* [dpdk-dev] net/e1000: correct mb function
@ 2019-09-10 17:41 Xiao Zhang
2019-09-11 3:21 ` Gavin Hu (Arm Technology China)
2019-09-11 9:30 ` Ye Xiaolong
0 siblings, 2 replies; 3+ messages in thread
From: Xiao Zhang @ 2019-09-10 17:41 UTC (permalink / raw)
To: dev; +Cc: wenzhuo.lu, Xiao Zhang, stable
Use rte_cio_wmb instead of rte_wmb when writing TX descriptor since it's
CIO memory.
Replace rte_io_wmb and E1000_PCI_REG_WRITE_RELAXED with
E1000_PCI_REG_WRITE since it has rte_io_wmb inside, which will be more
clear.
Fixes: 1fc9701238ed ("net/e1000: fix i219 hang on reset/close")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
---
drivers/net/e1000/em_rxtx.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/e1000/em_rxtx.c b/drivers/net/e1000/em_rxtx.c
index 5925e49..49c5371 100644
--- a/drivers/net/e1000/em_rxtx.c
+++ b/drivers/net/e1000/em_rxtx.c
@@ -2049,13 +2049,12 @@ e1000_flush_tx_ring(struct rte_eth_dev *dev)
tx_desc->lower.data = rte_cpu_to_le_32(txd_lower | size);
tx_desc->upper.data = 0;
- rte_wmb();
+ rte_cio_wmb();
txq->tx_tail++;
if (txq->tx_tail == txq->nb_tx_desc)
txq->tx_tail = 0;
- rte_io_wmb();
tdt_reg_addr = E1000_PCI_REG_ADDR(hw, E1000_TDT(i));
- E1000_PCI_REG_WRITE_RELAXED(tdt_reg_addr, txq->tx_tail);
+ E1000_PCI_REG_WRITE(tdt_reg_addr, txq->tx_tail);
usec_delay(250);
}
}
--
2.7.4
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [dpdk-dev] net/e1000: correct mb function
2019-09-10 17:41 [dpdk-dev] net/e1000: correct mb function Xiao Zhang
@ 2019-09-11 3:21 ` Gavin Hu (Arm Technology China)
2019-09-11 9:30 ` Ye Xiaolong
1 sibling, 0 replies; 3+ messages in thread
From: Gavin Hu (Arm Technology China) @ 2019-09-11 3:21 UTC (permalink / raw)
To: Xiao Zhang, dev
Cc: wenzhuo.lu, stable, Honnappa Nagarahalli, Steve Capper,
Phil Yang (Arm Technology China),
Joyce Kong (Arm Technology China),
nd
> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Xiao Zhang
> Sent: Wednesday, September 11, 2019 1:41 AM
> To: dev@dpdk.org
> Cc: wenzhuo.lu@intel.com; Xiao Zhang <xiao.zhang@intel.com>;
> stable@dpdk.org
> Subject: [dpdk-dev] net/e1000: correct mb function
>
> Use rte_cio_wmb instead of rte_wmb when writing TX descriptor since it's
> CIO memory.
> Replace rte_io_wmb and E1000_PCI_REG_WRITE_RELAXED with
> E1000_PCI_REG_WRITE since it has rte_io_wmb inside, which will be more
> clear.
>
> Fixes: 1fc9701238ed ("net/e1000: fix i219 hang on reset/close")
> Cc: stable@dpdk.org
>
> Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
> ---
> drivers/net/e1000/em_rxtx.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/e1000/em_rxtx.c b/drivers/net/e1000/em_rxtx.c
> index 5925e49..49c5371 100644
> --- a/drivers/net/e1000/em_rxtx.c
> +++ b/drivers/net/e1000/em_rxtx.c
> @@ -2049,13 +2049,12 @@ e1000_flush_tx_ring(struct rte_eth_dev *dev)
> tx_desc->lower.data = rte_cpu_to_le_32(txd_lower | size);
> tx_desc->upper.data = 0;
>
> - rte_wmb();
> + rte_cio_wmb();
> txq->tx_tail++;
> if (txq->tx_tail == txq->nb_tx_desc)
> txq->tx_tail = 0;
> - rte_io_wmb();
> tdt_reg_addr = E1000_PCI_REG_ADDR(hw, E1000_TDT(i));
> - E1000_PCI_REG_WRITE_RELAXED(tdt_reg_addr, txq->tx_tail);
> + E1000_PCI_REG_WRITE(tdt_reg_addr, txq->tx_tail);
> usec_delay(250);
> }
> }
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
> --
> 2.7.4
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [dpdk-dev] net/e1000: correct mb function
2019-09-10 17:41 [dpdk-dev] net/e1000: correct mb function Xiao Zhang
2019-09-11 3:21 ` Gavin Hu (Arm Technology China)
@ 2019-09-11 9:30 ` Ye Xiaolong
1 sibling, 0 replies; 3+ messages in thread
From: Ye Xiaolong @ 2019-09-11 9:30 UTC (permalink / raw)
To: Xiao Zhang; +Cc: dev, wenzhuo.lu, stable
On 09/11, Xiao Zhang wrote:
>Use rte_cio_wmb instead of rte_wmb when writing TX descriptor since it's
>CIO memory.
>Replace rte_io_wmb and E1000_PCI_REG_WRITE_RELAXED with
>E1000_PCI_REG_WRITE since it has rte_io_wmb inside, which will be more
>clear.
>
>Fixes: 1fc9701238ed ("net/e1000: fix i219 hang on reset/close")
>Cc: stable@dpdk.org
>
>Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
>---
> drivers/net/e1000/em_rxtx.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
>diff --git a/drivers/net/e1000/em_rxtx.c b/drivers/net/e1000/em_rxtx.c
>index 5925e49..49c5371 100644
>--- a/drivers/net/e1000/em_rxtx.c
>+++ b/drivers/net/e1000/em_rxtx.c
>@@ -2049,13 +2049,12 @@ e1000_flush_tx_ring(struct rte_eth_dev *dev)
> tx_desc->lower.data = rte_cpu_to_le_32(txd_lower | size);
> tx_desc->upper.data = 0;
>
>- rte_wmb();
>+ rte_cio_wmb();
> txq->tx_tail++;
> if (txq->tx_tail == txq->nb_tx_desc)
> txq->tx_tail = 0;
>- rte_io_wmb();
> tdt_reg_addr = E1000_PCI_REG_ADDR(hw, E1000_TDT(i));
>- E1000_PCI_REG_WRITE_RELAXED(tdt_reg_addr, txq->tx_tail);
>+ E1000_PCI_REG_WRITE(tdt_reg_addr, txq->tx_tail);
> usec_delay(250);
> }
> }
>--
>2.7.4
>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Applied to dpdk-next-net-intel with Gavin's reviewed-by tag.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-09-11 9:32 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-10 17:41 [dpdk-dev] net/e1000: correct mb function Xiao Zhang
2019-09-11 3:21 ` Gavin Hu (Arm Technology China)
2019-09-11 9:30 ` Ye Xiaolong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).