DPDK patches and discussions
 help / color / mirror / Atom feed
From: Mahipal Challa <mchalla@marvell.com>
To: <dev@dpdk.org>
Cc: <jerinj@marvell.com>, <pathreya@marvell.com>,
	<snilla@marvell.com>, <venkatn@marvell.com>
Subject: [dpdk-dev] [PATCH v1 4/6] raw/octeontx2_ep: add enqueue operation
Date: Fri, 6 Dec 2019 12:09:23 +0530	[thread overview]
Message-ID: <1575614365-8907-5-git-send-email-mchalla@marvell.com> (raw)
In-Reply-To: <1575614365-8907-1-git-send-email-mchalla@marvell.com>

Add rawdev enqueue operation for SDP VF devices.

Signed-off-by: Mahipal Challa <mchalla@marvell.com>
---
 doc/guides/rawdevs/octeontx2_ep.rst       |   6 +
 drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c | 242 ++++++++++++++++++++++++++++++
 drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h |  39 +++++
 drivers/raw/octeontx2_ep/otx2_ep_rawdev.c |   1 +
 drivers/raw/octeontx2_ep/otx2_ep_rawdev.h |  20 +++
 drivers/raw/octeontx2_ep/otx2_ep_vf.c     |  24 +++
 6 files changed, 332 insertions(+)

diff --git a/doc/guides/rawdevs/octeontx2_ep.rst b/doc/guides/rawdevs/octeontx2_ep.rst
index 2507fcf..39a7c29 100644
--- a/doc/guides/rawdevs/octeontx2_ep.rst
+++ b/doc/guides/rawdevs/octeontx2_ep.rst
@@ -68,3 +68,9 @@ The following code shows how the device is configured
 
    rte_rawdev_configure(dev_id, (rte_rawdev_obj_t)&rdev_info);
 
+Performing Data Transfer
+------------------------
+
+To perform data transfer using SDP VF EP rawdev devices use standard
+``rte_rawdev_enqueue_buffers()`` and ``rte_rawdev_dequeue_buffers()`` APIs.
+
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
index 584b818..ebbacfb 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
@@ -403,3 +403,245 @@
 	return -ENOMEM;
 }
 
+static inline void
+sdp_iqreq_delete(struct sdp_device *sdpvf,
+		struct sdp_instr_queue *iq, uint32_t idx)
+{
+	uint32_t reqtype;
+	void *buf;
+
+	buf     = iq->req_list[idx].buf;
+	reqtype = iq->req_list[idx].reqtype;
+
+	switch (reqtype) {
+	case SDP_REQTYPE_NORESP:
+		rte_mempool_put(sdpvf->enqdeq_mpool, buf);
+		otx2_sdp_dbg("IQ buffer freed at idx[%d]", idx);
+		break;
+
+	case SDP_REQTYPE_NORESP_GATHER:
+	case SDP_REQTYPE_NONE:
+	default:
+		otx2_info("This iqreq mode is not supported:%d", reqtype);
+
+	}
+
+	/* Reset the request list at this index */
+	iq->req_list[idx].buf = NULL;
+	iq->req_list[idx].reqtype = 0;
+}
+
+static inline void
+sdp_iqreq_add(struct sdp_instr_queue *iq, void *buf,
+		uint32_t reqtype)
+{
+	iq->req_list[iq->host_write_index].buf = buf;
+	iq->req_list[iq->host_write_index].reqtype = reqtype;
+
+	otx2_sdp_dbg("IQ buffer added at idx[%d]", iq->host_write_index);
+
+}
+
+static void
+sdp_flush_iq(struct sdp_device *sdpvf,
+		struct sdp_instr_queue *iq,
+		uint32_t pending_thresh __rte_unused)
+{
+	uint32_t instr_processed = 0;
+
+	rte_spinlock_lock(&iq->lock);
+
+	iq->otx_read_index = sdpvf->fn_list.update_iq_read_idx(iq);
+	while (iq->flush_index != iq->otx_read_index) {
+		/* Free the IQ data buffer to the pool */
+		sdp_iqreq_delete(sdpvf, iq, iq->flush_index);
+		iq->flush_index =
+			sdp_incr_index(iq->flush_index, 1, iq->nb_desc);
+
+		instr_processed++;
+	}
+
+	iq->stats.instr_processed = instr_processed;
+	rte_atomic64_sub(&iq->instr_pending, instr_processed);
+
+	rte_spinlock_unlock(&iq->lock);
+}
+
+static inline void
+sdp_ring_doorbell(struct sdp_device *sdpvf __rte_unused,
+		struct sdp_instr_queue *iq)
+{
+	otx2_write64(iq->fill_cnt, iq->doorbell_reg);
+
+	/* Make sure doorbell write goes through */
+	rte_wmb();
+	iq->fill_cnt = 0;
+
+}
+
+static inline int
+post_iqcmd(struct sdp_instr_queue *iq, uint8_t *iqcmd)
+{
+	uint8_t *iqptr, cmdsize;
+
+	/* This ensures that the read index does not wrap around to
+	 * the same position if queue gets full before OCTEON TX2 could
+	 * fetch any instr.
+	 */
+	if (rte_atomic64_read(&iq->instr_pending) >=
+			      (int32_t)(iq->nb_desc - 1)) {
+		otx2_err("IQ is full, pending:%ld",
+			 (long)rte_atomic64_read(&iq->instr_pending));
+
+		return SDP_IQ_SEND_FAILED;
+	}
+
+	/* Copy cmd into iq */
+	cmdsize = ((iq->iqcmd_64B) ? 64 : 32);
+	iqptr   = iq->base_addr + (cmdsize * iq->host_write_index);
+
+	rte_memcpy(iqptr, iqcmd, cmdsize);
+
+	otx2_sdp_dbg("IQ cmd posted @ index:%d", iq->host_write_index);
+
+	/* Increment the host write index */
+	iq->host_write_index =
+		sdp_incr_index(iq->host_write_index, 1, iq->nb_desc);
+
+	iq->fill_cnt++;
+
+	/* Flush the command into memory. We need to be sure the data
+	 * is in memory before indicating that the instruction is
+	 * pending.
+	 */
+	rte_wmb();
+	rte_atomic64_inc(&iq->instr_pending);
+
+	/* SDP_IQ_SEND_SUCCESS */
+	return 0;
+}
+
+
+static int
+sdp_send_data(struct sdp_device *sdpvf,
+	      struct sdp_instr_queue *iq, void *cmd)
+{
+	uint32_t ret;
+
+	/* Lock this IQ command queue before posting instruction */
+	rte_spinlock_lock(&iq->post_lock);
+
+	/* Submit IQ command */
+	ret = post_iqcmd(iq, cmd);
+
+	if (ret == SDP_IQ_SEND_SUCCESS) {
+		sdp_ring_doorbell(sdpvf, iq);
+
+		iq->stats.instr_posted++;
+		otx2_sdp_dbg("Instr submit success posted: %ld\n",
+			     (long)iq->stats.instr_posted);
+
+	} else {
+		iq->stats.instr_dropped++;
+		otx2_err("Instr submit failled, dropped: %ld\n",
+			 (long)iq->stats.instr_dropped);
+
+	}
+
+	rte_spinlock_unlock(&iq->post_lock);
+
+	return ret;
+}
+
+
+/* Enqueue requests/packets to SDP IQ queue.
+ * returns number of requests enqueued successfully
+ */
+int
+sdp_rawdev_enqueue(struct rte_rawdev *rawdev,
+		   struct rte_rawdev_buf **buffers __rte_unused,
+		   unsigned int count, rte_rawdev_obj_t context)
+{
+	struct sdp_instr_64B *iqcmd;
+	struct sdp_instr_queue *iq;
+	struct sdp_soft_instr *si;
+	struct sdp_device *sdpvf;
+
+	struct sdp_instr_ih ihx;
+
+	sdpvf = (struct sdp_device *)rawdev->dev_private;
+	si = (struct sdp_soft_instr *)context;
+
+	iq = sdpvf->instr_queue[si->q_no];
+
+	if ((count > 1) || (count < 1)) {
+		otx2_err("This mode not supported: req[%d]", count);
+		goto enq_fail;
+	}
+
+	memset(&ihx, 0, sizeof(struct sdp_instr_ih));
+
+	iqcmd = &si->command;
+	memset(iqcmd, 0, sizeof(struct sdp_instr_64B));
+
+	iqcmd->dptr = (uint64_t)si->dptr;
+
+	/* Populate SDP IH */
+	ihx.pkind  = sdpvf->pkind;
+	ihx.fsz    = si->ih.fsz + 8; /* 8B for NIX IH */
+	ihx.gather = si->ih.gather;
+
+	/* Direct data instruction */
+	ihx.tlen   = si->ih.tlen + ihx.fsz;
+
+	switch (ihx.gather) {
+	case 0: /* Direct data instr */
+		ihx.tlen = si->ih.tlen + ihx.fsz;
+		break;
+
+	default: /* Gather */
+		switch (si->ih.gsz) {
+		case 0: /* Direct gather instr */
+			otx2_err("Direct Gather instr : not supported");
+			goto enq_fail;
+
+		default: /* Indirect gather instr */
+			otx2_err("Indirect Gather instr : not supported");
+			goto enq_fail;
+		}
+	}
+
+	rte_memcpy(&iqcmd->ih, &ihx, sizeof(uint64_t));
+	iqcmd->rptr = (uint64_t)si->rptr;
+	rte_memcpy(&iqcmd->irh, &si->irh, sizeof(uint64_t));
+
+	/* Swap FSZ(front data) here, to avoid swapping on OCTEON TX2 side */
+	sdp_swap_8B_data(&iqcmd->rptr, 1);
+	sdp_swap_8B_data(&iqcmd->irh, 1);
+
+	otx2_sdp_dbg("After swapping");
+	otx2_sdp_dbg("Word0 [dptr]: 0x%016lx", (unsigned long)iqcmd->dptr);
+	otx2_sdp_dbg("Word1 [ihtx]: 0x%016lx", (unsigned long)iqcmd->ih);
+	otx2_sdp_dbg("Word2 [rptr]: 0x%016lx", (unsigned long)iqcmd->rptr);
+	otx2_sdp_dbg("Word3 [irh]: 0x%016lx", (unsigned long)iqcmd->irh);
+	otx2_sdp_dbg("Word4 [exhdr[0]]: 0x%016lx",
+			(unsigned long)iqcmd->exhdr[0]);
+
+	sdp_iqreq_add(iq, si->dptr, si->reqtype);
+
+	if (sdp_send_data(sdpvf, iq, iqcmd)) {
+		otx2_err("Data send failled :");
+		sdp_iqreq_delete(sdpvf, iq, iq->host_write_index);
+		goto enq_fail;
+	}
+
+	if (rte_atomic64_read(&iq->instr_pending) >= 1)
+		sdp_flush_iq(sdpvf, iq, 1 /*(iq->nb_desc / 2)*/);
+
+	/* Return no# of instructions posted successfully. */
+	return count;
+
+enq_fail:
+	return SDP_IQ_SEND_FAILED;
+}
+
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
index 4c28283..b9b7c0b 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
+++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
@@ -8,4 +8,43 @@
 #include <rte_byteorder.h>
 #include "otx2_ep_rawdev.h"
 
+#define SDP_IQ_SEND_FAILED      (-1)
+#define SDP_IQ_SEND_SUCCESS     (0)
+
+
+static inline uint64_t
+sdp_endian_swap_8B(uint64_t _d)
+{
+	return ((((((uint64_t)(_d)) >>  0) & (uint64_t)0xff) << 56) |
+		(((((uint64_t)(_d)) >>  8) & (uint64_t)0xff) << 48) |
+		(((((uint64_t)(_d)) >> 16) & (uint64_t)0xff) << 40) |
+		(((((uint64_t)(_d)) >> 24) & (uint64_t)0xff) << 32) |
+		(((((uint64_t)(_d)) >> 32) & (uint64_t)0xff) << 24) |
+		(((((uint64_t)(_d)) >> 40) & (uint64_t)0xff) << 16) |
+		(((((uint64_t)(_d)) >> 48) & (uint64_t)0xff) <<  8) |
+		(((((uint64_t)(_d)) >> 56) & (uint64_t)0xff) <<  0));
+}
+
+static inline void
+sdp_swap_8B_data(uint64_t *data, uint32_t blocks)
+{
+	/* Swap 8B blocks */
+	while (blocks) {
+		*data = sdp_endian_swap_8B(*data);
+		blocks--;
+		data++;
+	}
+}
+
+static inline uint32_t
+sdp_incr_index(uint32_t index, uint32_t count, uint32_t max)
+{
+	if ((index + count) >= max)
+		index = index + count - max;
+	else
+		index += count;
+
+	return index;
+}
+
 #endif /* _OTX2_EP_ENQDEQ_H_ */
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
index 2c43d3f..4ba8473 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
@@ -251,6 +251,7 @@
 	.dev_start      = sdp_rawdev_start,
 	.dev_stop       = sdp_rawdev_stop,
 	.dev_close      = sdp_rawdev_close,
+	.enqueue_bufs   = sdp_rawdev_enqueue,
 };
 
 static int
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
index a01f48d..8fd06fb 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
@@ -8,6 +8,10 @@
 #include <rte_byteorder.h>
 #include <rte_spinlock.h>
 
+/* IQ instruction req types */
+#define SDP_REQTYPE_NONE             (0)
+#define SDP_REQTYPE_NORESP           (1)
+#define SDP_REQTYPE_NORESP_GATHER    (2)
 
 /* Input Request Header format */
 struct sdp_instr_irh {
@@ -128,6 +132,13 @@ struct sdp_instr_list {
 };
 #define SDP_IQREQ_LIST_SIZE	(sizeof(struct sdp_instr_list))
 
+/* Input Queue statistics. Each input queue has four stats fields. */
+struct sdp_iq_stats {
+	uint64_t instr_posted; /* Instructions posted to this queue. */
+	uint64_t instr_processed; /* Instructions processed in this queue. */
+	uint64_t instr_dropped; /* Instructions that could not be processed */
+};
+
 /* Structure to define the configuration attributes for each Input queue. */
 struct sdp_iq_config {
 	/* Max number of IQs available */
@@ -195,6 +206,9 @@ struct sdp_instr_queue {
 	/* Number of instructions pending to be posted to OCTEON TX2. */
 	uint32_t fill_cnt;
 
+	/* Statistics for this input queue. */
+	struct sdp_iq_stats stats;
+
 	/* DMA mapped base address of the input descriptor ring. */
 	uint64_t base_addr_dma;
 
@@ -380,6 +394,8 @@ struct sdp_fn_list {
 	void (*setup_oq_regs)(struct sdp_device *sdpvf, uint32_t q_no);
 
 	int (*setup_device_regs)(struct sdp_device *sdpvf);
+	uint32_t (*update_iq_read_idx)(struct sdp_instr_queue *iq);
+
 	void (*enable_io_queues)(struct sdp_device *sdpvf);
 	void (*disable_io_queues)(struct sdp_device *sdpvf);
 
@@ -458,4 +474,8 @@ struct sdp_device {
 int sdp_setup_oqs(struct sdp_device *sdpvf, uint32_t oq_no);
 int sdp_delete_oqs(struct sdp_device *sdpvf, uint32_t oq_no);
 
+int sdp_rawdev_enqueue(struct rte_rawdev *dev, struct rte_rawdev_buf **buffers,
+		       unsigned int count, rte_rawdev_obj_t context);
+
+
 #endif /* _OTX2_EP_RAWDEV_H_ */
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_vf.c b/drivers/raw/octeontx2_ep/otx2_ep_vf.c
index 8e79fe8..c5c0bc3 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_vf.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_vf.c
@@ -409,6 +409,28 @@
 		sdp_vf_disable_oq(sdpvf, q_no);
 }
 
+static uint32_t
+sdp_vf_update_read_index(struct sdp_instr_queue *iq)
+{
+	uint32_t new_idx = rte_read32(iq->inst_cnt_reg);
+
+	/* The new instr cnt reg is a 32-bit counter that can roll over.
+	 * We have noted the counter's initial value at init time into
+	 * reset_instr_cnt
+	 */
+	if (iq->reset_instr_cnt < new_idx)
+		new_idx -= iq->reset_instr_cnt;
+	else
+		new_idx += (0xffffffff - iq->reset_instr_cnt) + 1;
+
+	/* Modulo of the new index with the IQ size will give us
+	 * the new index.
+	 */
+	new_idx %= iq->nb_desc;
+
+	return new_idx;
+}
+
 int
 sdp_vf_setup_device(struct sdp_device *sdpvf)
 {
@@ -436,6 +458,8 @@
 	sdpvf->fn_list.setup_oq_regs       = sdp_vf_setup_oq_regs;
 
 	sdpvf->fn_list.setup_device_regs   = sdp_vf_setup_device_regs;
+	sdpvf->fn_list.update_iq_read_idx  = sdp_vf_update_read_index;
+
 	sdpvf->fn_list.enable_io_queues    = sdp_vf_enable_io_queues;
 	sdpvf->fn_list.disable_io_queues   = sdp_vf_disable_io_queues;
 
-- 
1.8.3.1


  parent reply	other threads:[~2019-12-09  9:26 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-06  6:39 [dpdk-dev] [PATCH v1 0/6] OCTEON TX2 End Point Driver Mahipal Challa
2019-12-06  6:39 ` [dpdk-dev] [PATCH v1 1/6] raw/octeontx2_ep: add build infra and device probe Mahipal Challa
2019-12-06  6:39 ` [dpdk-dev] [PATCH v1 2/6] raw/octeontx2_ep: add device configuration Mahipal Challa
2019-12-14 16:04   ` Gavin Hu (Arm Technology China)
2019-12-19  6:41     ` Mahipal Challa
2019-12-06  6:39 ` [dpdk-dev] [PATCH v1 3/6] raw/octeontx2_ep: add device uninitialization Mahipal Challa
2019-12-06  6:39 ` Mahipal Challa [this message]
2019-12-14 16:24   ` [dpdk-dev] [PATCH v1 4/6] raw/octeontx2_ep: add enqueue operation Gavin Hu (Arm Technology China)
2019-12-19  6:48     ` Mahipal Challa
2019-12-06  6:39 ` [dpdk-dev] [PATCH v1 5/6] raw/octeontx2_ep: add dequeue operation Mahipal Challa
2019-12-14 16:18   ` Gavin Hu (Arm Technology China)
2019-12-19  6:45     ` Mahipal Challa
2019-12-06  6:39 ` [dpdk-dev] [PATCH v1 6/6] raw/octeontx2_ep: add driver self test Mahipal Challa
2019-12-08 15:35 [dpdk-dev] [PATCH v1 0/6] OCTEON TX2 End Point Driver Mahipal Challa
2019-12-08 15:35 ` [dpdk-dev] [PATCH v1 4/6] raw/octeontx2_ep: add enqueue operation Mahipal Challa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1575614365-8907-5-git-send-email-mchalla@marvell.com \
    --to=mchalla@marvell.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=pathreya@marvell.com \
    --cc=snilla@marvell.com \
    --cc=venkatn@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).