DPDK patches and discussions
 help / color / mirror / Atom feed
From: xiangxia.m.yue@gmail.com
To: orika@mellanox.com
Cc: dev@dpdk.org, Tonghao Zhang <xiangxia.m.yue@gmail.com>
Subject: [dpdk-dev] [PATCH dpdk-dev] net/mlx5: support hairpin between different ports
Date: Sun,  1 Dec 2019 17:35:09 +0800	[thread overview]
Message-ID: <1575192909-105146-1-git-send-email-xiangxia.m.yue@gmail.com> (raw)

From: Tonghao Zhang <xiangxia.m.yue@gmail.com>

In the dpdk upstream, each hairpin Rxq can be connected
Txq which can belong to a same port. This patch allows
Rxq connected to different port Txq.

rte_eth_hairpin_conf_check will check the hairpin_conf valid
in high level.

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
---
 drivers/net/mlx5/mlx5_rxq.c     |  5 ++-
 drivers/net/mlx5/mlx5_trigger.c | 41 ++++++++++++++++-------
 drivers/net/mlx5/mlx5_txq.c     |  4 +--
 lib/librte_ethdev/rte_ethdev.c  | 73 ++++++++++++++++++++++++++++-------------
 4 files changed, 83 insertions(+), 40 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index 986ec01..c2daebd 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -547,9 +547,8 @@
 	res = mlx5_rx_queue_pre_setup(dev, idx, desc);
 	if (res)
 		return res;
-	if (hairpin_conf->peer_count != 1 ||
-	    hairpin_conf->peers[0].port != dev->data->port_id ||
-	    hairpin_conf->peers[0].queue >= priv->txqs_n) {
+
+	if (hairpin_conf->peer_count != 1) {
 		DRV_LOG(ERR, "port %u unable to setup hairpin queue index %u "
 			" invalid hairpind configuration", dev->data->port_id,
 			idx);
diff --git a/drivers/net/mlx5/mlx5_trigger.c b/drivers/net/mlx5/mlx5_trigger.c
index ab6937a..3eb2984 100644
--- a/drivers/net/mlx5/mlx5_trigger.c
+++ b/drivers/net/mlx5/mlx5_trigger.c
@@ -185,6 +185,10 @@
 	struct mlx5_rxq_ctrl *rxq_ctrl;
 	struct mlx5_devx_obj *sq;
 	struct mlx5_devx_obj *rq;
+	struct rte_eth_dev *rxq_dev;
+	struct mlx5_priv *rxq_priv;
+	uint16_t peer_queue_id;
+	uint16_t peer_port_id;
 	unsigned int i;
 	int ret = 0;
 
@@ -203,37 +207,50 @@
 			mlx5_txq_release(dev, i);
 			return -rte_errno;
 		}
-		sq = txq_ctrl->obj->sq;
-		rxq_ctrl = mlx5_rxq_get(dev,
-					txq_ctrl->hairpin_conf.peers[0].queue);
+		peer_port_id = txq_ctrl->hairpin_conf.peers[0].port;
+		peer_queue_id = txq_ctrl->hairpin_conf.peers[0].queue;
+		rxq_dev = &rte_eth_devices[peer_port_id];
+		rxq_priv = rxq_dev->data->dev_private;
+
+		rxq_ctrl = mlx5_rxq_get(rxq_dev, peer_queue_id);
 		if (!rxq_ctrl) {
 			mlx5_txq_release(dev, i);
 			rte_errno = EINVAL;
 			DRV_LOG(ERR, "port %u no rxq object found: %d",
-				dev->data->port_id,
-				txq_ctrl->hairpin_conf.peers[0].queue);
+				peer_port_id, peer_queue_id);
 			return -rte_errno;
 		}
 		if (rxq_ctrl->type != MLX5_RXQ_TYPE_HAIRPIN ||
 		    rxq_ctrl->hairpin_conf.peers[0].queue != i) {
 			rte_errno = ENOMEM;
 			DRV_LOG(ERR, "port %u Tx queue %d can't be binded to "
-				"Rx queue %d", dev->data->port_id,
-				i, txq_ctrl->hairpin_conf.peers[0].queue);
+				"port %u Rx queue %d",
+				dev->data->port_id, i,
+				peer_port_id, peer_queue_id);
 			goto error;
 		}
+		if (!rxq_ctrl->obj) {
+			DRV_LOG(ERR, "port %u rxq obj not created, "
+				"you may start it firstly.",
+				peer_port_id);
+			goto error;
+		}
+
+		sq = txq_ctrl->obj->sq;
 		rq = rxq_ctrl->obj->rq;
 		if (!rq) {
 			rte_errno = ENOMEM;
-			DRV_LOG(ERR, "port %u hairpin no matching rxq: %d",
+			DRV_LOG(ERR, "port %u hairpin no matching port"
+				" %u rxq %d",
 				dev->data->port_id,
-				txq_ctrl->hairpin_conf.peers[0].queue);
+				peer_port_id,
+				peer_queue_id);
 			goto error;
 		}
 		sq_attr.state = MLX5_SQC_STATE_RDY;
 		sq_attr.sq_state = MLX5_SQC_STATE_RST;
 		sq_attr.hairpin_peer_rq = rq->id;
-		sq_attr.hairpin_peer_vhca = priv->config.hca_attr.vhca_id;
+		sq_attr.hairpin_peer_vhca = rxq_priv->config.hca_attr.vhca_id;
 		ret = mlx5_devx_cmd_modify_sq(sq, &sq_attr);
 		if (ret)
 			goto error;
@@ -245,12 +262,12 @@
 		if (ret)
 			goto error;
 		mlx5_txq_release(dev, i);
-		mlx5_rxq_release(dev, txq_ctrl->hairpin_conf.peers[0].queue);
+		mlx5_rxq_release(rxq_dev, peer_queue_id);
 	}
 	return 0;
 error:
 	mlx5_txq_release(dev, i);
-	mlx5_rxq_release(dev, txq_ctrl->hairpin_conf.peers[0].queue);
+	mlx5_rxq_release(dev, peer_queue_id);
 	return -rte_errno;
 }
 
diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c
index bac4f71..98ee35e 100644
--- a/drivers/net/mlx5/mlx5_txq.c
+++ b/drivers/net/mlx5/mlx5_txq.c
@@ -254,9 +254,7 @@
 	res = mlx5_tx_queue_pre_setup(dev, idx, desc);
 	if (res)
 		return res;
-	if (hairpin_conf->peer_count != 1 ||
-	    hairpin_conf->peers[0].port != dev->data->port_id ||
-	    hairpin_conf->peers[0].queue >= priv->rxqs_n) {
+	if (hairpin_conf->peer_count != 1) {
 		DRV_LOG(ERR, "port %u unable to setup hairpin queue index %u "
 			" invalid hairpind configuration", dev->data->port_id,
 			idx);
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 8d2ce31..0bd6d87 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -1923,6 +1923,53 @@ struct rte_eth_dev *
 	return eth_err(port_id, ret);
 }
 
+static int
+rte_eth_hairpin_conf_check(const struct rte_eth_hairpin_conf *conf,
+			      const struct rte_eth_hairpin_cap *cap,
+			      bool is_rx_hairpin)
+{
+	uint16_t max_queues_mapping = is_rx_hairpin ?
+				      cap->max_rx_2_tx : cap->max_tx_2_rx;
+	struct rte_eth_dev *dev;
+	uint16_t nb_queues;
+	uint16_t port_id;
+	int i;
+
+	if (conf->peer_count == 0) {
+		RTE_ETHDEV_LOG(ERR, "Invalid value for number of peers(=%hu),"
+				" should be: > 0",
+			       conf->peer_count);
+		return -EINVAL;
+	}
+	if (conf->peer_count > max_queues_mapping) {
+		RTE_ETHDEV_LOG(ERR, "Invalid value for number of peers(=%hu),"
+			       " should be: <= %hu",
+			       conf->peer_count, max_queues_mapping);
+		return -EINVAL;
+	}
+	for (i = 0; i < conf->peer_count; i++) {
+		port_id = conf->peers[i].port;
+
+		if (!rte_eth_dev_is_valid_port(port_id)) {
+			RTE_ETHDEV_LOG(ERR, "Invalid port_id(=%hu) for"
+				       " hairpin peers", conf->peer_count);
+			return -EINVAL;
+		}
+
+		dev = &rte_eth_devices[port_id];
+		nb_queues = is_rx_hairpin ?
+			    dev->data->nb_tx_queues : dev->data->nb_rx_queues;
+		if (conf->peers[i].queue >= nb_queues) {
+			RTE_ETHDEV_LOG(ERR, "Invalid queue_id(=%hu) for"
+				       " hairpin peers, shoud be < %hu",
+				       conf->peer_count, nb_queues);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
 int
 rte_eth_rx_hairpin_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
 			       uint16_t nb_rx_desc,
@@ -1956,18 +2003,9 @@ struct rte_eth_dev *
 			nb_rx_desc, cap.max_nb_desc);
 		return -EINVAL;
 	}
-	if (conf->peer_count > cap.max_rx_2_tx) {
-		RTE_ETHDEV_LOG(ERR,
-			"Invalid value for number of peers for Rx queue(=%hu), should be: <= %hu",
-			conf->peer_count, cap.max_rx_2_tx);
-		return -EINVAL;
-	}
-	if (conf->peer_count == 0) {
-		RTE_ETHDEV_LOG(ERR,
-			"Invalid value for number of peers for Rx queue(=%hu), should be: > 0",
-			conf->peer_count);
+	if (rte_eth_hairpin_conf_check(conf, &cap, true))
 		return -EINVAL;
-	}
+
 	for (i = 0, count = 0; i < dev->data->nb_rx_queues &&
 	     cap.max_nb_queues != UINT16_MAX; i++) {
 		if (i == rx_queue_id || rte_eth_dev_is_rx_hairpin_queue(dev, i))
@@ -2126,18 +2164,9 @@ struct rte_eth_dev *
 			nb_tx_desc, cap.max_nb_desc);
 		return -EINVAL;
 	}
-	if (conf->peer_count > cap.max_tx_2_rx) {
-		RTE_ETHDEV_LOG(ERR,
-			"Invalid value for number of peers for Tx queue(=%hu), should be: <= %hu",
-			conf->peer_count, cap.max_tx_2_rx);
+	if (rte_eth_hairpin_conf_check(conf, &cap, false))
 		return -EINVAL;
-	}
-	if (conf->peer_count == 0) {
-		RTE_ETHDEV_LOG(ERR,
-			"Invalid value for number of peers for Tx queue(=%hu), should be: > 0",
-			conf->peer_count);
-		return -EINVAL;
-	}
+
 	for (i = 0, count = 0; i < dev->data->nb_tx_queues &&
 	     cap.max_nb_queues != UINT16_MAX; i++) {
 		if (i == tx_queue_id || rte_eth_dev_is_tx_hairpin_queue(dev, i))
-- 
1.8.3.1


             reply	other threads:[~2019-12-01  9:35 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-01  9:35 xiangxia.m.yue [this message]
2020-01-16 11:40 ` Ori Kam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1575192909-105146-1-git-send-email-xiangxia.m.yue@gmail.com \
    --to=xiangxia.m.yue@gmail.com \
    --cc=dev@dpdk.org \
    --cc=orika@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).