DPDK patches and discussions
 help / color / mirror / Atom feed
From: <viveksharma@marvell.com>
To: <dev@dpdk.org>
Cc: <intoviveksharma@gmail.com>, <ferruh.yigit@intel.com>,
	Vivek Sharma <viveksharma@marvell.com>
Subject: [dpdk-dev] [PATCH v2] app/testpmd: support QinQ offload in VLAN set command
Date: Fri, 11 Oct 2019 09:35:21 +0530	[thread overview]
Message-ID: <1570766721-4242-1-git-send-email-viveksharma@marvell.com> (raw)
In-Reply-To: <1568376912-9585-1-git-send-email-viveksharma@marvell.com>

From: Vivek Sharma <viveksharma@marvell.com>

Segregate QinQ from Extend Offload and support QinQ offload
in vlan set command. Merge all port wise rx vlan offloads in
command line help and documentation for a cleaner structure.

Fix port info display to distinguish between qinq strip and
extend offloads. Flatten all VLAN offload info into a single
line to reduce info length.

Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
---
v2:
* Added fix for port info display.
* Flattened port info display VLAN info.

 app/test-pmd/cmdline.c                      | 19 +++++--------
 app/test-pmd/config.c                       | 44 +++++++++++++++++++++++++----
 app/test-pmd/testpmd.h                      |  1 +
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 29 ++++---------------
 4 files changed, 52 insertions(+), 41 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index b1be6b4..291effe 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -325,9 +325,6 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"set vf broadcast (port_id) (vf_id) (on|off)\n"
 			"    Set VF broadcast for a VF from the PF.\n\n"
 
-			"vlan set strip (on|off) (port_id)\n"
-			"    Set the VLAN strip on a port.\n\n"
-
 			"vlan set stripq (on|off) (port_id,queue_id)\n"
 			"    Set the VLAN strip for a queue on a port.\n\n"
 
@@ -358,12 +355,8 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"set tc tx min-bandwidth (port_id) (bw1, bw2, ...)\n"
 			"    Set all TCs' min bandwidth(%%) for all PF and VFs.\n\n"
 
-			"vlan set filter (on|off) (port_id)\n"
-			"    Set the VLAN filter on a port.\n\n"
-
-			"vlan set qinq (on|off) (port_id)\n"
-			"    Set the VLAN QinQ (extended queue in queue)"
-			" on a port.\n\n"
+			"vlan set (strip|filter|qinq_strip|extend) (on|off) (port_id)\n"
+			"    Set the VLAN strip or filter or qinq strip or extend\n\n"
 
 			"vlan set (inner|outer) tpid (value) (port_id)\n"
 			"    Set the VLAN TPID for Packet Filtering on"
@@ -3918,6 +3911,8 @@ cmd_vlan_offload_parsed(void *parsed_result,
 	}
 	else if (!strcmp(res->what, "filter"))
 		rx_vlan_filter_set(port_id, on);
+	else if (!strcmp(res->what, "qinq_strip"))
+		rx_vlan_qinq_strip_set(port_id, on);
 	else
 		vlan_extend_set(port_id, on);
 
@@ -3932,7 +3927,7 @@ cmdline_parse_token_string_t cmd_vlan_offload_set =
 				 set, "set");
 cmdline_parse_token_string_t cmd_vlan_offload_what =
 	TOKEN_STRING_INITIALIZER(struct cmd_vlan_offload_result,
-				 what, "strip#filter#qinq#stripq");
+				what, "strip#filter#qinq_strip#extend#stripq");
 cmdline_parse_token_string_t cmd_vlan_offload_on =
 	TOKEN_STRING_INITIALIZER(struct cmd_vlan_offload_result,
 			      on, "on#off");
@@ -3943,9 +3938,9 @@ cmdline_parse_token_string_t cmd_vlan_offload_portid =
 cmdline_parse_inst_t cmd_vlan_offload = {
 	.f = cmd_vlan_offload_parsed,
 	.data = NULL,
-	.help_str = "vlan set strip|filter|qinq|stripq on|off "
+	.help_str = "vlan set strip|filter|qinq_strip|extend|stripq on|off "
 		"<port_id[,queue_id]>: "
-		"Filter/Strip for rx side qinq(extended) for both rx/tx sides",
+		"Strip/Filter/QinQ for rx side Extend for both rx/tx sides",
 	.tokens = {
 		(void *)&cmd_vlan_offload_vlan,
 		(void *)&cmd_vlan_offload_set,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 24158e5..e428ea8 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -524,19 +524,24 @@ port_infos_display(portid_t port_id)
 	if (vlan_offload >= 0){
 		printf("VLAN offload: \n");
 		if (vlan_offload & ETH_VLAN_STRIP_OFFLOAD)
-			printf("  strip on \n");
+			printf("  strip on, ");
 		else
-			printf("  strip off \n");
+			printf("  strip off, ");
 
 		if (vlan_offload & ETH_VLAN_FILTER_OFFLOAD)
-			printf("  filter on \n");
+			printf("filter on, ");
 		else
-			printf("  filter off \n");
+			printf("filter off, ");
 
 		if (vlan_offload & ETH_VLAN_EXTEND_OFFLOAD)
-			printf("  qinq(extend) on \n");
+			printf("extend on, ");
 		else
-			printf("  qinq(extend) off \n");
+			printf("extend off, ");
+
+		if (vlan_offload & ETH_QINQ_STRIP_OFFLOAD)
+			printf("qinq strip on\n");
+		else
+			printf("qinq strip off\n");
 	}
 
 	if (dev_info.hash_key_size > 0)
@@ -3028,6 +3033,33 @@ rx_vlan_filter_set(portid_t port_id, int on)
 	ports[port_id].dev_conf.rxmode.offloads = port_rx_offloads;
 }
 
+void
+rx_vlan_qinq_strip_set(portid_t port_id, int on)
+{
+	int diag;
+	int vlan_offload;
+	uint64_t port_rx_offloads = ports[port_id].dev_conf.rxmode.offloads;
+
+	if (port_id_is_invalid(port_id, ENABLED_WARN))
+		return;
+
+	vlan_offload = rte_eth_dev_get_vlan_offload(port_id);
+
+	if (on) {
+		vlan_offload |= ETH_QINQ_STRIP_OFFLOAD;
+		port_rx_offloads |= DEV_RX_OFFLOAD_QINQ_STRIP;
+	} else {
+		vlan_offload &= ~ETH_QINQ_STRIP_OFFLOAD;
+		port_rx_offloads &= ~DEV_RX_OFFLOAD_QINQ_STRIP;
+	}
+
+	diag = rte_eth_dev_set_vlan_offload(port_id, vlan_offload);
+	if (diag < 0)
+		printf("%s(port_pi=%d, on=%d) failed "
+	       "diag=%d\n", __func__, port_id, on, diag);
+	ports[port_id].dev_conf.rxmode.offloads = port_rx_offloads;
+}
+
 int
 rx_vft_set(portid_t port_id, uint16_t vlan_id, int on)
 {
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index d73955d..f729649 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -752,6 +752,7 @@ void rx_vlan_strip_set_on_queue(portid_t port_id, uint16_t queue_id, int on);
 
 void rx_vlan_filter_set(portid_t port_id, int on);
 void rx_vlan_all_filter_set(portid_t port_id, int on);
+void rx_vlan_qinq_strip_set(portid_t port_id, int on);
 int rx_vft_set(portid_t port_id, uint16_t vlan_id, int on);
 void vlan_extend_set(portid_t port_id, int on);
 void vlan_tpid_set(portid_t port_id, enum rte_vlan_type vlan_type,
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 67f4339..53e05ef 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -198,9 +198,7 @@ For example:
    Maximum number of MAC addresses: 64
    Maximum number of MAC addresses of hash filtering: 0
    VLAN offload:
-       strip on
-       filter on
-       qinq(extend) off
+       strip on, filter on, extend off, qinq strip off
    Redirection table size: 512
    Supported flow types:
      ipv4-frag
@@ -799,13 +797,6 @@ Set broadcast mode for a VF from the PF::
 
    testpmd> set vf broadcast (port_id) (vf_id) (on|off)
 
-vlan set strip
-~~~~~~~~~~~~~~
-
-Set the VLAN strip on a port::
-
-   testpmd> vlan set strip (on|off) (port_id)
-
 vlan set stripq
 ~~~~~~~~~~~~~~~
 
@@ -841,19 +832,11 @@ Set VLAN antispoof for a VF from the PF::
 
    testpmd> set vf vlan antispoof (port_id) (vf_id) (on|off)
 
-vlan set filter
-~~~~~~~~~~~~~~~
-
-Set the VLAN filter on a port::
-
-   testpmd> vlan set filter (on|off) (port_id)
-
-vlan set qinq
-~~~~~~~~~~~~~
-
-Set the VLAN QinQ (extended queue in queue) on for a port::
+vlan set (strip|filter|qinq_strip|extend)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Set the VLAN strip/filter/QinQ strip/extend on for a port::
 
-   testpmd> vlan set qinq (on|off) (port_id)
+   testpmd> vlan set (strip|filter|qinq_strip|extend) (on|off) (port_id)
 
 vlan set tpid
 ~~~~~~~~~~~~~
@@ -4359,7 +4342,7 @@ Sample QinQ flow rules
 Before creating QinQ rule(s) the following commands should be issued to enable QinQ::
 
    testpmd> port stop 0
-   testpmd> vlan set qinq on 0
+   testpmd> vlan set qinq_strip on 0
 
 The above command sets the inner and outer TPID's to 0x8100.
 
-- 
2.7.4


  parent reply	other threads:[~2019-10-11  4:05 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-13 12:15 [dpdk-dev] [PATCH] " viveksharma
2019-09-29  4:28 ` Vivek Kumar Sharma
2019-10-09 12:56 ` Ferruh Yigit
2019-10-10  7:20   ` Vivek Sharma
2019-10-10 10:24     ` Ferruh Yigit
2019-10-10 10:28       ` Ferruh Yigit
2019-10-10 10:31       ` Vivek Sharma
2019-10-11  4:05 ` viveksharma [this message]
2019-10-14 10:40   ` [dpdk-dev] [PATCH v2] " Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1570766721-4242-1-git-send-email-viveksharma@marvell.com \
    --to=viveksharma@marvell.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=intoviveksharma@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).