[dpdk-dev] [PATCH] net/mlx5: add ConnectX6-DX device id

[dpdk-dev] [PATCH] net/mlx5: add ConnectX6-DX device id

[Raslan Darawsheh]

This adds new device id to the list of Mellanox devices
that runs mlx5 PMD.
	- ConnectX-6DX device ID
	- ConnectX-6DX SRIOV device ID

Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
---
 doc/guides/rel_notes/release_19_11.rst | 1 +
 drivers/net/mlx5/mlx5.h                | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index 23182d1..2920fa2 100644
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -169,6 +169,7 @@ New Features
   * Added support for VLAN set VID offload command.
   * Added support for matching on packets withe Geneve tunnel header.
   * Added hairpin support.
+  * Added ConnectX6-DX support.
 
 * **Updated the AF_XDP PMD.**
 
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index f644998..b56dae1 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -55,6 +55,8 @@ enum {
 	PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF = 0xa2d3,
 	PCI_DEVICE_ID_MELLANOX_CONNECTX6 = 0x101b,
 	PCI_DEVICE_ID_MELLANOX_CONNECTX6VF = 0x101c,
+	PCI_DEVICE_ID_MELLANOX_CONNECTX6DX = 0x101d,
+	PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF = 0x101e,
 };
 
 /* Request types for IPC. */
-- 
2.7.4

Re: [dpdk-dev] [PATCH] net/mlx5: add ConnectX6-DX device id

[Wisam Monther]

Hey Raslan,

You are missing PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF in mlx5.c/mlx5_pci_probe()
Otherwise the PCI for CX6DXVF will not be recognized correctly

BRs,
Wisam Jaddo

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Raslan Darawsheh
Sent: Thursday, November 7, 2019 10:40 AM
To: Slava Ovsiienko
Cc: dev@dpdk.org; Asaf Penso
Subject: [dpdk-dev] [PATCH] net/mlx5: add ConnectX6-DX device id

This adds new device id to the list of Mellanox devices that runs mlx5 PMD.
	- ConnectX-6DX device ID
	- ConnectX-6DX SRIOV device ID

Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
---
 doc/guides/rel_notes/release_19_11.rst | 1 +
 drivers/net/mlx5/mlx5.h                | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index 23182d1..2920fa2 100644
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -169,6 +169,7 @@ New Features
   * Added support for VLAN set VID offload command.
   * Added support for matching on packets withe Geneve tunnel header.
   * Added hairpin support.
+  * Added ConnectX6-DX support.
 
 * **Updated the AF_XDP PMD.**
 
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index f644998..b56dae1 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -55,6 +55,8 @@ enum {
 	PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF = 0xa2d3,
 	PCI_DEVICE_ID_MELLANOX_CONNECTX6 = 0x101b,
 	PCI_DEVICE_ID_MELLANOX_CONNECTX6VF = 0x101c,
+	PCI_DEVICE_ID_MELLANOX_CONNECTX6DX = 0x101d,
+	PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF = 0x101e,
 };
 
 /* Request types for IPC. */
--
2.7.4

[dpdk-dev] [PATCH v2] net/mlx5: add ConnectX6-DX device id

[Raslan Darawsheh]

This adds new device id to the list of Mellanox devices
that runs mlx5 PMD.
	- ConnectX-6DX device ID
	- ConnectX-6DX SRIOV device ID

Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
---
	v2: add missing documentation and update pci id map
---
 doc/guides/nics/mlx5.rst               | 36 +++++++++++++++++++++-------------
 doc/guides/rel_notes/release_19_11.rst |  1 +
 drivers/net/mlx5/mlx5.c                | 10 ++++++++++
 drivers/net/mlx5/mlx5.h                |  2 ++
 4 files changed, 35 insertions(+), 14 deletions(-)

diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 4f1093f..0dec788 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -7,9 +7,9 @@ MLX5 poll mode driver
 
 The MLX5 poll mode driver library (**librte_pmd_mlx5**) provides support
 for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** , **Mellanox
-ConnectX-5**, **Mellanox ConnectX-6** and **Mellanox BlueField** families
-of 10/25/40/50/100/200 Gb/s adapters as well as their virtual functions (VF)
-in SR-IOV context.
+ConnectX-5**, **Mellanox ConnectX-6**, **Mellanox ConnectX-6DX** and
+**Mellanox BlueField** families of 10/25/40/50/100/200 Gb/s adapters
+as well as their virtual functions (VF) in SR-IOV context.
 
 Information and documentation about these adapters can be found on the
 `Mellanox website <http://www.mellanox.com>`__. Help is also provided by the
@@ -313,8 +313,10 @@ Run-time configuration
 
   Supported on:
 
-  - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
-  - POWER9 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
+  - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+    and BlueField.
+  - POWER9 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+    and BlueField.
 
 - ``rxq_cqe_pad_en`` parameter [int]
 
@@ -344,8 +346,10 @@ Run-time configuration
 
   Supported on:
 
-  - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
-  - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
+  - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+    and BlueField.
+  - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+    and BlueField.
 
 - ``mprq_en`` parameter [int]
 
@@ -537,11 +541,11 @@ Run-time configuration
 - ``txq_mpw_en`` parameter [int]
 
   A nonzero value enables Enhanced Multi-Packet Write (eMPW) for ConnectX-5,
-  ConnectX-6 and BlueField. eMPW allows the TX burst function to pack up multiple
-  packets in a single descriptor session in order to save PCI bandwidth and improve
-  performance at the cost of a slightly higher CPU usage. When ``txq_inline_mpw``
-  is set along with ``txq_mpw_en``, TX burst function copies entire packet
-  data on to TX descriptor instead of including pointer of packet.
+  ConnectX-6, ConnectX-6 DX and BlueField. eMPW allows the TX burst function to pack
+  up multiple packets in a single descriptor session in order to save PCI bandwidth
+  and improve performance at the cost of a slightly higher CPU usage. When
+  ``txq_inline_mpw`` is set along with ``txq_mpw_en``, TX burst function copies
+  entire packet data on to TX descriptor instead of including pointer of packet.
 
   The Enhanced Multi-Packet Write feature is enabled by default if NIC supports
   it, can be disabled by explicit specifying 0 value for ``txq_mpw_en`` option.
@@ -550,8 +554,8 @@ Run-time configuration
 
 - ``tx_vec_en`` parameter [int]
 
-  A nonzero value enables Tx vector on ConnectX-5, ConnectX-6 and BlueField
-  NICs if the number of global Tx queues on the port is less than
+  A nonzero value enables Tx vector on ConnectX-5, ConnectX-6, ConnectX-6 DX
+  and BlueField NICs if the number of global Tx queues on the port is less than
   ``txqs_max_vec``. The parameter is deprecated and ignored.
 
 - ``rx_vec_en`` parameter [int]
@@ -794,6 +798,7 @@ Mellanox OFED/EN
   - ConnectX-5: **16.21.1000** and above.
   - ConnectX-5 Ex: **16.21.1000** and above.
   - ConnectX-6: **20.99.5374** and above.
+  - ConnectX-6 DX: **22.27.0090** and above.
   - BlueField: **18.25.1010** and above.
 
 While these libraries and kernel modules are available on OpenFabrics
@@ -837,6 +842,9 @@ Supported NICs
 * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
 * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
 * Mellanox(R) ConnectX(R)-5 Ex EN 100G MCX516A-CDAT (2x100G)
+* Mellanox(R) ConnectX(R)-6 200G MCX654106A-HCAT (4x200G)
+* Mellanox(R) ConnectX(R)-6DX EN 100G MCX623106AN-CDAT (2*100g)
+* Mellanox(R) ConnectX(R)-6DX EN 200G MCX623105AN-VDAT (1*200g)
 
 Quick Start Guide on OFED/EN
 ----------------------------
diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index 23182d1..2920fa2 100644
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -169,6 +169,7 @@ New Features
   * Added support for VLAN set VID offload command.
   * Added support for matching on packets withe Geneve tunnel header.
   * Added hairpin support.
+  * Added ConnectX6-DX support.
 
 * **Updated the AF_XDP PMD.**
 
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 72c30bf..594fac1 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -2891,6 +2891,8 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
 	case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
 	case PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF:
 	case PCI_DEVICE_ID_MELLANOX_CONNECTX6VF:
+	case PCI_DEVICE_ID_MELLANOX_CONNECTX6DX:
+	case PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF:
 		dev_config.vf = 1;
 		break;
 	default:
@@ -3061,6 +3063,14 @@ static const struct rte_pci_id mlx5_pci_id_map[] = {
 				PCI_DEVICE_ID_MELLANOX_CONNECTX6VF)
 	},
 	{
+		RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+				PCI_DEVICE_ID_MELLANOX_CONNECTX6DX)
+	},
+	{
+		RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+				PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF)
+	},
+	{
 		.vendor_id = 0
 	}
 };
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index f644998..b56dae1 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -55,6 +55,8 @@ enum {
 	PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF = 0xa2d3,
 	PCI_DEVICE_ID_MELLANOX_CONNECTX6 = 0x101b,
 	PCI_DEVICE_ID_MELLANOX_CONNECTX6VF = 0x101c,
+	PCI_DEVICE_ID_MELLANOX_CONNECTX6DX = 0x101d,
+	PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF = 0x101e,
 };
 
 /* Request types for IPC. */
-- 
2.7.4

Re: [dpdk-dev] [PATCH] net/mlx5: add ConnectX6-DX device id

[Raslan Darawsheh]

Thanks for noticing this, 
I forgot to add these in the commit, just sent a v2 with these included.

Kindest regards,
Raslan Darawsheh

> -----Original Message-----
> From: Wisam Monther <wisamm@mellanox.com>
> Sent: Thursday, November 7, 2019 11:15 AM
> To: Raslan Darawsheh <rasland@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>
> Cc: dev@dpdk.org; Asaf Penso <asafp@mellanox.com>
> Subject: RE: [PATCH] net/mlx5: add ConnectX6-DX device id
> 
> Hey Raslan,
> 
> You are missing PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF in
> mlx5.c/mlx5_pci_probe()
> Otherwise the PCI for CX6DXVF will not be recognized correctly
> 
> BRs,
> Wisam Jaddo
> 
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Raslan Darawsheh
> Sent: Thursday, November 7, 2019 10:40 AM
> To: Slava Ovsiienko
> Cc: dev@dpdk.org; Asaf Penso
> Subject: [dpdk-dev] [PATCH] net/mlx5: add ConnectX6-DX device id
> 
> This adds new device id to the list of Mellanox devices that runs mlx5 PMD.
> 	- ConnectX-6DX device ID
> 	- ConnectX-6DX SRIOV device ID
> 
> Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
> ---
>  doc/guides/rel_notes/release_19_11.rst | 1 +
>  drivers/net/mlx5/mlx5.h                | 2 ++
>  2 files changed, 3 insertions(+)
> 
> diff --git a/doc/guides/rel_notes/release_19_11.rst
> b/doc/guides/rel_notes/release_19_11.rst
> index 23182d1..2920fa2 100644
> --- a/doc/guides/rel_notes/release_19_11.rst
> +++ b/doc/guides/rel_notes/release_19_11.rst
> @@ -169,6 +169,7 @@ New Features
>    * Added support for VLAN set VID offload command.
>    * Added support for matching on packets withe Geneve tunnel header.
>    * Added hairpin support.
> +  * Added ConnectX6-DX support.
> 
>  * **Updated the AF_XDP PMD.**
> 
> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index
> f644998..b56dae1 100644
> --- a/drivers/net/mlx5/mlx5.h
> +++ b/drivers/net/mlx5/mlx5.h
> @@ -55,6 +55,8 @@ enum {
>  	PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF = 0xa2d3,
>  	PCI_DEVICE_ID_MELLANOX_CONNECTX6 = 0x101b,
>  	PCI_DEVICE_ID_MELLANOX_CONNECTX6VF = 0x101c,
> +	PCI_DEVICE_ID_MELLANOX_CONNECTX6DX = 0x101d,
> +	PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF = 0x101e,
>  };
> 
>  /* Request types for IPC. */
> --
> 2.7.4

[dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id

[Raslan Darawsheh]

This adds new device id to the list of Mellanox devices
that runs mlx5 PMD.
	- ConnectX-6DX device ID
	- ConnectX-6DX SRIOV device ID

Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
---
	v3: only set vf bit for CONNECTX6DXVF
	v2: add missing documentation and update pci id map
---

 doc/guides/nics/mlx5.rst               | 36 +++++++++++++++++++++-------------
 doc/guides/rel_notes/release_19_11.rst |  1 +
 drivers/net/mlx5/mlx5.c                |  9 +++++++++
 drivers/net/mlx5/mlx5.h                |  2 ++
 4 files changed, 34 insertions(+), 14 deletions(-)

diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 4f1093f..0dec788 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -7,9 +7,9 @@ MLX5 poll mode driver
 
 The MLX5 poll mode driver library (**librte_pmd_mlx5**) provides support
 for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** , **Mellanox
-ConnectX-5**, **Mellanox ConnectX-6** and **Mellanox BlueField** families
-of 10/25/40/50/100/200 Gb/s adapters as well as their virtual functions (VF)
-in SR-IOV context.
+ConnectX-5**, **Mellanox ConnectX-6**, **Mellanox ConnectX-6DX** and
+**Mellanox BlueField** families of 10/25/40/50/100/200 Gb/s adapters
+as well as their virtual functions (VF) in SR-IOV context.
 
 Information and documentation about these adapters can be found on the
 `Mellanox website <http://www.mellanox.com>`__. Help is also provided by the
@@ -313,8 +313,10 @@ Run-time configuration
 
   Supported on:
 
-  - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
-  - POWER9 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
+  - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+    and BlueField.
+  - POWER9 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+    and BlueField.
 
 - ``rxq_cqe_pad_en`` parameter [int]
 
@@ -344,8 +346,10 @@ Run-time configuration
 
   Supported on:
 
-  - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
-  - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
+  - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+    and BlueField.
+  - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+    and BlueField.
 
 - ``mprq_en`` parameter [int]
 
@@ -537,11 +541,11 @@ Run-time configuration
 - ``txq_mpw_en`` parameter [int]
 
   A nonzero value enables Enhanced Multi-Packet Write (eMPW) for ConnectX-5,
-  ConnectX-6 and BlueField. eMPW allows the TX burst function to pack up multiple
-  packets in a single descriptor session in order to save PCI bandwidth and improve
-  performance at the cost of a slightly higher CPU usage. When ``txq_inline_mpw``
-  is set along with ``txq_mpw_en``, TX burst function copies entire packet
-  data on to TX descriptor instead of including pointer of packet.
+  ConnectX-6, ConnectX-6 DX and BlueField. eMPW allows the TX burst function to pack
+  up multiple packets in a single descriptor session in order to save PCI bandwidth
+  and improve performance at the cost of a slightly higher CPU usage. When
+  ``txq_inline_mpw`` is set along with ``txq_mpw_en``, TX burst function copies
+  entire packet data on to TX descriptor instead of including pointer of packet.
 
   The Enhanced Multi-Packet Write feature is enabled by default if NIC supports
   it, can be disabled by explicit specifying 0 value for ``txq_mpw_en`` option.
@@ -550,8 +554,8 @@ Run-time configuration
 
 - ``tx_vec_en`` parameter [int]
 
-  A nonzero value enables Tx vector on ConnectX-5, ConnectX-6 and BlueField
-  NICs if the number of global Tx queues on the port is less than
+  A nonzero value enables Tx vector on ConnectX-5, ConnectX-6, ConnectX-6 DX
+  and BlueField NICs if the number of global Tx queues on the port is less than
   ``txqs_max_vec``. The parameter is deprecated and ignored.
 
 - ``rx_vec_en`` parameter [int]
@@ -794,6 +798,7 @@ Mellanox OFED/EN
   - ConnectX-5: **16.21.1000** and above.
   - ConnectX-5 Ex: **16.21.1000** and above.
   - ConnectX-6: **20.99.5374** and above.
+  - ConnectX-6 DX: **22.27.0090** and above.
   - BlueField: **18.25.1010** and above.
 
 While these libraries and kernel modules are available on OpenFabrics
@@ -837,6 +842,9 @@ Supported NICs
 * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
 * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
 * Mellanox(R) ConnectX(R)-5 Ex EN 100G MCX516A-CDAT (2x100G)
+* Mellanox(R) ConnectX(R)-6 200G MCX654106A-HCAT (4x200G)
+* Mellanox(R) ConnectX(R)-6DX EN 100G MCX623106AN-CDAT (2*100g)
+* Mellanox(R) ConnectX(R)-6DX EN 200G MCX623105AN-VDAT (1*200g)
 
 Quick Start Guide on OFED/EN
 ----------------------------
diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index 23182d1..2920fa2 100644
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -169,6 +169,7 @@ New Features
   * Added support for VLAN set VID offload command.
   * Added support for matching on packets withe Geneve tunnel header.
   * Added hairpin support.
+  * Added ConnectX6-DX support.
 
 * **Updated the AF_XDP PMD.**
 
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 72c30bf..102c6ab 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -2891,6 +2891,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
 	case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
 	case PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF:
 	case PCI_DEVICE_ID_MELLANOX_CONNECTX6VF:
+	case PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF:
 		dev_config.vf = 1;
 		break;
 	default:
@@ -3061,6 +3062,14 @@ static const struct rte_pci_id mlx5_pci_id_map[] = {
 				PCI_DEVICE_ID_MELLANOX_CONNECTX6VF)
 	},
 	{
+		RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+				PCI_DEVICE_ID_MELLANOX_CONNECTX6DX)
+	},
+	{
+		RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+				PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF)
+	},
+	{
 		.vendor_id = 0
 	}
 };
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index f644998..b56dae1 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -55,6 +55,8 @@ enum {
 	PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF = 0xa2d3,
 	PCI_DEVICE_ID_MELLANOX_CONNECTX6 = 0x101b,
 	PCI_DEVICE_ID_MELLANOX_CONNECTX6VF = 0x101c,
+	PCI_DEVICE_ID_MELLANOX_CONNECTX6DX = 0x101d,
+	PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF = 0x101e,
 };
 
 /* Request types for IPC. */
-- 
2.7.4

Re: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id

[Slava Ovsiienko]

> -----Original Message-----
> From: Raslan Darawsheh <rasland@mellanox.com>
> Sent: Thursday, November 7, 2019 11:36
> To: Slava Ovsiienko <viacheslavo@mellanox.com>
> Cc: dev@dpdk.org; Asaf Penso <asafp@mellanox.com>; Wisam Monther
> <wisamm@mellanox.com>
> Subject: [PATCH v3] net/mlx5: add ConnectX6-DX device id
> 
> This adds new device id to the list of Mellanox devices that runs mlx5 PMD.
> 	- ConnectX-6DX device ID
> 	- ConnectX-6DX SRIOV device ID
> 
> Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
> ---
> 	v3: only set vf bit for CONNECTX6DXVF
> 	v2: add missing documentation and update pci id map
> ---
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>

Re: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id

[Raslan Darawsheh]

Hi,

> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Raslan Darawsheh
> Sent: Thursday, November 7, 2019 11:36 AM
> To: Slava Ovsiienko <viacheslavo@mellanox.com>
> Cc: dev@dpdk.org; Asaf Penso <asafp@mellanox.com>; Wisam Monther
> <wisamm@mellanox.com>
> Subject: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id
> 
> This adds new device id to the list of Mellanox devices
> that runs mlx5 PMD.
> 	- ConnectX-6DX device ID
> 	- ConnectX-6DX SRIOV device ID
> 
> Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
> ---
> 	v3: only set vf bit for CONNECTX6DXVF
> 	v2: add missing documentation and update pci id map
> ---
> 


Patch applied to next-net-mlx,

Kindest regards,
Raslan Darawsheh

Re: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id

[Ferruh Yigit]

On 11/7/2019 12:39 PM, Raslan Darawsheh wrote:
> Hi,
> 
>> -----Original Message-----
>> From: dev <dev-bounces@dpdk.org> On Behalf Of Raslan Darawsheh
>> Sent: Thursday, November 7, 2019 11:36 AM
>> To: Slava Ovsiienko <viacheslavo@mellanox.com>
>> Cc: dev@dpdk.org; Asaf Penso <asafp@mellanox.com>; Wisam Monther
>> <wisamm@mellanox.com>
>> Subject: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id
>>
>> This adds new device id to the list of Mellanox devices
>> that runs mlx5 PMD.
>> 	- ConnectX-6DX device ID
>> 	- ConnectX-6DX SRIOV device ID
>>
>> Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
>> ---
>> 	v3: only set vf bit for CONNECTX6DXVF
>> 	v2: add missing documentation and update pci id map
>> ---
>>
> 
> 
> Patch applied to next-net-mlx,
> 

Is supported web page [1] up to date with this information? If not can you also
send a web patch?

[1]
https://core.dpdk.org/supported/
https://core.dpdk.org/supported/nics/mellanox/

Re: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id

[Raslan Darawsheh]

Hi Ferruh,

Just sent a patch for it.
http://mails.dpdk.org/archives/web/2019-November/001249.html

Kindest regards,
Raslan Darawsheh

> -----Original Message-----
> From: Ferruh Yigit <ferruh.yigit@intel.com>
> Sent: Thursday, November 7, 2019 3:41 PM
> To: Raslan Darawsheh <rasland@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>
> Cc: dev@dpdk.org; Asaf Penso <asafp@mellanox.com>; Wisam Monther
> <wisamm@mellanox.com>
> Subject: Re: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id
> 
> On 11/7/2019 12:39 PM, Raslan Darawsheh wrote:
> > Hi,
> >
> >> -----Original Message-----
> >> From: dev <dev-bounces@dpdk.org> On Behalf Of Raslan Darawsheh
> >> Sent: Thursday, November 7, 2019 11:36 AM
> >> To: Slava Ovsiienko <viacheslavo@mellanox.com>
> >> Cc: dev@dpdk.org; Asaf Penso <asafp@mellanox.com>; Wisam Monther
> >> <wisamm@mellanox.com>
> >> Subject: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id
> >>
> >> This adds new device id to the list of Mellanox devices that runs
> >> mlx5 PMD.
> >> 	- ConnectX-6DX device ID
> >> 	- ConnectX-6DX SRIOV device ID
> >>
> >> Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
> >> ---
> >> 	v3: only set vf bit for CONNECTX6DXVF
> >> 	v2: add missing documentation and update pci id map
> >> ---
> >>
> >
> >
> > Patch applied to next-net-mlx,
> >
> 
> Is supported web page [1] up to date with this information? If not can you
> also send a web patch?
> 
> [1]
> https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fcore.
> dpdk.org%2Fsupported%2F&amp;data=02%7C01%7Crasland%40mellanox.co
> m%7Cf52842fd310346fb709808d763881845%7Ca652971c7d2e4d9ba6a4d1492
> 56f461b%7C0%7C1%7C637087308500799095&amp;sdata=IuJG75oSQMr6zPBc
> thp%2BGH0GTgAwL53g1m57EGSvZgg%3D&amp;reserved=0
> https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fcore.
> dpdk.org%2Fsupported%2Fnics%2Fmellanox%2F&amp;data=02%7C01%7Cra
> sland%40mellanox.com%7Cf52842fd310346fb709808d763881845%7Ca652971
> c7d2e4d9ba6a4d149256f461b%7C0%7C1%7C637087308500809084&amp;sdata
> =M2YLbet%2BFlt7XvO2IxeFtlUm0zxwasJK8NXR%2Fl9oOqk%3D&amp;reserv
> ed=0