DPDK patches and discussions
 help / color / Atom feed
From: Xiao Zhang <xiao.zhang@intel.com>
To: dev@dpdk.org
Cc: beilei.xing@intel.com, Xiao Zhang <xiao.zhang@intel.com>,
	stable@dpdk.org
Subject: [dpdk-dev] [v3] net/i40e: fix vf runtime queues rss config
Date: Mon, 12 Aug 2019 18:29:07 +0800
Message-ID: <1565605747-7575-1-git-send-email-xiao.zhang@intel.com> (raw)
In-Reply-To: <1565282473-35661-1-git-send-email-xiao.zhang@intel.com>

I40evf queue can not work properly with kernel pf driver. Eg. when
configure 8 queues pair, only 4 queues can receive packets, and half
packets will be lost if using 2 queues pair.
This issue is caused by misconfiguration of look up table, use aq command
to setup the lut to make it work properly.

Fixes: cea7a51c1750 ("i40evf: support RSS")
Cc: stable@dpdk.org

Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
---
v3 move LUT configuration in to i40evf_configure_rss
v2 change for loop format to avoid build patch issue
---
 drivers/net/i40e/i40e_ethdev_vf.c | 32 ++++++++++++++++++++++++++------
 1 file changed, 26 insertions(+), 6 deletions(-)

diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 308fb98..ad685c6 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -2608,12 +2608,32 @@ i40evf_config_rss(struct i40e_vf *vf)
 
 	num = RTE_MIN(vf->dev_data->nb_rx_queues, I40E_MAX_QP_NUM_PER_VF);
 	/* Fill out the look up table */
-	for (i = 0, j = 0; i < nb_q; i++, j++) {
-		if (j >= num)
-			j = 0;
-		lut = (lut << 8) | j;
-		if ((i & 3) == 3)
-			I40E_WRITE_REG(hw, I40E_VFQF_HLUT(i >> 2), lut);
+	if (!(vf->flags & I40E_FLAG_RSS_AQ_CAPABLE)) {
+		for (i = 0, j = 0; i < nb_q; i++, j++) {
+			if (j >= num)
+				j = 0;
+			lut = (lut << 8) | j;
+			if ((i & 3) == 3)
+				I40E_WRITE_REG(hw, I40E_VFQF_HLUT(i >> 2), lut);
+		}
+	} else {
+		uint8_t *lut;
+		uint32_t rss_lut_size = (I40E_VFQF_HLUT1_MAX_INDEX + 1) * 4;
+		int ret;
+		lut = rte_zmalloc("i40e_rss_lut", rss_lut_size, 0);
+		if (!lut) {
+			PMD_DRV_LOG(ERR, "No memory can be allocated");
+			return -ENOMEM;
+		}
+
+		for (i = 0; i < rss_lut_size; i++)
+			lut[i] = i % vf->num_queue_pairs;
+
+		ret = i40evf_set_rss_lut(&vf->vsi, lut,
+					 rss_lut_size);
+		rte_free(lut);
+		if (ret)
+			return ret;
 	}
 
 	rss_conf = vf->dev_data->dev_conf.rx_adv_conf.rss_conf;
-- 
2.7.4


  parent reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-07  0:09 [dpdk-dev] " Xiao Zhang
2019-08-08 16:41 ` [dpdk-dev] [v2] " Xiao Zhang
2019-08-09  2:44   ` Xing, Beilei
2019-08-09  3:25     ` Zhang, Xiao
2019-08-12 10:29   ` Xiao Zhang [this message]
2019-08-12 17:43     ` [dpdk-dev] [v4] " Xiao Zhang
2019-08-12 12:07       ` Aaron Conole
2019-08-13  1:43       ` Xing, Beilei
2019-08-13 10:40       ` [dpdk-dev] [v5] " Xiao Zhang
2019-08-13  2:21         ` Xing, Beilei
2019-08-13  6:28         ` Ye Xiaolong
2019-08-13  7:24           ` Zhang, Xiao
2019-08-13  7:37             ` Ye Xiaolong
2019-08-13  7:59               ` Zhang, Xiao
2019-08-13 22:17         ` [dpdk-dev] [v6] " Xiao Zhang
2019-08-13 14:55           ` Ye Xiaolong

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1565605747-7575-1-git-send-email-xiao.zhang@intel.com \
    --to=xiao.zhang@intel.com \
    --cc=beilei.xing@intel.com \
    --cc=dev@dpdk.org \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ http://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox