From: "Wei Hu (Xavier)" <xavier.huwei@huawei.com>
To: <dev@dpdk.org>
Cc: <linuxarm@huawei.com>, <xavier_huwei@163.com>,
<xavier.huwei@tom.com>, <forest.zhouchang@huawei.com>
Subject: [dpdk-dev] [PATCH v3 13/22] net/hns3: add support for vlan of hns3 PMD driver
Date: Thu, 26 Sep 2019 22:01:59 +0800 [thread overview]
Message-ID: <1569506528-60464-14-git-send-email-xavier.huwei@huawei.com> (raw)
In-Reply-To: <1569506528-60464-1-git-send-email-xavier.huwei@huawei.com>
This patch adds support for vlan related operation of hns3 PMD driver.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
---
v1 -> v2:
Add VLAN filter and VLAN offload feature into hns3.ini file
according to Ferruh Yigit's comments.
---
doc/guides/nics/features/hns3.ini | 2 +
drivers/net/hns3/hns3_ethdev.c | 701 ++++++++++++++++++++++++++++++++++++++
2 files changed, 703 insertions(+)
diff --git a/doc/guides/nics/features/hns3.ini b/doc/guides/nics/features/hns3.ini
index 7efbaf8..c57afde 100644
--- a/doc/guides/nics/features/hns3.ini
+++ b/doc/guides/nics/features/hns3.ini
@@ -12,9 +12,11 @@ RSS hash = Y
RSS key update = Y
RSS reta update = Y
DCB = Y
+VLAN filter = Y
Flow director = Y
Flow control = Y
Flow API = Y
+VLAN offload = Y
FW version = Y
Linux UIO = Y
Linux VFIO = Y
diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index ca84e63..2f9acee 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -30,10 +30,701 @@
#define HNS3_DEFAULT_PORT_CONF_QUEUES_NUM 1
#define HNS3_SERVICE_INTERVAL 1000000 /* us */
+#define HNS3_PORT_BASE_VLAN_DISABLE 0
+#define HNS3_PORT_BASE_VLAN_ENABLE 1
+#define HNS3_INVLID_PVID 0xFFFF
+
+#define HNS3_FILTER_TYPE_VF 0
+#define HNS3_FILTER_TYPE_PORT 1
+#define HNS3_FILTER_FE_EGRESS_V1_B BIT(0)
+#define HNS3_FILTER_FE_NIC_INGRESS_B BIT(0)
+#define HNS3_FILTER_FE_NIC_EGRESS_B BIT(1)
+#define HNS3_FILTER_FE_ROCE_INGRESS_B BIT(2)
+#define HNS3_FILTER_FE_ROCE_EGRESS_B BIT(3)
+#define HNS3_FILTER_FE_EGRESS (HNS3_FILTER_FE_NIC_EGRESS_B \
+ | HNS3_FILTER_FE_ROCE_EGRESS_B)
+#define HNS3_FILTER_FE_INGRESS (HNS3_FILTER_FE_NIC_INGRESS_B \
+ | HNS3_FILTER_FE_ROCE_INGRESS_B)
int hns3_logtype_init;
int hns3_logtype_driver;
+static int hns3_vlan_pvid_configure(struct hns3_adapter *hns, uint16_t pvid,
+ int on);
+
+static int
+hns3_set_port_vlan_filter(struct hns3_adapter *hns, uint16_t vlan_id, int on)
+{
+#define HNS3_VLAN_OFFSET_160 160
+ struct hns3_vlan_filter_pf_cfg_cmd *req;
+ struct hns3_hw *hw = &hns->hw;
+ uint8_t vlan_offset_byte_val;
+ struct hns3_cmd_desc desc;
+ uint8_t vlan_offset_byte;
+ uint8_t vlan_offset_160;
+ int ret;
+
+ hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_VLAN_FILTER_PF_CFG, false);
+
+ vlan_offset_160 = vlan_id / HNS3_VLAN_OFFSET_160;
+ vlan_offset_byte = (vlan_id % HNS3_VLAN_OFFSET_160) / 8;
+ vlan_offset_byte_val = 1 << (vlan_id % 8);
+
+ req = (struct hns3_vlan_filter_pf_cfg_cmd *)desc.data;
+ req->vlan_offset = vlan_offset_160;
+ req->vlan_cfg = on ? 0 : 1;
+ req->vlan_offset_bitmap[vlan_offset_byte] = vlan_offset_byte_val;
+
+ ret = hns3_cmd_send(hw, &desc, 1);
+ if (ret)
+ hns3_err(hw, "set port vlan id failed, vlan_id =%u, ret =%d",
+ vlan_id, ret);
+
+ return ret;
+}
+
+static void
+hns3_rm_dev_vlan_table(struct hns3_adapter *hns, uint16_t vlan_id)
+{
+ struct hns3_user_vlan_table *vlan_entry;
+ struct hns3_pf *pf = &hns->pf;
+
+ LIST_FOREACH(vlan_entry, &pf->vlan_list, next) {
+ if (vlan_entry->vlan_id == vlan_id) {
+ if (vlan_entry->hd_tbl_status)
+ hns3_set_port_vlan_filter(hns, vlan_id, 0);
+ LIST_REMOVE(vlan_entry, next);
+ rte_free(vlan_entry);
+ break;
+ }
+ }
+}
+
+static void
+hns3_add_dev_vlan_table(struct hns3_adapter *hns, uint16_t vlan_id,
+ bool writen_to_tbl)
+{
+ struct hns3_user_vlan_table *vlan_entry;
+ struct hns3_hw *hw = &hns->hw;
+ struct hns3_pf *pf = &hns->pf;
+
+ vlan_entry = rte_zmalloc("hns3_vlan_tbl", sizeof(*vlan_entry), 0);
+ if (vlan_entry == NULL) {
+ hns3_err(hw, "Failed to malloc hns3 vlan table");
+ return;
+ }
+
+ vlan_entry->hd_tbl_status = writen_to_tbl;
+ vlan_entry->vlan_id = vlan_id;
+
+ LIST_INSERT_HEAD(&pf->vlan_list, vlan_entry, next);
+}
+
+static int
+hns3_vlan_filter_configure(struct hns3_adapter *hns, uint16_t vlan_id, int on)
+{
+ struct hns3_pf *pf = &hns->pf;
+ bool writen_to_tbl = false;
+ int ret = 0;
+
+ /*
+ * When vlan filter is enabled, hardware regards vlan id 0 as the entry
+ * for normal packet, deleting vlan id 0 is not allowed.
+ */
+ if (on == 0 && vlan_id == 0)
+ return 0;
+
+ /*
+ * When port base vlan enabled, we use port base vlan as the vlan
+ * filter condition. In this case, we don't update vlan filter table
+ * when user add new vlan or remove exist vlan, just update the
+ * vlan list. The vlan id in vlan list will be writen in vlan filter
+ * table until port base vlan disabled
+ */
+ if (pf->port_base_vlan_cfg.state == HNS3_PORT_BASE_VLAN_DISABLE) {
+ ret = hns3_set_port_vlan_filter(hns, vlan_id, on);
+ writen_to_tbl = true;
+ }
+
+ if (ret == 0 && vlan_id) {
+ if (on)
+ hns3_add_dev_vlan_table(hns, vlan_id, writen_to_tbl);
+ else
+ hns3_rm_dev_vlan_table(hns, vlan_id);
+ }
+ return ret;
+}
+
+static int
+hns3_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct hns3_adapter *hns = dev->data->dev_private;
+ struct hns3_hw *hw = &hns->hw;
+ int ret;
+
+ rte_spinlock_lock(&hw->lock);
+ ret = hns3_vlan_filter_configure(hns, vlan_id, on);
+ rte_spinlock_unlock(&hw->lock);
+ return ret;
+}
+
+static int
+hns3_vlan_tpid_configure(struct hns3_adapter *hns, enum rte_vlan_type vlan_type,
+ uint16_t tpid)
+{
+ struct hns3_rx_vlan_type_cfg_cmd *rx_req;
+ struct hns3_tx_vlan_type_cfg_cmd *tx_req;
+ struct hns3_hw *hw = &hns->hw;
+ struct hns3_cmd_desc desc;
+ int ret;
+
+ if ((vlan_type != ETH_VLAN_TYPE_INNER &&
+ vlan_type != ETH_VLAN_TYPE_OUTER)) {
+ hns3_err(hw, "Unsupported vlan type, vlan_type =%d", vlan_type);
+ return -EINVAL;
+ }
+
+ if (tpid != RTE_ETHER_TYPE_VLAN) {
+ hns3_err(hw, "Unsupported vlan tpid, vlan_type =%d", vlan_type);
+ return -EINVAL;
+ }
+
+ hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_MAC_VLAN_TYPE_ID, false);
+ rx_req = (struct hns3_rx_vlan_type_cfg_cmd *)desc.data;
+
+ if (vlan_type == ETH_VLAN_TYPE_OUTER) {
+ rx_req->ot_fst_vlan_type = rte_cpu_to_le_16(tpid);
+ rx_req->ot_sec_vlan_type = rte_cpu_to_le_16(tpid);
+ } else if (vlan_type == ETH_VLAN_TYPE_INNER) {
+ rx_req->ot_fst_vlan_type = rte_cpu_to_le_16(tpid);
+ rx_req->ot_sec_vlan_type = rte_cpu_to_le_16(tpid);
+ rx_req->in_fst_vlan_type = rte_cpu_to_le_16(tpid);
+ rx_req->in_sec_vlan_type = rte_cpu_to_le_16(tpid);
+ }
+
+ ret = hns3_cmd_send(hw, &desc, 1);
+ if (ret) {
+ hns3_err(hw, "Send rxvlan protocol type command fail, ret =%d",
+ ret);
+ return ret;
+ }
+
+ hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_MAC_VLAN_INSERT, false);
+
+ tx_req = (struct hns3_tx_vlan_type_cfg_cmd *)desc.data;
+ tx_req->ot_vlan_type = rte_cpu_to_le_16(tpid);
+ tx_req->in_vlan_type = rte_cpu_to_le_16(tpid);
+
+ ret = hns3_cmd_send(hw, &desc, 1);
+ if (ret)
+ hns3_err(hw, "Send txvlan protocol type command fail, ret =%d",
+ ret);
+ return ret;
+}
+
+static int
+hns3_vlan_tpid_set(struct rte_eth_dev *dev, enum rte_vlan_type vlan_type,
+ uint16_t tpid)
+{
+ struct hns3_adapter *hns = dev->data->dev_private;
+ struct hns3_hw *hw = &hns->hw;
+ int ret;
+
+ rte_spinlock_lock(&hw->lock);
+ ret = hns3_vlan_tpid_configure(hns, vlan_type, tpid);
+ rte_spinlock_unlock(&hw->lock);
+ return ret;
+}
+
+static int
+hns3_set_vlan_rx_offload_cfg(struct hns3_adapter *hns,
+ struct hns3_rx_vtag_cfg *vcfg)
+{
+ struct hns3_vport_vtag_rx_cfg_cmd *req;
+ struct hns3_hw *hw = &hns->hw;
+ struct hns3_cmd_desc desc;
+ uint16_t vport_id;
+ uint8_t bitmap;
+ int ret;
+
+ hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_VLAN_PORT_RX_CFG, false);
+
+ req = (struct hns3_vport_vtag_rx_cfg_cmd *)desc.data;
+ hns3_set_bit(req->vport_vlan_cfg, HNS3_REM_TAG1_EN_B,
+ vcfg->strip_tag1_en ? 1 : 0);
+ hns3_set_bit(req->vport_vlan_cfg, HNS3_REM_TAG2_EN_B,
+ vcfg->strip_tag2_en ? 1 : 0);
+ hns3_set_bit(req->vport_vlan_cfg, HNS3_SHOW_TAG1_EN_B,
+ vcfg->vlan1_vlan_prionly ? 1 : 0);
+ hns3_set_bit(req->vport_vlan_cfg, HNS3_SHOW_TAG2_EN_B,
+ vcfg->vlan2_vlan_prionly ? 1 : 0);
+
+ /*
+ * In current version VF is not supported when PF is driven by DPDK
+ * driver, the PF-related vf_id is 0, just need to configure parameters
+ * for vport_id 0.
+ */
+ vport_id = 0;
+ req->vf_offset = vport_id / HNS3_VF_NUM_PER_CMD;
+ bitmap = 1 << (vport_id % HNS3_VF_NUM_PER_BYTE);
+ req->vf_bitmap[req->vf_offset] = bitmap;
+
+ ret = hns3_cmd_send(hw, &desc, 1);
+ if (ret)
+ hns3_err(hw, "Send port rxvlan cfg command fail, ret =%d", ret);
+ return ret;
+}
+
+static void
+hns3_update_rx_offload_cfg(struct hns3_adapter *hns,
+ struct hns3_rx_vtag_cfg *vcfg)
+{
+ struct hns3_pf *pf = &hns->pf;
+ memcpy(&pf->vtag_config.rx_vcfg, vcfg, sizeof(pf->vtag_config.rx_vcfg));
+}
+
+static void
+hns3_update_tx_offload_cfg(struct hns3_adapter *hns,
+ struct hns3_tx_vtag_cfg *vcfg)
+{
+ struct hns3_pf *pf = &hns->pf;
+ memcpy(&pf->vtag_config.tx_vcfg, vcfg, sizeof(pf->vtag_config.tx_vcfg));
+}
+
+static int
+hns3_en_hw_strip_rxvtag(struct hns3_adapter *hns, bool enable)
+{
+ struct hns3_rx_vtag_cfg rxvlan_cfg;
+ struct hns3_pf *pf = &hns->pf;
+ struct hns3_hw *hw = &hns->hw;
+ int ret;
+
+ if (pf->port_base_vlan_cfg.state == HNS3_PORT_BASE_VLAN_DISABLE) {
+ rxvlan_cfg.strip_tag1_en = false;
+ rxvlan_cfg.strip_tag2_en = enable;
+ } else {
+ rxvlan_cfg.strip_tag1_en = enable;
+ rxvlan_cfg.strip_tag2_en = true;
+ }
+
+ rxvlan_cfg.vlan1_vlan_prionly = false;
+ rxvlan_cfg.vlan2_vlan_prionly = false;
+ rxvlan_cfg.rx_vlan_offload_en = enable;
+
+ ret = hns3_set_vlan_rx_offload_cfg(hns, &rxvlan_cfg);
+ if (ret) {
+ hns3_err(hw, "enable strip rx vtag failed, ret =%d", ret);
+ return ret;
+ }
+
+ hns3_update_rx_offload_cfg(hns, &rxvlan_cfg);
+
+ return ret;
+}
+
+static int
+hns3_set_vlan_filter_ctrl(struct hns3_hw *hw, uint8_t vlan_type,
+ uint8_t fe_type, bool filter_en, uint8_t vf_id)
+{
+ struct hns3_vlan_filter_ctrl_cmd *req;
+ struct hns3_cmd_desc desc;
+ int ret;
+
+ hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_VLAN_FILTER_CTRL, false);
+
+ req = (struct hns3_vlan_filter_ctrl_cmd *)desc.data;
+ req->vlan_type = vlan_type;
+ req->vlan_fe = filter_en ? fe_type : 0;
+ req->vf_id = vf_id;
+
+ ret = hns3_cmd_send(hw, &desc, 1);
+ if (ret)
+ hns3_err(hw, "set vlan filter fail, ret =%d", ret);
+
+ return ret;
+}
+
+static int
+hns3_enable_vlan_filter(struct hns3_adapter *hns, bool enable)
+{
+ struct hns3_hw *hw = &hns->hw;
+ int ret;
+
+ ret = hns3_set_vlan_filter_ctrl(hw, HNS3_FILTER_TYPE_VF,
+ HNS3_FILTER_FE_EGRESS, false, 0);
+ if (ret) {
+ hns3_err(hw, "hns3 enable filter fail, ret =%d", ret);
+ return ret;
+ }
+
+ ret = hns3_set_vlan_filter_ctrl(hw, HNS3_FILTER_TYPE_PORT,
+ HNS3_FILTER_FE_INGRESS, enable, 0);
+ if (ret)
+ hns3_err(hw, "hns3 enable filter fail, ret =%d", ret);
+
+ return ret;
+}
+
+static int
+hns3_vlan_offload_set(struct rte_eth_dev *dev, int mask)
+{
+ struct hns3_adapter *hns = dev->data->dev_private;
+ struct hns3_hw *hw = &hns->hw;
+ struct rte_eth_rxmode *rxmode;
+ unsigned int tmp_mask;
+ bool enable;
+ int ret = 0;
+
+ rte_spinlock_lock(&hw->lock);
+ rxmode = &dev->data->dev_conf.rxmode;
+ tmp_mask = (unsigned int)mask;
+ if (tmp_mask & ETH_VLAN_STRIP_MASK) {
+ /* Enable or disable VLAN stripping */
+ enable = rxmode->offloads & DEV_RX_OFFLOAD_VLAN_STRIP ?
+ true : false;
+
+ ret = hns3_en_hw_strip_rxvtag(hns, enable);
+ if (ret) {
+ rte_spinlock_unlock(&hw->lock);
+ hns3_err(hw, "failed to enable rx strip, ret =%d", ret);
+ return ret;
+ }
+ }
+
+ rte_spinlock_unlock(&hw->lock);
+
+ return ret;
+}
+
+static int
+hns3_set_vlan_tx_offload_cfg(struct hns3_adapter *hns,
+ struct hns3_tx_vtag_cfg *vcfg)
+{
+ struct hns3_vport_vtag_tx_cfg_cmd *req;
+ struct hns3_cmd_desc desc;
+ struct hns3_hw *hw = &hns->hw;
+ uint16_t vport_id;
+ uint8_t bitmap;
+ int ret;
+
+ hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_VLAN_PORT_TX_CFG, false);
+
+ req = (struct hns3_vport_vtag_tx_cfg_cmd *)desc.data;
+ req->def_vlan_tag1 = vcfg->default_tag1;
+ req->def_vlan_tag2 = vcfg->default_tag2;
+ hns3_set_bit(req->vport_vlan_cfg, HNS3_ACCEPT_TAG1_B,
+ vcfg->accept_tag1 ? 1 : 0);
+ hns3_set_bit(req->vport_vlan_cfg, HNS3_ACCEPT_UNTAG1_B,
+ vcfg->accept_untag1 ? 1 : 0);
+ hns3_set_bit(req->vport_vlan_cfg, HNS3_ACCEPT_TAG2_B,
+ vcfg->accept_tag2 ? 1 : 0);
+ hns3_set_bit(req->vport_vlan_cfg, HNS3_ACCEPT_UNTAG2_B,
+ vcfg->accept_untag2 ? 1 : 0);
+ hns3_set_bit(req->vport_vlan_cfg, HNS3_PORT_INS_TAG1_EN_B,
+ vcfg->insert_tag1_en ? 1 : 0);
+ hns3_set_bit(req->vport_vlan_cfg, HNS3_PORT_INS_TAG2_EN_B,
+ vcfg->insert_tag2_en ? 1 : 0);
+ hns3_set_bit(req->vport_vlan_cfg, HNS3_CFG_NIC_ROCE_SEL_B, 0);
+
+ /*
+ * In current version VF is not supported when PF is driven by DPDK
+ * driver, the PF-related vf_id is 0, just need to configure parameters
+ * for vport_id 0.
+ */
+ vport_id = 0;
+ req->vf_offset = vport_id / HNS3_VF_NUM_PER_CMD;
+ bitmap = 1 << (vport_id % HNS3_VF_NUM_PER_BYTE);
+ req->vf_bitmap[req->vf_offset] = bitmap;
+
+ ret = hns3_cmd_send(hw, &desc, 1);
+ if (ret)
+ hns3_err(hw, "Send port txvlan cfg command fail, ret =%d", ret);
+
+ return ret;
+}
+
+static int
+hns3_vlan_txvlan_cfg(struct hns3_adapter *hns, uint16_t port_base_vlan_state,
+ uint16_t pvid)
+{
+ struct hns3_hw *hw = &hns->hw;
+ struct hns3_tx_vtag_cfg txvlan_cfg;
+ int ret;
+
+ if (port_base_vlan_state == HNS3_PORT_BASE_VLAN_DISABLE) {
+ txvlan_cfg.accept_tag1 = true;
+ txvlan_cfg.insert_tag1_en = false;
+ txvlan_cfg.default_tag1 = 0;
+ } else {
+ txvlan_cfg.accept_tag1 = false;
+ txvlan_cfg.insert_tag1_en = true;
+ txvlan_cfg.default_tag1 = pvid;
+ }
+
+ txvlan_cfg.accept_untag1 = true;
+ txvlan_cfg.accept_tag2 = true;
+ txvlan_cfg.accept_untag2 = true;
+ txvlan_cfg.insert_tag2_en = false;
+ txvlan_cfg.default_tag2 = 0;
+
+ ret = hns3_set_vlan_tx_offload_cfg(hns, &txvlan_cfg);
+ if (ret) {
+ hns3_err(hw, "pf vlan set pvid failed, pvid =%u ,ret =%d", pvid,
+ ret);
+ return ret;
+ }
+
+ hns3_update_tx_offload_cfg(hns, &txvlan_cfg);
+ return ret;
+}
+
+static void
+hns3_store_port_base_vlan_info(struct hns3_adapter *hns, uint16_t pvid, int on)
+{
+ struct hns3_pf *pf = &hns->pf;
+
+ pf->port_base_vlan_cfg.state = on ?
+ HNS3_PORT_BASE_VLAN_ENABLE : HNS3_PORT_BASE_VLAN_DISABLE;
+
+ pf->port_base_vlan_cfg.pvid = pvid;
+}
+
+static void
+hns3_rm_all_vlan_table(struct hns3_adapter *hns, bool is_del_list)
+{
+ struct hns3_user_vlan_table *vlan_entry;
+ struct hns3_pf *pf = &hns->pf;
+
+ LIST_FOREACH(vlan_entry, &pf->vlan_list, next) {
+ if (vlan_entry->hd_tbl_status)
+ hns3_set_port_vlan_filter(hns, vlan_entry->vlan_id, 0);
+
+ vlan_entry->hd_tbl_status = false;
+ }
+
+ if (is_del_list) {
+ vlan_entry = LIST_FIRST(&pf->vlan_list);
+ while (vlan_entry) {
+ LIST_REMOVE(vlan_entry, next);
+ rte_free(vlan_entry);
+ vlan_entry = LIST_FIRST(&pf->vlan_list);
+ }
+ }
+}
+
+static void
+hns3_add_all_vlan_table(struct hns3_adapter *hns)
+{
+ struct hns3_user_vlan_table *vlan_entry;
+ struct hns3_pf *pf = &hns->pf;
+
+ LIST_FOREACH(vlan_entry, &pf->vlan_list, next) {
+ if (!vlan_entry->hd_tbl_status)
+ hns3_set_port_vlan_filter(hns, vlan_entry->vlan_id, 1);
+
+ vlan_entry->hd_tbl_status = true;
+ }
+}
+
+static int
+hns3_update_vlan_filter_entries(struct hns3_adapter *hns,
+ uint16_t port_base_vlan_state,
+ uint16_t new_pvid, uint16_t old_pvid)
+{
+ struct hns3_pf *pf = &hns->pf;
+ struct hns3_hw *hw = &hns->hw;
+ int ret = 0;
+
+ if (port_base_vlan_state == HNS3_PORT_BASE_VLAN_ENABLE) {
+ if (old_pvid != HNS3_INVLID_PVID && old_pvid != 0) {
+ ret = hns3_set_port_vlan_filter(hns, old_pvid, 0);
+ if (ret) {
+ hns3_err(hw,
+ "Failed to clear clear old pvid filter, ret =%d",
+ ret);
+ return ret;
+ }
+ }
+
+ hns3_rm_all_vlan_table(hns, false);
+ return hns3_set_port_vlan_filter(hns, new_pvid, 1);
+ }
+
+ if (new_pvid != 0) {
+ ret = hns3_set_port_vlan_filter(hns, new_pvid, 0);
+ if (ret) {
+ hns3_err(hw, "Failed to set port vlan filter, ret =%d",
+ ret);
+ return ret;
+ }
+ }
+
+ if (new_pvid == pf->port_base_vlan_cfg.pvid)
+ hns3_add_all_vlan_table(hns);
+
+ return ret;
+}
+
+static int
+hns3_en_rx_strip_all(struct hns3_adapter *hns, int on)
+{
+ struct hns3_rx_vtag_cfg rx_vlan_cfg;
+ struct hns3_hw *hw = &hns->hw;
+ bool rx_strip_en;
+ int ret;
+
+ rx_strip_en = on ? true : false;
+ rx_vlan_cfg.strip_tag1_en = rx_strip_en;
+ rx_vlan_cfg.strip_tag2_en = rx_strip_en;
+ rx_vlan_cfg.vlan1_vlan_prionly = false;
+ rx_vlan_cfg.vlan2_vlan_prionly = false;
+ rx_vlan_cfg.rx_vlan_offload_en = rx_strip_en;
+
+ ret = hns3_set_vlan_rx_offload_cfg(hns, &rx_vlan_cfg);
+ if (ret) {
+ hns3_err(hw, "enable strip rx failed, ret =%d", ret);
+ return ret;
+ }
+
+ hns3_update_rx_offload_cfg(hns, &rx_vlan_cfg);
+ return ret;
+}
+
+static int
+hns3_vlan_pvid_configure(struct hns3_adapter *hns, uint16_t pvid, int on)
+{
+ struct hns3_pf *pf = &hns->pf;
+ struct hns3_hw *hw = &hns->hw;
+ uint16_t port_base_vlan_state;
+ uint16_t old_pvid;
+ int ret;
+
+ if (on == 0 && pvid != pf->port_base_vlan_cfg.pvid) {
+ if (pf->port_base_vlan_cfg.pvid != HNS3_INVLID_PVID)
+ hns3_warn(hw, "Invalid operation! As current pvid set "
+ "is %u, disable pvid %u is invalid",
+ pf->port_base_vlan_cfg.pvid, pvid);
+ return 0;
+ }
+
+ port_base_vlan_state = on ? HNS3_PORT_BASE_VLAN_ENABLE :
+ HNS3_PORT_BASE_VLAN_DISABLE;
+ ret = hns3_vlan_txvlan_cfg(hns, port_base_vlan_state, pvid);
+ if (ret) {
+ hns3_err(hw, "Failed to config tx vlan, ret =%d", ret);
+ return ret;
+ }
+
+ ret = hns3_en_rx_strip_all(hns, on);
+ if (ret) {
+ hns3_err(hw, "Failed to config rx vlan strip, ret =%d", ret);
+ return ret;
+ }
+
+ if (pvid == HNS3_INVLID_PVID)
+ goto out;
+ old_pvid = pf->port_base_vlan_cfg.pvid;
+ ret = hns3_update_vlan_filter_entries(hns, port_base_vlan_state, pvid,
+ old_pvid);
+ if (ret) {
+ hns3_err(hw, "Failed to update vlan filter entries, ret =%d",
+ ret);
+ return ret;
+ }
+
+out:
+ hns3_store_port_base_vlan_info(hns, pvid, on);
+ return ret;
+}
+
+static int
+hns3_vlan_pvid_set(struct rte_eth_dev *dev, uint16_t pvid, int on)
+{
+ struct hns3_adapter *hns = dev->data->dev_private;
+ struct hns3_hw *hw = &hns->hw;
+ int ret;
+
+ rte_spinlock_lock(&hw->lock);
+ ret = hns3_vlan_pvid_configure(hns, pvid, on);
+ rte_spinlock_unlock(&hw->lock);
+ return ret;
+}
+
+static void
+init_port_base_vlan_info(struct hns3_hw *hw)
+{
+ struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
+ struct hns3_pf *pf = &hns->pf;
+
+ pf->port_base_vlan_cfg.state = HNS3_PORT_BASE_VLAN_DISABLE;
+ pf->port_base_vlan_cfg.pvid = HNS3_INVLID_PVID;
+}
+
+static int
+hns3_default_vlan_config(struct hns3_adapter *hns)
+{
+ struct hns3_hw *hw = &hns->hw;
+ int ret;
+
+ ret = hns3_set_port_vlan_filter(hns, 0, 1);
+ if (ret)
+ hns3_err(hw, "default vlan 0 config failed, ret =%d", ret);
+ return ret;
+}
+
+static int
+hns3_init_vlan_config(struct hns3_adapter *hns)
+{
+ struct hns3_hw *hw = &hns->hw;
+ int ret;
+
+ /*
+ * This function can be called in the initialization and reset process,
+ * when in reset process, it means that hardware had been reseted
+ * successfully and we need to restore the hardware configuration to
+ * ensure that the hardware configuration remains unchanged before and
+ * after reset.
+ */
+ if (rte_atomic16_read(&hw->reset.resetting) == 0)
+ init_port_base_vlan_info(hw);
+
+ ret = hns3_enable_vlan_filter(hns, true);
+ if (ret) {
+ hns3_err(hw, "vlan init fail in pf, ret =%d", ret);
+ return ret;
+ }
+
+ ret = hns3_vlan_tpid_configure(hns, ETH_VLAN_TYPE_INNER,
+ RTE_ETHER_TYPE_VLAN);
+ if (ret) {
+ hns3_err(hw, "tpid set fail in pf, ret =%d", ret);
+ return ret;
+ }
+
+ /*
+ * When in the reinit dev stage of the reset process, the following
+ * vlan-related configurations may differ from those at initialization,
+ * we will restore configurations to hardware in hns3_restore_vlan_table
+ * and hns3_restore_vlan_conf later.
+ */
+ if (rte_atomic16_read(&hw->reset.resetting) == 0) {
+ ret = hns3_vlan_pvid_configure(hns, HNS3_INVLID_PVID, 0);
+ if (ret) {
+ hns3_err(hw, "pvid set fail in pf, ret =%d", ret);
+ return ret;
+ }
+
+ ret = hns3_en_hw_strip_rxvtag(hns, false);
+ if (ret) {
+ hns3_err(hw, "rx strip configure fail in pf, ret =%d",
+ ret);
+ return ret;
+ }
+ }
+
+ return hns3_default_vlan_config(hns);
+}
+
static int
hns3_config_tso(struct hns3_hw *hw, unsigned int tso_mss_min,
unsigned int tso_mss_max)
@@ -2505,6 +3196,12 @@ hns3_init_hardware(struct hns3_adapter *hns)
goto err_mac_init;
}
+ ret = hns3_init_vlan_config(hns);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Failed to init vlan: %d", ret);
+ goto err_mac_init;
+ }
+
ret = hns3_dcb_init(hw);
if (ret) {
PMD_INIT_LOG(ERR, "Failed to init dcb: %d", ret);
@@ -2838,6 +3535,10 @@ static const struct eth_dev_ops hns3_eth_dev_ops = {
.reta_update = hns3_dev_rss_reta_update,
.reta_query = hns3_dev_rss_reta_query,
.filter_ctrl = hns3_dev_filter_ctrl,
+ .vlan_filter_set = hns3_vlan_filter_set,
+ .vlan_tpid_set = hns3_vlan_tpid_set,
+ .vlan_offload_set = hns3_vlan_offload_set,
+ .vlan_pvid_set = hns3_vlan_pvid_set,
.get_dcb_info = hns3_get_dcb_info,
};
--
2.7.4
next prev parent reply other threads:[~2019-09-26 14:07 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-26 14:01 [dpdk-dev] [PATCH v3 00/22] add hns3 ethernet " Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 01/22] net/hns3: add build and doc infrastructure Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 02/22] net/hns3: add hardware registers definition Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 03/22] net/hns3: add some definitions for data structure and macro Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 04/22] net/hns3: register hns3 PMD driver and add the log interface definition Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 05/22] net/hns3: add support for cmd of hns3 PMD driver Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 06/22] net/hns3: add the initialization " Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 07/22] net/hns3: add support for MAC address related operations Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 08/22] net/hns3: add support for some misc operations Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 09/22] net/hns3: add support for link_update operation Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 10/22] net/hns3: add support for flow directory of hns3 PMD driver Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 11/22] net/hns3: add support for RSS " Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 12/22] net/hns3: add support for flow control " Wei Hu (Xavier)
2019-09-26 14:01 ` Wei Hu (Xavier) [this message]
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 14/22] net/hns3: add support for mailbox " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 15/22] net/hns3: add support for hns3 VF " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 16/22] net/hns3: add RX/TX package burst and queue related operation Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 17/22] net/hns3: add start stop configure promiscuous ops Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 18/22] net/hns3: add dump register ops for hns3 PMD driver Wei Hu (Xavier)
2019-09-27 18:31 ` Ferruh Yigit
2019-09-29 12:09 ` Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 19/22] net/hns3: add abnormal interrupt process " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 20/22] net/hns3: add stats related ops " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 21/22] net/hns3: add reset related process " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 22/22] net/hns3: add multiple process support " Wei Hu (Xavier)
2019-09-27 6:52 ` [dpdk-dev] [PATCH v3 00/22] add hns3 ethernet " Wei Hu (Xavier)
2019-09-27 8:47 ` Ferruh Yigit
2019-09-27 19:16 ` Jeremy Plsek
2019-09-27 18:30 ` Ferruh Yigit
2019-09-29 12:12 ` Wei Hu (Xavier)
2019-09-30 8:52 ` Ferruh Yigit
2019-10-11 1:30 ` Wei Hu (Xavier)
2019-10-10 17:10 ` Ferruh Yigit
2019-10-11 1:39 ` Wei Hu (Xavier)
2019-10-11 2:40 ` Wei Hu (Xavier)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1569506528-60464-14-git-send-email-xavier.huwei@huawei.com \
--to=xavier.huwei@huawei.com \
--cc=dev@dpdk.org \
--cc=forest.zhouchang@huawei.com \
--cc=linuxarm@huawei.com \
--cc=xavier.huwei@tom.com \
--cc=xavier_huwei@163.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).