* Re: [dpdk-dev] net/ixgbe:fix wrong link status
2019-09-02 11:52 [dpdk-dev] net/ixgbe:fix wrong link status Zhang Xiao
@ 2019-09-02 3:28 ` Zhao1, Wei
2019-09-02 9:00 ` Ye Xiaolong
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Zhao1, Wei @ 2019-09-02 3:28 UTC (permalink / raw)
To: Zhang, Xiao, dev; +Cc: stable
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
> -----Original Message-----
> From: Zhang, Xiao
> Sent: Monday, September 2, 2019 7:52 PM
> To: dev@dpdk.org
> Cc: Zhao1, Wei <wei.zhao1@intel.com>; Zhang, Xiao <xiao.zhang@intel.com>;
> stable@dpdk.org
> Subject: net/ixgbe:fix wrong link status
>
> The link status for 82599eb got from link status register was not correct, check
> the enable/disable flag of tx laser when getting the link status, set the link
> status down if tx laser disabled since the tx laser flag could be set correctly
> when up/down the link status.
>
> Fixes: dc66e5fd01b9 ("net/ixgbe: improve link state check on VF")
> Cc: stable@dpdk.org
>
> Signed-off-by: Zhang Xiao <xiao.zhang@intel.com>
> ---
> drivers/net/ixgbe/ixgbe_ethdev.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
> b/drivers/net/ixgbe/ixgbe_ethdev.c
> index 87d2ad0..fc06a1a 100644
> --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> @@ -2864,6 +2864,7 @@ ixgbe_dev_set_link_up(struct rte_eth_dev *dev)
> } else {
> /* Turn on the laser */
> ixgbe_enable_tx_laser(hw);
> + ixgbe_dev_link_update(dev, 0);
> }
>
> return 0;
> @@ -2894,6 +2895,7 @@ ixgbe_dev_set_link_down(struct rte_eth_dev *dev)
> } else {
> /* Turn off the laser */
> ixgbe_disable_tx_laser(hw);
> + ixgbe_dev_link_update(dev, 0);
> }
>
> return 0;
> @@ -3967,6 +3969,7 @@ ixgbe_dev_link_update_share(struct rte_eth_dev
> *dev,
> u32 speed = 0;
> int wait = 1;
> bool autoneg = false;
> + u32 esdp_reg;
>
> memset(&link, 0, sizeof(link));
> link.link_status = ETH_LINK_DOWN;
> @@ -3999,6 +4002,10 @@ ixgbe_dev_link_update_share(struct rte_eth_dev
> *dev,
> return rte_eth_linkstatus_set(dev, &link);
> }
>
> + esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
> + if ((esdp_reg & IXGBE_ESDP_SDP3))
> + link_up = 0;
> +
> if (link_up == 0) {
> intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
> return rte_eth_linkstatus_set(dev, &link);
> --
> 2.7.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] net/ixgbe:fix wrong link status
2019-09-02 11:52 [dpdk-dev] net/ixgbe:fix wrong link status Zhang Xiao
2019-09-02 3:28 ` Zhao1, Wei
@ 2019-09-02 9:00 ` Ye Xiaolong
2019-09-02 9:54 ` Ye Xiaolong
2019-10-29 5:33 ` [dpdk-dev] [v2] " Xiao Zhang
3 siblings, 0 replies; 6+ messages in thread
From: Ye Xiaolong @ 2019-09-02 9:00 UTC (permalink / raw)
To: Zhang Xiao; +Cc: dev, wei.zhao1, stable
Hi, Xiao
On 09/02, Zhang Xiao wrote:
>The link status for 82599eb got from link status register was not correct,
So there is a HW issue, right?
Thanks,
Xiaolong
>check the enable/disable flag of tx laser when getting the link status,
>set the link status down if tx laser disabled since the tx laser flag
>could be set correctly when up/down the link status.
>
>Fixes: dc66e5fd01b9 ("net/ixgbe: improve link state check on VF")
>Cc: stable@dpdk.org
>
>Signed-off-by: Zhang Xiao <xiao.zhang@intel.com>
>---
> drivers/net/ixgbe/ixgbe_ethdev.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
>diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
>index 87d2ad0..fc06a1a 100644
>--- a/drivers/net/ixgbe/ixgbe_ethdev.c
>+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
>@@ -2864,6 +2864,7 @@ ixgbe_dev_set_link_up(struct rte_eth_dev *dev)
> } else {
> /* Turn on the laser */
> ixgbe_enable_tx_laser(hw);
>+ ixgbe_dev_link_update(dev, 0);
> }
>
> return 0;
>@@ -2894,6 +2895,7 @@ ixgbe_dev_set_link_down(struct rte_eth_dev *dev)
> } else {
> /* Turn off the laser */
> ixgbe_disable_tx_laser(hw);
>+ ixgbe_dev_link_update(dev, 0);
> }
>
> return 0;
>@@ -3967,6 +3969,7 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
> u32 speed = 0;
> int wait = 1;
> bool autoneg = false;
>+ u32 esdp_reg;
>
> memset(&link, 0, sizeof(link));
> link.link_status = ETH_LINK_DOWN;
>@@ -3999,6 +4002,10 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
> return rte_eth_linkstatus_set(dev, &link);
> }
>
>+ esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
>+ if ((esdp_reg & IXGBE_ESDP_SDP3))
>+ link_up = 0;
>+
> if (link_up == 0) {
> intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
> return rte_eth_linkstatus_set(dev, &link);
>--
>2.7.4
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] net/ixgbe:fix wrong link status
2019-09-02 11:52 [dpdk-dev] net/ixgbe:fix wrong link status Zhang Xiao
2019-09-02 3:28 ` Zhao1, Wei
2019-09-02 9:00 ` Ye Xiaolong
@ 2019-09-02 9:54 ` Ye Xiaolong
2019-10-29 5:33 ` [dpdk-dev] [v2] " Xiao Zhang
3 siblings, 0 replies; 6+ messages in thread
From: Ye Xiaolong @ 2019-09-02 9:54 UTC (permalink / raw)
To: Zhang Xiao; +Cc: dev, wei.zhao1, stable
Hi, Xiao
This patch failed to apply on top of dpdk-next-net-intel/for-next-net, could
you help to do a rebase?
Thanks,
Xiaolong
On 09/02, Zhang Xiao wrote:
>The link status for 82599eb got from link status register was not correct,
>check the enable/disable flag of tx laser when getting the link status,
>set the link status down if tx laser disabled since the tx laser flag
>could be set correctly when up/down the link status.
>
>Fixes: dc66e5fd01b9 ("net/ixgbe: improve link state check on VF")
>Cc: stable@dpdk.org
>
>Signed-off-by: Zhang Xiao <xiao.zhang@intel.com>
>---
> drivers/net/ixgbe/ixgbe_ethdev.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
>diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
>index 87d2ad0..fc06a1a 100644
>--- a/drivers/net/ixgbe/ixgbe_ethdev.c
>+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
>@@ -2864,6 +2864,7 @@ ixgbe_dev_set_link_up(struct rte_eth_dev *dev)
> } else {
> /* Turn on the laser */
> ixgbe_enable_tx_laser(hw);
>+ ixgbe_dev_link_update(dev, 0);
> }
>
> return 0;
>@@ -2894,6 +2895,7 @@ ixgbe_dev_set_link_down(struct rte_eth_dev *dev)
> } else {
> /* Turn off the laser */
> ixgbe_disable_tx_laser(hw);
>+ ixgbe_dev_link_update(dev, 0);
> }
>
> return 0;
>@@ -3967,6 +3969,7 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
> u32 speed = 0;
> int wait = 1;
> bool autoneg = false;
>+ u32 esdp_reg;
>
> memset(&link, 0, sizeof(link));
> link.link_status = ETH_LINK_DOWN;
>@@ -3999,6 +4002,10 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
> return rte_eth_linkstatus_set(dev, &link);
> }
>
>+ esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
>+ if ((esdp_reg & IXGBE_ESDP_SDP3))
>+ link_up = 0;
>+
> if (link_up == 0) {
> intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
> return rte_eth_linkstatus_set(dev, &link);
>--
>2.7.4
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [dpdk-dev] net/ixgbe:fix wrong link status
@ 2019-09-02 11:52 Zhang Xiao
2019-09-02 3:28 ` Zhao1, Wei
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Zhang Xiao @ 2019-09-02 11:52 UTC (permalink / raw)
To: dev; +Cc: wei.zhao1, Zhang Xiao, stable
The link status for 82599eb got from link status register was not correct,
check the enable/disable flag of tx laser when getting the link status,
set the link status down if tx laser disabled since the tx laser flag
could be set correctly when up/down the link status.
Fixes: dc66e5fd01b9 ("net/ixgbe: improve link state check on VF")
Cc: stable@dpdk.org
Signed-off-by: Zhang Xiao <xiao.zhang@intel.com>
---
drivers/net/ixgbe/ixgbe_ethdev.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 87d2ad0..fc06a1a 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -2864,6 +2864,7 @@ ixgbe_dev_set_link_up(struct rte_eth_dev *dev)
} else {
/* Turn on the laser */
ixgbe_enable_tx_laser(hw);
+ ixgbe_dev_link_update(dev, 0);
}
return 0;
@@ -2894,6 +2895,7 @@ ixgbe_dev_set_link_down(struct rte_eth_dev *dev)
} else {
/* Turn off the laser */
ixgbe_disable_tx_laser(hw);
+ ixgbe_dev_link_update(dev, 0);
}
return 0;
@@ -3967,6 +3969,7 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
u32 speed = 0;
int wait = 1;
bool autoneg = false;
+ u32 esdp_reg;
memset(&link, 0, sizeof(link));
link.link_status = ETH_LINK_DOWN;
@@ -3999,6 +4002,10 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
return rte_eth_linkstatus_set(dev, &link);
}
+ esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if ((esdp_reg & IXGBE_ESDP_SDP3))
+ link_up = 0;
+
if (link_up == 0) {
intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
return rte_eth_linkstatus_set(dev, &link);
--
2.7.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* [dpdk-dev] [v2] net/ixgbe:fix wrong link status
2019-09-02 11:52 [dpdk-dev] net/ixgbe:fix wrong link status Zhang Xiao
` (2 preceding siblings ...)
2019-09-02 9:54 ` Ye Xiaolong
@ 2019-10-29 5:33 ` Xiao Zhang
2019-11-04 5:32 ` Ye Xiaolong
3 siblings, 1 reply; 6+ messages in thread
From: Xiao Zhang @ 2019-10-29 5:33 UTC (permalink / raw)
To: dev; +Cc: wei.zhao1, xiaolong.ye, Xiao Zhang, stable
The link status for 82599eb got from link status register was not correct,
check the enable/disable flag of tx laser when getting the link status,
set the link status down if tx laser disabled since the tx laser flag
could be set correctly when up/down the link status.
Fixes: dc66e5fd01b9 ("net/ixgbe: improve link state check on VF")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
---
v2
Rebase the patch to latest master code.
---
drivers/net/ixgbe/ixgbe_ethdev.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index dbce7a8..3202c28 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -2904,6 +2904,7 @@ ixgbe_dev_set_link_up(struct rte_eth_dev *dev)
} else {
/* Turn on the laser */
ixgbe_enable_tx_laser(hw);
+ ixgbe_dev_link_update(dev, 0);
}
return 0;
@@ -2934,6 +2935,7 @@ ixgbe_dev_set_link_down(struct rte_eth_dev *dev)
} else {
/* Turn off the laser */
ixgbe_disable_tx_laser(hw);
+ ixgbe_dev_link_update(dev, 0);
}
return 0;
@@ -4108,6 +4110,7 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
int link_up;
int diag;
int wait = 1;
+ u32 esdp_reg;
memset(&link, 0, sizeof(link));
link.link_status = ETH_LINK_DOWN;
@@ -4135,6 +4138,10 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
return rte_eth_linkstatus_set(dev, &link);
}
+ esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if ((esdp_reg & IXGBE_ESDP_SDP3))
+ link_up = 0;
+
if (link_up == 0) {
if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
--
2.7.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [v2] net/ixgbe:fix wrong link status
2019-10-29 5:33 ` [dpdk-dev] [v2] " Xiao Zhang
@ 2019-11-04 5:32 ` Ye Xiaolong
0 siblings, 0 replies; 6+ messages in thread
From: Ye Xiaolong @ 2019-11-04 5:32 UTC (permalink / raw)
To: Xiao Zhang; +Cc: dev, wei.zhao1, stable
On 10/29, Xiao Zhang wrote:
>The link status for 82599eb got from link status register was not correct,
>check the enable/disable flag of tx laser when getting the link status,
>set the link status down if tx laser disabled since the tx laser flag
>could be set correctly when up/down the link status.
>
>Fixes: dc66e5fd01b9 ("net/ixgbe: improve link state check on VF")
>Cc: stable@dpdk.org
>
>Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
>Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
>---
>v2
>Rebase the patch to latest master code.
>---
> drivers/net/ixgbe/ixgbe_ethdev.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
>diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
>index dbce7a8..3202c28 100644
>--- a/drivers/net/ixgbe/ixgbe_ethdev.c
>+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
>@@ -2904,6 +2904,7 @@ ixgbe_dev_set_link_up(struct rte_eth_dev *dev)
> } else {
> /* Turn on the laser */
> ixgbe_enable_tx_laser(hw);
>+ ixgbe_dev_link_update(dev, 0);
> }
>
> return 0;
>@@ -2934,6 +2935,7 @@ ixgbe_dev_set_link_down(struct rte_eth_dev *dev)
> } else {
> /* Turn off the laser */
> ixgbe_disable_tx_laser(hw);
>+ ixgbe_dev_link_update(dev, 0);
> }
>
> return 0;
>@@ -4108,6 +4110,7 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
> int link_up;
> int diag;
> int wait = 1;
>+ u32 esdp_reg;
>
> memset(&link, 0, sizeof(link));
> link.link_status = ETH_LINK_DOWN;
>@@ -4135,6 +4138,10 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
> return rte_eth_linkstatus_set(dev, &link);
> }
>
>+ esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
>+ if ((esdp_reg & IXGBE_ESDP_SDP3))
>+ link_up = 0;
>+
> if (link_up == 0) {
> if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
> intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
>--
>2.7.4
>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Applied to dpdk-next-net-intel. Thanks.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-11-04 5:36 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-02 11:52 [dpdk-dev] net/ixgbe:fix wrong link status Zhang Xiao
2019-09-02 3:28 ` Zhao1, Wei
2019-09-02 9:00 ` Ye Xiaolong
2019-09-02 9:54 ` Ye Xiaolong
2019-10-29 5:33 ` [dpdk-dev] [v2] " Xiao Zhang
2019-11-04 5:32 ` Ye Xiaolong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).