From: Mahipal Challa <mchalla@marvell.com>
To: <dev@dpdk.org>
Cc: <jerinj@marvell.com>, <pathreya@marvell.com>,
<snilla@marvell.com>, <venkatn@marvell.com>, <Gavin.Hu@arm.com>
Subject: [dpdk-dev] [PATCH v3 4/6] raw/octeontx2_ep: add enqueue operation
Date: Mon, 6 Jan 2020 17:37:25 +0530 [thread overview]
Message-ID: <1578312447-17277-5-git-send-email-mchalla@marvell.com> (raw)
In-Reply-To: <1578312447-17277-1-git-send-email-mchalla@marvell.com>
Add rawdev enqueue operation for SDP VF devices.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
---
doc/guides/rawdevs/octeontx2_ep.rst | 6 +
drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c | 242 ++++++++++++++++++++++++++++++
drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h | 39 +++++
drivers/raw/octeontx2_ep/otx2_ep_rawdev.c | 1 +
drivers/raw/octeontx2_ep/otx2_ep_rawdev.h | 20 +++
drivers/raw/octeontx2_ep/otx2_ep_vf.c | 24 +++
6 files changed, 332 insertions(+)
diff --git a/doc/guides/rawdevs/octeontx2_ep.rst b/doc/guides/rawdevs/octeontx2_ep.rst
index 2507fcf..39a7c29 100644
--- a/doc/guides/rawdevs/octeontx2_ep.rst
+++ b/doc/guides/rawdevs/octeontx2_ep.rst
@@ -68,3 +68,9 @@ The following code shows how the device is configured
rte_rawdev_configure(dev_id, (rte_rawdev_obj_t)&rdev_info);
+Performing Data Transfer
+------------------------
+
+To perform data transfer using SDP VF EP rawdev devices use standard
+``rte_rawdev_enqueue_buffers()`` and ``rte_rawdev_dequeue_buffers()`` APIs.
+
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
index 584b818..6910f08 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
@@ -403,3 +403,245 @@
return -ENOMEM;
}
+static inline void
+sdp_iqreq_delete(struct sdp_device *sdpvf,
+ struct sdp_instr_queue *iq, uint32_t idx)
+{
+ uint32_t reqtype;
+ void *buf;
+
+ buf = iq->req_list[idx].buf;
+ reqtype = iq->req_list[idx].reqtype;
+
+ switch (reqtype) {
+ case SDP_REQTYPE_NORESP:
+ rte_mempool_put(sdpvf->enqdeq_mpool, buf);
+ otx2_sdp_dbg("IQ buffer freed at idx[%d]", idx);
+ break;
+
+ case SDP_REQTYPE_NORESP_GATHER:
+ case SDP_REQTYPE_NONE:
+ default:
+ otx2_info("This iqreq mode is not supported:%d", reqtype);
+
+ }
+
+ /* Reset the request list at this index */
+ iq->req_list[idx].buf = NULL;
+ iq->req_list[idx].reqtype = 0;
+}
+
+static inline void
+sdp_iqreq_add(struct sdp_instr_queue *iq, void *buf,
+ uint32_t reqtype)
+{
+ iq->req_list[iq->host_write_index].buf = buf;
+ iq->req_list[iq->host_write_index].reqtype = reqtype;
+
+ otx2_sdp_dbg("IQ buffer added at idx[%d]", iq->host_write_index);
+
+}
+
+static void
+sdp_flush_iq(struct sdp_device *sdpvf,
+ struct sdp_instr_queue *iq,
+ uint32_t pending_thresh __rte_unused)
+{
+ uint32_t instr_processed = 0;
+
+ rte_spinlock_lock(&iq->lock);
+
+ iq->otx_read_index = sdpvf->fn_list.update_iq_read_idx(iq);
+ while (iq->flush_index != iq->otx_read_index) {
+ /* Free the IQ data buffer to the pool */
+ sdp_iqreq_delete(sdpvf, iq, iq->flush_index);
+ iq->flush_index =
+ sdp_incr_index(iq->flush_index, 1, iq->nb_desc);
+
+ instr_processed++;
+ }
+
+ iq->stats.instr_processed = instr_processed;
+ rte_atomic64_sub(&iq->instr_pending, instr_processed);
+
+ rte_spinlock_unlock(&iq->lock);
+}
+
+static inline void
+sdp_ring_doorbell(struct sdp_device *sdpvf __rte_unused,
+ struct sdp_instr_queue *iq)
+{
+ otx2_write64(iq->fill_cnt, iq->doorbell_reg);
+
+ /* Make sure doorbell write goes through */
+ rte_cio_wmb();
+ iq->fill_cnt = 0;
+
+}
+
+static inline int
+post_iqcmd(struct sdp_instr_queue *iq, uint8_t *iqcmd)
+{
+ uint8_t *iqptr, cmdsize;
+
+ /* This ensures that the read index does not wrap around to
+ * the same position if queue gets full before OCTEON TX2 could
+ * fetch any instr.
+ */
+ if (rte_atomic64_read(&iq->instr_pending) >=
+ (int32_t)(iq->nb_desc - 1)) {
+ otx2_err("IQ is full, pending:%ld",
+ (long)rte_atomic64_read(&iq->instr_pending));
+
+ return SDP_IQ_SEND_FAILED;
+ }
+
+ /* Copy cmd into iq */
+ cmdsize = ((iq->iqcmd_64B) ? 64 : 32);
+ iqptr = iq->base_addr + (cmdsize * iq->host_write_index);
+
+ rte_memcpy(iqptr, iqcmd, cmdsize);
+
+ otx2_sdp_dbg("IQ cmd posted @ index:%d", iq->host_write_index);
+
+ /* Increment the host write index */
+ iq->host_write_index =
+ sdp_incr_index(iq->host_write_index, 1, iq->nb_desc);
+
+ iq->fill_cnt++;
+
+ /* Flush the command into memory. We need to be sure the data
+ * is in memory before indicating that the instruction is
+ * pending.
+ */
+ rte_io_wmb();
+ rte_atomic64_inc(&iq->instr_pending);
+
+ /* SDP_IQ_SEND_SUCCESS */
+ return 0;
+}
+
+
+static int
+sdp_send_data(struct sdp_device *sdpvf,
+ struct sdp_instr_queue *iq, void *cmd)
+{
+ uint32_t ret;
+
+ /* Lock this IQ command queue before posting instruction */
+ rte_spinlock_lock(&iq->post_lock);
+
+ /* Submit IQ command */
+ ret = post_iqcmd(iq, cmd);
+
+ if (ret == SDP_IQ_SEND_SUCCESS) {
+ sdp_ring_doorbell(sdpvf, iq);
+
+ iq->stats.instr_posted++;
+ otx2_sdp_dbg("Instr submit success posted: %ld\n",
+ (long)iq->stats.instr_posted);
+
+ } else {
+ iq->stats.instr_dropped++;
+ otx2_err("Instr submit failled, dropped: %ld\n",
+ (long)iq->stats.instr_dropped);
+
+ }
+
+ rte_spinlock_unlock(&iq->post_lock);
+
+ return ret;
+}
+
+
+/* Enqueue requests/packets to SDP IQ queue.
+ * returns number of requests enqueued successfully
+ */
+int
+sdp_rawdev_enqueue(struct rte_rawdev *rawdev,
+ struct rte_rawdev_buf **buffers __rte_unused,
+ unsigned int count, rte_rawdev_obj_t context)
+{
+ struct sdp_instr_64B *iqcmd;
+ struct sdp_instr_queue *iq;
+ struct sdp_soft_instr *si;
+ struct sdp_device *sdpvf;
+
+ struct sdp_instr_ih ihx;
+
+ sdpvf = (struct sdp_device *)rawdev->dev_private;
+ si = (struct sdp_soft_instr *)context;
+
+ iq = sdpvf->instr_queue[si->q_no];
+
+ if ((count > 1) || (count < 1)) {
+ otx2_err("This mode not supported: req[%d]", count);
+ goto enq_fail;
+ }
+
+ memset(&ihx, 0, sizeof(struct sdp_instr_ih));
+
+ iqcmd = &si->command;
+ memset(iqcmd, 0, sizeof(struct sdp_instr_64B));
+
+ iqcmd->dptr = (uint64_t)si->dptr;
+
+ /* Populate SDP IH */
+ ihx.pkind = sdpvf->pkind;
+ ihx.fsz = si->ih.fsz + 8; /* 8B for NIX IH */
+ ihx.gather = si->ih.gather;
+
+ /* Direct data instruction */
+ ihx.tlen = si->ih.tlen + ihx.fsz;
+
+ switch (ihx.gather) {
+ case 0: /* Direct data instr */
+ ihx.tlen = si->ih.tlen + ihx.fsz;
+ break;
+
+ default: /* Gather */
+ switch (si->ih.gsz) {
+ case 0: /* Direct gather instr */
+ otx2_err("Direct Gather instr : not supported");
+ goto enq_fail;
+
+ default: /* Indirect gather instr */
+ otx2_err("Indirect Gather instr : not supported");
+ goto enq_fail;
+ }
+ }
+
+ rte_memcpy(&iqcmd->ih, &ihx, sizeof(uint64_t));
+ iqcmd->rptr = (uint64_t)si->rptr;
+ rte_memcpy(&iqcmd->irh, &si->irh, sizeof(uint64_t));
+
+ /* Swap FSZ(front data) here, to avoid swapping on OCTEON TX2 side */
+ sdp_swap_8B_data(&iqcmd->rptr, 1);
+ sdp_swap_8B_data(&iqcmd->irh, 1);
+
+ otx2_sdp_dbg("After swapping");
+ otx2_sdp_dbg("Word0 [dptr]: 0x%016lx", (unsigned long)iqcmd->dptr);
+ otx2_sdp_dbg("Word1 [ihtx]: 0x%016lx", (unsigned long)iqcmd->ih);
+ otx2_sdp_dbg("Word2 [rptr]: 0x%016lx", (unsigned long)iqcmd->rptr);
+ otx2_sdp_dbg("Word3 [irh]: 0x%016lx", (unsigned long)iqcmd->irh);
+ otx2_sdp_dbg("Word4 [exhdr[0]]: 0x%016lx",
+ (unsigned long)iqcmd->exhdr[0]);
+
+ sdp_iqreq_add(iq, si->dptr, si->reqtype);
+
+ if (sdp_send_data(sdpvf, iq, iqcmd)) {
+ otx2_err("Data send failled :");
+ sdp_iqreq_delete(sdpvf, iq, iq->host_write_index);
+ goto enq_fail;
+ }
+
+ if (rte_atomic64_read(&iq->instr_pending) >= 1)
+ sdp_flush_iq(sdpvf, iq, 1 /*(iq->nb_desc / 2)*/);
+
+ /* Return no# of instructions posted successfully. */
+ return count;
+
+enq_fail:
+ return SDP_IQ_SEND_FAILED;
+}
+
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
index 4c28283..b9b7c0b 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
+++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
@@ -8,4 +8,43 @@
#include <rte_byteorder.h>
#include "otx2_ep_rawdev.h"
+#define SDP_IQ_SEND_FAILED (-1)
+#define SDP_IQ_SEND_SUCCESS (0)
+
+
+static inline uint64_t
+sdp_endian_swap_8B(uint64_t _d)
+{
+ return ((((((uint64_t)(_d)) >> 0) & (uint64_t)0xff) << 56) |
+ (((((uint64_t)(_d)) >> 8) & (uint64_t)0xff) << 48) |
+ (((((uint64_t)(_d)) >> 16) & (uint64_t)0xff) << 40) |
+ (((((uint64_t)(_d)) >> 24) & (uint64_t)0xff) << 32) |
+ (((((uint64_t)(_d)) >> 32) & (uint64_t)0xff) << 24) |
+ (((((uint64_t)(_d)) >> 40) & (uint64_t)0xff) << 16) |
+ (((((uint64_t)(_d)) >> 48) & (uint64_t)0xff) << 8) |
+ (((((uint64_t)(_d)) >> 56) & (uint64_t)0xff) << 0));
+}
+
+static inline void
+sdp_swap_8B_data(uint64_t *data, uint32_t blocks)
+{
+ /* Swap 8B blocks */
+ while (blocks) {
+ *data = sdp_endian_swap_8B(*data);
+ blocks--;
+ data++;
+ }
+}
+
+static inline uint32_t
+sdp_incr_index(uint32_t index, uint32_t count, uint32_t max)
+{
+ if ((index + count) >= max)
+ index = index + count - max;
+ else
+ index += count;
+
+ return index;
+}
+
#endif /* _OTX2_EP_ENQDEQ_H_ */
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
index 3db5a74..22a6beb 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
@@ -251,6 +251,7 @@
.dev_start = sdp_rawdev_start,
.dev_stop = sdp_rawdev_stop,
.dev_close = sdp_rawdev_close,
+ .enqueue_bufs = sdp_rawdev_enqueue,
};
static int
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
index a01f48d..8fd06fb 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
@@ -8,6 +8,10 @@
#include <rte_byteorder.h>
#include <rte_spinlock.h>
+/* IQ instruction req types */
+#define SDP_REQTYPE_NONE (0)
+#define SDP_REQTYPE_NORESP (1)
+#define SDP_REQTYPE_NORESP_GATHER (2)
/* Input Request Header format */
struct sdp_instr_irh {
@@ -128,6 +132,13 @@ struct sdp_instr_list {
};
#define SDP_IQREQ_LIST_SIZE (sizeof(struct sdp_instr_list))
+/* Input Queue statistics. Each input queue has four stats fields. */
+struct sdp_iq_stats {
+ uint64_t instr_posted; /* Instructions posted to this queue. */
+ uint64_t instr_processed; /* Instructions processed in this queue. */
+ uint64_t instr_dropped; /* Instructions that could not be processed */
+};
+
/* Structure to define the configuration attributes for each Input queue. */
struct sdp_iq_config {
/* Max number of IQs available */
@@ -195,6 +206,9 @@ struct sdp_instr_queue {
/* Number of instructions pending to be posted to OCTEON TX2. */
uint32_t fill_cnt;
+ /* Statistics for this input queue. */
+ struct sdp_iq_stats stats;
+
/* DMA mapped base address of the input descriptor ring. */
uint64_t base_addr_dma;
@@ -380,6 +394,8 @@ struct sdp_fn_list {
void (*setup_oq_regs)(struct sdp_device *sdpvf, uint32_t q_no);
int (*setup_device_regs)(struct sdp_device *sdpvf);
+ uint32_t (*update_iq_read_idx)(struct sdp_instr_queue *iq);
+
void (*enable_io_queues)(struct sdp_device *sdpvf);
void (*disable_io_queues)(struct sdp_device *sdpvf);
@@ -458,4 +474,8 @@ struct sdp_device {
int sdp_setup_oqs(struct sdp_device *sdpvf, uint32_t oq_no);
int sdp_delete_oqs(struct sdp_device *sdpvf, uint32_t oq_no);
+int sdp_rawdev_enqueue(struct rte_rawdev *dev, struct rte_rawdev_buf **buffers,
+ unsigned int count, rte_rawdev_obj_t context);
+
+
#endif /* _OTX2_EP_RAWDEV_H_ */
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_vf.c b/drivers/raw/octeontx2_ep/otx2_ep_vf.c
index 8e79fe8..c5c0bc3 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_vf.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_vf.c
@@ -409,6 +409,28 @@
sdp_vf_disable_oq(sdpvf, q_no);
}
+static uint32_t
+sdp_vf_update_read_index(struct sdp_instr_queue *iq)
+{
+ uint32_t new_idx = rte_read32(iq->inst_cnt_reg);
+
+ /* The new instr cnt reg is a 32-bit counter that can roll over.
+ * We have noted the counter's initial value at init time into
+ * reset_instr_cnt
+ */
+ if (iq->reset_instr_cnt < new_idx)
+ new_idx -= iq->reset_instr_cnt;
+ else
+ new_idx += (0xffffffff - iq->reset_instr_cnt) + 1;
+
+ /* Modulo of the new index with the IQ size will give us
+ * the new index.
+ */
+ new_idx %= iq->nb_desc;
+
+ return new_idx;
+}
+
int
sdp_vf_setup_device(struct sdp_device *sdpvf)
{
@@ -436,6 +458,8 @@
sdpvf->fn_list.setup_oq_regs = sdp_vf_setup_oq_regs;
sdpvf->fn_list.setup_device_regs = sdp_vf_setup_device_regs;
+ sdpvf->fn_list.update_iq_read_idx = sdp_vf_update_read_index;
+
sdpvf->fn_list.enable_io_queues = sdp_vf_enable_io_queues;
sdpvf->fn_list.disable_io_queues = sdp_vf_disable_io_queues;
--
1.8.3.1
next prev parent reply other threads:[~2020-01-06 12:08 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-06 12:07 [dpdk-dev] [PATCH v3 0/6] OCTEON TX2 End Point Driver Mahipal Challa
2020-01-06 12:07 ` [dpdk-dev] [PATCH v3 1/6] raw/octeontx2_ep: add build infra and device probe Mahipal Challa
2020-01-06 12:07 ` [dpdk-dev] [PATCH v3 2/6] raw/octeontx2_ep: add device configuration Mahipal Challa
2020-01-07 6:01 ` Gavin Hu
2020-01-07 6:46 ` Mahipal Challa
2020-01-06 12:07 ` [dpdk-dev] [PATCH v3 3/6] raw/octeontx2_ep: add device uninitialization Mahipal Challa
2020-01-06 12:07 ` Mahipal Challa [this message]
2020-01-07 5:55 ` [dpdk-dev] [PATCH v3 4/6] raw/octeontx2_ep: add enqueue operation Gavin Hu
2020-01-07 7:03 ` Mahipal Challa
2020-01-06 12:07 ` [dpdk-dev] [PATCH v3 5/6] raw/octeontx2_ep: add dequeue operation Mahipal Challa
2020-01-07 5:42 ` Gavin Hu
2020-01-07 7:18 ` Mahipal Challa
2020-01-06 12:07 ` [dpdk-dev] [PATCH v3 6/6] raw/octeontx2_ep: add driver self test Mahipal Challa
2020-01-07 2:42 ` Gavin Hu
2020-01-07 4:14 ` Mahipal Challa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1578312447-17277-5-git-send-email-mchalla@marvell.com \
--to=mchalla@marvell.com \
--cc=Gavin.Hu@arm.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=pathreya@marvell.com \
--cc=snilla@marvell.com \
--cc=venkatn@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).