From: "Wei Hu (Xavier)" <xavier.huwei@huawei.com>
To: <dev@dpdk.org>
Cc: <linuxarm@huawei.com>, <xavier_huwei@163.com>,
<xavier.huwei@tom.com>, <forest.zhouchang@huawei.com>
Subject: [dpdk-dev] [PATCH v3 18/22] net/hns3: add dump register ops for hns3 PMD driver
Date: Thu, 26 Sep 2019 22:02:04 +0800 [thread overview]
Message-ID: <1569506528-60464-19-git-send-email-xavier.huwei@huawei.com> (raw)
In-Reply-To: <1569506528-60464-1-git-send-email-xavier.huwei@huawei.com>
This patch adds get_reg related function codes for hns3 PMD driver.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
---
drivers/net/hns3/Makefile | 1 +
drivers/net/hns3/hns3_ethdev.c | 1 +
drivers/net/hns3/hns3_ethdev_vf.c | 1 +
drivers/net/hns3/hns3_regs.c | 368 ++++++++++++++++++++++++++++++++++++++
drivers/net/hns3/hns3_regs.h | 1 +
drivers/net/hns3/meson.build | 1 +
6 files changed, 373 insertions(+)
create mode 100644 drivers/net/hns3/hns3_regs.c
diff --git a/drivers/net/hns3/Makefile b/drivers/net/hns3/Makefile
index 1a5c66a..4cc971b 100644
--- a/drivers/net/hns3/Makefile
+++ b/drivers/net/hns3/Makefile
@@ -30,6 +30,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_rxtx.c
SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_rss.c
SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_flow.c
SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_fdir.c
+SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_regs.c
SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_dcb.c
include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index 9a7be4e..4801e2d 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -4050,6 +4050,7 @@ static const struct eth_dev_ops hns3_eth_dev_ops = {
.vlan_tpid_set = hns3_vlan_tpid_set,
.vlan_offload_set = hns3_vlan_offload_set,
.vlan_pvid_set = hns3_vlan_pvid_set,
+ .get_reg = hns3_get_regs,
.get_dcb_info = hns3_get_dcb_info,
.dev_supported_ptypes_get = hns3_dev_supported_ptypes_get,
};
diff --git a/drivers/net/hns3/hns3_ethdev_vf.c b/drivers/net/hns3/hns3_ethdev_vf.c
index 8a0dbb9..64b0f11 100644
--- a/drivers/net/hns3/hns3_ethdev_vf.c
+++ b/drivers/net/hns3/hns3_ethdev_vf.c
@@ -1134,6 +1134,7 @@ static const struct eth_dev_ops hns3vf_eth_dev_ops = {
.filter_ctrl = hns3_dev_filter_ctrl,
.vlan_filter_set = hns3vf_vlan_filter_set,
.vlan_offload_set = hns3vf_vlan_offload_set,
+ .get_reg = hns3_get_regs,
.dev_supported_ptypes_get = hns3_dev_supported_ptypes_get,
};
diff --git a/drivers/net/hns3/hns3_regs.c b/drivers/net/hns3/hns3_regs.c
new file mode 100644
index 0000000..d83eef3
--- /dev/null
+++ b/drivers/net/hns3/hns3_regs.c
@@ -0,0 +1,368 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2019 Hisilicon Limited.
+ */
+
+#include <errno.h>
+#include <stdarg.h>
+#include <stdbool.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <inttypes.h>
+#include <unistd.h>
+#include <rte_bus_pci.h>
+#include <rte_byteorder.h>
+#include <rte_common.h>
+#include <rte_dev.h>
+#include <rte_eal.h>
+#include <rte_ether.h>
+#include <rte_ethdev_driver.h>
+#include <rte_ethdev_pci.h>
+#include <rte_io.h>
+#include <rte_pci.h>
+
+#include "hns3_ethdev.h"
+#include "hns3_logs.h"
+#include "hns3_rxtx.h"
+#include "hns3_regs.h"
+
+#define MAX_SEPARATE_NUM 4
+#define SEPARATOR_VALUE 0xFFFFFFFF
+#define REG_NUM_PER_LINE 4
+#define REG_LEN_PER_LINE (REG_NUM_PER_LINE * sizeof(uint32_t))
+
+static const uint32_t cmdq_reg_addrs[] = {HNS3_CMDQ_TX_ADDR_L_REG,
+ HNS3_CMDQ_TX_ADDR_H_REG,
+ HNS3_CMDQ_TX_DEPTH_REG,
+ HNS3_CMDQ_TX_TAIL_REG,
+ HNS3_CMDQ_TX_HEAD_REG,
+ HNS3_CMDQ_RX_ADDR_L_REG,
+ HNS3_CMDQ_RX_ADDR_H_REG,
+ HNS3_CMDQ_RX_DEPTH_REG,
+ HNS3_CMDQ_RX_TAIL_REG,
+ HNS3_CMDQ_RX_HEAD_REG,
+ HNS3_VECTOR0_CMDQ_SRC_REG,
+ HNS3_CMDQ_INTR_STS_REG,
+ HNS3_CMDQ_INTR_EN_REG,
+ HNS3_CMDQ_INTR_GEN_REG};
+
+static const uint32_t common_reg_addrs[] = {HNS3_MISC_VECTOR_REG_BASE,
+ HNS3_VECTOR0_OTER_EN_REG,
+ HNS3_MISC_RESET_STS_REG,
+ HNS3_VECTOR0_OTHER_INT_STS_REG,
+ HNS3_GLOBAL_RESET_REG,
+ HNS3_FUN_RST_ING,
+ HNS3_GRO_EN_REG};
+
+static const uint32_t common_vf_reg_addrs[] = {HNS3_MISC_VECTOR_REG_BASE,
+ HNS3_FUN_RST_ING,
+ HNS3_GRO_EN_REG};
+
+static const uint32_t ring_reg_addrs[] = {HNS3_RING_RX_BASEADDR_L_REG,
+ HNS3_RING_RX_BASEADDR_H_REG,
+ HNS3_RING_RX_BD_NUM_REG,
+ HNS3_RING_RX_BD_LEN_REG,
+ HNS3_RING_RX_MERGE_EN_REG,
+ HNS3_RING_RX_TAIL_REG,
+ HNS3_RING_RX_HEAD_REG,
+ HNS3_RING_RX_FBDNUM_REG,
+ HNS3_RING_RX_OFFSET_REG,
+ HNS3_RING_RX_FBD_OFFSET_REG,
+ HNS3_RING_RX_STASH_REG,
+ HNS3_RING_RX_BD_ERR_REG,
+ HNS3_RING_TX_BASEADDR_L_REG,
+ HNS3_RING_TX_BASEADDR_H_REG,
+ HNS3_RING_TX_BD_NUM_REG,
+ HNS3_RING_TX_PRIORITY_REG,
+ HNS3_RING_TX_TC_REG,
+ HNS3_RING_TX_MERGE_EN_REG,
+ HNS3_RING_TX_TAIL_REG,
+ HNS3_RING_TX_HEAD_REG,
+ HNS3_RING_TX_FBDNUM_REG,
+ HNS3_RING_TX_OFFSET_REG,
+ HNS3_RING_TX_EBD_NUM_REG,
+ HNS3_RING_TX_EBD_OFFSET_REG,
+ HNS3_RING_TX_BD_ERR_REG,
+ HNS3_RING_EN_REG};
+
+static const uint32_t tqp_intr_reg_addrs[] = {HNS3_TQP_INTR_CTRL_REG,
+ HNS3_TQP_INTR_GL0_REG,
+ HNS3_TQP_INTR_GL1_REG,
+ HNS3_TQP_INTR_GL2_REG,
+ HNS3_TQP_INTR_RL_REG};
+
+static int
+hns3_get_regs_num(struct hns3_hw *hw, uint32_t *regs_num_32_bit,
+ uint32_t *regs_num_64_bit)
+{
+ struct hns3_cmd_desc desc;
+ int ret;
+
+ hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_QUERY_REG_NUM, true);
+ ret = hns3_cmd_send(hw, &desc, 1);
+ if (ret) {
+ hns3_err(hw, "Query register number cmd failed, ret = %d",
+ ret);
+ return ret;
+ }
+
+ *regs_num_32_bit = rte_le_to_cpu_32(desc.data[0]);
+ *regs_num_64_bit = rte_le_to_cpu_32(desc.data[1]);
+
+ return 0;
+}
+
+static int
+hns3_get_regs_length(struct hns3_hw *hw, uint32_t *length)
+{
+ struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
+ int cmdq_lines, common_lines, ring_lines, tqp_intr_lines;
+ uint32_t regs_num_32_bit, regs_num_64_bit;
+ int ret;
+
+ ret = hns3_get_regs_num(hw, ®s_num_32_bit, ®s_num_64_bit);
+ if (ret) {
+ hns3_err(hw, "Get register number failed, ret = %d.",
+ ret);
+ return -ENOTSUP;
+ }
+
+ cmdq_lines = sizeof(cmdq_reg_addrs) / REG_LEN_PER_LINE + 1;
+ if (hns->is_vf)
+ common_lines =
+ sizeof(common_vf_reg_addrs) / REG_LEN_PER_LINE + 1;
+ else
+ common_lines = sizeof(common_reg_addrs) / REG_LEN_PER_LINE + 1;
+ ring_lines = sizeof(ring_reg_addrs) / REG_LEN_PER_LINE + 1;
+ tqp_intr_lines = sizeof(tqp_intr_reg_addrs) / REG_LEN_PER_LINE + 1;
+
+ *length = (cmdq_lines + common_lines + ring_lines * hw->tqps_num +
+ tqp_intr_lines * hw->num_msi) * REG_LEN_PER_LINE +
+ regs_num_32_bit * sizeof(uint32_t) +
+ regs_num_64_bit * sizeof(uint64_t);
+
+ return 0;
+}
+
+static int
+hns3_get_32_bit_regs(struct hns3_hw *hw, uint32_t regs_num, void *data)
+{
+#define HNS3_32_BIT_REG_RTN_DATANUM 8
+#define HNS3_32_BIT_DESC_NODATA_LEN 2
+ struct hns3_cmd_desc *desc;
+ uint32_t *reg_val = data;
+ uint32_t *desc_data;
+ int cmd_num;
+ int i, k, n;
+ int ret;
+
+ if (regs_num == 0)
+ return 0;
+
+ cmd_num = DIV_ROUND_UP(regs_num + HNS3_32_BIT_DESC_NODATA_LEN,
+ HNS3_32_BIT_REG_RTN_DATANUM);
+ desc = rte_zmalloc("hns3-32bit-regs",
+ sizeof(struct hns3_cmd_desc) * cmd_num, 0);
+ if (desc == NULL) {
+ hns3_err(hw, "Failed to allocate %" PRIx64 " bytes needed to "
+ "store 32bit regs",
+ sizeof(struct hns3_cmd_desc) * cmd_num);
+ return -ENOMEM;
+ }
+
+ hns3_cmd_setup_basic_desc(&desc[0], HNS3_OPC_QUERY_32_BIT_REG, true);
+ ret = hns3_cmd_send(hw, desc, cmd_num);
+ if (ret) {
+ hns3_err(hw, "Query 32 bit register cmd failed, ret = %d",
+ ret);
+ rte_free(desc);
+ return ret;
+ }
+
+ for (i = 0; i < cmd_num; i++) {
+ if (i == 0) {
+ desc_data = &desc[i].data[0];
+ n = HNS3_32_BIT_REG_RTN_DATANUM -
+ HNS3_32_BIT_DESC_NODATA_LEN;
+ } else {
+ desc_data = (uint32_t *)(&desc[i]);
+ n = HNS3_32_BIT_REG_RTN_DATANUM;
+ }
+ for (k = 0; k < n; k++) {
+ *reg_val++ = rte_le_to_cpu_32(*desc_data++);
+
+ regs_num--;
+ if (regs_num == 0)
+ break;
+ }
+ }
+
+ rte_free(desc);
+ return 0;
+}
+
+static int
+hns3_get_64_bit_regs(struct hns3_hw *hw, uint32_t regs_num, void *data)
+{
+#define HNS3_64_BIT_REG_RTN_DATANUM 4
+#define HNS3_64_BIT_DESC_NODATA_LEN 1
+ struct hns3_cmd_desc *desc;
+ uint64_t *reg_val = data;
+ uint64_t *desc_data;
+ int cmd_num;
+ int i, k, n;
+ int ret;
+
+ if (regs_num == 0)
+ return 0;
+
+ cmd_num = DIV_ROUND_UP(regs_num + HNS3_64_BIT_DESC_NODATA_LEN,
+ HNS3_64_BIT_REG_RTN_DATANUM);
+ desc = rte_zmalloc("hns3-64bit-regs",
+ sizeof(struct hns3_cmd_desc) * cmd_num, 0);
+ if (desc == NULL) {
+ hns3_err(hw, "Failed to allocate %" PRIx64 " bytes needed to "
+ "store 64bit regs",
+ sizeof(struct hns3_cmd_desc) * cmd_num);
+ return -ENOMEM;
+ }
+
+ hns3_cmd_setup_basic_desc(&desc[0], HNS3_OPC_QUERY_64_BIT_REG, true);
+ ret = hns3_cmd_send(hw, desc, cmd_num);
+ if (ret) {
+ hns3_err(hw, "Query 64 bit register cmd failed, ret = %d",
+ ret);
+ rte_free(desc);
+ return ret;
+ }
+
+ for (i = 0; i < cmd_num; i++) {
+ if (i == 0) {
+ desc_data = (uint64_t *)(&desc[i].data[0]);
+ n = HNS3_64_BIT_REG_RTN_DATANUM -
+ HNS3_64_BIT_DESC_NODATA_LEN;
+ } else {
+ desc_data = (uint64_t *)(&desc[i]);
+ n = HNS3_64_BIT_REG_RTN_DATANUM;
+ }
+ for (k = 0; k < n; k++) {
+ *reg_val++ = rte_le_to_cpu_64(*desc_data++);
+
+ regs_num--;
+ if (!regs_num)
+ break;
+ }
+ }
+
+ rte_free(desc);
+ return 0;
+}
+
+static void
+hns3_direct_access_regs(struct hns3_hw *hw, uint32_t *data)
+{
+ struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
+ uint32_t reg_offset;
+ int separator_num;
+ int reg_um;
+ int i, j;
+
+ /* fetching per-PF registers values from PF PCIe register space */
+ reg_um = sizeof(cmdq_reg_addrs) / sizeof(uint32_t);
+ separator_num = MAX_SEPARATE_NUM - reg_um % REG_NUM_PER_LINE;
+ for (i = 0; i < reg_um; i++)
+ *data++ = hns3_read_dev(hw, cmdq_reg_addrs[i]);
+ for (i = 0; i < separator_num; i++)
+ *data++ = SEPARATOR_VALUE;
+
+ if (hns->is_vf)
+ reg_um = sizeof(common_vf_reg_addrs) / sizeof(uint32_t);
+ else
+ reg_um = sizeof(common_reg_addrs) / sizeof(uint32_t);
+ separator_num = MAX_SEPARATE_NUM - reg_um % REG_NUM_PER_LINE;
+ for (i = 0; i < reg_um; i++)
+ if (hns->is_vf)
+ *data++ = hns3_read_dev(hw, common_vf_reg_addrs[i]);
+ else
+ *data++ = hns3_read_dev(hw, common_reg_addrs[i]);
+ for (i = 0; i < separator_num; i++)
+ *data++ = SEPARATOR_VALUE;
+
+ reg_um = sizeof(ring_reg_addrs) / sizeof(uint32_t);
+ separator_num = MAX_SEPARATE_NUM - reg_um % REG_NUM_PER_LINE;
+ for (j = 0; j < hw->tqps_num; j++) {
+ reg_offset = HNS3_TQP_REG_OFFSET + HNS3_TQP_REG_SIZE * j;
+ for (i = 0; i < reg_um; i++)
+ *data++ = hns3_read_dev(hw,
+ ring_reg_addrs[i] + reg_offset);
+ for (i = 0; i < separator_num; i++)
+ *data++ = SEPARATOR_VALUE;
+ }
+
+ reg_um = sizeof(tqp_intr_reg_addrs) / sizeof(uint32_t);
+ separator_num = MAX_SEPARATE_NUM - reg_um % REG_NUM_PER_LINE;
+ for (j = 0; j < hw->num_msi; j++) {
+ reg_offset = HNS3_TQP_INTR_REG_SIZE * j;
+ for (i = 0; i < reg_um; i++)
+ *data++ = hns3_read_dev(hw,
+ tqp_intr_reg_addrs[i] +
+ reg_offset);
+ for (i = 0; i < separator_num; i++)
+ *data++ = SEPARATOR_VALUE;
+ }
+}
+
+int
+hns3_get_regs(struct rte_eth_dev *eth_dev, struct rte_dev_reg_info *regs)
+{
+ struct hns3_adapter *hns = eth_dev->data->dev_private;
+ struct hns3_hw *hw = &hns->hw;
+ uint32_t regs_num_32_bit;
+ uint32_t regs_num_64_bit;
+ uint32_t length;
+ uint32_t *data;
+ int ret;
+
+ if (regs == NULL) {
+ hns3_err(hw, "the input parameter regs is NULL!");
+ return -EINVAL;
+ }
+
+ ret = hns3_get_regs_length(hw, &length);
+ if (ret)
+ return ret;
+
+ data = regs->data;
+ if (data == NULL) {
+ regs->length = length;
+ regs->width = sizeof(uint32_t);
+ return 0;
+ }
+
+ /* Only full register dump is supported */
+ if (regs->length && regs->length != length)
+ return -ENOTSUP;
+
+ /* fetching per-PF registers values from PF PCIe register space */
+ hns3_direct_access_regs(hw, data);
+
+ ret = hns3_get_regs_num(hw, ®s_num_32_bit, ®s_num_64_bit);
+ if (ret) {
+ hns3_err(hw, "Get register number failed, ret = %d", ret);
+ return ret;
+ }
+
+ /* fetching PF common registers values from firmware */
+ ret = hns3_get_32_bit_regs(hw, regs_num_32_bit, data);
+ if (ret) {
+ hns3_err(hw, "Get 32 bit register failed, ret = %d", ret);
+ return ret;
+ }
+
+ data += regs_num_32_bit;
+ ret = hns3_get_64_bit_regs(hw, regs_num_64_bit, data);
+ if (ret)
+ hns3_err(hw, "Get 64 bit register failed, ret = %d", ret);
+
+ return ret;
+}
diff --git a/drivers/net/hns3/hns3_regs.h b/drivers/net/hns3/hns3_regs.h
index 5a4f315..2f5faaf 100644
--- a/drivers/net/hns3/hns3_regs.h
+++ b/drivers/net/hns3/hns3_regs.h
@@ -95,4 +95,5 @@
#define HNS3_TQP_INTR_REG_SIZE 4
+int hns3_get_regs(struct rte_eth_dev *eth_dev, struct rte_dev_reg_info *regs);
#endif /* _HNS3_REGS_H_ */
diff --git a/drivers/net/hns3/meson.build b/drivers/net/hns3/meson.build
index 1d8b1b1..77d9154 100644
--- a/drivers/net/hns3/meson.build
+++ b/drivers/net/hns3/meson.build
@@ -20,6 +20,7 @@ sources = files('hns3_cmd.c',
'hns3_fdir.c',
'hns3_flow.c',
'hns3_mbx.c',
+ 'hns3_regs.c',
'hns3_rss.c',
'hns3_rxtx.c',
)
--
2.7.4
next prev parent reply other threads:[~2019-09-26 14:09 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-26 14:01 [dpdk-dev] [PATCH v3 00/22] add hns3 ethernet " Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 01/22] net/hns3: add build and doc infrastructure Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 02/22] net/hns3: add hardware registers definition Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 03/22] net/hns3: add some definitions for data structure and macro Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 04/22] net/hns3: register hns3 PMD driver and add the log interface definition Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 05/22] net/hns3: add support for cmd of hns3 PMD driver Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 06/22] net/hns3: add the initialization " Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 07/22] net/hns3: add support for MAC address related operations Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 08/22] net/hns3: add support for some misc operations Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 09/22] net/hns3: add support for link_update operation Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 10/22] net/hns3: add support for flow directory of hns3 PMD driver Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 11/22] net/hns3: add support for RSS " Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 12/22] net/hns3: add support for flow control " Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 13/22] net/hns3: add support for vlan " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 14/22] net/hns3: add support for mailbox " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 15/22] net/hns3: add support for hns3 VF " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 16/22] net/hns3: add RX/TX package burst and queue related operation Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 17/22] net/hns3: add start stop configure promiscuous ops Wei Hu (Xavier)
2019-09-26 14:02 ` Wei Hu (Xavier) [this message]
2019-09-27 18:31 ` [dpdk-dev] [PATCH v3 18/22] net/hns3: add dump register ops for hns3 PMD driver Ferruh Yigit
2019-09-29 12:09 ` Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 19/22] net/hns3: add abnormal interrupt process " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 20/22] net/hns3: add stats related ops " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 21/22] net/hns3: add reset related process " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 22/22] net/hns3: add multiple process support " Wei Hu (Xavier)
2019-09-27 6:52 ` [dpdk-dev] [PATCH v3 00/22] add hns3 ethernet " Wei Hu (Xavier)
2019-09-27 8:47 ` Ferruh Yigit
2019-09-27 19:16 ` Jeremy Plsek
2019-09-27 18:30 ` Ferruh Yigit
2019-09-29 12:12 ` Wei Hu (Xavier)
2019-09-30 8:52 ` Ferruh Yigit
2019-10-11 1:30 ` Wei Hu (Xavier)
2019-10-10 17:10 ` Ferruh Yigit
2019-10-11 1:39 ` Wei Hu (Xavier)
2019-10-11 2:40 ` Wei Hu (Xavier)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1569506528-60464-19-git-send-email-xavier.huwei@huawei.com \
--to=xavier.huwei@huawei.com \
--cc=dev@dpdk.org \
--cc=forest.zhouchang@huawei.com \
--cc=linuxarm@huawei.com \
--cc=xavier.huwei@tom.com \
--cc=xavier_huwei@163.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).