From: Ori Kam <orika@mellanox.com>
To: Matan Azrad <matan@mellanox.com>,
Shahaf Shuler <shahafs@mellanox.com>,
Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Cc: dev@dpdk.org, orika@mellanox.com, jingjing.wu@intel.com,
stephen@networkplumber.org
Subject: [dpdk-dev] [PATCH v2 03/14] net/mlx5: support Rx hairpin queues
Date: Fri, 4 Oct 2019 19:54:04 +0000 [thread overview]
Message-ID: <1570218855-73478-4-git-send-email-orika@mellanox.com> (raw)
In-Reply-To: <1570218855-73478-1-git-send-email-orika@mellanox.com>
This commit adds the support for creating Rx hairpin queues.
Hairpin queue is a queue that is created using DevX and only used
by the HW. This results in that all the data part of the RQ is not being
used.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
---
drivers/net/mlx5/mlx5.c | 2 +
drivers/net/mlx5/mlx5_rxq.c | 270 ++++++++++++++++++++++++++++++++++++----
drivers/net/mlx5/mlx5_rxtx.h | 15 +++
drivers/net/mlx5/mlx5_trigger.c | 7 ++
4 files changed, 270 insertions(+), 24 deletions(-)
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 13d112e..1b84fdc 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -974,6 +974,7 @@ struct mlx5_dev_spawn_data {
.dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
.vlan_filter_set = mlx5_vlan_filter_set,
.rx_queue_setup = mlx5_rx_queue_setup,
+ .rx_hairpin_queue_setup = mlx5_rx_hairpin_queue_setup,
.tx_queue_setup = mlx5_tx_queue_setup,
.rx_queue_release = mlx5_rx_queue_release,
.tx_queue_release = mlx5_tx_queue_release,
@@ -1040,6 +1041,7 @@ struct mlx5_dev_spawn_data {
.dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
.vlan_filter_set = mlx5_vlan_filter_set,
.rx_queue_setup = mlx5_rx_queue_setup,
+ .rx_hairpin_queue_setup = mlx5_rx_hairpin_queue_setup,
.tx_queue_setup = mlx5_tx_queue_setup,
.rx_queue_release = mlx5_rx_queue_release,
.tx_queue_release = mlx5_tx_queue_release,
diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index a1fdeef..97a2031 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -106,21 +106,25 @@
struct mlx5_priv *priv = dev->data->dev_private;
uint16_t i;
uint16_t n = 0;
+ uint16_t n_ibv = 0;
if (mlx5_check_mprq_support(dev) < 0)
return 0;
/* All the configured queues should be enabled. */
for (i = 0; i < priv->rxqs_n; ++i) {
struct mlx5_rxq_data *rxq = (*priv->rxqs)[i];
+ struct mlx5_rxq_ctrl *rxq_ctrl = container_of
+ (rxq, struct mlx5_rxq_ctrl, rxq);
- if (!rxq)
+ if (rxq == NULL || rxq_ctrl->type != MLX5_RXQ_TYPE_STANDARD)
continue;
+ n_ibv++;
if (mlx5_rxq_mprq_enabled(rxq))
++n;
}
/* Multi-Packet RQ can't be partially configured. */
- assert(n == 0 || n == priv->rxqs_n);
- return n == priv->rxqs_n;
+ assert(n == 0 || n == n_ibv);
+ return n == n_ibv;
}
/**
@@ -427,6 +431,7 @@
}
/**
+ * Rx queue presetup checks.
*
* @param dev
* Pointer to Ethernet device structure.
@@ -434,25 +439,14 @@
* RX queue index.
* @param desc
* Number of descriptors to configure in queue.
- * @param socket
- * NUMA socket on which memory must be allocated.
- * @param[in] conf
- * Thresholds parameters.
- * @param mp
- * Memory pool for buffer allocations.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-int
-mlx5_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
- unsigned int socket, const struct rte_eth_rxconf *conf,
- struct rte_mempool *mp)
+static int
+mlx5_rx_queue_pre_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc)
{
struct mlx5_priv *priv = dev->data->dev_private;
- struct mlx5_rxq_data *rxq = (*priv->rxqs)[idx];
- struct mlx5_rxq_ctrl *rxq_ctrl =
- container_of(rxq, struct mlx5_rxq_ctrl, rxq);
if (!rte_is_power_of_2(desc)) {
desc = 1 << log2above(desc);
@@ -476,6 +470,41 @@
return -rte_errno;
}
mlx5_rxq_release(dev, idx);
+ return 0;
+}
+
+/**
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * RX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param socket
+ * NUMA socket on which memory must be allocated.
+ * @param[in] conf
+ * Thresholds parameters.
+ * @param mp
+ * Memory pool for buffer allocations.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ unsigned int socket, const struct rte_eth_rxconf *conf,
+ struct rte_mempool *mp)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_rxq_data *rxq = (*priv->rxqs)[idx];
+ struct mlx5_rxq_ctrl *rxq_ctrl =
+ container_of(rxq, struct mlx5_rxq_ctrl, rxq);
+ int res;
+
+ res = mlx5_rx_queue_pre_setup(dev, idx, desc);
+ if (res)
+ return res;
rxq_ctrl = mlx5_rxq_new(dev, idx, desc, socket, conf, mp);
if (!rxq_ctrl) {
DRV_LOG(ERR, "port %u unable to allocate queue index %u",
@@ -490,6 +519,56 @@
}
/**
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * RX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param hairpin_conf
+ * Hairpin configuration parameters.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_rx_hairpin_queue_setup(struct rte_eth_dev *dev, uint16_t idx,
+ uint16_t desc,
+ const struct rte_eth_hairpin_conf *hairpin_conf)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_rxq_data *rxq = (*priv->rxqs)[idx];
+ struct mlx5_rxq_ctrl *rxq_ctrl =
+ container_of(rxq, struct mlx5_rxq_ctrl, rxq);
+ int res;
+
+ res = mlx5_rx_queue_pre_setup(dev, idx, desc);
+ if (res)
+ return res;
+ if (hairpin_conf->peer_n != 1 ||
+ hairpin_conf->peers[0].port != dev->data->port_id ||
+ hairpin_conf->peers[0].queue >= priv->txqs_n) {
+ DRV_LOG(ERR, "port %u unable to setup hairpin queue index %u "
+ " invalid hairpind configuration", dev->data->port_id,
+ idx);
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ rxq_ctrl = mlx5_rxq_hairpin_new(dev, idx, desc, hairpin_conf);
+ if (!rxq_ctrl) {
+ DRV_LOG(ERR, "port %u unable to allocate queue index %u",
+ dev->data->port_id, idx);
+ rte_errno = ENOMEM;
+ return -rte_errno;
+ }
+ DRV_LOG(DEBUG, "port %u adding Rx queue %u to list",
+ dev->data->port_id, idx);
+ (*priv->rxqs)[idx] = &rxq_ctrl->rxq;
+ return 0;
+}
+
+/**
* DPDK callback to release a RX queue.
*
* @param dpdk_rxq
@@ -561,6 +640,24 @@
}
/**
+ * Release an Rx hairpin related resources.
+ *
+ * @param rxq_obj
+ * Hairpin Rx queue object.
+ */
+static void
+rxq_obj_hairpin_release(struct mlx5_rxq_obj *rxq_obj)
+{
+ struct mlx5_devx_modify_rq_attr rq_attr = { 0 };
+
+ assert(rxq_obj);
+ rq_attr.state = MLX5_RQC_STATE_RST;
+ rq_attr.rq_state = MLX5_RQC_STATE_RDY;
+ mlx5_devx_cmd_modify_rq(rxq_obj->rq, &rq_attr);
+ claim_zero(mlx5_devx_cmd_destroy(rxq_obj->rq));
+}
+
+/**
* Release an Rx verbs/DevX queue object.
*
* @param rxq_obj
@@ -577,14 +674,22 @@
assert(rxq_obj->wq);
assert(rxq_obj->cq);
if (rte_atomic32_dec_and_test(&rxq_obj->refcnt)) {
- rxq_free_elts(rxq_obj->rxq_ctrl);
- if (rxq_obj->type == MLX5_RXQ_OBJ_TYPE_IBV) {
+ switch (rxq_obj->type) {
+ case MLX5_RXQ_OBJ_TYPE_IBV:
+ rxq_free_elts(rxq_obj->rxq_ctrl);
claim_zero(mlx5_glue->destroy_wq(rxq_obj->wq));
- } else if (rxq_obj->type == MLX5_RXQ_OBJ_TYPE_DEVX_RQ) {
+ claim_zero(mlx5_glue->destroy_cq(rxq_obj->cq));
+ break;
+ case MLX5_RXQ_OBJ_TYPE_DEVX_RQ:
+ rxq_free_elts(rxq_obj->rxq_ctrl);
claim_zero(mlx5_devx_cmd_destroy(rxq_obj->rq));
rxq_release_rq_resources(rxq_obj->rxq_ctrl);
+ claim_zero(mlx5_glue->destroy_cq(rxq_obj->cq));
+ break;
+ case MLX5_RXQ_OBJ_TYPE_DEVX_HAIRPIN:
+ rxq_obj_hairpin_release(rxq_obj);
+ break;
}
- claim_zero(mlx5_glue->destroy_cq(rxq_obj->cq));
if (rxq_obj->channel)
claim_zero(mlx5_glue->destroy_comp_channel
(rxq_obj->channel));
@@ -1132,6 +1237,70 @@
}
/**
+ * Create the Rx hairpin queue object.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param idx
+ * Queue index in DPDK Rx queue array
+ *
+ * @return
+ * The hairpin DevX object initialised, NULL otherwise and rte_errno is set.
+ */
+static struct mlx5_rxq_obj *
+mlx5_rxq_obj_hairpin_new(struct rte_eth_dev *dev, uint16_t idx)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_rxq_data *rxq_data = (*priv->rxqs)[idx];
+ struct mlx5_rxq_ctrl *rxq_ctrl =
+ container_of(rxq_data, struct mlx5_rxq_ctrl, rxq);
+ struct mlx5_devx_create_rq_attr attr = { 0 };
+ struct mlx5_rxq_obj *tmpl = NULL;
+ int ret = 0;
+
+ assert(rxq_data);
+ assert(!rxq_ctrl->obj);
+ tmpl = rte_calloc_socket(__func__, 1, sizeof(*tmpl), 0,
+ rxq_ctrl->socket);
+ if (!tmpl) {
+ DRV_LOG(ERR,
+ "port %u Rx queue %u cannot allocate verbs resources",
+ dev->data->port_id, rxq_data->idx);
+ rte_errno = ENOMEM;
+ goto error;
+ }
+ tmpl->type = MLX5_RXQ_OBJ_TYPE_DEVX_HAIRPIN;
+ tmpl->rxq_ctrl = rxq_ctrl;
+ attr.hairpin = 1;
+ /* Workaround for hairpin startup */
+ attr.wq_attr.log_hairpin_num_packets = log2above(32);
+ /* Workaround for packets larger than 1KB */
+ attr.wq_attr.log_hairpin_data_sz =
+ priv->config.hca_attr.log_max_hairpin_wq_data_sz;
+ tmpl->rq = mlx5_devx_cmd_create_rq(priv->sh->ctx, &attr,
+ rxq_ctrl->socket);
+ if (!tmpl->rq) {
+ DRV_LOG(ERR,
+ "port %u Rx hairpin queue %u can't create rq object",
+ dev->data->port_id, idx);
+ rte_errno = errno;
+ goto error;
+ }
+ DRV_LOG(DEBUG, "port %u rxq %u updated with %p", dev->data->port_id,
+ idx, (void *)&tmpl);
+ rte_atomic32_inc(&tmpl->refcnt);
+ LIST_INSERT_HEAD(&priv->rxqsobj, tmpl, next);
+ priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_NONE;
+ return tmpl;
+error:
+ ret = rte_errno; /* Save rte_errno before cleanup. */
+ if (tmpl->rq)
+ mlx5_devx_cmd_destroy(tmpl->rq);
+ rte_errno = ret; /* Restore rte_errno. */
+ return NULL;
+}
+
+/**
* Create the Rx queue Verbs/DevX object.
*
* @param dev
@@ -1163,6 +1332,8 @@ struct mlx5_rxq_obj *
assert(rxq_data);
assert(!rxq_ctrl->obj);
+ if (type == MLX5_RXQ_OBJ_TYPE_DEVX_HAIRPIN)
+ return mlx5_rxq_obj_hairpin_new(dev, idx);
priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_RX_QUEUE;
priv->verbs_alloc_ctx.obj = rxq_ctrl;
tmpl = rte_calloc_socket(__func__, 1, sizeof(*tmpl), 0,
@@ -1433,15 +1604,19 @@ struct mlx5_rxq_obj *
unsigned int strd_num_n = 0;
unsigned int strd_sz_n = 0;
unsigned int i;
+ unsigned int n_ibv = 0;
if (!mlx5_mprq_enabled(dev))
return 0;
/* Count the total number of descriptors configured. */
for (i = 0; i != priv->rxqs_n; ++i) {
struct mlx5_rxq_data *rxq = (*priv->rxqs)[i];
+ struct mlx5_rxq_ctrl *rxq_ctrl = container_of
+ (rxq, struct mlx5_rxq_ctrl, rxq);
- if (rxq == NULL)
+ if (rxq == NULL || rxq_ctrl->type != MLX5_RXQ_TYPE_STANDARD)
continue;
+ n_ibv++;
desc += 1 << rxq->elts_n;
/* Get the max number of strides. */
if (strd_num_n < rxq->strd_num_n)
@@ -1466,7 +1641,7 @@ struct mlx5_rxq_obj *
* this Mempool gets available again.
*/
desc *= 4;
- obj_num = desc + MLX5_MPRQ_MP_CACHE_SZ * priv->rxqs_n;
+ obj_num = desc + MLX5_MPRQ_MP_CACHE_SZ * n_ibv;
/*
* rte_mempool_create_empty() has sanity check to refuse large cache
* size compared to the number of elements.
@@ -1514,8 +1689,10 @@ struct mlx5_rxq_obj *
/* Set mempool for each Rx queue. */
for (i = 0; i != priv->rxqs_n; ++i) {
struct mlx5_rxq_data *rxq = (*priv->rxqs)[i];
+ struct mlx5_rxq_ctrl *rxq_ctrl = container_of
+ (rxq, struct mlx5_rxq_ctrl, rxq);
- if (rxq == NULL)
+ if (rxq == NULL || rxq_ctrl->type != MLX5_RXQ_TYPE_STANDARD)
continue;
rxq->mprq_mp = mp;
}
@@ -1620,6 +1797,7 @@ struct mlx5_rxq_ctrl *
rte_errno = ENOMEM;
return NULL;
}
+ tmpl->type = MLX5_RXQ_TYPE_STANDARD;
if (mlx5_mr_btree_init(&tmpl->rxq.mr_ctrl.cache_bh,
MLX5_MR_BTREE_CACHE_N, socket)) {
/* rte_errno is already set. */
@@ -1788,6 +1966,49 @@ struct mlx5_rxq_ctrl *
}
/**
+ * Create a DPDK Rx hairpin queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param idx
+ * RX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param hairpin_conf
+ * The hairpin binding configuration.
+ *
+ * @return
+ * A DPDK queue object on success, NULL otherwise and rte_errno is set.
+ */
+struct mlx5_rxq_ctrl *
+mlx5_rxq_hairpin_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ const struct rte_eth_hairpin_conf *hairpin_conf)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_rxq_ctrl *tmpl;
+
+ tmpl = rte_calloc_socket("RXQ", 1, sizeof(*tmpl), 0, SOCKET_ID_ANY);
+ if (!tmpl) {
+ rte_errno = ENOMEM;
+ return NULL;
+ }
+ tmpl->type = MLX5_RXQ_TYPE_HAIRPIN;
+ tmpl->socket = SOCKET_ID_ANY;
+ tmpl->rxq.rss_hash = 0;
+ tmpl->rxq.port_id = dev->data->port_id;
+ tmpl->priv = priv;
+ tmpl->rxq.mp = NULL;
+ tmpl->rxq.elts_n = log2above(desc);
+ tmpl->rxq.elts = NULL;
+ tmpl->rxq.mr_ctrl.cache_bh = (struct mlx5_mr_btree) { 0 };
+ tmpl->hairpin_conf = *hairpin_conf;
+ tmpl->rxq.idx = idx;
+ rte_atomic32_inc(&tmpl->refcnt);
+ LIST_INSERT_HEAD(&priv->rxqsctrl, tmpl, next);
+ return tmpl;
+}
+
+/**
* Get a Rx queue.
*
* @param dev
@@ -1841,7 +2062,8 @@ struct mlx5_rxq_ctrl *
if (rxq_ctrl->dbr_umem_id_valid)
claim_zero(mlx5_release_dbr(dev, rxq_ctrl->dbr_umem_id,
rxq_ctrl->dbr_offset));
- mlx5_mr_btree_free(&rxq_ctrl->rxq.mr_ctrl.cache_bh);
+ if (rxq_ctrl->type == MLX5_RXQ_TYPE_STANDARD)
+ mlx5_mr_btree_free(&rxq_ctrl->rxq.mr_ctrl.cache_bh);
LIST_REMOVE(rxq_ctrl, next);
rte_free(rxq_ctrl);
(*priv->rxqs)[idx] = NULL;
diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
index 4bb28a4..13fdc38 100644
--- a/drivers/net/mlx5/mlx5_rxtx.h
+++ b/drivers/net/mlx5/mlx5_rxtx.h
@@ -159,6 +159,13 @@ struct mlx5_rxq_data {
enum mlx5_rxq_obj_type {
MLX5_RXQ_OBJ_TYPE_IBV, /* mlx5_rxq_obj with ibv_wq. */
MLX5_RXQ_OBJ_TYPE_DEVX_RQ, /* mlx5_rxq_obj with mlx5_devx_rq. */
+ MLX5_RXQ_OBJ_TYPE_DEVX_HAIRPIN,
+ /* mlx5_rxq_obj with mlx5_devx_rq and hairpin support. */
+};
+
+enum mlx5_rxq_type {
+ MLX5_RXQ_TYPE_STANDARD, /* Standard Rx queue. */
+ MLX5_RXQ_TYPE_HAIRPIN, /* Hairpin Rx queue. */
};
/* Verbs/DevX Rx queue elements. */
@@ -183,6 +190,7 @@ struct mlx5_rxq_ctrl {
rte_atomic32_t refcnt; /* Reference counter. */
struct mlx5_rxq_obj *obj; /* Verbs/DevX elements. */
struct mlx5_priv *priv; /* Back pointer to private data. */
+ enum mlx5_rxq_type type; /* Rxq type. */
unsigned int socket; /* CPU socket ID for allocations. */
unsigned int irq:1; /* Whether IRQ is enabled. */
unsigned int dbr_umem_id_valid:1; /* dbr_umem_id holds a valid value. */
@@ -193,6 +201,7 @@ struct mlx5_rxq_ctrl {
uint32_t dbr_umem_id; /* Storing door-bell information, */
uint64_t dbr_offset; /* needed when freeing door-bell. */
struct mlx5dv_devx_umem *wq_umem; /* WQ buffer registration info. */
+ struct rte_eth_hairpin_conf hairpin_conf; /* Hairpin configuration. */
};
enum mlx5_ind_tbl_type {
@@ -339,6 +348,9 @@ struct mlx5_txq_ctrl {
int mlx5_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
unsigned int socket, const struct rte_eth_rxconf *conf,
struct rte_mempool *mp);
+int mlx5_rx_hairpin_queue_setup
+ (struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ const struct rte_eth_hairpin_conf *hairpin_conf);
void mlx5_rx_queue_release(void *dpdk_rxq);
int mlx5_rx_intr_vec_enable(struct rte_eth_dev *dev);
void mlx5_rx_intr_vec_disable(struct rte_eth_dev *dev);
@@ -351,6 +363,9 @@ struct mlx5_rxq_ctrl *mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx,
uint16_t desc, unsigned int socket,
const struct rte_eth_rxconf *conf,
struct rte_mempool *mp);
+struct mlx5_rxq_ctrl *mlx5_rxq_hairpin_new
+ (struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ const struct rte_eth_hairpin_conf *hairpin_conf);
struct mlx5_rxq_ctrl *mlx5_rxq_get(struct rte_eth_dev *dev, uint16_t idx);
int mlx5_rxq_release(struct rte_eth_dev *dev, uint16_t idx);
int mlx5_rxq_verify(struct rte_eth_dev *dev);
diff --git a/drivers/net/mlx5/mlx5_trigger.c b/drivers/net/mlx5/mlx5_trigger.c
index 122f31c..cb31ae2 100644
--- a/drivers/net/mlx5/mlx5_trigger.c
+++ b/drivers/net/mlx5/mlx5_trigger.c
@@ -118,6 +118,13 @@
if (!rxq_ctrl)
continue;
+ if (rxq_ctrl->type == MLX5_RXQ_TYPE_HAIRPIN) {
+ rxq_ctrl->obj = mlx5_rxq_obj_new
+ (dev, i, MLX5_RXQ_OBJ_TYPE_DEVX_HAIRPIN);
+ if (!rxq_ctrl->obj)
+ goto error;
+ continue;
+ }
/* Pre-register Rx mempool. */
mp = mlx5_rxq_mprq_enabled(&rxq_ctrl->rxq) ?
rxq_ctrl->rxq.mprq_mp : rxq_ctrl->rxq.mp;
--
1.8.3.1
next prev parent reply other threads:[~2019-10-04 19:55 UTC|newest]
Thread overview: 186+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-26 6:28 [dpdk-dev] [PATCH 00/13] add hairpin feature Ori Kam
2019-09-26 6:28 ` [dpdk-dev] [PATCH 01/13] ethdev: support setup function for hairpin queue Ori Kam
2019-09-26 12:18 ` Andrew Rybchenko
[not found] ` <AM0PR0502MB4019A2FEADE5F9DCD0D9DDFED2860@AM0PR0502MB4019.eurprd05.prod.outlook.com>
2019-09-26 15:58 ` Ori Kam
2019-09-26 17:24 ` Andrew Rybchenko
2019-09-28 15:19 ` Ori Kam
2019-09-29 12:10 ` Andrew Rybchenko
2019-10-02 12:19 ` Ori Kam
2019-10-03 13:26 ` Andrew Rybchenko
2019-10-03 17:46 ` Ori Kam
2019-10-03 18:39 ` Ray Kinsella
2019-09-26 6:28 ` [dpdk-dev] [PATCH 02/13] net/mlx5: query hca hairpin capabilities Ori Kam
2019-09-26 9:31 ` Slava Ovsiienko
2019-09-26 6:28 ` [dpdk-dev] [PATCH 03/13] net/mlx5: support Rx hairpin queues Ori Kam
2019-09-26 9:32 ` Slava Ovsiienko
2019-09-26 6:29 ` [dpdk-dev] [PATCH 04/13] net/mlx5: prepare txq to work with different types Ori Kam
2019-09-26 9:32 ` Slava Ovsiienko
2019-09-26 6:29 ` [dpdk-dev] [PATCH 05/13] net/mlx5: support Tx hairpin queues Ori Kam
2019-09-26 9:32 ` Slava Ovsiienko
2019-09-26 6:29 ` [dpdk-dev] [PATCH 06/13] app/testpmd: add hairpin support Ori Kam
2019-09-26 9:32 ` Slava Ovsiienko
2019-09-26 6:29 ` [dpdk-dev] [PATCH 07/13] net/mlx5: add hairpin binding function Ori Kam
2019-09-26 9:33 ` Slava Ovsiienko
2019-09-26 6:29 ` [dpdk-dev] [PATCH 08/13] net/mlx5: add support for hairpin hrxq Ori Kam
2019-09-26 9:33 ` Slava Ovsiienko
2019-09-26 6:29 ` [dpdk-dev] [PATCH 09/13] net/mlx5: add internal tag item and action Ori Kam
2019-09-26 9:33 ` Slava Ovsiienko
2019-09-26 6:29 ` [dpdk-dev] [PATCH 10/13] net/mlx5: add id generation function Ori Kam
2019-09-26 9:34 ` Slava Ovsiienko
2019-09-26 6:29 ` [dpdk-dev] [PATCH 11/13] net/mlx5: add default flows for hairpin Ori Kam
2019-09-26 9:34 ` Slava Ovsiienko
2019-09-26 6:29 ` [dpdk-dev] [PATCH 12/13] net/mlx5: split hairpin flows Ori Kam
2019-09-26 9:34 ` Slava Ovsiienko
2019-09-26 6:29 ` [dpdk-dev] [PATCH 13/13] doc: add hairpin feature Ori Kam
2019-09-26 9:34 ` Slava Ovsiienko
2019-09-26 12:32 ` [dpdk-dev] [PATCH 00/13] " Andrew Rybchenko
2019-09-26 15:22 ` Ori Kam
2019-09-26 15:48 ` Andrew Rybchenko
2019-09-26 16:11 ` Ori Kam
2019-10-04 19:54 ` [dpdk-dev] [PATCH v2 00/14] " Ori Kam
2019-10-04 19:54 ` [dpdk-dev] [PATCH v2 01/14] ethdev: add support for hairpin queue Ori Kam
2019-10-08 16:11 ` Andrew Rybchenko
2019-10-10 21:07 ` Ori Kam
2019-10-14 9:37 ` Andrew Rybchenko
2019-10-14 10:19 ` Ori Kam
2019-10-04 19:54 ` [dpdk-dev] [PATCH v2 02/14] net/mlx5: query hca hairpin capabilities Ori Kam
2019-10-04 19:54 ` Ori Kam [this message]
2019-10-04 19:54 ` [dpdk-dev] [PATCH v2 04/14] net/mlx5: prepare txq to work with different types Ori Kam
2019-10-04 19:54 ` [dpdk-dev] [PATCH v2 05/14] net/mlx5: support Tx hairpin queues Ori Kam
2019-10-04 19:54 ` [dpdk-dev] [PATCH v2 06/14] net/mlx5: add get hairpin capabilities Ori Kam
2019-10-04 19:54 ` [dpdk-dev] [PATCH v2 07/14] app/testpmd: add hairpin support Ori Kam
2019-10-04 19:54 ` [dpdk-dev] [PATCH v2 08/14] net/mlx5: add hairpin binding function Ori Kam
2019-10-04 19:54 ` [dpdk-dev] [PATCH v2 09/14] net/mlx5: add support for hairpin hrxq Ori Kam
2019-10-04 19:54 ` [dpdk-dev] [PATCH v2 10/14] net/mlx5: add internal tag item and action Ori Kam
2019-10-04 19:54 ` [dpdk-dev] [PATCH v2 11/14] net/mlx5: add id generation function Ori Kam
2019-10-04 19:54 ` [dpdk-dev] [PATCH v2 12/14] net/mlx5: add default flows for hairpin Ori Kam
2019-10-04 19:54 ` [dpdk-dev] [PATCH v2 13/14] net/mlx5: split hairpin flows Ori Kam
2019-10-04 19:54 ` [dpdk-dev] [PATCH v2 14/14] doc: add hairpin feature Ori Kam
2019-10-08 14:55 ` Andrew Rybchenko
2019-10-10 8:24 ` Ori Kam
2019-10-15 9:04 ` [dpdk-dev] [PATCH v3 00/14] " Ori Kam
2019-10-15 9:04 ` [dpdk-dev] [PATCH v3 01/14] ethdev: add support for hairpin queue Ori Kam
2019-10-15 10:12 ` Andrew Rybchenko
2019-10-16 19:36 ` Ori Kam
2019-10-17 10:41 ` Andrew Rybchenko
2019-10-15 9:04 ` [dpdk-dev] [PATCH v3 02/14] net/mlx5: query hca hairpin capabilities Ori Kam
2019-10-15 9:04 ` [dpdk-dev] [PATCH v3 03/14] net/mlx5: support Rx hairpin queues Ori Kam
2019-10-15 9:04 ` [dpdk-dev] [PATCH v3 04/14] net/mlx5: prepare txq to work with different types Ori Kam
2019-10-15 9:04 ` [dpdk-dev] [PATCH v3 05/14] net/mlx5: support Tx hairpin queues Ori Kam
2019-10-15 9:04 ` [dpdk-dev] [PATCH v3 06/14] net/mlx5: add get hairpin capabilities Ori Kam
2019-10-15 9:04 ` [dpdk-dev] [PATCH v3 07/14] app/testpmd: add hairpin support Ori Kam
2019-10-15 9:04 ` [dpdk-dev] [PATCH v3 08/14] net/mlx5: add hairpin binding function Ori Kam
2019-10-15 9:04 ` [dpdk-dev] [PATCH v3 09/14] net/mlx5: add support for hairpin hrxq Ori Kam
2019-10-15 9:04 ` [dpdk-dev] [PATCH v3 10/14] net/mlx5: add internal tag item and action Ori Kam
2019-10-15 9:04 ` [dpdk-dev] [PATCH v3 11/14] net/mlx5: add id generation function Ori Kam
2019-10-15 9:04 ` [dpdk-dev] [PATCH v3 12/14] net/mlx5: add default flows for hairpin Ori Kam
2019-10-15 9:04 ` [dpdk-dev] [PATCH v3 13/14] net/mlx5: split hairpin flows Ori Kam
2019-10-15 9:04 ` [dpdk-dev] [PATCH v3 14/14] doc: add hairpin feature Ori Kam
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 00/15] " Ori Kam
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 01/15] ethdev: move queue state defines to private file Ori Kam
2019-10-17 15:37 ` Stephen Hemminger
2019-10-22 10:59 ` Andrew Rybchenko
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 02/15] ethdev: add support for hairpin queue Ori Kam
2019-10-17 21:01 ` Thomas Monjalon
2019-10-22 11:37 ` Andrew Rybchenko
2019-10-23 6:23 ` Ori Kam
2019-10-23 7:04 ` Thomas Monjalon
2019-10-23 10:09 ` Ori Kam
2019-10-23 10:18 ` Bruce Richardson
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 03/15] net/mlx5: query hca hairpin capabilities Ori Kam
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 04/15] net/mlx5: support Rx hairpin queues Ori Kam
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 05/15] net/mlx5: prepare txq to work with different types Ori Kam
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 06/15] net/mlx5: support Tx hairpin queues Ori Kam
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 07/15] net/mlx5: add get hairpin capabilities Ori Kam
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 08/15] app/testpmd: add hairpin support Ori Kam
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 09/15] net/mlx5: add hairpin binding function Ori Kam
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 10/15] net/mlx5: add support for hairpin hrxq Ori Kam
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 11/15] net/mlx5: add internal tag item and action Ori Kam
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 12/15] net/mlx5: add id generation function Ori Kam
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 13/15] net/mlx5: add default flows for hairpin Ori Kam
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 14/15] net/mlx5: split hairpin flows Ori Kam
2019-10-17 15:32 ` [dpdk-dev] [PATCH v4 15/15] doc: add hairpin feature Ori Kam
2019-10-18 19:07 ` [dpdk-dev] [PATCH v4 00/15] " Ferruh Yigit
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 " Ori Kam
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 01/15] ethdev: move queue state defines to private file Ori Kam
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 02/15] ethdev: add support for hairpin queue Ori Kam
2019-10-24 7:54 ` Andrew Rybchenko
2019-10-24 8:29 ` Ori Kam
2019-10-24 14:47 ` Andrew Rybchenko
2019-10-24 15:17 ` Thomas Monjalon
2019-10-24 15:30 ` Andrew Rybchenko
2019-10-24 15:34 ` Thomas Monjalon
2019-10-25 19:01 ` Ori Kam
2019-10-25 22:16 ` Thomas Monjalon
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 03/15] net/mlx5: query hca hairpin capabilities Ori Kam
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 04/15] net/mlx5: support Rx hairpin queues Ori Kam
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 05/15] net/mlx5: prepare txq to work with different types Ori Kam
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 06/15] net/mlx5: support Tx hairpin queues Ori Kam
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 07/15] net/mlx5: add get hairpin capabilities Ori Kam
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 08/15] app/testpmd: add hairpin support Ori Kam
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 09/15] net/mlx5: add hairpin binding function Ori Kam
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 10/15] net/mlx5: add support for hairpin hrxq Ori Kam
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 11/15] net/mlx5: add internal tag item and action Ori Kam
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 12/15] net/mlx5: add id generation function Ori Kam
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 13/15] net/mlx5: add default flows for hairpin Ori Kam
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 14/15] net/mlx5: split hairpin flows Ori Kam
2019-10-23 13:37 ` [dpdk-dev] [PATCH v5 15/15] doc: add hairpin feature Ori Kam
2019-10-24 8:11 ` Thomas Monjalon
2019-10-25 18:49 ` [dpdk-dev] [PATCH v5 00/15] " Ferruh Yigit
2019-10-27 12:24 ` [dpdk-dev] [PATCH v6 00/14] " Ori Kam
2019-10-27 12:24 ` [dpdk-dev] [PATCH v6 01/14] ethdev: move queue state defines to private file Ori Kam
2019-10-27 12:24 ` [dpdk-dev] [PATCH v6 02/14] ethdev: add support for hairpin queue Ori Kam
2019-10-28 15:16 ` Andrew Rybchenko
2019-10-28 18:44 ` Ori Kam
2019-10-29 7:38 ` Andrew Rybchenko
2019-10-29 19:39 ` Ori Kam
2019-10-30 6:39 ` Andrew Rybchenko
2019-10-30 6:56 ` Ori Kam
2019-10-27 12:24 ` [dpdk-dev] [PATCH v6 03/14] net/mlx5: query hca hairpin capabilities Ori Kam
2019-10-27 12:24 ` [dpdk-dev] [PATCH v6 04/14] net/mlx5: support Rx hairpin queues Ori Kam
2019-10-27 12:24 ` [dpdk-dev] [PATCH v6 05/14] net/mlx5: prepare txq to work with different types Ori Kam
2019-10-27 12:24 ` [dpdk-dev] [PATCH v6 06/14] net/mlx5: support Tx hairpin queues Ori Kam
2019-10-27 12:24 ` [dpdk-dev] [PATCH v6 07/14] net/mlx5: add get hairpin capabilities Ori Kam
2019-10-27 12:24 ` [dpdk-dev] [PATCH v6 08/14] app/testpmd: add hairpin support Ori Kam
2019-10-27 12:24 ` [dpdk-dev] [PATCH v6 09/14] net/mlx5: add hairpin binding function Ori Kam
2019-10-27 12:24 ` [dpdk-dev] [PATCH v6 10/14] net/mlx5: add support for hairpin hrxq Ori Kam
2019-10-27 12:24 ` [dpdk-dev] [PATCH v6 11/14] net/mlx5: add internal tag item and action Ori Kam
2019-10-27 12:24 ` [dpdk-dev] [PATCH v6 12/14] net/mlx5: add id generation function Ori Kam
2019-10-27 12:25 ` [dpdk-dev] [PATCH v6 13/14] net/mlx5: add default flows for hairpin Ori Kam
2019-10-27 12:25 ` [dpdk-dev] [PATCH v6 14/14] net/mlx5: split hairpin flows Ori Kam
2019-10-30 23:53 ` [dpdk-dev] [PATCH v7 00/14] add hairpin feature Ori Kam
2019-10-30 23:53 ` [dpdk-dev] [PATCH v7 01/14] ethdev: move queue state defines to private file Ori Kam
2019-10-30 23:53 ` [dpdk-dev] [PATCH v7 02/14] ethdev: add support for hairpin queue Ori Kam
2019-10-31 8:25 ` Andrew Rybchenko
2019-11-05 11:24 ` Ferruh Yigit
2019-11-05 11:36 ` Ori Kam
2019-11-05 11:49 ` Andrew Rybchenko
2019-11-05 12:00 ` Ori Kam
2019-11-05 12:05 ` Ferruh Yigit
2019-11-05 12:12 ` Andrew Rybchenko
2019-11-05 12:23 ` Ferruh Yigit
2019-11-05 12:27 ` Andrew Rybchenko
2019-11-05 12:51 ` Thomas Monjalon
2019-11-05 12:53 ` Andrew Rybchenko
2019-11-05 13:02 ` Thomas Monjalon
2019-11-05 13:23 ` Ori Kam
2019-11-05 13:27 ` Thomas Monjalon
2019-11-05 13:34 ` Andrew Rybchenko
2019-11-05 13:41 ` Andrew Rybchenko
2019-10-30 23:53 ` [dpdk-dev] [PATCH v7 03/14] net/mlx5: query hca hairpin capabilities Ori Kam
2019-10-30 23:53 ` [dpdk-dev] [PATCH v7 04/14] net/mlx5: support Rx hairpin queues Ori Kam
2019-10-30 23:53 ` [dpdk-dev] [PATCH v7 05/14] net/mlx5: prepare txq to work with different types Ori Kam
2019-10-30 23:53 ` [dpdk-dev] [PATCH v7 06/14] net/mlx5: support Tx hairpin queues Ori Kam
2019-10-30 23:53 ` [dpdk-dev] [PATCH v7 07/14] net/mlx5: add get hairpin capabilities Ori Kam
2019-10-30 23:53 ` [dpdk-dev] [PATCH v7 08/14] app/testpmd: add hairpin support Ori Kam
2019-10-31 17:11 ` Ferruh Yigit
2019-10-31 17:36 ` Ori Kam
2019-10-31 17:54 ` Ferruh Yigit
2019-10-31 18:59 ` Ori Kam
2019-10-30 23:53 ` [dpdk-dev] [PATCH v7 09/14] net/mlx5: add hairpin binding function Ori Kam
2019-10-30 23:53 ` [dpdk-dev] [PATCH v7 10/14] net/mlx5: add support for hairpin hrxq Ori Kam
2019-10-30 23:53 ` [dpdk-dev] [PATCH v7 11/14] net/mlx5: add internal tag item and action Ori Kam
2019-10-30 23:53 ` [dpdk-dev] [PATCH v7 12/14] net/mlx5: add id generation function Ori Kam
2019-10-30 23:53 ` [dpdk-dev] [PATCH v7 13/14] net/mlx5: add default flows for hairpin Ori Kam
2019-10-30 23:53 ` [dpdk-dev] [PATCH v7 14/14] net/mlx5: split hairpin flows Ori Kam
2019-10-31 17:13 ` [dpdk-dev] [PATCH v7 00/14] add hairpin feature Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1570218855-73478-4-git-send-email-orika@mellanox.com \
--to=orika@mellanox.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=matan@mellanox.com \
--cc=shahafs@mellanox.com \
--cc=stephen@networkplumber.org \
--cc=viacheslavo@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).