From: Anoob Joseph <anoobj@marvell.com>
To: Akhil Goyal <akhil.goyal@nxp.com>,
Radu Nicolau <radu.nicolau@intel.com>,
Thomas Monjalon <thomas@monjalon.net>
Cc: Anoob Joseph <anoobj@marvell.com>,
Jerin Jacob <jerinj@marvell.com>,
Narayana Prasad <pathreya@marvell.com>,
Ankur Dwivedi <adwivedi@marvell.com>,
Archana Muniganti <marchana@marvell.com>,
Tejasree Kondoj <ktejasree@marvell.com>,
Vamsi Attunuru <vattunuru@marvell.com>,
"Lukasz Bartosik" <lbartosik@marvell.com>,
Konstantin Ananyev <konstantin.ananyev@intel.com>, <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH 05/14] examples/ipsec-secgw: add Tx adapter support
Date: Sun, 8 Dec 2019 18:00:40 +0530 [thread overview]
Message-ID: <1575808249-31135-6-git-send-email-anoobj@marvell.com> (raw)
In-Reply-To: <1575808249-31135-1-git-send-email-anoobj@marvell.com>
Add Tx adapter support. The event helper init routine will initialize
the Tx adapter according to the configuration. If Tx adapter config
is not present it will generate a default config.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
---
examples/ipsec-secgw/event_helper.c | 326 ++++++++++++++++++++++++++++++++++++
examples/ipsec-secgw/event_helper.h | 48 ++++++
2 files changed, 374 insertions(+)
diff --git a/examples/ipsec-secgw/event_helper.c b/examples/ipsec-secgw/event_helper.c
index f0eca01..9c07cc7 100644
--- a/examples/ipsec-secgw/event_helper.c
+++ b/examples/ipsec-secgw/event_helper.c
@@ -5,6 +5,7 @@
#include <rte_ethdev.h>
#include <rte_eventdev.h>
#include <rte_event_eth_rx_adapter.h>
+#include <rte_event_eth_tx_adapter.h>
#include <rte_malloc.h>
#include "event_helper.h"
@@ -80,6 +81,22 @@ eh_get_next_active_core(struct eventmode_conf *em_conf, unsigned int prev_core)
return next_core;
}
+static struct eventdev_params *
+eh_get_eventdev_params(struct eventmode_conf *em_conf, uint8_t eventdev_id)
+{
+ int i;
+
+ for (i = 0; i < em_conf->nb_eventdev; i++) {
+ if (em_conf->eventdev_config[i].eventdev_id == eventdev_id)
+ break;
+ }
+
+ /* No match */
+ if (i == em_conf->nb_eventdev)
+ return NULL;
+
+ return &(em_conf->eventdev_config[i]);
+}
static int
eh_set_default_conf_eventdev(struct eventmode_conf *em_conf)
{
@@ -285,6 +302,99 @@ eh_set_default_conf_rx_adapter(struct eventmode_conf *em_conf)
}
static int
+eh_set_default_conf_tx_adapter(struct eventmode_conf *em_conf)
+{
+ struct tx_adapter_connection_info *conn;
+ struct eventdev_params *eventdev_config;
+ struct tx_adapter_conf *tx_adapter;
+ int eventdev_id;
+ int adapter_id;
+ int nb_eth_dev;
+ int conn_id;
+ int i;
+
+ /*
+ * Create one Tx adapter with all eth queues mapped to event queues
+ * 1:1.
+ */
+
+ if (em_conf->nb_eventdev == 0) {
+ EH_LOG_ERR("No event devs registered");
+ return -EINVAL;
+ }
+
+ /* Get the number of eth devs */
+ nb_eth_dev = rte_eth_dev_count_avail();
+
+ /* Use the first event dev */
+ eventdev_config = &(em_conf->eventdev_config[0]);
+
+ /* Get eventdev ID */
+ eventdev_id = eventdev_config->eventdev_id;
+ adapter_id = 0;
+
+ /* Get adapter conf */
+ tx_adapter = &(em_conf->tx_adapter[adapter_id]);
+
+ /* Set adapter conf */
+ tx_adapter->eventdev_id = eventdev_id;
+ tx_adapter->adapter_id = adapter_id;
+
+ /* TODO: Tx core is required only when internal port is not present */
+
+ tx_adapter->tx_core_id = eh_get_next_eth_core(em_conf);
+
+ /*
+ * Application uses one event queue per adapter for submitting
+ * packets for Tx. Reserve the last queue available and decrement
+ * the total available event queues for this
+ */
+
+ /* Queue numbers start at 0 */
+ tx_adapter->tx_ev_queue = eventdev_config->nb_eventqueue - 1;
+
+ /* Update the number of event queues available in eventdev */
+ eventdev_config->nb_eventqueue--;
+
+ /*
+ * Map all Tx queues of the eth device (port) to the event device.
+ */
+
+ /* Set defaults for connections */
+
+ /*
+ * One eth device (port) is one connection. Map all Tx queues
+ * of the device to the Tx adapter.
+ */
+
+ for (i = 0; i < nb_eth_dev; i++) {
+
+ /* Use only the ports enabled */
+ if ((em_conf->eth_portmask & (1 << i)) == 0)
+ continue;
+
+ /* Get the connection id */
+ conn_id = tx_adapter->nb_connections;
+
+ /* Get the connection */
+ conn = &(tx_adapter->conn[conn_id]);
+
+ /* Add ethdev to connections */
+ conn->ethdev_id = i;
+
+ /* Add all eth tx queues to adapter */
+ conn->ethdev_tx_qid = -1;
+
+ /* Update no of connections */
+ tx_adapter->nb_connections++;
+ }
+
+ /* We have setup one adapter */
+ em_conf->nb_tx_adapter = 1;
+ return 0;
+}
+
+static int
eh_validate_conf(struct eventmode_conf *em_conf)
{
int ret;
@@ -319,6 +429,16 @@ eh_validate_conf(struct eventmode_conf *em_conf)
return ret;
}
+ /*
+ * Check if tx adapters are specified. Else generate a default config
+ * with one tx adapter.
+ */
+ if (em_conf->nb_tx_adapter == 0) {
+ ret = eh_set_default_conf_tx_adapter(em_conf);
+ if (ret != 0)
+ return ret;
+ }
+
return 0;
}
@@ -584,6 +704,142 @@ eh_initialize_rx_adapter(struct eventmode_conf *em_conf)
return 0;
}
+static int
+eh_tx_adapter_configure(struct eventmode_conf *em_conf,
+ struct tx_adapter_conf *adapter)
+{
+ struct rte_event_dev_info evdev_default_conf = {0};
+ struct rte_event_port_conf port_conf = {0};
+ struct tx_adapter_connection_info *conn;
+ struct eventdev_params *eventdev_config;
+ uint8_t tx_port_id = 0;
+ uint8_t eventdev_id;
+ uint32_t service_id;
+ int ret, j;
+
+ /* Get event dev ID */
+ eventdev_id = adapter->eventdev_id;
+
+ /* Get event device conf */
+ eventdev_config = eh_get_eventdev_params(em_conf, eventdev_id);
+
+ /* Create Tx adapter */
+
+ /* Get default configuration of event dev */
+ ret = rte_event_dev_info_get(eventdev_id, &evdev_default_conf);
+ if (ret < 0) {
+ EH_LOG_ERR("Failed to get event dev info %d", ret);
+ return ret;
+ }
+
+ /* Setup port conf */
+ port_conf.new_event_threshold =
+ evdev_default_conf.max_num_events;
+ port_conf.dequeue_depth =
+ evdev_default_conf.max_event_port_dequeue_depth;
+ port_conf.enqueue_depth =
+ evdev_default_conf.max_event_port_enqueue_depth;
+
+ /* Create Tx adapter */
+ ret = rte_event_eth_tx_adapter_create(adapter->adapter_id,
+ adapter->eventdev_id,
+ &port_conf);
+ if (ret < 0) {
+ EH_LOG_ERR("Failed to create tx adapter %d", ret);
+ return ret;
+ }
+
+ /* Setup various connections in the adapter */
+ for (j = 0; j < adapter->nb_connections; j++) {
+
+ /* Get connection */
+ conn = &(adapter->conn[j]);
+
+ /* Add queue to the adapter */
+ ret = rte_event_eth_tx_adapter_queue_add(
+ adapter->adapter_id,
+ conn->ethdev_id,
+ conn->ethdev_tx_qid);
+ if (ret < 0) {
+ EH_LOG_ERR("Failed to add eth queue to tx adapter %d",
+ ret);
+ return ret;
+ }
+ }
+
+ /* Get event port used by the adapter */
+ ret = rte_event_eth_tx_adapter_event_port_get(
+ adapter->adapter_id,
+ &tx_port_id);
+ if (ret) {
+ EH_LOG_ERR("Failed to get tx adapter port id %d", ret);
+ return ret;
+ }
+
+ /*
+ * TODO: event queue for Tx adapter is required only if the
+ * INTERNAL PORT is not present.
+ */
+
+ /*
+ * Tx event queue is reserved for Tx adapter. Unlink this queue
+ * from all other ports
+ *
+ */
+ for (j = 0; j < eventdev_config->nb_eventport; j++) {
+ rte_event_port_unlink(eventdev_id, j,
+ &(adapter->tx_ev_queue), 1);
+ }
+
+ ret = rte_event_port_link(
+ eventdev_id,
+ tx_port_id,
+ &(adapter->tx_ev_queue),
+ NULL, 1);
+ if (ret != 1) {
+ EH_LOG_ERR("Failed to link event queue to port");
+ return ret;
+ }
+
+ /* Get the service ID used by Tx adapter */
+ ret = rte_event_eth_tx_adapter_service_id_get(adapter->adapter_id,
+ &service_id);
+ if (ret != -ESRCH && ret < 0) {
+ EH_LOG_ERR("Failed to get service id used by tx adapter %d",
+ ret);
+ return ret;
+ }
+
+ rte_service_set_runstate_mapped_check(service_id, 0);
+
+ /* Start adapter */
+ ret = rte_event_eth_tx_adapter_start(adapter->adapter_id);
+ if (ret < 0) {
+ EH_LOG_ERR("Failed to start tx adapter %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int
+eh_initialize_tx_adapter(struct eventmode_conf *em_conf)
+{
+ struct tx_adapter_conf *adapter;
+ int i, ret;
+
+ /* Configure Tx adapters */
+ for (i = 0; i < em_conf->nb_tx_adapter; i++) {
+ adapter = &(em_conf->tx_adapter[i]);
+ ret = eh_tx_adapter_configure(em_conf, adapter);
+ if (ret < 0) {
+ EH_LOG_ERR("Failed to configure tx adapter %d", ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
int32_t
eh_devs_init(struct eh_conf *conf)
{
@@ -641,6 +897,13 @@ eh_devs_init(struct eh_conf *conf)
return ret;
}
+ /* Setup Tx adapter */
+ ret = eh_initialize_tx_adapter(em_conf);
+ if (ret < 0) {
+ EH_LOG_ERR("Failed to initialize tx adapter %d", ret);
+ return ret;
+ }
+
/* Start eth devices after setting up adapter */
RTE_ETH_FOREACH_DEV(port_id) {
@@ -725,5 +988,68 @@ eh_devs_uninit(struct eh_conf *conf)
}
}
+ /* Stop and release tx adapters */
+ for (i = 0; i < em_conf->nb_tx_adapter; i++) {
+
+ id = em_conf->tx_adapter[i].adapter_id;
+ ret = rte_event_eth_tx_adapter_stop(id);
+ if (ret < 0) {
+ EH_LOG_ERR("Failed to stop tx adapter %d", ret);
+ return ret;
+ }
+
+ for (j = 0; j < em_conf->tx_adapter[i].nb_connections; j++) {
+
+ ret = rte_event_eth_tx_adapter_queue_del(id,
+ em_conf->tx_adapter[i].conn[j].ethdev_id, -1);
+ if (ret < 0) {
+ EH_LOG_ERR(
+ "Failed to remove tx adapter queues %d",
+ ret);
+ return ret;
+ }
+ }
+
+ ret = rte_event_eth_tx_adapter_free(id);
+ if (ret < 0) {
+ EH_LOG_ERR("Failed to free tx adapter %d", ret);
+ return ret;
+ }
+ }
+
return 0;
}
+
+uint8_t
+eh_get_tx_queue(struct eh_conf *conf, uint8_t eventdev_id)
+{
+ struct eventdev_params *eventdev_config;
+ struct eventmode_conf *em_conf;
+
+ if (conf == NULL) {
+ EH_LOG_ERR("Invalid event helper configuration");
+ return -EINVAL;
+ }
+
+ if (conf->mode_params == NULL) {
+ EH_LOG_ERR("Invalid event mode parameters");
+ return -EINVAL;
+ }
+
+ /* Get eventmode conf */
+ em_conf = (struct eventmode_conf *)(conf->mode_params);
+
+ /* Get event device conf */
+ eventdev_config = eh_get_eventdev_params(em_conf, eventdev_id);
+
+ if (eventdev_config == NULL) {
+ EH_LOG_ERR("Failed to read eventdev config");
+ return -EINVAL;
+ }
+
+ /*
+ * The last queue is reserved to be used as atomic queue for the
+ * last stage (eth packet tx stage)
+ */
+ return eventdev_config->nb_eventqueue - 1;
+}
diff --git a/examples/ipsec-secgw/event_helper.h b/examples/ipsec-secgw/event_helper.h
index 0f89c31..da35726 100644
--- a/examples/ipsec-secgw/event_helper.h
+++ b/examples/ipsec-secgw/event_helper.h
@@ -23,9 +23,15 @@ extern "C" {
/* Max Rx adapters supported */
#define EVENT_MODE_MAX_RX_ADAPTERS RTE_EVENT_MAX_DEVS
+/* Max Tx adapters supported */
+#define EVENT_MODE_MAX_TX_ADAPTERS RTE_EVENT_MAX_DEVS
+
/* Max Rx adapter connections */
#define EVENT_MODE_MAX_CONNECTIONS_PER_ADAPTER 16
+/* Max Tx adapter connections */
+#define EVENT_MODE_MAX_CONNECTIONS_PER_TX_ADAPTER 16
+
/* Max event queues supported per event device */
#define EVENT_MODE_MAX_EVENT_QUEUES_PER_DEV RTE_EVENT_MAX_QUEUES_PER_DEV
@@ -33,6 +39,9 @@ extern "C" {
#define EVENT_MODE_MAX_LCORE_LINKS \
(EVENT_MODE_MAX_EVENT_DEVS * EVENT_MODE_MAX_EVENT_QUEUES_PER_DEV)
+/* Max adapters that one Tx core can handle */
+#define EVENT_MODE_MAX_ADAPTERS_PER_TX_CORE EVENT_MODE_MAX_TX_ADAPTERS
+
/**
* Packet transfer mode of the application
*/
@@ -80,6 +89,23 @@ struct rx_adapter_conf {
conn[EVENT_MODE_MAX_CONNECTIONS_PER_ADAPTER];
};
+/* Tx adapter connection info */
+struct tx_adapter_connection_info {
+ uint8_t ethdev_id;
+ int32_t ethdev_tx_qid;
+};
+
+/* Tx adapter conf */
+struct tx_adapter_conf {
+ int32_t eventdev_id;
+ int32_t adapter_id;
+ uint32_t tx_core_id;
+ uint8_t nb_connections;
+ struct tx_adapter_connection_info
+ conn[EVENT_MODE_MAX_CONNECTIONS_PER_TX_ADAPTER];
+ uint8_t tx_ev_queue;
+};
+
/* Eventmode conf data */
struct eventmode_conf {
int nb_eventdev;
@@ -90,6 +116,10 @@ struct eventmode_conf {
/**< No of Rx adapters */
struct rx_adapter_conf rx_adapter[EVENT_MODE_MAX_RX_ADAPTERS];
/**< Rx adapter conf */
+ uint8_t nb_tx_adapter;
+ /**< No of Tx adapters */
+ struct tx_adapter_conf tx_adapter[EVENT_MODE_MAX_TX_ADAPTERS];
+ /** Tx adapter conf */
uint8_t nb_link;
/**< No of links */
struct eh_event_link_info
@@ -170,6 +200,24 @@ eh_devs_init(struct eh_conf *conf);
int32_t
eh_devs_uninit(struct eh_conf *conf);
+/**
+ * Get eventdev tx queue
+ *
+ * If the application uses event device which does not support internal port
+ * then it needs to submit the events to a Tx queue before final transmission.
+ * This Tx queue will be created internally by the eventmode helper subsystem,
+ * and application will need its queue ID when it runs the execution loop.
+ *
+ * @param mode_conf
+ * Event helper configuration
+ * @param eventdev_id
+ * Event device ID
+ * @return
+ * Tx queue ID
+ */
+uint8_t
+eh_get_tx_queue(struct eh_conf *conf, uint8_t eventdev_id);
+
#ifdef __cplusplus
}
#endif
--
2.7.4
next prev parent reply other threads:[~2019-12-08 12:32 UTC|newest]
Thread overview: 147+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-08 12:30 [dpdk-dev] [PATCH 00/14] add eventmode to ipsec-secgw Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 01/14] examples/ipsec-secgw: add default rte_flow for inline Rx Anoob Joseph
2019-12-16 14:20 ` Ananyev, Konstantin
2019-12-16 15:58 ` Anoob Joseph
2020-01-09 12:01 ` Lukas Bartosik
2020-01-09 19:09 ` Ananyev, Konstantin
2020-01-13 11:40 ` Ananyev, Konstantin
2019-12-08 12:30 ` [dpdk-dev] [PATCH 02/14] examples/ipsec-secgw: add framework for eventmode helper Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 03/14] examples/ipsec-secgw: add eventdev port-lcore link Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 04/14] examples/ipsec-secgw: add Rx adapter support Anoob Joseph
2019-12-11 11:33 ` Akhil Goyal
2019-12-12 5:18 ` Anoob Joseph
2019-12-23 18:48 ` Ananyev, Konstantin
2020-01-07 6:12 ` Anoob Joseph
2020-01-07 14:32 ` Ananyev, Konstantin
2019-12-08 12:30 ` Anoob Joseph [this message]
2019-12-08 12:30 ` [dpdk-dev] [PATCH 06/14] examples/ipsec-secgw: add routines to display config Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 07/14] examples/ipsec-secgw: add routines to launch workers Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 08/14] examples/ipsec-secgw: add support for internal ports Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 09/14] examples/ipsec-secgw: add eventmode to ipsec-secgw Anoob Joseph
2019-12-23 16:43 ` Ananyev, Konstantin
2020-01-03 10:18 ` Anoob Joseph
2020-01-06 15:45 ` Ananyev, Konstantin
2020-01-09 6:17 ` Anoob Joseph
2019-12-24 12:47 ` Ananyev, Konstantin
2020-01-03 10:20 ` Anoob Joseph
2020-01-06 16:50 ` Ananyev, Konstantin
2020-01-07 6:56 ` Anoob Joseph
2020-01-07 14:38 ` Ananyev, Konstantin
2019-12-08 12:30 ` [dpdk-dev] [PATCH 10/14] examples/ipsec-secgw: add app inbound worker Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 11/14] examples/ipsec-secgw: add app processing code Anoob Joseph
2019-12-23 16:49 ` Ananyev, Konstantin
2020-01-10 14:28 ` [dpdk-dev] [EXT] " Lukas Bartosik
2019-12-24 13:13 ` [dpdk-dev] " Ananyev, Konstantin
2020-01-10 14:36 ` [dpdk-dev] [EXT] " Lukas Bartosik
2019-12-25 15:18 ` [dpdk-dev] " Ananyev, Konstantin
2020-01-07 6:16 ` Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 12/14] examples/ipsec-secgw: add driver outbound worker Anoob Joseph
2019-12-23 17:28 ` Ananyev, Konstantin
2020-01-04 10:58 ` Anoob Joseph
2020-01-06 17:46 ` Ananyev, Konstantin
2020-01-07 4:32 ` Anoob Joseph
2020-01-07 14:30 ` Ananyev, Konstantin
2020-01-09 11:49 ` Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 13/14] examples/ipsec-secgw: add app " Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 14/14] examples/ipsec-secgw: add cmd line option for bufs Anoob Joseph
2019-12-23 16:14 ` Ananyev, Konstantin
2019-12-23 16:16 ` Ananyev, Konstantin
2020-01-03 5:42 ` Anoob Joseph
2020-01-06 15:21 ` Ananyev, Konstantin
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 00/12] add eventmode to ipsec-secgw Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 01/12] examples/ipsec-secgw: add default rte_flow for inline Rx Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 02/12] examples/ipsec-secgw: add framework for eventmode helper Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 03/12] examples/ipsec-secgw: add eventdev port-lcore link Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 04/12] examples/ipsec-secgw: add Rx adapter support Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 05/12] examples/ipsec-secgw: add Tx " Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 06/12] examples/ipsec-secgw: add routines to display config Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 07/12] examples/ipsec-secgw: add routines to launch workers Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 08/12] examples/ipsec-secgw: add support for internal ports Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 09/12] examples/ipsec-secgw: add eventmode to ipsec-secgw Anoob Joseph
2020-01-29 23:31 ` Ananyev, Konstantin
2020-01-30 11:04 ` [dpdk-dev] [EXT] " Lukas Bartosik
2020-01-30 11:13 ` Ananyev, Konstantin
2020-01-30 22:21 ` Ananyev, Konstantin
2020-01-31 1:09 ` Lukas Bartosik
2020-02-02 23:00 ` Lukas Bartosik
2020-02-03 7:50 ` Ananyev, Konstantin
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 10/12] examples/ipsec-secgw: add driver mode worker Anoob Joseph
2020-01-29 22:22 ` Ananyev, Konstantin
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 11/12] examples/ipsec-secgw: add app " Anoob Joseph
2020-01-29 15:34 ` Ananyev, Konstantin
2020-01-29 17:18 ` Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 12/12] examples/ipsec-secgw: add cmd line option for bufs Anoob Joseph
2020-01-29 14:40 ` Ananyev, Konstantin
2020-01-29 17:14 ` Anoob Joseph
2020-01-28 5:02 ` [dpdk-dev] [PATCH v2 00/12] add eventmode to ipsec-secgw Anoob Joseph
2020-01-28 13:00 ` Ananyev, Konstantin
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 00/13] " Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 01/13] examples/ipsec-secgw: add default rte flow for inline Rx Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 02/13] examples/ipsec-secgw: add framework for eventmode helper Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 03/13] examples/ipsec-secgw: add eventdev port-lcore link Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 04/13] examples/ipsec-secgw: add Rx adapter support Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 05/13] examples/ipsec-secgw: add Tx " Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 06/13] examples/ipsec-secgw: add routines to display config Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 07/13] examples/ipsec-secgw: add routines to launch workers Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 08/13] examples/ipsec-secgw: add support for internal ports Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 09/13] examples/ipsec-secgw: add event helper config init/uninit Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 10/13] examples/ipsec-secgw: add eventmode to ipsec-secgw Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 11/13] examples/ipsec-secgw: add driver mode worker Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 12/13] examples/ipsec-secgw: add app " Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 13/13] examples/ipsec-secgw: make number of buffers dynamic Lukasz Bartosik
2020-02-05 13:42 ` Ananyev, Konstantin
2020-02-05 16:08 ` [dpdk-dev] [EXT] " Lukas Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 00/15] add eventmode to ipsec-secgw Lukasz Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 01/15] examples/ipsec-secgw: add default rte flow for inline Rx Lukasz Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 02/15] examples/ipsec-secgw: add framework for eventmode helper Lukasz Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 03/15] examples/ipsec-secgw: add eventdev port-lcore link Lukasz Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 04/15] examples/ipsec-secgw: add Rx adapter support Lukasz Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 05/15] examples/ipsec-secgw: add Tx " Lukasz Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 06/15] examples/ipsec-secgw: add routines to display config Lukasz Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 07/15] examples/ipsec-secgw: add routines to launch workers Lukasz Bartosik
2020-02-20 8:02 ` [dpdk-dev] [PATCH v4 08/15] examples/ipsec-secgw: add support for internal ports Lukasz Bartosik
2020-02-20 8:02 ` [dpdk-dev] [PATCH v4 09/15] examples/ipsec-secgw: add event helper config init/uninit Lukasz Bartosik
2020-02-20 8:02 ` [dpdk-dev] [PATCH v4 10/15] examples/ipsec-secgw: add eventmode to ipsec-secgw Lukasz Bartosik
2020-02-20 8:02 ` [dpdk-dev] [PATCH v4 11/15] examples/ipsec-secgw: add driver mode worker Lukasz Bartosik
2020-02-20 8:02 ` [dpdk-dev] [PATCH v4 12/15] examples/ipsec-secgw: add app " Lukasz Bartosik
2020-02-24 14:13 ` Akhil Goyal
2020-02-25 11:50 ` [dpdk-dev] [EXT] " Lukas Bartosik
2020-02-25 12:13 ` Anoob Joseph
2020-02-25 16:03 ` Ananyev, Konstantin
2020-02-26 4:33 ` Anoob Joseph
2020-02-26 5:55 ` Akhil Goyal
2020-02-26 12:36 ` Ananyev, Konstantin
2020-02-26 6:04 ` Akhil Goyal
2020-02-26 10:32 ` Lukas Bartosik
2020-02-27 12:07 ` Akhil Goyal
2020-02-27 14:31 ` Lukas Bartosik
2020-02-20 8:02 ` [dpdk-dev] [PATCH v4 13/15] examples/ipsec-secgw: make number of buffers dynamic Lukasz Bartosik
2020-02-20 8:02 ` [dpdk-dev] [PATCH v4 14/15] doc: add event mode support to ipsec-secgw Lukasz Bartosik
2020-02-20 8:02 ` [dpdk-dev] [PATCH v4 15/15] examples/ipsec-secgw: reserve crypto queues in event mode Lukasz Bartosik
2020-02-24 5:20 ` [dpdk-dev] [PATCH v4 00/15] add eventmode to ipsec-secgw Anoob Joseph
2020-02-24 13:40 ` Akhil Goyal
2020-02-25 12:09 ` [dpdk-dev] [EXT] " Lukas Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 " Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 01/15] examples/ipsec-secgw: add default rte flow for inline Rx Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 02/15] examples/ipsec-secgw: add framework for eventmode helper Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 03/15] examples/ipsec-secgw: add eventdev port-lcore link Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 04/15] examples/ipsec-secgw: add Rx adapter support Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 05/15] examples/ipsec-secgw: add Tx " Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 06/15] examples/ipsec-secgw: add routines to display config Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 07/15] examples/ipsec-secgw: add routines to launch workers Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 08/15] examples/ipsec-secgw: add support for internal ports Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 09/15] examples/ipsec-secgw: add event helper config init/uninit Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 10/15] examples/ipsec-secgw: add eventmode to ipsec-secgw Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 11/15] examples/ipsec-secgw: add driver mode worker Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 12/15] examples/ipsec-secgw: add app " Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 13/15] examples/ipsec-secgw: make number of buffers dynamic Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 14/15] doc: add event mode support to ipsec-secgw Lukasz Bartosik
2020-04-12 16:37 ` Thomas Monjalon
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 15/15] examples/ipsec-secgw: reserve crypto queues in event mode Lukasz Bartosik
2020-03-02 8:47 ` [dpdk-dev] [PATCH v5 00/15] add eventmode to ipsec-secgw Anoob Joseph
2020-03-02 8:57 ` Akhil Goyal
2020-03-03 18:00 ` Ananyev, Konstantin
2020-03-12 5:32 ` Anoob Joseph
2020-03-12 5:55 ` Akhil Goyal
2020-03-12 9:57 ` [dpdk-dev] [EXT] " Lukas Bartosik
2020-03-12 13:25 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1575808249-31135-6-git-send-email-anoobj@marvell.com \
--to=anoobj@marvell.com \
--cc=adwivedi@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=konstantin.ananyev@intel.com \
--cc=ktejasree@marvell.com \
--cc=lbartosik@marvell.com \
--cc=marchana@marvell.com \
--cc=pathreya@marvell.com \
--cc=radu.nicolau@intel.com \
--cc=thomas@monjalon.net \
--cc=vattunuru@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).