From: "Wei Hu (Xavier)" <xavier.huwei@huawei.com>
To: <dev@dpdk.org>
Cc: <linuxarm@huawei.com>, <xavier_huwei@163.com>,
<xavier.huwei@tom.com>, <forest.zhouchang@huawei.com>
Subject: [dpdk-dev] [PATCH v3 08/22] net/hns3: add support for some misc operations
Date: Thu, 26 Sep 2019 22:01:54 +0800 [thread overview]
Message-ID: <1569506528-60464-9-git-send-email-xavier.huwei@huawei.com> (raw)
In-Reply-To: <1569506528-60464-1-git-send-email-xavier.huwei@huawei.com>
This patch adds the following operations defined in struct eth_dev_ops:
mtu_set, infos_get and fw_version_get for hns3 PMD driver.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
---
v1 -> v2:
Address Ferruh Yigit's comments as follows:
https://inbox.dpdk.org/dev/2543572c-6fbc-af20-1807-fbd7ab4135f7@intel.com
---
doc/guides/nics/features/hns3.ini | 2 +
drivers/net/hns3/hns3_ethdev.c | 108 ++++++++++++++++++++++++++++++++++++++
2 files changed, 110 insertions(+)
diff --git a/doc/guides/nics/features/hns3.ini b/doc/guides/nics/features/hns3.ini
index 43ade8c..2eb78d0 100644
--- a/doc/guides/nics/features/hns3.ini
+++ b/doc/guides/nics/features/hns3.ini
@@ -4,8 +4,10 @@
; Refer to default.ini for the full list of available PMD features.
;
[Features]
+MTU update = Y
Unicast MAC filter = Y
Multicast MAC filter = Y
+FW version = Y
Linux UIO = Y
Linux VFIO = Y
ARMv8 = Y
diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index 277db4a..918a386 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -945,6 +945,111 @@ hns3_config_mtu(struct hns3_hw *hw, uint16_t mps)
}
static int
+hns3_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct hns3_adapter *hns = dev->data->dev_private;
+ uint32_t frame_size = mtu + HNS3_ETH_OVERHEAD;
+ struct hns3_hw *hw = &hns->hw;
+ bool is_jumbo_frame;
+ int ret;
+
+ if (dev->data->dev_started) {
+ hns3_err(hw, "Failed to set mtu, port %u must be stopped "
+ "before configuration", dev->data->port_id);
+ return -EBUSY;
+ }
+
+ rte_spinlock_lock(&hw->lock);
+ is_jumbo_frame = frame_size > RTE_ETHER_MAX_LEN ? true : false;
+ frame_size = RTE_MAX(frame_size, HNS3_DEFAULT_FRAME_LEN);
+
+ /*
+ * Maximum value of frame_size is HNS3_MAX_FRAME_LEN, so it can safely
+ * assign to "uint16_t" type variable.
+ */
+ ret = hns3_config_mtu(hw, (uint16_t)frame_size);
+ if (ret) {
+ rte_spinlock_unlock(&hw->lock);
+ hns3_err(hw, "Failed to set mtu, port %u mtu %u: %d",
+ dev->data->port_id, mtu, ret);
+ return ret;
+ }
+ hns->pf.mps = (uint16_t)frame_size;
+ if (is_jumbo_frame)
+ dev->data->dev_conf.rxmode.offloads |=
+ DEV_RX_OFFLOAD_JUMBO_FRAME;
+ else
+ dev->data->dev_conf.rxmode.offloads &=
+ ~DEV_RX_OFFLOAD_JUMBO_FRAME;
+ dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
+ rte_spinlock_unlock(&hw->lock);
+
+ return 0;
+}
+
+static int
+hns3_dev_infos_get(struct rte_eth_dev *eth_dev, struct rte_eth_dev_info *info)
+{
+ struct hns3_adapter *hns = eth_dev->data->dev_private;
+ struct hns3_hw *hw = &hns->hw;
+
+ info->max_rx_queues = hw->tqps_num;
+ info->max_tx_queues = hw->tqps_num;
+ info->max_rx_pktlen = HNS3_MAX_FRAME_LEN; /* CRC included */
+ info->min_rx_bufsize = hw->rx_buf_len;
+ info->max_mac_addrs = HNS3_UC_MACADDR_NUM;
+ info->max_mtu = info->max_rx_pktlen - HNS3_ETH_OVERHEAD;
+ info->rx_offload_capa = (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_SCTP_CKSUM |
+ DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_OUTER_UDP_CKSUM |
+ DEV_RX_OFFLOAD_KEEP_CRC |
+ DEV_RX_OFFLOAD_SCATTER |
+ DEV_RX_OFFLOAD_VLAN_STRIP |
+ DEV_RX_OFFLOAD_QINQ_STRIP |
+ DEV_RX_OFFLOAD_VLAN_FILTER |
+ DEV_RX_OFFLOAD_VLAN_EXTEND |
+ DEV_RX_OFFLOAD_JUMBO_FRAME);
+ info->tx_queue_offload_capa = DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+ info->tx_offload_capa = (DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM |
+ DEV_TX_OFFLOAD_IPV4_CKSUM |
+ DEV_TX_OFFLOAD_TCP_CKSUM |
+ DEV_TX_OFFLOAD_UDP_CKSUM |
+ DEV_TX_OFFLOAD_SCTP_CKSUM |
+ DEV_TX_OFFLOAD_VLAN_INSERT |
+ DEV_TX_OFFLOAD_QINQ_INSERT |
+ DEV_TX_OFFLOAD_MULTI_SEGS |
+ info->tx_queue_offload_capa);
+
+ info->vmdq_queue_num = 0;
+
+ info->default_rxportconf.burst_size = HNS3_DEFAULT_PORT_CONF_BURST_SIZE;
+ info->default_txportconf.burst_size = HNS3_DEFAULT_PORT_CONF_BURST_SIZE;
+ info->default_rxportconf.nb_queues = HNS3_DEFAULT_PORT_CONF_QUEUES_NUM;
+ info->default_txportconf.nb_queues = HNS3_DEFAULT_PORT_CONF_QUEUES_NUM;
+
+ return 0;
+}
+
+static int
+hns3_fw_version_get(struct rte_eth_dev *eth_dev, char *fw_version,
+ size_t fw_size)
+{
+ struct hns3_adapter *hns = eth_dev->data->dev_private;
+ struct hns3_hw *hw = &hns->hw;
+ int ret;
+
+ ret = snprintf(fw_version, fw_size, "0x%08x", hw->fw_version);
+ ret += 1; /* add the size of '\0' */
+ if (fw_size < (uint32_t)ret)
+ return ret;
+ else
+ return 0;
+}
+
+static int
hns3_parse_func_status(struct hns3_hw *hw, struct hns3_func_status_cmd *status)
{
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
@@ -2338,6 +2443,9 @@ hns3_dev_close(struct rte_eth_dev *eth_dev)
static const struct eth_dev_ops hns3_eth_dev_ops = {
.dev_close = hns3_dev_close,
+ .mtu_set = hns3_dev_mtu_set,
+ .dev_infos_get = hns3_dev_infos_get,
+ .fw_version_get = hns3_fw_version_get,
.mac_addr_add = hns3_add_mac_addr,
.mac_addr_remove = hns3_remove_mac_addr,
.mac_addr_set = hns3_set_default_mac_addr,
--
2.7.4
next prev parent reply other threads:[~2019-09-26 14:05 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-26 14:01 [dpdk-dev] [PATCH v3 00/22] add hns3 ethernet PMD driver Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 01/22] net/hns3: add build and doc infrastructure Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 02/22] net/hns3: add hardware registers definition Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 03/22] net/hns3: add some definitions for data structure and macro Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 04/22] net/hns3: register hns3 PMD driver and add the log interface definition Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 05/22] net/hns3: add support for cmd of hns3 PMD driver Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 06/22] net/hns3: add the initialization " Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 07/22] net/hns3: add support for MAC address related operations Wei Hu (Xavier)
2019-09-26 14:01 ` Wei Hu (Xavier) [this message]
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 09/22] net/hns3: add support for link_update operation Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 10/22] net/hns3: add support for flow directory of hns3 PMD driver Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 11/22] net/hns3: add support for RSS " Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 12/22] net/hns3: add support for flow control " Wei Hu (Xavier)
2019-09-26 14:01 ` [dpdk-dev] [PATCH v3 13/22] net/hns3: add support for vlan " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 14/22] net/hns3: add support for mailbox " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 15/22] net/hns3: add support for hns3 VF " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 16/22] net/hns3: add RX/TX package burst and queue related operation Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 17/22] net/hns3: add start stop configure promiscuous ops Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 18/22] net/hns3: add dump register ops for hns3 PMD driver Wei Hu (Xavier)
2019-09-27 18:31 ` Ferruh Yigit
2019-09-29 12:09 ` Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 19/22] net/hns3: add abnormal interrupt process " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 20/22] net/hns3: add stats related ops " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 21/22] net/hns3: add reset related process " Wei Hu (Xavier)
2019-09-26 14:02 ` [dpdk-dev] [PATCH v3 22/22] net/hns3: add multiple process support " Wei Hu (Xavier)
2019-09-27 6:52 ` [dpdk-dev] [PATCH v3 00/22] add hns3 ethernet " Wei Hu (Xavier)
2019-09-27 8:47 ` Ferruh Yigit
2019-09-27 19:16 ` Jeremy Plsek
2019-09-27 18:30 ` Ferruh Yigit
2019-09-29 12:12 ` Wei Hu (Xavier)
2019-09-30 8:52 ` Ferruh Yigit
2019-10-11 1:30 ` Wei Hu (Xavier)
2019-10-10 17:10 ` Ferruh Yigit
2019-10-11 1:39 ` Wei Hu (Xavier)
2019-10-11 2:40 ` Wei Hu (Xavier)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1569506528-60464-9-git-send-email-xavier.huwei@huawei.com \
--to=xavier.huwei@huawei.com \
--cc=dev@dpdk.org \
--cc=forest.zhouchang@huawei.com \
--cc=linuxarm@huawei.com \
--cc=xavier.huwei@tom.com \
--cc=xavier_huwei@163.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).