From: Anoob Joseph <anoobj@marvell.com>
To: Akhil Goyal <akhil.goyal@nxp.com>,
Declan Doherty <declan.doherty@intel.com>,
Thomas Monjalon <thomas@monjalon.net>
Cc: Anoob Joseph <anoobj@marvell.com>,
Jerin Jacob <jerinj@marvell.com>,
Narayana Prasad <pathreya@marvell.com>,
Kiran Kumar K <kirankumark@marvell.com>,
Nithin Dabilpuram <ndabilpuram@marvell.com>,
"Pavan Nikhilesh" <pbhagavatula@marvell.com>,
Ankur Dwivedi <adwivedi@marvell.com>,
Archana Muniganti <marchana@marvell.com>,
Tejasree Kondoj <ktejasree@marvell.com>,
Vamsi Attunuru <vattunuru@marvell.com>,
"Lukasz Bartosik" <lbartosik@marvell.com>, <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH 00/15] add OCTEONTX2 inline IPsec support
Date: Sun, 8 Dec 2019 17:24:39 +0530 [thread overview]
Message-ID: <1575806094-28391-1-git-send-email-anoobj@marvell.com> (raw)
This series adds inline IPsec support in OCTEONTX2 PMD.
In the inbound path, rte_flow framework need to be used to configure
the NPC block, which does the h/w lookup. The packets would get
processed by the crypto block and would submit to the scheduling block,
SSO. So inline IPsec mode can be enabled only when traffic is received
via event device using Rx adapter.
In the outbound path, the core would submit to the crypto block and the
crypto block would submit the packet for Tx internally.
Ankur Dwivedi (3):
crypto/octeontx2: add eth security capabilities
crypto/octeontx2: add datapath ops in eth security ctx
crypto/octeontx2: add inline tx path changes
Anoob Joseph (4):
common/octeontx2: add CPT LF mbox for inline inbound
crypto/octeontx2: create eth security ctx
crypto/octeontx2: enable CPT to share QP with ethdev
crypto/octeontx2: add eth security session operations
Archana Muniganti (3):
crypto/octeontx2: add lookup mem changes to hold sa indices
drivers/octeontx2: add sec in compiler optimized RX fastpath framework
drivers/octeontx2: add sec in compiler optimized TX fastpath framework
Tejasree Kondoj (3):
crypto/octeontx2: configure for inline IPsec
crypto/octeontx2: add security in eth dev configure
net/octeontx2: add inline ipsec rx path changes
Vamsi Attunuru (2):
common/octeontx2: add routine to check if rte_eth_dev belongs to otx2
crypto/octeontx2: sync inline tag type cfg with Rx adapter
configuration
doc/guides/nics/octeontx2.rst | 20 +
drivers/common/octeontx2/otx2_common.c | 22 +
drivers/common/octeontx2/otx2_common.h | 38 +
drivers/common/octeontx2/otx2_mbox.h | 7 +
.../octeontx2/rte_common_octeontx2_version.map | 3 +
drivers/crypto/octeontx2/Makefile | 7 +-
drivers/crypto/octeontx2/meson.build | 7 +-
drivers/crypto/octeontx2/otx2_cryptodev.c | 8 +
.../crypto/octeontx2/otx2_cryptodev_hw_access.h | 22 +-
drivers/crypto/octeontx2/otx2_cryptodev_mbox.c | 53 ++
drivers/crypto/octeontx2/otx2_cryptodev_mbox.h | 7 +
drivers/crypto/octeontx2/otx2_cryptodev_ops.c | 56 ++
drivers/crypto/octeontx2/otx2_cryptodev_qp.h | 35 +
drivers/crypto/octeontx2/otx2_ipsec_fp.h | 348 ++++++++
drivers/crypto/octeontx2/otx2_security.c | 909 +++++++++++++++++++++
drivers/crypto/octeontx2/otx2_security.h | 158 ++++
drivers/crypto/octeontx2/otx2_security_tx.h | 176 ++++
drivers/event/octeontx2/Makefile | 1 +
drivers/event/octeontx2/meson.build | 5 +-
drivers/event/octeontx2/otx2_evdev.c | 170 ++--
drivers/event/octeontx2/otx2_evdev.h | 4 +-
drivers/event/octeontx2/otx2_worker.c | 6 +-
drivers/event/octeontx2/otx2_worker.h | 6 +
drivers/event/octeontx2/otx2_worker_dual.c | 6 +-
drivers/net/octeontx2/Makefile | 1 +
drivers/net/octeontx2/meson.build | 3 +
drivers/net/octeontx2/otx2_ethdev.c | 46 +-
drivers/net/octeontx2/otx2_ethdev.h | 2 +
drivers/net/octeontx2/otx2_ethdev_devargs.c | 19 +
drivers/net/octeontx2/otx2_flow.c | 26 +
drivers/net/octeontx2/otx2_lookup.c | 9 +-
drivers/net/octeontx2/otx2_rx.c | 27 +-
drivers/net/octeontx2/otx2_rx.h | 386 ++++++---
drivers/net/octeontx2/otx2_tx.c | 29 +-
drivers/net/octeontx2/otx2_tx.h | 271 ++++--
35 files changed, 2596 insertions(+), 297 deletions(-)
create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev_qp.h
create mode 100644 drivers/crypto/octeontx2/otx2_ipsec_fp.h
create mode 100644 drivers/crypto/octeontx2/otx2_security.c
create mode 100644 drivers/crypto/octeontx2/otx2_security.h
create mode 100644 drivers/crypto/octeontx2/otx2_security_tx.h
--
2.7.4
next reply other threads:[~2019-12-08 11:55 UTC|newest]
Thread overview: 111+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-08 11:54 Anoob Joseph [this message]
2019-12-08 11:54 ` [dpdk-dev] [PATCH 01/15] common/octeontx2: add CPT LF mbox for inline inbound Anoob Joseph
2019-12-09 7:38 ` Jerin Jacob
2019-12-08 11:54 ` [dpdk-dev] [PATCH 02/15] common/octeontx2: add routine to check if rte_eth_dev belongs to otx2 Anoob Joseph
2019-12-09 7:42 ` Jerin Jacob
2019-12-08 11:54 ` [dpdk-dev] [PATCH 03/15] crypto/octeontx2: configure for inline IPsec Anoob Joseph
2019-12-09 7:46 ` Jerin Jacob
2019-12-09 7:52 ` [dpdk-dev] [EXT] " Anoob Joseph
2019-12-09 7:53 ` Jerin Jacob
2019-12-08 11:54 ` [dpdk-dev] [PATCH 04/15] crypto/octeontx2: create eth security ctx Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 05/15] crypto/octeontx2: add security in eth dev configure Anoob Joseph
2019-12-09 7:51 ` Jerin Jacob
2019-12-09 8:03 ` Anoob Joseph
2019-12-09 8:04 ` Jerin Jacob
2019-12-08 11:54 ` [dpdk-dev] [PATCH 06/15] crypto/octeontx2: add eth security capabilities Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 07/15] crypto/octeontx2: enable CPT to share QP with ethdev Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 08/15] crypto/octeontx2: add eth security session operations Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 09/15] crypto/octeontx2: add datapath ops in eth security ctx Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 10/15] crypto/octeontx2: add lookup mem changes to hold sa indices Anoob Joseph
2019-12-09 8:02 ` Jerin Jacob
2019-12-13 7:12 ` [dpdk-dev] [EXT] " Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 11/15] net/octeontx2: add inline ipsec rx path changes Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 12/15] drivers/octeontx2: add sec in compiler optimized RX fastpath framework Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 13/15] drivers/octeontx2: add sec in compiler optimized TX " Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 14/15] crypto/octeontx2: add inline tx path changes Anoob Joseph
2019-12-14 15:42 ` Gavin Hu (Arm Technology China)
2019-12-08 11:54 ` [dpdk-dev] [PATCH 15/15] crypto/octeontx2: sync inline tag type cfg with Rx adapter configuration Anoob Joseph
2019-12-09 8:06 ` [dpdk-dev] [PATCH 00/15] add OCTEONTX2 inline IPsec support Jerin Jacob
2019-12-10 22:54 ` Thomas Monjalon
2019-12-13 7:41 ` [dpdk-dev] [EXT] " Anoob Joseph
2019-12-13 10:18 ` Thomas Monjalon
2020-01-18 10:48 ` [dpdk-dev] [PATCH v2 " Anoob Joseph
2020-01-18 10:48 ` [dpdk-dev] [PATCH v2 01/15] common/octeontx2: add CPT LF mbox for inline inbound Anoob Joseph
2020-01-18 14:34 ` Jerin Jacob
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 02/15] common/octeontx2: add routine to check if sec capable otx2 Anoob Joseph
2020-01-18 14:35 ` Jerin Jacob
2020-01-27 7:01 ` Akhil Goyal
2020-01-27 8:02 ` Anoob Joseph
2020-01-27 8:12 ` Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 03/15] crypto/octeontx2: configure for inline IPsec Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 04/15] crypto/octeontx2: create eth security ctx Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 05/15] crypto/octeontx2: add security in eth dev configure Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 06/15] crypto/octeontx2: add eth security capabilities Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 07/15] crypto/octeontx2: enable CPT to share QP with ethdev Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 08/15] crypto/octeontx2: add eth security session operations Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 09/15] crypto/octeontx2: add datapath ops in eth security ctx Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 10/15] crypto/octeontx2: add lookup mem changes to hold sa indices Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 11/15] net/octeontx2: add inline ipsec rx path changes Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 12/15] drivers/octeontx2: add sec in compiler optimized RX fastpath framework Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 13/15] drivers/octeontx2: add sec in compiler optimized TX " Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 14/15] crypto/octeontx2: add inline tx path changes Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 15/15] crypto/octeontx2: sync inline tag type cfg with Rx adapter configuration Anoob Joseph
2020-01-18 14:38 ` [dpdk-dev] [PATCH v2 00/15] add OCTEONTX2 inline IPsec support Jerin Jacob
2020-01-19 10:43 ` Anoob Joseph
2020-01-19 10:53 ` Thomas Monjalon
2020-01-19 10:57 ` [dpdk-dev] [EXT] " Anoob Joseph
2020-01-22 10:16 ` [dpdk-dev] " Akhil Goyal
2020-01-22 10:55 ` Anoob Joseph
2020-01-22 12:56 ` Akhil Goyal
2020-01-22 14:18 ` Jerin Jacob
2020-01-27 2:55 ` [dpdk-dev] [EXT] " Anoob Joseph
2020-01-27 10:40 ` [dpdk-dev] " Akhil Goyal
2020-01-27 11:25 ` Jerin Jacob
2020-01-27 11:47 ` Akhil Goyal
2020-01-27 14:54 ` Anoob Joseph
2020-01-28 8:29 ` Jerin Jacob
2020-01-28 8:38 ` Akhil Goyal
2020-01-28 8:56 ` Jerin Jacob
2020-01-28 17:28 ` Ferruh Yigit
2020-01-29 4:01 ` [dpdk-dev] [EXT] " Anoob Joseph
2020-01-28 17:27 ` [dpdk-dev] " Ferruh Yigit
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 00/15] add OCTEON TX2 " Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 01/15] common/octeontx2: add CPT LF mbox for inline inbound Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 02/15] common/octeontx2: add routine to check if sec capable otx2 Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 03/15] crypto/octeontx2: configure for inline IPsec Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 04/15] net/octeontx2: create eth security ctx Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 05/15] net/octeontx2: add security in eth dev configure Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 06/15] net/octeontx2: add eth security capabilities Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 07/15] crypto/octeontx2: enable CPT to share QP with ethdev Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 08/15] net/octeontx2: add eth security session operations Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 09/15] net/octeontx2: add datapath ops in eth security ctx Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 10/15] net/octeontx2: add lookup mem changes to hold sa indices Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 11/15] net/octeontx2: add inline ipsec Rx path changes Anoob Joseph
2020-01-31 13:39 ` Akhil Goyal
2020-01-31 15:05 ` Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 12/15] drivers/octeontx2: add sec in Rx fastpath framework Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 13/15] drivers/octeontx2: add sec in Tx " Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 14/15] net/octeontx2: add inline Tx path changes Anoob Joseph
2020-01-31 13:36 ` Akhil Goyal
2020-01-31 15:33 ` Anoob Joseph
2020-02-01 9:35 ` Anoob Joseph
2020-02-03 13:25 ` Akhil Goyal
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 15/15] net/octeontx2: sync inline tag type Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 00/15] add OCTEON TX2 inline IPsec support Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 01/15] common/octeontx2: add CPT LF mbox for inline inbound Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 02/15] common/octeontx2: add routine to check if sec capable otx2 Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 03/15] crypto/octeontx2: configure for inline IPsec Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 04/15] net/octeontx2: create eth security ctx Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 05/15] net/octeontx2: add security in eth dev configure Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 06/15] net/octeontx2: add eth security capabilities Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 07/15] crypto/octeontx2: enable CPT to share QP with ethdev Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 08/15] net/octeontx2: add eth security session operations Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 09/15] net/octeontx2: add datapath ops in eth security ctx Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 10/15] net/octeontx2: add lookup mem changes to hold sa indices Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 11/15] net/octeontx2: add inline ipsec Rx path changes Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 12/15] drivers/octeontx2: add sec in Rx fastpath framework Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 13/15] drivers/octeontx2: add sec in Tx " Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 14/15] net/octeontx2: add inline Tx path changes Anoob Joseph
2020-02-05 23:19 ` Thomas Monjalon
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 15/15] net/octeontx2: sync inline tag type Anoob Joseph
2020-02-04 16:10 ` [dpdk-dev] [PATCH v4 00/15] add OCTEON TX2 inline IPsec support Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1575806094-28391-1-git-send-email-anoobj@marvell.com \
--to=anoobj@marvell.com \
--cc=adwivedi@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=kirankumark@marvell.com \
--cc=ktejasree@marvell.com \
--cc=lbartosik@marvell.com \
--cc=marchana@marvell.com \
--cc=ndabilpuram@marvell.com \
--cc=pathreya@marvell.com \
--cc=pbhagavatula@marvell.com \
--cc=thomas@monjalon.net \
--cc=vattunuru@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).