From: Andy Pei <andy.pei@intel.com>
To: dev@dpdk.org
Cc: rosen.xu@intel.com
Subject: [dpdk-dev] [PATCH] net/ipn3ke: setup MTU when HW init
Date: Thu, 8 Aug 2019 17:12:20 +0800 [thread overview]
Message-ID: <1565255540-308917-1-git-send-email-andy.pei@intel.com> (raw)
set up mtu to the minimun in tx mtu, rx mtu and IPN3KE_MAC_FRAME_SIZE_MAX.
Signed-off-by: Andy Pei <andy.pei@intel.com>
---
drivers/net/ipn3ke/ipn3ke_ethdev.c | 93 ++++++++++++++++++++++++++++++++++++++
drivers/net/ipn3ke/ipn3ke_ethdev.h | 19 ++++++++
2 files changed, 112 insertions(+)
diff --git a/drivers/net/ipn3ke/ipn3ke_ethdev.c b/drivers/net/ipn3ke/ipn3ke_ethdev.c
index c226d63..8c56152 100644
--- a/drivers/net/ipn3ke/ipn3ke_ethdev.c
+++ b/drivers/net/ipn3ke/ipn3ke_ethdev.c
@@ -209,6 +209,96 @@
return 0;
}
+static void ipn3ke_10G_mtu_setup
+(struct ipn3ke_hw *hw, uint32_t mac_num, uint32_t eth_group_sel)
+{
+ uint32_t tx;
+ uint32_t rx;
+ uint32_t tmp;
+
+ (*hw->f_mac_read)(hw,
+ &tx,
+ IPN3KE_10G_TX_FRAME_MAXLENGTH,
+ mac_num,
+ eth_group_sel);
+
+ (*hw->f_mac_read)(hw,
+ &rx,
+ IPN3KE_10G_RX_FRAME_MAXLENGTH,
+ mac_num,
+ eth_group_sel);
+
+ tmp = (tx > rx) ? rx : tx;
+ tmp = (tmp > IPN3KE_MAC_FRAME_SIZE_MAX) ?
+ IPN3KE_MAC_FRAME_SIZE_MAX : tmp;
+
+ (*hw->f_mac_write)(hw,
+ tmp,
+ IPN3KE_10G_TX_FRAME_MAXLENGTH,
+ mac_num,
+ eth_group_sel);
+
+ (*hw->f_mac_write)(hw,
+ tmp,
+ IPN3KE_10G_RX_FRAME_MAXLENGTH,
+ mac_num,
+ eth_group_sel);
+}
+
+static void ipn3ke_25G_mtu_setup
+(struct ipn3ke_hw *hw, uint32_t mac_num, uint32_t eth_group_sel)
+{
+ uint32_t tx;
+ uint32_t rx;
+ uint32_t tmp;
+
+ (*hw->f_mac_read)(hw,
+ &tx,
+ IPN3KE_25G_MAX_TX_SIZE_CONFIG,
+ mac_num,
+ eth_group_sel);
+
+ (*hw->f_mac_read)(hw,
+ &rx,
+ IPN3KE_25G_MAX_RX_SIZE_CONFIG,
+ mac_num,
+ eth_group_sel);
+
+ tmp = (tx > rx) ? rx : tx;
+ tmp = (tmp > IPN3KE_MAC_FRAME_SIZE_MAX) ?
+ IPN3KE_MAC_FRAME_SIZE_MAX : tmp;
+
+ (*hw->f_mac_write)(hw,
+ tmp,
+ IPN3KE_25G_MAX_TX_SIZE_CONFIG,
+ mac_num,
+ eth_group_sel);
+
+ (*hw->f_mac_write)(hw,
+ tmp,
+ IPN3KE_25G_MAX_RX_SIZE_CONFIG,
+ mac_num,
+ eth_group_sel);
+}
+
+static void
+ipn3ke_mtu_setup(struct ipn3ke_hw *hw)
+{
+ int i;
+ if (hw->retimer.mac_type == IFPGA_RAWDEV_RETIMER_MAC_TYPE_10GE_XFI) {
+ for (i = 0; i < hw->port_num; i++) {
+ ipn3ke_10G_mtu_setup(hw, i, 0);
+ ipn3ke_10G_mtu_setup(hw, i, 1);
+ }
+ } else if (hw->retimer.mac_type ==
+ IFPGA_RAWDEV_RETIMER_MAC_TYPE_25GE_25GAUI) {
+ for (i = 0; i < hw->port_num; i++) {
+ ipn3ke_25G_mtu_setup(hw, i, 0);
+ ipn3ke_25G_mtu_setup(hw, i, 1);
+ }
+ }
+}
+
static int
ipn3ke_hw_init(struct rte_afu_device *afu_dev,
struct ipn3ke_hw *hw)
@@ -303,6 +393,9 @@
}
}
+ /* init mtu */
+ ipn3ke_mtu_setup(hw);
+
ret = rte_eth_switch_domain_alloc(&hw->switch_domain_id);
if (ret)
IPN3KE_AFU_PMD_WARN("failed to allocate switch domain for device %d",
diff --git a/drivers/net/ipn3ke/ipn3ke_ethdev.h b/drivers/net/ipn3ke/ipn3ke_ethdev.h
index c7b336b..6419da3 100644
--- a/drivers/net/ipn3ke/ipn3ke_ethdev.h
+++ b/drivers/net/ipn3ke/ipn3ke_ethdev.h
@@ -654,6 +654,25 @@ static inline void _ipn3ke_indrct_write(struct ipn3ke_hw *hw,
#define IPN3KE_MAC_RX_FRAME_MAXLENGTH_MASK \
IPN3KE_MASK(0xFFFF, IPN3KE_MAC_RX_FRAME_MAXLENGTH_SHIFT)
+/* Additional Feature Register */
+#define ADD_PHY_CTRL 0x0
+#define PHY_RESET BIT(0)
+/* registers for 25G/40G mac */
+#define MAC_CONFIG 0x310
+#define MAC_RESET_MASK GENMASK(2, 0)
+
+#define IPN3KE_MAX_MTU 0xffff
+
+#define IPN3KE_25G_PHY_PMA_SLOOP 0x313
+#define IPN3KE_25G_TX_FLOW_CTRL 0x640
+#define IPN3KE_25G_MAX_TX_SIZE_CONFIG 0x407
+#define IPN3KE_25G_MAX_RX_SIZE_CONFIG 0x506
+
+#define IPN3KE_10G_TX_PAUSE_FRAME_QUANTA 0x0042
+#define IPN3KE_10G_TX_PAUSE_FRAME_HOLDOFF 0x0043
+#define IPN3KE_10G_TX_FRAME_MAXLENGTH 0x002C
+#define IPN3KE_10G_RX_FRAME_MAXLENGTH 0x00AE
+
#define IPN3KE_REGISTER_WIDTH 32
/*Bits[2:0]: Configuration of TX statistics counters:
--
1.8.3.1
next reply other threads:[~2019-08-08 9:21 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-08 9:12 Andy Pei [this message]
2019-08-08 16:01 ` [dpdk-dev] [PATCH v2] " Andy Pei
2019-08-21 6:15 ` Ye Xiaolong
2019-09-02 3:01 ` Pei, Andy
2019-09-02 2:54 ` [dpdk-dev] [PATCH v3] " Andy Pei
2019-09-02 9:23 ` Ye Xiaolong
2019-09-03 2:34 ` Pei, Andy
2019-09-03 6:23 ` Ye Xiaolong
2019-09-03 6:29 ` Pei, Andy
2019-09-03 8:35 ` Ye Xiaolong
2019-09-03 8:46 ` Pei, Andy
2019-09-03 8:46 ` [dpdk-dev] [PATCH v4] " Andy Pei
2019-09-03 13:31 ` Ye Xiaolong
2019-09-04 2:05 ` Pei, Andy
2019-09-04 1:52 ` [dpdk-dev] [PATCH v5] " Andy Pei
2019-09-18 9:00 ` Ye Xiaolong
2019-09-24 8:59 ` Xu, Rosen
2019-09-24 9:38 ` Ye Xiaolong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1565255540-308917-1-git-send-email-andy.pei@intel.com \
--to=andy.pei@intel.com \
--cc=dev@dpdk.org \
--cc=rosen.xu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).