From: "Wei Hu (Xavier)" <xavier.huwei@huawei.com>
To: <dev@dpdk.org>
Cc: <linuxarm@huawei.com>, <xavier_huwei@163.com>,
<xavier.huwei@tom.com>, <forest.zhouchang@huawei.com>
Subject: [dpdk-dev] [PATCH v3 14/22] net/hns3: add support for mailbox of hns3 PMD driver
Date: Thu, 26 Sep 2019 22:02:00 +0800 [thread overview]
Message-ID: <1569506528-60464-15-git-send-email-xavier.huwei@huawei.com> (raw)
In-Reply-To: <1569506528-60464-1-git-send-email-xavier.huwei@huawei.com>
This patch adds support for mailbox of hns3 PMD driver, mailbox is
used for communication between PF and VF driver.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
---
v1 -> v2:
Address Ferruh Yigit's comments as follows:
https://inbox.dpdk.org/dev/c336a8a2-af82-8779-cfea-0629716b2f4b@intel.com
---
drivers/net/hns3/Makefile | 1 +
drivers/net/hns3/hns3_cmd.c | 3 +
drivers/net/hns3/hns3_ethdev.h | 4 +
drivers/net/hns3/hns3_mbx.c | 337 +++++++++++++++++++++++++++++++++++++++++
drivers/net/hns3/hns3_mbx.h | 136 +++++++++++++++++
drivers/net/hns3/meson.build | 1 +
6 files changed, 482 insertions(+)
create mode 100644 drivers/net/hns3/hns3_mbx.c
create mode 100644 drivers/net/hns3/hns3_mbx.h
diff --git a/drivers/net/hns3/Makefile b/drivers/net/hns3/Makefile
index b4e2d4f..fc39279 100644
--- a/drivers/net/hns3/Makefile
+++ b/drivers/net/hns3/Makefile
@@ -24,6 +24,7 @@ LIBABIVER := 1
#
SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_ethdev.c
SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_cmd.c
+SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_mbx.c
SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_rss.c
SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_flow.c
SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_fdir.c
diff --git a/drivers/net/hns3/hns3_cmd.c b/drivers/net/hns3/hns3_cmd.c
index 853b9fd..706b910 100644
--- a/drivers/net/hns3/hns3_cmd.c
+++ b/drivers/net/hns3/hns3_cmd.c
@@ -476,6 +476,9 @@ hns3_cmd_init(struct hns3_hw *hw)
hw->cmq.csq.next_to_use = 0;
hw->cmq.crq.next_to_clean = 0;
hw->cmq.crq.next_to_use = 0;
+ hw->mbx_resp.head = 0;
+ hw->mbx_resp.tail = 0;
+ hw->mbx_resp.lost = 0;
hns3_cmd_init_regs(hw);
rte_spinlock_unlock(&hw->cmq.crq.lock);
diff --git a/drivers/net/hns3/hns3_ethdev.h b/drivers/net/hns3/hns3_ethdev.h
index 87e3bbc..2a79e6e 100644
--- a/drivers/net/hns3/hns3_ethdev.h
+++ b/drivers/net/hns3/hns3_ethdev.h
@@ -9,6 +9,7 @@
#include <rte_alarm.h>
#include "hns3_cmd.h"
+#include "hns3_mbx.h"
#include "hns3_rss.h"
#include "hns3_fdir.h"
@@ -332,6 +333,9 @@ struct hns3_hw {
struct rte_eth_dev_data *data;
void *io_base;
struct hns3_cmq cmq;
+ struct hns3_mbx_resp_status mbx_resp; /* mailbox response */
+ struct hns3_mbx_arq_ring arq; /* mailbox async rx queue */
+ pthread_t irq_thread_id;
struct hns3_mac mac;
unsigned int secondary_cnt; /* Number of secondary processes init'd. */
uint32_t fw_version;
diff --git a/drivers/net/hns3/hns3_mbx.c b/drivers/net/hns3/hns3_mbx.c
new file mode 100644
index 0000000..200eb77
--- /dev/null
+++ b/drivers/net/hns3/hns3_mbx.c
@@ -0,0 +1,337 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2019 Hisilicon Limited.
+ */
+
+#include <errno.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+#include <unistd.h>
+#include <rte_byteorder.h>
+#include <rte_common.h>
+#include <rte_cycles.h>
+#include <rte_dev.h>
+#include <rte_ethdev_driver.h>
+#include <rte_io.h>
+#include <rte_spinlock.h>
+#include <rte_pci.h>
+#include <rte_bus_pci.h>
+
+#include "hns3_ethdev.h"
+#include "hns3_regs.h"
+#include "hns3_logs.h"
+
+#define HNS3_REG_MSG_DATA_OFFSET 4
+#define HNS3_CMD_CODE_OFFSET 2
+
+static const struct errno_respcode_map err_code_map[] = {
+ {0, 0},
+ {1, -EPERM},
+ {2, -ENOENT},
+ {5, -EIO},
+ {11, -EAGAIN},
+ {12, -ENOMEM},
+ {16, -EBUSY},
+ {22, -EINVAL},
+ {28, -ENOSPC},
+ {95, -EOPNOTSUPP},
+};
+
+static int
+hns3_resp_to_errno(uint16_t resp_code)
+{
+ uint32_t i, num;
+
+ num = sizeof(err_code_map) / sizeof(struct errno_respcode_map);
+ for (i = 0; i < num; i++) {
+ if (err_code_map[i].resp_code == resp_code)
+ return err_code_map[i].err_no;
+ }
+
+ return -EIO;
+}
+
+static void
+hns3_poll_all_sync_msg(void)
+{
+ struct rte_eth_dev *eth_dev;
+ struct hns3_adapter *adapter;
+ const char *name;
+ uint16_t port_id;
+
+ RTE_ETH_FOREACH_DEV(port_id) {
+ eth_dev = &rte_eth_devices[port_id];
+ name = eth_dev->device->driver->name;
+ if (strcmp(name, "net_hns3") && strcmp(name, "net_hns3_vf"))
+ continue;
+ adapter = eth_dev->data->dev_private;
+ if (!adapter || adapter->hw.adapter_state == HNS3_NIC_CLOSED)
+ continue;
+ /* Synchronous msg, the mbx_resp.req_msg_data is non-zero */
+ if (adapter->hw.mbx_resp.req_msg_data)
+ hns3_dev_handle_mbx_msg(&adapter->hw);
+ }
+}
+
+static int
+hns3_get_mbx_resp(struct hns3_hw *hw, uint16_t code0, uint16_t code1,
+ uint8_t *resp_data, uint16_t resp_len)
+{
+#define HNS3_MAX_RETRY_MS 500
+ struct hns3_mbx_resp_status *mbx_resp;
+ bool in_irq = false;
+ uint64_t now;
+ uint64_t end;
+
+ if (resp_len > HNS3_MBX_MAX_RESP_DATA_SIZE) {
+ hns3_err(hw, "VF mbx response len(=%d) exceeds maximum(=%d)",
+ resp_len, HNS3_MBX_MAX_RESP_DATA_SIZE);
+ return -EINVAL;
+ }
+
+ now = get_timeofday_ms();
+ end = now + HNS3_MAX_RETRY_MS;
+ while ((hw->mbx_resp.head != hw->mbx_resp.tail + hw->mbx_resp.lost) &&
+ (now < end)) {
+ /*
+ * The mbox response is running on the interrupt thread.
+ * Sending mbox in the interrupt thread cannot wait for the
+ * response, so polling the mbox response on the irq thread.
+ */
+ if (pthread_equal(hw->irq_thread_id, pthread_self())) {
+ in_irq = true;
+ hns3_poll_all_sync_msg();
+ } else {
+ rte_delay_ms(HNS3_POLL_RESPONE_MS);
+ }
+ now = get_timeofday_ms();
+ }
+ hw->mbx_resp.req_msg_data = 0;
+ if (now >= end) {
+ hw->mbx_resp.lost++;
+ hns3_err(hw,
+ "VF could not get mbx(%d,%d) head(%d) tail(%d) lost(%d) from PF in_irq:%d",
+ code0, code1, hw->mbx_resp.head, hw->mbx_resp.tail,
+ hw->mbx_resp.lost, in_irq);
+ return -ETIME;
+ }
+ rte_io_rmb();
+ mbx_resp = &hw->mbx_resp;
+
+ if (mbx_resp->resp_status)
+ return mbx_resp->resp_status;
+
+ if (resp_data)
+ memcpy(resp_data, &mbx_resp->additional_info[0], resp_len);
+
+ return 0;
+}
+
+int
+hns3_send_mbx_msg(struct hns3_hw *hw, uint16_t code, uint16_t subcode,
+ const uint8_t *msg_data, uint8_t msg_len, bool need_resp,
+ uint8_t *resp_data, uint16_t resp_len)
+{
+ struct hns3_mbx_vf_to_pf_cmd *req;
+ struct hns3_cmd_desc desc;
+ int ret;
+
+ req = (struct hns3_mbx_vf_to_pf_cmd *)desc.data;
+
+ /* first two bytes are reserved for code & subcode */
+ if (msg_len > (HNS3_MBX_MAX_MSG_SIZE - HNS3_CMD_CODE_OFFSET)) {
+ hns3_err(hw,
+ "VF send mbx msg fail, msg len %d exceeds max payload len %d",
+ msg_len, HNS3_MBX_MAX_MSG_SIZE - HNS3_CMD_CODE_OFFSET);
+ return -EINVAL;
+ }
+
+ hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_MBX_VF_TO_PF, false);
+ req->msg[0] = code;
+ req->msg[1] = subcode;
+ if (msg_data)
+ memcpy(&req->msg[HNS3_CMD_CODE_OFFSET], msg_data, msg_len);
+
+ /* synchronous send */
+ if (need_resp) {
+ req->mbx_need_resp |= HNS3_MBX_NEED_RESP_BIT;
+ rte_spinlock_lock(&hw->mbx_resp.lock);
+ hw->mbx_resp.req_msg_data = (uint32_t)code << 16 | subcode;
+ hw->mbx_resp.head++;
+ ret = hns3_cmd_send(hw, &desc, 1);
+ if (ret) {
+ rte_spinlock_unlock(&hw->mbx_resp.lock);
+ hns3_err(hw, "VF failed(=%d) to send mbx message to PF",
+ ret);
+ return ret;
+ }
+
+ ret = hns3_get_mbx_resp(hw, code, subcode, resp_data, resp_len);
+ rte_spinlock_unlock(&hw->mbx_resp.lock);
+ } else {
+ /* asynchronous send */
+ ret = hns3_cmd_send(hw, &desc, 1);
+ if (ret) {
+ hns3_err(hw, "VF failed(=%d) to send mbx message to PF",
+ ret);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static bool
+hns3_cmd_crq_empty(struct hns3_hw *hw)
+{
+ uint32_t tail = hns3_read_dev(hw, HNS3_CMDQ_RX_TAIL_REG);
+
+ return tail == hw->cmq.crq.next_to_use;
+}
+
+static void
+hns3_mbx_handler(struct hns3_hw *hw)
+{
+ struct hns3_mac *mac = &hw->mac;
+ enum hns3_reset_level reset_level;
+ uint16_t *msg_q;
+ uint32_t tail;
+
+ tail = hw->arq.tail;
+
+ /* process all the async queue messages */
+ while (tail != hw->arq.head) {
+ msg_q = hw->arq.msg_q[hw->arq.head];
+
+ switch (msg_q[0]) {
+ case HNS3_MBX_LINK_STAT_CHANGE:
+ memcpy(&mac->link_speed, &msg_q[2],
+ sizeof(mac->link_speed));
+ mac->link_status = rte_le_to_cpu_16(msg_q[1]);
+ mac->link_duplex = (uint8_t)rte_le_to_cpu_16(msg_q[4]);
+ break;
+ case HNS3_MBX_ASSERTING_RESET:
+ /* PF has asserted reset hence VF should go in pending
+ * state and poll for the hardware reset status till it
+ * has been completely reset. After this stack should
+ * eventually be re-initialized.
+ */
+ reset_level = rte_le_to_cpu_16(msg_q[1]);
+ hns3_atomic_set_bit(reset_level, &hw->reset.pending);
+
+ hns3_warn(hw, "PF inform reset level %d", reset_level);
+ hw->reset.stats.request_cnt++;
+ break;
+ default:
+ hns3_err(hw, "Fetched unsupported(%d) message from arq",
+ msg_q[0]);
+ break;
+ }
+
+ hns3_mbx_head_ptr_move_arq(hw->arq);
+ msg_q = hw->arq.msg_q[hw->arq.head];
+ }
+}
+
+/*
+ * Case1: receive response after timeout, req_msg_data
+ * is 0, not equal resp_msg, do lost--
+ * Case2: receive last response during new send_mbx_msg,
+ * req_msg_data is different with resp_msg, let
+ * lost--, continue to wait for response.
+ */
+static void
+hns3_update_resp_position(struct hns3_hw *hw, uint32_t resp_msg)
+{
+ struct hns3_mbx_resp_status *resp = &hw->mbx_resp;
+ uint32_t tail = resp->tail + 1;
+
+ if (tail > resp->head)
+ tail = resp->head;
+ if (resp->req_msg_data != resp_msg) {
+ if (resp->lost)
+ resp->lost--;
+ hns3_warn(hw, "Received a mismatched response req_msg(%x) "
+ "resp_msg(%x) head(%d) tail(%d) lost(%d)",
+ resp->req_msg_data, resp_msg, resp->head, tail,
+ resp->lost);
+ } else if (tail + resp->lost > resp->head) {
+ resp->lost--;
+ hns3_warn(hw, "Received a new response again resp_msg(%x) "
+ "head(%d) tail(%d) lost(%d)", resp_msg,
+ resp->head, tail, resp->lost);
+ }
+ rte_io_wmb();
+ resp->tail = tail;
+}
+
+void
+hns3_dev_handle_mbx_msg(struct hns3_hw *hw)
+{
+ struct hns3_mbx_resp_status *resp = &hw->mbx_resp;
+ struct hns3_cmq_ring *crq = &hw->cmq.crq;
+ struct hns3_mbx_pf_to_vf_cmd *req;
+ struct hns3_cmd_desc *desc;
+ uint32_t msg_data;
+ uint16_t *msg_q;
+ uint16_t flag;
+ uint8_t *temp;
+ int i;
+
+ while (!hns3_cmd_crq_empty(hw)) {
+ if (rte_atomic16_read(&hw->reset.disable_cmd))
+ return;
+
+ desc = &crq->desc[crq->next_to_use];
+ req = (struct hns3_mbx_pf_to_vf_cmd *)desc->data;
+
+ flag = rte_le_to_cpu_16(crq->desc[crq->next_to_use].flag);
+ if (unlikely(!hns3_get_bit(flag, HNS3_CMDQ_RX_OUTVLD_B))) {
+ hns3_warn(hw,
+ "dropped invalid mailbox message, code = %d",
+ req->msg[0]);
+
+ /* dropping/not processing this invalid message */
+ crq->desc[crq->next_to_use].flag = 0;
+ hns3_mbx_ring_ptr_move_crq(crq);
+ continue;
+ }
+
+ switch (req->msg[0]) {
+ case HNS3_MBX_PF_VF_RESP:
+ resp->resp_status = hns3_resp_to_errno(req->msg[3]);
+
+ temp = (uint8_t *)&req->msg[4];
+ for (i = 0; i < HNS3_MBX_MAX_RESP_DATA_SIZE &&
+ i < HNS3_REG_MSG_DATA_OFFSET; i++) {
+ resp->additional_info[i] = *temp;
+ temp++;
+ }
+ msg_data = (uint32_t)req->msg[1] << 16 | req->msg[2];
+ hns3_update_resp_position(hw, msg_data);
+ break;
+ case HNS3_MBX_LINK_STAT_CHANGE:
+ case HNS3_MBX_ASSERTING_RESET:
+ msg_q = hw->arq.msg_q[hw->arq.tail];
+ memcpy(&msg_q[0], req->msg,
+ HNS3_MBX_MAX_ARQ_MSG_SIZE * sizeof(uint16_t));
+ hns3_mbx_tail_ptr_move_arq(hw->arq);
+
+ hns3_mbx_handler(hw);
+ break;
+ default:
+ hns3_err(hw,
+ "VF received unsupported(%d) mbx msg from PF",
+ req->msg[0]);
+ break;
+ }
+
+ crq->desc[crq->next_to_use].flag = 0;
+ hns3_mbx_ring_ptr_move_crq(crq);
+ }
+
+ /* Write back CMDQ_RQ header pointer, IMP need this pointer */
+ hns3_write_dev(hw, HNS3_CMDQ_RX_HEAD_REG, crq->next_to_use);
+}
diff --git a/drivers/net/hns3/hns3_mbx.h b/drivers/net/hns3/hns3_mbx.h
new file mode 100644
index 0000000..ee6e823
--- /dev/null
+++ b/drivers/net/hns3/hns3_mbx.h
@@ -0,0 +1,136 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2019 Hisilicon Limited.
+ */
+
+#ifndef _HNS3_MBX_H_
+#define _HNS3_MBX_H_
+
+#define HNS3_MBX_VF_MSG_DATA_NUM 16
+
+enum HNS3_MBX_OPCODE {
+ HNS3_MBX_RESET = 0x01, /* (VF -> PF) assert reset */
+ HNS3_MBX_ASSERTING_RESET, /* (PF -> VF) PF is asserting reset */
+ HNS3_MBX_SET_UNICAST, /* (VF -> PF) set UC addr */
+ HNS3_MBX_SET_MULTICAST, /* (VF -> PF) set MC addr */
+ HNS3_MBX_SET_VLAN, /* (VF -> PF) set VLAN */
+ HNS3_MBX_MAP_RING_TO_VECTOR, /* (VF -> PF) map ring-to-vector */
+ HNS3_MBX_UNMAP_RING_TO_VECTOR, /* (VF -> PF) unamp ring-to-vector */
+ HNS3_MBX_SET_PROMISC_MODE, /* (VF -> PF) set promiscuous mode */
+ HNS3_MBX_SET_MACVLAN, /* (VF -> PF) set unicast filter */
+ HNS3_MBX_API_NEGOTIATE, /* (VF -> PF) negotiate API version */
+ HNS3_MBX_GET_QINFO, /* (VF -> PF) get queue config */
+ HNS3_MBX_GET_QDEPTH, /* (VF -> PF) get queue depth */
+ HNS3_MBX_GET_TCINFO, /* (VF -> PF) get TC config */
+ HNS3_MBX_GET_RETA, /* (VF -> PF) get RETA */
+ HNS3_MBX_GET_RSS_KEY, /* (VF -> PF) get RSS key */
+ HNS3_MBX_GET_MAC_ADDR, /* (VF -> PF) get MAC addr */
+ HNS3_MBX_PF_VF_RESP, /* (PF -> VF) generate respone to VF */
+ HNS3_MBX_GET_BDNUM, /* (VF -> PF) get BD num */
+ HNS3_MBX_GET_BUFSIZE, /* (VF -> PF) get buffer size */
+ HNS3_MBX_GET_STREAMID, /* (VF -> PF) get stream id */
+ HNS3_MBX_SET_AESTART, /* (VF -> PF) start ae */
+ HNS3_MBX_SET_TSOSTATS, /* (VF -> PF) get tso stats */
+ HNS3_MBX_LINK_STAT_CHANGE, /* (PF -> VF) link status has changed */
+ HNS3_MBX_GET_BASE_CONFIG, /* (VF -> PF) get config */
+ HNS3_MBX_BIND_FUNC_QUEUE, /* (VF -> PF) bind function and queue */
+ HNS3_MBX_GET_LINK_STATUS, /* (VF -> PF) get link status */
+ HNS3_MBX_QUEUE_RESET, /* (VF -> PF) reset queue */
+ HNS3_MBX_KEEP_ALIVE, /* (VF -> PF) send keep alive cmd */
+ HNS3_MBX_SET_ALIVE, /* (VF -> PF) set alive state */
+ HNS3_MBX_SET_MTU, /* (VF -> PF) set mtu */
+ HNS3_MBX_GET_QID_IN_PF, /* (VF -> PF) get queue id in pf */
+};
+
+/* below are per-VF mac-vlan subcodes */
+enum hns3_mbx_mac_vlan_subcode {
+ HNS3_MBX_MAC_VLAN_UC_MODIFY = 0, /* modify UC mac addr */
+ HNS3_MBX_MAC_VLAN_UC_ADD, /* add a new UC mac addr */
+ HNS3_MBX_MAC_VLAN_UC_REMOVE, /* remove a new UC mac addr */
+ HNS3_MBX_MAC_VLAN_MC_MODIFY, /* modify MC mac addr */
+ HNS3_MBX_MAC_VLAN_MC_ADD, /* add new MC mac addr */
+ HNS3_MBX_MAC_VLAN_MC_REMOVE, /* remove MC mac addr */
+};
+
+/* below are per-VF vlan cfg subcodes */
+enum hns3_mbx_vlan_cfg_subcode {
+ HNS3_MBX_VLAN_FILTER = 0, /* set vlan filter */
+ HNS3_MBX_VLAN_TX_OFF_CFG, /* set tx side vlan offload */
+ HNS3_MBX_VLAN_RX_OFF_CFG, /* set rx side vlan offload */
+};
+
+#define HNS3_MBX_MAX_MSG_SIZE 16
+#define HNS3_MBX_MAX_RESP_DATA_SIZE 8
+#define HNS3_MBX_RING_MAP_BASIC_MSG_NUM 3
+#define HNS3_MBX_RING_NODE_VARIABLE_NUM 3
+
+struct hns3_mbx_resp_status {
+ rte_spinlock_t lock; /* protects against contending sync cmd resp */
+ uint32_t req_msg_data;
+ uint32_t head;
+ uint32_t tail;
+ uint32_t lost;
+ int resp_status;
+ uint8_t additional_info[HNS3_MBX_MAX_RESP_DATA_SIZE];
+};
+
+struct errno_respcode_map {
+ uint16_t resp_code;
+ int err_no;
+};
+
+#define HNS3_MBX_NEED_RESP_BIT BIT(0)
+
+struct hns3_mbx_vf_to_pf_cmd {
+ uint8_t rsv;
+ uint8_t mbx_src_vfid; /* Auto filled by IMP */
+ uint8_t mbx_need_resp;
+ uint8_t rsv1;
+ uint8_t msg_len;
+ uint8_t rsv2[3];
+ uint8_t msg[HNS3_MBX_MAX_MSG_SIZE];
+};
+
+struct hns3_mbx_pf_to_vf_cmd {
+ uint8_t dest_vfid;
+ uint8_t rsv[3];
+ uint8_t msg_len;
+ uint8_t rsv1[3];
+ uint16_t msg[8];
+};
+
+struct hns3_vf_rst_cmd {
+ uint8_t dest_vfid;
+ uint8_t vf_rst;
+ uint8_t rsv[22];
+};
+
+struct hns3_pf_rst_done_cmd {
+ uint8_t pf_rst_done;
+ uint8_t rsv[23];
+};
+
+#define HNS3_PF_RESET_DONE_BIT BIT(0)
+
+/* used by VF to store the received Async responses from PF */
+struct hns3_mbx_arq_ring {
+#define HNS3_MBX_MAX_ARQ_MSG_SIZE 8
+#define HNS3_MBX_MAX_ARQ_MSG_NUM 1024
+ uint32_t head;
+ uint32_t tail;
+ uint32_t count;
+ uint16_t msg_q[HNS3_MBX_MAX_ARQ_MSG_NUM][HNS3_MBX_MAX_ARQ_MSG_SIZE];
+};
+
+#define hns3_mbx_ring_ptr_move_crq(crq) \
+ ((crq)->next_to_use = ((crq)->next_to_use + 1) % (crq)->desc_num)
+#define hns3_mbx_tail_ptr_move_arq(arq) \
+ ((arq).tail = ((arq).tail + 1) % HNS3_MBX_MAX_ARQ_MSG_SIZE)
+#define hns3_mbx_head_ptr_move_arq(arq) \
+ ((arq).head = ((arq).head + 1) % HNS3_MBX_MAX_ARQ_MSG_SIZE)
+
+struct hns3_hw;
+void hns3_dev_handle_mbx_msg(struct hns3_hw *hw);
+int hns3_send_mbx_msg(struct hns3_hw *hw, uint16_t code, uint16_t subcode,
+ const uint8_t *msg_data, uint8_t msg_len, bool need_resp,
+ uint8_t *resp_data, uint16_t resp_len);
+#endif /* _HNS3_MBX_H_ */
diff --git a/drivers/net/hns3/meson.build b/drivers/net/hns3/meson.build
index 86edc56..622f0a7 100644
--- a/drivers/net/hns3/meson.build
+++ b/drivers/net/hns3/meson.build
@@ -18,6 +18,7 @@ sources = files('hns3_cmd.c',
'hns3_ethdev.c',
'hns3_fdir.c',
'hns3_flow.c',
+ 'hns3_mbx.c',
'hns3_rss.c',
)
deps += ['hash']
--
2.7.4
next prev parent reply other threads:[~2019-09-26 14:06 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-26 14:01 [dpdk-dev] [PATCH v3 00/22] add hns3 ethernet " Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 01/22] net/hns3: add build and doc infrastructure Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 02/22] net/hns3: add hardware registers definition Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 03/22] net/hns3: add some definitions for data structure and macro Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 04/22] net/hns3: register hns3 PMD driver and add the log interface definition Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 05/22] net/hns3: add support for cmd of hns3 PMD driver Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 06/22] net/hns3: add the initialization " Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 07/22] net/hns3: add support for MAC address related operations Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 08/22] net/hns3: add support for some misc operations Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 09/22] net/hns3: add support for link_update operation Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 10/22] net/hns3: add support for flow directory of hns3 PMD driver Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 11/22] net/hns3: add support for RSS " Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 12/22] net/hns3: add support for flow control " Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 13/22] net/hns3: add support for vlan " Wei Hu (Xavier)
2019-09-26 14:02 ` Wei Hu (Xavier) [this message]
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 15/22] net/hns3: add support for hns3 VF " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 16/22] net/hns3: add RX/TX package burst and queue related operation Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 17/22] net/hns3: add start stop configure promiscuous ops Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 18/22] net/hns3: add dump register ops for hns3 PMD driver Wei Hu (Xavier)
2019-09-27 18:31 ` Ferruh Yigit
2019-09-29 12:09 ` Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 19/22] net/hns3: add abnormal interrupt process " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 20/22] net/hns3: add stats related ops " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 21/22] net/hns3: add reset related process " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 22/22] net/hns3: add multiple process support " Wei Hu (Xavier)
2019-09-27 6:52 ` [dpdk-dev] [PATCH v3 00/22] add hns3 ethernet " Wei Hu (Xavier)
2019-09-27 8:47 ` Ferruh Yigit
2019-09-27 19:16 ` Jeremy Plsek
2019-09-27 18:30 ` Ferruh Yigit
2019-09-29 12:12 ` Wei Hu (Xavier)
2019-09-30 8:52 ` Ferruh Yigit
2019-10-11 1:30 ` Wei Hu (Xavier)
2019-10-10 17:10 ` Ferruh Yigit
2019-10-11 1:39 ` Wei Hu (Xavier)
2019-10-11 2:40 ` Wei Hu (Xavier)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1569506528-60464-15-git-send-email-xavier.huwei@huawei.com \
--to=xavier.huwei@huawei.com \
--cc=dev@dpdk.org \
--cc=forest.zhouchang@huawei.com \
--cc=linuxarm@huawei.com \
--cc=xavier.huwei@tom.com \
--cc=xavier_huwei@163.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).