From: Anoob Joseph <anoobj@marvell.com>
To: Akhil Goyal <akhil.goyal@nxp.com>,
Pablo de Lara <pablo.de.lara.guarch@intel.com>
Cc: Anoob Joseph <anoobj@marvell.com>,
Fiona Trahe <fiona.trahe@intel.com>,
Jerin Jacob <jerinj@marvell.com>,
Narayana Prasad <pathreya@marvell.com>,
Shally Verma <shallyv@marvell.com>,
Ankur Dwivedi <adwivedi@marvell.com>,
Kanaka Durga Kotamarthy <kkotamarthy@marvell.com>,
Sunila Sahu <ssahu@marvell.com>,
Tejasree Kondoj <ktejasree@marvell.com>, <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v2 07/12] crypto/octeontx2: add enqueue/dequeue ops
Date: Sun, 13 Oct 2019 18:09:57 +0530 [thread overview]
Message-ID: <1570970402-20278-8-git-send-email-anoobj@marvell.com> (raw)
In-Reply-To: <1570970402-20278-1-git-send-email-anoobj@marvell.com>
This patch adds the enqueue burst and dequeue burst callbacks for the
OCTEON TX2 crypto driver.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
---
drivers/common/cpt/cpt_hw_types.h | 52 ++++
drivers/crypto/octeontx2/Makefile | 1 +
drivers/crypto/octeontx2/meson.build | 1 +
.../crypto/octeontx2/otx2_cryptodev_hw_access.h | 16 ++
drivers/crypto/octeontx2/otx2_cryptodev_ops.c | 289 +++++++++++++++++++++
5 files changed, 359 insertions(+)
diff --git a/drivers/common/cpt/cpt_hw_types.h b/drivers/common/cpt/cpt_hw_types.h
index 4c2893b..e2b127d 100644
--- a/drivers/common/cpt/cpt_hw_types.h
+++ b/drivers/common/cpt/cpt_hw_types.h
@@ -197,6 +197,44 @@ typedef union cpt_inst_s {
};
#endif /* Word 7 - End */
} s8x;
+ struct cpt_inst_s_9s {
+#if (RTE_BYTE_ORDER == RTE_BIG_ENDIAN) /* Word 0 - Big Endian */
+ uint64_t nixtx_addr : 60;
+ uint64_t doneint : 1;
+ uint64_t nixtxl : 3;
+#else /* Word 0 - Little Endian */
+ uint64_t nixtxl : 3;
+ uint64_t doneint : 1;
+ uint64_t nixtx_addr : 60;
+#endif /* Word 0 - End */
+ uint64_t res_addr;
+#if (RTE_BYTE_ORDER == RTE_BIG_ENDIAN) /* Word 2 - Big Endian */
+ uint64_t rvu_pf_func : 16;
+ uint64_t reserved_172_175 : 4;
+ uint64_t grp : 10;
+ uint64_t tt : 2;
+ uint64_t tag : 32;
+#else /* Word 2 - Little Endian */
+ uint64_t tag : 32;
+ uint64_t tt : 2;
+ uint64_t grp : 10;
+ uint64_t reserved_172_175 : 4;
+ uint64_t rvu_pf_func : 16;
+#endif /* Word 2 - End */
+#if (RTE_BYTE_ORDER == RTE_BIG_ENDIAN) /* Word 3 - Big Endian */
+ uint64_t wq_ptr : 61;
+ uint64_t reserved_194_193 : 2;
+ uint64_t qord : 1;
+#else /* Word 3 - Little Endian */
+ uint64_t qord : 1;
+ uint64_t reserved_194_193 : 2;
+ uint64_t wq_ptr : 61;
+#endif /* Word 3 - End */
+ uint64_t ei0;
+ uint64_t ei1;
+ uint64_t ei2;
+ uint64_t ei3;
+ } s9x;
} cpt_inst_s_t;
/**
@@ -243,6 +281,20 @@ typedef union cpt_res_s {
uint64_t reserved_64_127 : 64;
#endif /* Word 1 - End */
} s8x;
+ struct cpt_res_s_9s {
+#if (RTE_BYTE_ORDER == RTE_BIG_ENDIAN) /* Word 0 - Big Endian */
+ uint64_t reserved_17_63:47;
+ uint64_t doneint:1;
+ uint64_t uc_compcode:8;
+ uint64_t compcode:8;
+#else /* Word 0 - Little Endian */
+ uint64_t compcode:8;
+ uint64_t uc_compcode:8;
+ uint64_t doneint:1;
+ uint64_t reserved_17_63:47;
+#endif /* Word 0 - End */
+ uint64_t reserved_64_127;
+ } s9x;
} cpt_res_s_t;
/**
diff --git a/drivers/crypto/octeontx2/Makefile b/drivers/crypto/octeontx2/Makefile
index 968efac..ce116b8 100644
--- a/drivers/crypto/octeontx2/Makefile
+++ b/drivers/crypto/octeontx2/Makefile
@@ -24,6 +24,7 @@ CFLAGS += -O3
CFLAGS += -I$(RTE_SDK)/drivers/common/cpt
CFLAGS += -I$(RTE_SDK)/drivers/common/octeontx2
CFLAGS += -I$(RTE_SDK)/drivers/mempool/octeontx2
+CFLAGS += -DALLOW_EXPERIMENTAL_API
ifneq ($(CONFIG_RTE_ARCH_64),y)
CFLAGS += -Wno-int-to-pointer-cast
diff --git a/drivers/crypto/octeontx2/meson.build b/drivers/crypto/octeontx2/meson.build
index ee2e907..b6e5b73 100644
--- a/drivers/crypto/octeontx2/meson.build
+++ b/drivers/crypto/octeontx2/meson.build
@@ -10,6 +10,7 @@ deps += ['common_cpt']
deps += ['common_octeontx2']
name = 'octeontx2_crypto'
+allow_experimental_apis = true
sources = files('otx2_cryptodev.c',
'otx2_cryptodev_capabilities.c',
'otx2_cryptodev_hw_access.c',
diff --git a/drivers/crypto/octeontx2/otx2_cryptodev_hw_access.h b/drivers/crypto/octeontx2/otx2_cryptodev_hw_access.h
index 87d4e77..6f78aa4 100644
--- a/drivers/crypto/octeontx2/otx2_cryptodev_hw_access.h
+++ b/drivers/crypto/octeontx2/otx2_cryptodev_hw_access.h
@@ -12,6 +12,7 @@
#include "cpt_common.h"
#include "cpt_hw_types.h"
+#include "cpt_mcode_defines.h"
#include "otx2_dev.h"
@@ -119,6 +120,21 @@ union otx2_cpt_lf_q_grp_ptr {
} s;
};
+/*
+ * Enumeration cpt_9x_comp_e
+ *
+ * CPT 9X Completion Enumeration
+ * Enumerates the values of CPT_RES_S[COMPCODE].
+ */
+enum cpt_9x_comp_e {
+ CPT_9X_COMP_E_NOTDONE = 0x00,
+ CPT_9X_COMP_E_GOOD = 0x01,
+ CPT_9X_COMP_E_FAULT = 0x02,
+ CPT_9X_COMP_E_HWERR = 0x04,
+ CPT_9X_COMP_E_INSTERR = 0x05,
+ CPT_9X_COMP_E_LAST_ENTRY = 0x06
+};
+
struct otx2_cpt_qp {
uint32_t id;
/**< Queue pair id */
diff --git a/drivers/crypto/octeontx2/otx2_cryptodev_ops.c b/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
index d4dc1de..ef6e7e7 100644
--- a/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
+++ b/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
@@ -329,6 +329,292 @@ sym_session_clear(int driver_id, struct rte_cryptodev_sym_session *sess)
rte_mempool_put(pool, priv);
}
+static __rte_always_inline int32_t __hot
+otx2_cpt_enqueue_req(const struct otx2_cpt_qp *qp,
+ struct pending_queue *pend_q,
+ struct cpt_request_info *req)
+{
+ void *lmtline = qp->lmtline;
+ union cpt_inst_s inst;
+ uint64_t lmt_status;
+
+ if (unlikely(pend_q->pending_count >= OTX2_CPT_DEFAULT_CMD_QLEN))
+ return -EAGAIN;
+
+ inst.u[0] = 0;
+ inst.s9x.res_addr = req->comp_baddr;
+ inst.u[2] = 0;
+ inst.u[3] = 0;
+
+ inst.s9x.ei0 = req->ist.ei0;
+ inst.s9x.ei1 = req->ist.ei1;
+ inst.s9x.ei2 = req->ist.ei2;
+ inst.s9x.ei3 = req->ist.ei3;
+
+ req->time_out = rte_get_timer_cycles() +
+ DEFAULT_COMMAND_TIMEOUT * rte_get_timer_hz();
+
+ do {
+ /* Copy CPT command to LMTLINE */
+ memcpy(lmtline, &inst, sizeof(inst));
+
+ /*
+ * Make sure compiler does not reorder memcpy and ldeor.
+ * LMTST transactions are always flushed from the write
+ * buffer immediately, a DMB is not required to push out
+ * LMTSTs.
+ */
+ rte_cio_wmb();
+ lmt_status = otx2_lmt_submit(qp->lf_nq_reg);
+ } while (lmt_status == 0);
+
+ pend_q->rid_queue[pend_q->enq_tail].rid = (uintptr_t)req;
+
+ /* We will use soft queue length here to limit requests */
+ MOD_INC(pend_q->enq_tail, OTX2_CPT_DEFAULT_CMD_QLEN);
+ pend_q->pending_count += 1;
+
+ return 0;
+}
+
+static __rte_always_inline int __hot
+otx2_cpt_enqueue_sym(struct otx2_cpt_qp *qp, struct rte_crypto_op *op,
+ struct pending_queue *pend_q)
+{
+ struct rte_crypto_sym_op *sym_op = op->sym;
+ struct cpt_request_info *req;
+ struct cpt_sess_misc *sess;
+ vq_cmd_word3_t *w3;
+ uint64_t cpt_op;
+ void *mdata;
+ int ret;
+
+ sess = get_sym_session_private_data(sym_op->session,
+ otx2_cryptodev_driver_id);
+
+ cpt_op = sess->cpt_op;
+
+ if (cpt_op & CPT_OP_CIPHER_MASK)
+ ret = fill_fc_params(op, sess, &qp->meta_info, &mdata,
+ (void **)&req);
+ else
+ ret = fill_digest_params(op, sess, &qp->meta_info, &mdata,
+ (void **)&req);
+
+ if (unlikely(ret)) {
+ CPT_LOG_DP_ERR("Crypto req : op %p, cpt_op 0x%x ret 0x%x",
+ op, (unsigned int)cpt_op, ret);
+ return ret;
+ }
+
+ w3 = ((vq_cmd_word3_t *)(&req->ist.ei3));
+ w3->s.grp = sess->egrp;
+
+ ret = otx2_cpt_enqueue_req(qp, pend_q, req);
+
+ if (unlikely(ret)) {
+ /* Free buffer allocated by fill params routines */
+ free_op_meta(mdata, qp->meta_info.pool);
+ }
+
+ return ret;
+}
+
+static __rte_always_inline int __hot
+otx2_cpt_enqueue_sym_sessless(struct otx2_cpt_qp *qp, struct rte_crypto_op *op,
+ struct pending_queue *pend_q)
+{
+ const int driver_id = otx2_cryptodev_driver_id;
+ struct rte_crypto_sym_op *sym_op = op->sym;
+ struct rte_cryptodev_sym_session *sess;
+ int ret;
+
+ /* Create temporary session */
+
+ if (rte_mempool_get(qp->sess_mp, (void **)&sess))
+ return -ENOMEM;
+
+ ret = sym_session_configure(driver_id, sym_op->xform, sess,
+ qp->sess_mp_priv);
+ if (ret)
+ goto sess_put;
+
+ sym_op->session = sess;
+
+ ret = otx2_cpt_enqueue_sym(qp, op, pend_q);
+
+ if (unlikely(ret))
+ goto priv_put;
+
+ return 0;
+
+priv_put:
+ sym_session_clear(driver_id, sess);
+sess_put:
+ rte_mempool_put(qp->sess_mp, sess);
+ return ret;
+}
+
+static uint16_t
+otx2_cpt_enqueue_burst(void *qptr, struct rte_crypto_op **ops, uint16_t nb_ops)
+{
+ uint16_t nb_allowed, count = 0;
+ struct otx2_cpt_qp *qp = qptr;
+ struct pending_queue *pend_q;
+ struct rte_crypto_op *op;
+ int ret;
+
+ pend_q = &qp->pend_q;
+
+ nb_allowed = OTX2_CPT_DEFAULT_CMD_QLEN - pend_q->pending_count;
+ if (nb_ops > nb_allowed)
+ nb_ops = nb_allowed;
+
+ for (count = 0; count < nb_ops; count++) {
+ op = ops[count];
+ if (op->type == RTE_CRYPTO_OP_TYPE_SYMMETRIC) {
+ if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION)
+ ret = otx2_cpt_enqueue_sym(qp, op, pend_q);
+ else
+ ret = otx2_cpt_enqueue_sym_sessless(qp, op,
+ pend_q);
+ } else
+ break;
+
+ if (unlikely(ret))
+ break;
+ }
+
+ return count;
+}
+
+static inline void
+otx2_cpt_dequeue_post_process(struct otx2_cpt_qp *qp, struct rte_crypto_op *cop,
+ uintptr_t *rsp, uint8_t cc)
+{
+ if (cop->type == RTE_CRYPTO_OP_TYPE_SYMMETRIC) {
+ if (likely(cc == NO_ERR)) {
+ /* Verify authentication data if required */
+ if (unlikely(rsp[2]))
+ compl_auth_verify(cop, (uint8_t *)rsp[2],
+ rsp[3]);
+ else
+ cop->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+ } else {
+ if (cc == ERR_GC_ICV_MISCOMPARE)
+ cop->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+ else
+ cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ }
+
+ if (unlikely(cop->sess_type == RTE_CRYPTO_OP_SESSIONLESS)) {
+ sym_session_clear(otx2_cryptodev_driver_id,
+ cop->sym->session);
+ rte_mempool_put(qp->sess_mp, cop->sym->session);
+ cop->sym->session = NULL;
+ }
+ }
+}
+
+static __rte_always_inline uint8_t
+otx2_cpt_compcode_get(struct cpt_request_info *req)
+{
+ volatile struct cpt_res_s_9s *res;
+ uint8_t ret;
+
+ res = (volatile struct cpt_res_s_9s *)req->completion_addr;
+
+ if (unlikely(res->compcode == CPT_9X_COMP_E_NOTDONE)) {
+ if (rte_get_timer_cycles() < req->time_out)
+ return ERR_REQ_PENDING;
+
+ CPT_LOG_DP_ERR("Request timed out");
+ return ERR_REQ_TIMEOUT;
+ }
+
+ if (likely(res->compcode == CPT_9X_COMP_E_GOOD)) {
+ ret = NO_ERR;
+ if (unlikely(res->uc_compcode)) {
+ ret = res->uc_compcode;
+ CPT_LOG_DP_DEBUG("Request failed with microcode error");
+ CPT_LOG_DP_DEBUG("MC completion code 0x%x",
+ res->uc_compcode);
+ }
+ } else {
+ CPT_LOG_DP_DEBUG("HW completion code 0x%x", res->compcode);
+
+ ret = res->compcode;
+ switch (res->compcode) {
+ case CPT_9X_COMP_E_INSTERR:
+ CPT_LOG_DP_ERR("Request failed with instruction error");
+ break;
+ case CPT_9X_COMP_E_FAULT:
+ CPT_LOG_DP_ERR("Request failed with DMA fault");
+ break;
+ case CPT_9X_COMP_E_HWERR:
+ CPT_LOG_DP_ERR("Request failed with hardware error");
+ break;
+ default:
+ CPT_LOG_DP_ERR("Request failed with unknown completion code");
+ }
+ }
+
+ return ret;
+}
+
+static uint16_t
+otx2_cpt_dequeue_burst(void *qptr, struct rte_crypto_op **ops, uint16_t nb_ops)
+{
+ int i, nb_pending, nb_completed;
+ struct otx2_cpt_qp *qp = qptr;
+ struct pending_queue *pend_q;
+ struct cpt_request_info *req;
+ struct rte_crypto_op *cop;
+ uint8_t cc[nb_ops];
+ struct rid *rid;
+ uintptr_t *rsp;
+ void *metabuf;
+
+ pend_q = &qp->pend_q;
+
+ nb_pending = pend_q->pending_count;
+
+ if (nb_ops > nb_pending)
+ nb_ops = nb_pending;
+
+ for (i = 0; i < nb_ops; i++) {
+ rid = &pend_q->rid_queue[pend_q->deq_head];
+ req = (struct cpt_request_info *)(rid->rid);
+
+ cc[i] = otx2_cpt_compcode_get(req);
+
+ if (unlikely(cc[i] == ERR_REQ_PENDING))
+ break;
+
+ ops[i] = req->op;
+
+ MOD_INC(pend_q->deq_head, OTX2_CPT_DEFAULT_CMD_QLEN);
+ pend_q->pending_count -= 1;
+ }
+
+ nb_completed = i;
+
+ for (i = 0; i < nb_completed; i++) {
+ rsp = (void *)ops[i];
+
+ metabuf = (void *)rsp[0];
+ cop = (void *)rsp[1];
+
+ ops[i] = cop;
+
+ otx2_cpt_dequeue_post_process(qp, cop, rsp, cc[i]);
+
+ free_op_meta(metabuf, qp->meta_info.pool);
+ }
+
+ return nb_completed;
+}
+
/* PMD ops */
static int
@@ -378,6 +664,9 @@ otx2_cpt_dev_config(struct rte_cryptodev *dev,
goto queues_detach;
}
+ dev->enqueue_burst = otx2_cpt_enqueue_burst;
+ dev->dequeue_burst = otx2_cpt_dequeue_burst;
+
rte_mb();
return 0;
--
2.7.4
next prev parent reply other threads:[~2019-10-13 12:41 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-30 6:28 [dpdk-dev] [PATCH 00/11] add OCTEON TX2 crypto PMD Anoob Joseph
2019-08-30 6:28 ` [dpdk-dev] [PATCH 01/11] crypto/octeontx2: add PMD skeleton Anoob Joseph
2019-10-04 11:21 ` Akhil Goyal
2019-10-05 7:06 ` Anoob Joseph
2019-08-30 6:28 ` [dpdk-dev] [PATCH 02/11] crypto/octeontx2: add device init sequence in probe Anoob Joseph
2019-08-30 6:28 ` [dpdk-dev] [PATCH 03/11] crypto/octeontx2: add device control ops Anoob Joseph
2019-08-30 6:28 ` [dpdk-dev] [PATCH 04/11] crypto/octeontx2: add symmetric capabilities Anoob Joseph
2019-08-30 6:28 ` [dpdk-dev] [PATCH 05/11] crypto/octeontx2: add hardware definitions Anoob Joseph
2019-08-30 6:28 ` [dpdk-dev] [PATCH 06/11] crypto/octeontx2: add queue pair functions Anoob Joseph
2019-08-30 6:28 ` [dpdk-dev] [PATCH 07/11] crypto/octeontx2: add session related functions Anoob Joseph
2019-08-30 6:28 ` [dpdk-dev] [PATCH 08/11] crypto/octeontx2: add enqueue burst Anoob Joseph
2019-08-30 6:28 ` [dpdk-dev] [PATCH 09/11] crypto/octeontx2: add dequeue burst Anoob Joseph
2019-08-30 6:28 ` [dpdk-dev] [PATCH 10/11] test: add OCTEON TX2 tests Anoob Joseph
2019-08-30 6:28 ` [dpdk-dev] [PATCH 11/11] doc: add documentation for OCTEON TX2 crypto PMD Anoob Joseph
2019-09-03 5:22 ` Jerin Jacob Kollanukkaran
2019-09-03 11:18 ` Anoob Joseph
2019-09-03 17:42 ` Thomas Monjalon
2019-09-04 11:07 ` Anoob Joseph
2019-09-04 11:03 ` Jerin Jacob Kollanukkaran
2019-09-26 11:03 ` [dpdk-dev] [PATCH 00/11] add " Anoob Joseph
2019-09-27 7:51 ` Akhil Goyal
2019-10-13 12:39 ` [dpdk-dev] [PATCH v2 00/12] " Anoob Joseph
2019-10-13 12:39 ` [dpdk-dev] [PATCH v2 01/12] crypto/octeontx2: add PMD skeleton Anoob Joseph
2019-10-15 7:56 ` Akhil Goyal
2019-10-15 8:44 ` Anoob Joseph
2019-10-13 12:39 ` [dpdk-dev] [PATCH v2 02/12] crypto/octeontx2: add device init sequence in probe Anoob Joseph
2019-10-13 12:39 ` [dpdk-dev] [PATCH v2 03/12] crypto/octeontx2: add device control ops Anoob Joseph
2019-10-13 12:39 ` [dpdk-dev] [PATCH v2 04/12] crypto/octeontx2: add queue pair functions Anoob Joseph
2019-10-13 12:39 ` [dpdk-dev] [PATCH v2 05/12] crypto/octeontx2: add symmetric capabilities Anoob Joseph
2019-10-13 12:39 ` [dpdk-dev] [PATCH v2 06/12] crypto/octeontx2: add session related functions Anoob Joseph
2019-10-13 12:39 ` Anoob Joseph [this message]
2019-10-15 11:19 ` [dpdk-dev] [PATCH v2 07/12] crypto/octeontx2: add enqueue/dequeue ops Gavin Hu (Arm Technology China)
2019-10-16 9:57 ` Anoob Joseph
2019-10-13 12:39 ` [dpdk-dev] [PATCH v2 08/12] test: add OCTEON TX2 tests Anoob Joseph
2019-10-13 12:39 ` [dpdk-dev] [PATCH v2 09/12] crypto/octeontx2: allocate memory for asymmetric operation Anoob Joseph
2019-10-13 12:40 ` [dpdk-dev] [PATCH v2 10/12] crypto/octeontx2: add asymmetric session operations Anoob Joseph
2019-10-13 12:40 ` [dpdk-dev] [PATCH v2 11/12] crypto/octeontx2: add asymmetric in enqueue/dequeue ops Anoob Joseph
2019-10-13 12:40 ` [dpdk-dev] [PATCH v2 12/12] app/test: register octeontx2 PMD to asym testsuite Anoob Joseph
2019-10-16 13:32 ` [dpdk-dev] [PATCH v2 00/12] add OCTEON TX2 crypto PMD Akhil Goyal
2019-10-16 13:39 ` Anoob Joseph
2019-10-16 15:25 ` [dpdk-dev] [PATCH v3 00/11] " Anoob Joseph
2019-10-16 15:25 ` [dpdk-dev] [PATCH v3 01/11] crypto/octeontx2: add PMD skeleton Anoob Joseph
2019-10-16 15:25 ` [dpdk-dev] [PATCH v3 02/11] crypto/octeontx2: add device init sequence in probe Anoob Joseph
2019-10-16 15:25 ` [dpdk-dev] [PATCH v3 03/11] crypto/octeontx2: add device control ops Anoob Joseph
2019-10-16 15:25 ` [dpdk-dev] [PATCH v3 04/11] crypto/octeontx2: add queue pair functions Anoob Joseph
2019-10-16 15:25 ` [dpdk-dev] [PATCH v3 05/11] crypto/octeontx2: add symmetric capabilities Anoob Joseph
2019-10-16 15:25 ` [dpdk-dev] [PATCH v3 06/11] crypto/octeontx2: add session related functions Anoob Joseph
2019-10-16 15:25 ` [dpdk-dev] [PATCH v3 07/11] crypto/octeontx2: add enqueue/dequeue ops Anoob Joseph
2019-10-16 15:25 ` [dpdk-dev] [PATCH v3 08/11] test: add OCTEON TX2 tests Anoob Joseph
2019-10-16 15:25 ` [dpdk-dev] [PATCH v3 09/11] crypto/octeontx2: add asymmetric session operations Anoob Joseph
2019-10-16 15:25 ` [dpdk-dev] [PATCH v3 10/11] crypto/octeontx2: add asymmetric in enqueue/dequeue ops Anoob Joseph
2019-10-16 15:25 ` [dpdk-dev] [PATCH v3 11/11] app/test: register octeontx2 PMD to asym testsuite Anoob Joseph
2019-10-17 9:48 ` [dpdk-dev] [PATCH v3 00/11] add OCTEON TX2 crypto PMD Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1570970402-20278-8-git-send-email-anoobj@marvell.com \
--to=anoobj@marvell.com \
--cc=adwivedi@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=fiona.trahe@intel.com \
--cc=jerinj@marvell.com \
--cc=kkotamarthy@marvell.com \
--cc=ktejasree@marvell.com \
--cc=pablo.de.lara.guarch@intel.com \
--cc=pathreya@marvell.com \
--cc=shallyv@marvell.com \
--cc=ssahu@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).