Jacob Kollanukkaran
2019-07-22 15:19       ` Phil Yang (Arm Technology China)
2019-07-22 14:34     ` [dpdk-dev] " Eads, Gage
2019-07-22 14:43       ` Phil Yang (Arm Technology China)
2019-07-22 14:19   ` [dpdk-dev] [EXT] [PATCH v5 1/3] eal/arm64: add 128-bit atomic compare exchange Jerin Jacob Kollanukkaran
2019-07-22 16:23     ` Phil Yang (Arm Technology China)
2019-07-22 16:22 ` [dpdk-dev] [PATCH v6 " Phil Yang
2019-07-22 16:22   ` [dpdk-dev] [PATCH v6 2/3] test/atomic: add 128b compare and swap test Phil Yang
2019-07-22 16:22   ` [dpdk-dev] [PATCH v6 3/3] eal/stack: enable lock-free stack for aarch64 Phil Yang
2019-07-22 16:59     ` [dpdk-dev] [EXT] " Jerin Jacob Kollanukkaran
2019-07-22 16:57   ` [dpdk-dev] [EXT] [PATCH v6 1/3] eal/arm64: add 128-bit atomic compare exchange Jerin Jacob Kollanukkaran
2019-07-23  3:28     ` Phil Yang (Arm Technology China)
2019-07-23  7:09       ` Jerin Jacob Kollanukkaran
2019-07-23  7:53         ` Phil Yang (Arm Technology China)
2019-07-23  5:57 ` Phil Yang [this message]
2019-07-23  5:57   ` [dpdk-dev] [PATCH v7 2/3] test/atomic: add 128b compare and swap test Phil Yang
2019-07-23  5:57   ` [dpdk-dev] [PATCH v7 3/3] eal/stack: enable lock-free stack for aarch64 Phil Yang
2019-07-23  7:05   ` [dpdk-dev] [PATCH v8 1/3] eal/arm64: add 128-bit atomic compare exchange jerinj
2019-07-23  7:05     ` [dpdk-dev] [PATCH v8 2/3] test/atomic: add 128b compare and swap test jerinj
2019-07-23  7:05     ` [dpdk-dev] [PATCH v8 3/3] eal/stack: enable lock-free stack for aarch64 jerinj
2019-08-14  8:27     ` [dpdk-dev] [PATCH v9 1/3] eal/arm64: add 128-bit atomic compare exchange Phil Yang
2019-08-14  8:27       ` [dpdk-dev] [PATCH v9 2/3] test/atomic: add 128b compare and swap test Phil Yang
2019-10-14 15:45         ` David Marchand
2019-10-15 11:32           ` Phil Yang (Arm Technology China)
2019-08-14  8:27       ` [dpdk-dev] [PATCH v9 3/3] eal/stack: enable lock-free stack for aarch64 Phil Yang
2019-10-14 15:45         ` David Marchand
2019-10-15 11:32           ` Phil Yang (Arm Technology China)
2019-10-14 15:43       ` [dpdk-dev] [PATCH v9 1/3] eal/arm64: add 128-bit atomic compare exchange David Marchand
2019-10-15 11:32         ` Phil Yang (Arm Technology China)
2019-10-15 12:16           ` David Marchand
2019-10-16  9:04             ` Phil Yang (Arm Technology China)
2019-10-17 12:45               ` David Marchand
2019-10-15 11:38       ` [dpdk-dev] [PATCH v10 " Phil Yang
2019-10-15 11:38         ` [dpdk-dev] [PATCH v10 2/3] test/atomic: add 128b compare and swap test Phil Yang
2019-10-15 11:38         ` [dpdk-dev] [PATCH v10 3/3] eal/stack: enable lock-free stack for aarch64 Phil Yang
2019-10-18 11:21         ` [dpdk-dev] [PATCH v11 1/3] eal/arm64: add 128-bit atomic compare exchange Phil Yang
2019-10-18 11:21           ` [dpdk-dev] [PATCH v11 2/3] test/atomic: add 128b compare and swap test Phil Yang
2019-10-21  8:25             ` David Marchand
2019-10-18 11:21           ` [dpdk-dev] [PATCH v11 3/3] eal/stack: enable lock-free stack for aarch64 Phil Yang
2019-10-21  8:26             ` David Marchand
2019-10-18 14:16           ` [dpdk-dev] [PATCH v11 1/3] eal/arm64: add 128-bit atomic compare exchange David Marchand
2019-10-18 14:24             ` Jerin Jacob
2019-10-18 14:33               ` David Marchand
2019-10-18 14:36                 ` Jerin Jacob
2019-10-21  8:24                   ` David Marchand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1563861443-14491-1-git-send-email-phil.yang@arm.com \
    --to=phil.yang@arm.com \
    --cc=Honnappa.Nagarahalli@arm.com \
    --cc=dev@dpdk.org \
    --cc=gage.eads@intel.com \
    --cc=gavin.hu@arm.com \
    --cc=hemant.agrawal@nxp.com \
    --cc=jerinj@marvell.com \
    --cc=nd@arm.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).