From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from dpdk.org (dpdk.org [92.243.14.124]) by inbox.dpdk.org (Postfix) with ESMTP id 9BCA2A04F0; Mon, 13 Jan 2020 07:01:25 +0100 (CET) Received: from [92.243.14.124] (localhost [127.0.0.1]) by dpdk.org (Postfix) with ESMTP id 7460C1D60E; Mon, 13 Jan 2020 07:01:12 +0100 (CET) Received: from mx0b-0016f401.pphosted.com (mx0a-0016f401.pphosted.com [67.231.148.174]) by dpdk.org (Postfix) with ESMTP id 10FD01D604 for ; Mon, 13 Jan 2020 07:01:09 +0100 (CET) Received: from pps.filterd (m0045849.ppops.net [127.0.0.1]) by mx0a-0016f401.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id 00D60Hmb021432; Sun, 12 Jan 2020 22:01:06 -0800 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=marvell.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=pfpt0818; bh=hBfqjD5qNzDCVwc3ry14I6Pm2zDDIdiA8SoAnej1Exo=; b=XBw4A/4pHtE6ZJ4k0NNVa4sIu+ZIcQqtmQdiJNQFqjmIGjhtb/11JX/lw6zSa8PkgqHO 8JJHSwEUhkbs60mzEb1oO2j7Ba1KiR5j5ctjmIIy8b5YZEaxCiqePbz2/YXJO2qq7V/Z 7Mxl7QoKf1aA2IR0+7E/ON4jO1mANFD14FuXx2SvSMgwHyoIsHYDfhUHkVyuZ7EEDZ5x nYx29eCt3ZyMpvCrkNRxTlFLRbxGmbZOm8J1BV6Bgwfqg7L0nwu0nL3lHatvz/sgwhu8 XE+L9ojHUWnGQW2RKTaA3L4QiQtuuvojDiIhRGW60eQzXANzI/It1wVIfpddfqpPVIzd zw== Received: from sc-exch01.marvell.com ([199.233.58.181]) by mx0a-0016f401.pphosted.com with ESMTP id 2xfckumuks-2 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-SHA384 bits=256 verify=NOT); Sun, 12 Jan 2020 22:01:06 -0800 Received: from SC-EXCH01.marvell.com (10.93.176.81) by SC-EXCH01.marvell.com (10.93.176.81) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Sun, 12 Jan 2020 22:01:05 -0800 Received: from maili.marvell.com (10.93.176.43) by SC-EXCH01.marvell.com (10.93.176.81) with Microsoft SMTP Server id 15.0.1497.2 via Frontend Transport; Sun, 12 Jan 2020 22:01:05 -0800 Received: from hyd1244.marvell.com (hyd1244.marvell.com [10.29.20.28]) by maili.marvell.com (Postfix) with ESMTP id B664D3F7071; Sun, 12 Jan 2020 22:01:02 -0800 (PST) From: Mahipal Challa To: , CC: , , , , Date: Mon, 13 Jan 2020 11:30:37 +0530 Message-ID: <1578895241-22229-3-git-send-email-mchalla@marvell.com> X-Mailer: git-send-email 1.8.3.1 In-Reply-To: <1578895241-22229-1-git-send-email-mchalla@marvell.com> References: <1578895241-22229-1-git-send-email-mchalla@marvell.com> MIME-Version: 1.0 Content-Type: text/plain X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.138, 18.0.572 definitions=2020-01-13_01:2020-01-13, 2020-01-13 signatures=0 Subject: [dpdk-dev] [PATCH v5 2/6] raw/octeontx2_ep: add device configuration X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" Register "dev_configure" API to configure/initialize the SDP VF PCIe devices. Signed-off-by: Mahipal Challa --- doc/guides/rawdevs/octeontx2_ep.rst | 29 ++ drivers/common/octeontx2/hw/otx2_sdp.h | 184 +++++++++ drivers/common/octeontx2/otx2_common.c | 9 + drivers/common/octeontx2/otx2_common.h | 4 + .../octeontx2/rte_common_octeontx2_version.map | 6 + drivers/raw/octeontx2_ep/Makefile | 3 + drivers/raw/octeontx2_ep/meson.build | 4 +- drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c | 294 ++++++++++++++ drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h | 11 + drivers/raw/octeontx2_ep/otx2_ep_rawdev.c | 148 +++++++ drivers/raw/octeontx2_ep/otx2_ep_rawdev.h | 434 ++++++++++++++++++++- drivers/raw/octeontx2_ep/otx2_ep_vf.c | 408 +++++++++++++++++++ drivers/raw/octeontx2_ep/otx2_ep_vf.h | 10 + 13 files changed, 1542 insertions(+), 2 deletions(-) diff --git a/doc/guides/rawdevs/octeontx2_ep.rst b/doc/guides/rawdevs/octeontx2_ep.rst index 5f5ed01..2507fcf 100644 --- a/doc/guides/rawdevs/octeontx2_ep.rst +++ b/doc/guides/rawdevs/octeontx2_ep.rst @@ -39,3 +39,32 @@ entry `sriov_numvfs` for the corresponding PF driver. Once the required VFs are enabled, to be accessible from DPDK, VFs need to be bound to vfio-pci driver. + +Device Setup +------------ + +The OCTEON TX2 SDP End Point VF devices will need to be bound to a +user-space IO driver for use. The script ``dpdk-devbind.py`` script +included with DPDK can be used to view the state of the devices and to bind +them to a suitable DPDK-supported kernel driver. When querying the status +of the devices, they will appear under the category of "Misc (rawdev) +devices", i.e. the command ``dpdk-devbind.py --status-dev misc`` can be +used to see the state of those devices alone. + +Device Configuration +-------------------- + +Configuring SDP EP rawdev device is done using the ``rte_rawdev_configure()`` +API, which takes the mempool as parameter. PMD uses this pool to send/receive +packets to/from the HW. + +The following code shows how the device is configured + +.. code-block:: c + + struct sdp_rawdev_info config = {0}; + struct rte_rawdev_info rdev_info = {.dev_private = &config}; + config.enqdeq_mpool = (void *)rte_mempool_create(...); + + rte_rawdev_configure(dev_id, (rte_rawdev_obj_t)&rdev_info); + diff --git a/drivers/common/octeontx2/hw/otx2_sdp.h b/drivers/common/octeontx2/hw/otx2_sdp.h new file mode 100644 index 0000000..1e690f8 --- /dev/null +++ b/drivers/common/octeontx2/hw/otx2_sdp.h @@ -0,0 +1,184 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(C) 2019 Marvell International Ltd. + */ + +#ifndef __OTX2_SDP_HW_H_ +#define __OTX2_SDP_HW_H_ + +/* SDP VF IOQs */ +#define SDP_MIN_RINGS_PER_VF (1) +#define SDP_MAX_RINGS_PER_VF (8) + +/* SDP VF IQ configuration */ +#define SDP_VF_MAX_IQ_DESCRIPTORS (512) +#define SDP_VF_MIN_IQ_DESCRIPTORS (128) + +#define SDP_VF_DB_MIN (1) +#define SDP_VF_DB_TIMEOUT (1) +#define SDP_VF_INTR_THRESHOLD (0xFFFFFFFF) + +#define SDP_VF_64BYTE_INSTR (64) +#define SDP_VF_32BYTE_INSTR (32) + +/* SDP VF OQ configuration */ +#define SDP_VF_MAX_OQ_DESCRIPTORS (512) +#define SDP_VF_MIN_OQ_DESCRIPTORS (128) +#define SDP_VF_OQ_BUF_SIZE (2048) +#define SDP_VF_OQ_REFIL_THRESHOLD (16) + +#define SDP_VF_OQ_INFOPTR_MODE (1) +#define SDP_VF_OQ_BUFPTR_MODE (0) + +#define SDP_VF_OQ_INTR_PKT (1) +#define SDP_VF_OQ_INTR_TIME (10) +#define SDP_VF_CFG_IO_QUEUES SDP_MAX_RINGS_PER_VF + +/* Wait time in milliseconds for FLR */ +#define SDP_VF_PCI_FLR_WAIT (100) +#define SDP_VF_BUSY_LOOP_COUNT (10000) + +#define SDP_VF_MAX_IO_QUEUES SDP_MAX_RINGS_PER_VF +#define SDP_VF_MIN_IO_QUEUES SDP_MIN_RINGS_PER_VF + +/* SDP VF IOQs per rawdev */ +#define SDP_VF_MAX_IOQS_PER_RAWDEV SDP_VF_MAX_IO_QUEUES +#define SDP_VF_DEFAULT_IOQS_PER_RAWDEV SDP_VF_MIN_IO_QUEUES + +/* SDP VF Register definitions */ +#define SDP_VF_RING_OFFSET (0x1ull << 17) + +/* SDP VF IQ Registers */ +#define SDP_VF_R_IN_CONTROL_START (0x10000) +#define SDP_VF_R_IN_ENABLE_START (0x10010) +#define SDP_VF_R_IN_INSTR_BADDR_START (0x10020) +#define SDP_VF_R_IN_INSTR_RSIZE_START (0x10030) +#define SDP_VF_R_IN_INSTR_DBELL_START (0x10040) +#define SDP_VF_R_IN_CNTS_START (0x10050) +#define SDP_VF_R_IN_INT_LEVELS_START (0x10060) +#define SDP_VF_R_IN_PKT_CNT_START (0x10080) +#define SDP_VF_R_IN_BYTE_CNT_START (0x10090) + +#define SDP_VF_R_IN_CONTROL(ring) \ + (SDP_VF_R_IN_CONTROL_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_IN_ENABLE(ring) \ + (SDP_VF_R_IN_ENABLE_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_IN_INSTR_BADDR(ring) \ + (SDP_VF_R_IN_INSTR_BADDR_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_IN_INSTR_RSIZE(ring) \ + (SDP_VF_R_IN_INSTR_RSIZE_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_IN_INSTR_DBELL(ring) \ + (SDP_VF_R_IN_INSTR_DBELL_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_IN_CNTS(ring) \ + (SDP_VF_R_IN_CNTS_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_IN_INT_LEVELS(ring) \ + (SDP_VF_R_IN_INT_LEVELS_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_IN_PKT_CNT(ring) \ + (SDP_VF_R_IN_PKT_CNT_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_IN_BYTE_CNT(ring) \ + (SDP_VF_R_IN_BYTE_CNT_START + ((ring) * SDP_VF_RING_OFFSET)) + +/* SDP VF IQ Masks */ +#define SDP_VF_R_IN_CTL_RPVF_MASK (0xF) +#define SDP_VF_R_IN_CTL_RPVF_POS (48) + +#define SDP_VF_R_IN_CTL_IDLE (0x1ull << 28) +#define SDP_VF_R_IN_CTL_RDSIZE (0x3ull << 25) /* Setting to max(4) */ +#define SDP_VF_R_IN_CTL_IS_64B (0x1ull << 24) +#define SDP_VF_R_IN_CTL_D_NSR (0x1ull << 8) +#define SDP_VF_R_IN_CTL_D_ESR (0x1ull << 6) +#define SDP_VF_R_IN_CTL_D_ROR (0x1ull << 5) +#define SDP_VF_R_IN_CTL_NSR (0x1ull << 3) +#define SDP_VF_R_IN_CTL_ESR (0x1ull << 1) +#define SDP_VF_R_IN_CTL_ROR (0x1ull << 0) + +#define SDP_VF_R_IN_CTL_MASK \ + (SDP_VF_R_IN_CTL_RDSIZE | SDP_VF_R_IN_CTL_IS_64B) + +/* SDP VF OQ Registers */ +#define SDP_VF_R_OUT_CNTS_START (0x10100) +#define SDP_VF_R_OUT_INT_LEVELS_START (0x10110) +#define SDP_VF_R_OUT_SLIST_BADDR_START (0x10120) +#define SDP_VF_R_OUT_SLIST_RSIZE_START (0x10130) +#define SDP_VF_R_OUT_SLIST_DBELL_START (0x10140) +#define SDP_VF_R_OUT_CONTROL_START (0x10150) +#define SDP_VF_R_OUT_ENABLE_START (0x10160) +#define SDP_VF_R_OUT_PKT_CNT_START (0x10180) +#define SDP_VF_R_OUT_BYTE_CNT_START (0x10190) + +#define SDP_VF_R_OUT_CONTROL(ring) \ + (SDP_VF_R_OUT_CONTROL_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_OUT_ENABLE(ring) \ + (SDP_VF_R_OUT_ENABLE_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_OUT_SLIST_BADDR(ring) \ + (SDP_VF_R_OUT_SLIST_BADDR_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_OUT_SLIST_RSIZE(ring) \ + (SDP_VF_R_OUT_SLIST_RSIZE_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_OUT_SLIST_DBELL(ring) \ + (SDP_VF_R_OUT_SLIST_DBELL_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_OUT_CNTS(ring) \ + (SDP_VF_R_OUT_CNTS_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_OUT_INT_LEVELS(ring) \ + (SDP_VF_R_OUT_INT_LEVELS_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_OUT_PKT_CNT(ring) \ + (SDP_VF_R_OUT_PKT_CNT_START + ((ring) * SDP_VF_RING_OFFSET)) + +#define SDP_VF_R_OUT_BYTE_CNT(ring) \ + (SDP_VF_R_OUT_BYTE_CNT_START + ((ring) * SDP_VF_RING_OFFSET)) + +/* SDP VF OQ Masks */ +#define SDP_VF_R_OUT_CTL_IDLE (1ull << 40) +#define SDP_VF_R_OUT_CTL_ES_I (1ull << 34) +#define SDP_VF_R_OUT_CTL_NSR_I (1ull << 33) +#define SDP_VF_R_OUT_CTL_ROR_I (1ull << 32) +#define SDP_VF_R_OUT_CTL_ES_D (1ull << 30) +#define SDP_VF_R_OUT_CTL_NSR_D (1ull << 29) +#define SDP_VF_R_OUT_CTL_ROR_D (1ull << 28) +#define SDP_VF_R_OUT_CTL_ES_P (1ull << 26) +#define SDP_VF_R_OUT_CTL_NSR_P (1ull << 25) +#define SDP_VF_R_OUT_CTL_ROR_P (1ull << 24) +#define SDP_VF_R_OUT_CTL_IMODE (1ull << 23) + +#define SDP_VF_R_OUT_INT_LEVELS_BMODE (1ull << 63) +#define SDP_VF_R_OUT_INT_LEVELS_TIMET (32) + +/* SDP Instruction Header */ +struct sdp_instr_ih { + /* Data Len */ + uint64_t tlen:16; + + /* Reserved1 */ + uint64_t rsvd1:20; + + /* PKIND for SDP */ + uint64_t pkind:6; + + /* Front Data size */ + uint64_t fsz:6; + + /* No. of entries in gather list */ + uint64_t gsz:14; + + /* Gather indicator */ + uint64_t gather:1; + + /* Reserved2 */ + uint64_t rsvd2:1; +} __rte_packed; + +#endif /* __OTX2_SDP_HW_H_ */ + diff --git a/drivers/common/octeontx2/otx2_common.c b/drivers/common/octeontx2/otx2_common.c index 7e45366..1a257cf 100644 --- a/drivers/common/octeontx2/otx2_common.c +++ b/drivers/common/octeontx2/otx2_common.c @@ -205,6 +205,10 @@ int otx2_npa_lf_obj_ref(void) * @internal */ int otx2_logtype_dpi; +/** + * @internal + */ +int otx2_logtype_ep; RTE_INIT(otx2_log_init); static void @@ -245,4 +249,9 @@ int otx2_npa_lf_obj_ref(void) otx2_logtype_dpi = rte_log_register("pmd.raw.octeontx2.dpi"); if (otx2_logtype_dpi >= 0) rte_log_set_level(otx2_logtype_dpi, RTE_LOG_NOTICE); + + otx2_logtype_ep = rte_log_register("pmd.raw.octeontx2.ep"); + if (otx2_logtype_ep >= 0) + rte_log_set_level(otx2_logtype_ep, RTE_LOG_NOTICE); + } diff --git a/drivers/common/octeontx2/otx2_common.h b/drivers/common/octeontx2/otx2_common.h index f62c45d..6bc55ca 100644 --- a/drivers/common/octeontx2/otx2_common.h +++ b/drivers/common/octeontx2/otx2_common.h @@ -16,6 +16,7 @@ #include "hw/otx2_nix.h" #include "hw/otx2_npc.h" #include "hw/otx2_npa.h" +#include "hw/otx2_sdp.h" #include "hw/otx2_sso.h" #include "hw/otx2_ssow.h" #include "hw/otx2_tim.h" @@ -85,6 +86,7 @@ struct otx2_idev_cfg { extern int otx2_logtype_tm; extern int otx2_logtype_tim; extern int otx2_logtype_dpi; +extern int otx2_logtype_ep; #define otx2_err(fmt, args...) \ RTE_LOG(ERR, PMD, "%s():%u " fmt "\n", \ @@ -107,6 +109,7 @@ struct otx2_idev_cfg { #define otx2_tm_dbg(fmt, ...) otx2_dbg(tm, fmt, ##__VA_ARGS__) #define otx2_tim_dbg(fmt, ...) otx2_dbg(tim, fmt, ##__VA_ARGS__) #define otx2_dpi_dbg(fmt, ...) otx2_dbg(dpi, fmt, ##__VA_ARGS__) +#define otx2_sdp_dbg(fmt, ...) otx2_dbg(ep, fmt, ##__VA_ARGS__) /* PCI IDs */ #define PCI_VENDOR_ID_CAVIUM 0x177D @@ -121,6 +124,7 @@ struct otx2_idev_cfg { #define PCI_DEVID_OCTEONTX2_RVU_CPT_VF 0xA0FE #define PCI_DEVID_OCTEONTX2_RVU_AF_VF 0xA0f8 #define PCI_DEVID_OCTEONTX2_DPI_VF 0xA081 +#define PCI_DEVID_OCTEONTX2_EP_VF 0xB203 /* OCTEON TX2 EP mode */ #define PCI_DEVID_OCTEONTX2_RVU_SDP_PF 0xA0f6 #define PCI_DEVID_OCTEONTX2_RVU_SDP_VF 0xA0f7 diff --git a/drivers/common/octeontx2/rte_common_octeontx2_version.map b/drivers/common/octeontx2/rte_common_octeontx2_version.map index adad21a..a51d719 100644 --- a/drivers/common/octeontx2/rte_common_octeontx2_version.map +++ b/drivers/common/octeontx2/rte_common_octeontx2_version.map @@ -33,3 +33,9 @@ DPDK_20.0 { local: *; }; + +EXPERIMENTAL { + global: + + otx2_logtype_ep; +}; diff --git a/drivers/raw/octeontx2_ep/Makefile b/drivers/raw/octeontx2_ep/Makefile index 8cec6bd..02853fb 100644 --- a/drivers/raw/octeontx2_ep/Makefile +++ b/drivers/raw/octeontx2_ep/Makefile @@ -36,5 +36,8 @@ LIBABIVER := 1 # All source are stored in SRCS-y # SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_rawdev.c +SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_enqdeq.c +SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_vf.c + include $(RTE_SDK)/mk/rte.lib.mk diff --git a/drivers/raw/octeontx2_ep/meson.build b/drivers/raw/octeontx2_ep/meson.build index e513131..99e6c6d 100644 --- a/drivers/raw/octeontx2_ep/meson.build +++ b/drivers/raw/octeontx2_ep/meson.build @@ -3,4 +3,6 @@ # deps += ['bus_pci', 'common_octeontx2', 'rawdev'] -sources = files('otx2_ep_rawdev.c') +sources = files('otx2_ep_rawdev.c', + 'otx2_ep_enqdeq.c', + 'otx2_ep_vf.c') diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c new file mode 100644 index 0000000..8857004 --- /dev/null +++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c @@ -0,0 +1,294 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(C) 2019 Marvell International Ltd. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "otx2_common.h" +#include "otx2_ep_enqdeq.h" + +/* IQ initialization */ +static int +sdp_init_instr_queue(struct sdp_device *sdpvf, int iq_no) +{ + const struct sdp_config *conf; + struct sdp_instr_queue *iq; + uint32_t q_size; + + conf = sdpvf->conf; + iq = sdpvf->instr_queue[iq_no]; + q_size = conf->iq.instr_type * conf->num_iqdef_descs; + + /* IQ memory creation for Instruction submission to OCTEON TX2 */ + iq->iq_mz = rte_memzone_reserve_aligned("iqmz", + q_size, + rte_socket_id(), + RTE_MEMZONE_IOVA_CONTIG, + RTE_CACHE_LINE_SIZE); + if (iq->iq_mz == NULL) { + otx2_err("IQ[%d] memzone alloc failed", iq_no); + goto iq_init_fail; + } + + iq->base_addr_dma = iq->iq_mz->iova; + iq->base_addr = (uint8_t *)iq->iq_mz->addr; + + if (conf->num_iqdef_descs & (conf->num_iqdef_descs - 1)) { + otx2_err("IQ[%d] descs not in power of 2", iq_no); + goto iq_init_fail; + } + + iq->nb_desc = conf->num_iqdef_descs; + + /* Create a IQ request list to hold requests that have been + * posted to OCTEON TX2. This list will be used for freeing the IQ + * data buffer(s) later once the OCTEON TX2 fetched the requests. + */ + iq->req_list = rte_zmalloc_socket("request_list", + (iq->nb_desc * SDP_IQREQ_LIST_SIZE), + RTE_CACHE_LINE_SIZE, + rte_socket_id()); + if (iq->req_list == NULL) { + otx2_err("IQ[%d] req_list alloc failed", iq_no); + goto iq_init_fail; + } + + otx2_info("IQ[%d]: base: %p basedma: %lx count: %d", + iq_no, iq->base_addr, (unsigned long)iq->base_addr_dma, + iq->nb_desc); + + iq->sdp_dev = sdpvf; + iq->q_no = iq_no; + iq->fill_cnt = 0; + iq->host_write_index = 0; + iq->otx_read_index = 0; + iq->flush_index = 0; + + /* Initialize the spinlock for this instruction queue */ + rte_spinlock_init(&iq->lock); + rte_spinlock_init(&iq->post_lock); + + rte_atomic64_clear(&iq->iq_flush_running); + + sdpvf->io_qmask.iq |= (1ull << iq_no); + + /* Set 32B/64B mode for each input queue */ + if (conf->iq.instr_type == 64) + sdpvf->io_qmask.iq64B |= (1ull << iq_no); + + iq->iqcmd_64B = (conf->iq.instr_type == 64); + + /* Set up IQ registers */ + sdpvf->fn_list.setup_iq_regs(sdpvf, iq_no); + + return 0; + +iq_init_fail: + return -ENOMEM; + +} + +int +sdp_setup_iqs(struct sdp_device *sdpvf, uint32_t iq_no) +{ + struct sdp_instr_queue *iq; + + iq = (struct sdp_instr_queue *)rte_zmalloc("sdp_IQ", sizeof(*iq), + RTE_CACHE_LINE_SIZE); + if (iq == NULL) + return -ENOMEM; + + sdpvf->instr_queue[iq_no] = iq; + + if (sdp_init_instr_queue(sdpvf, iq_no)) { + otx2_err("IQ init is failed"); + goto delete_IQ; + } + otx2_info("IQ[%d] is created.", sdpvf->num_iqs); + + sdpvf->num_iqs++; + + + return 0; + +delete_IQ: + return -ENOMEM; +} + +static void +sdp_droq_reset_indices(struct sdp_droq *droq) +{ + droq->read_idx = 0; + droq->write_idx = 0; + droq->refill_idx = 0; + droq->refill_count = 0; + rte_atomic64_set(&droq->pkts_pending, 0); +} + +static int +sdp_droq_setup_ring_buffers(struct sdp_device *sdpvf, + struct sdp_droq *droq) +{ + struct sdp_droq_desc *desc_ring = droq->desc_ring; + uint32_t idx; + void *buf; + + for (idx = 0; idx < droq->nb_desc; idx++) { + rte_mempool_get(sdpvf->enqdeq_mpool, &buf); + if (buf == NULL) { + otx2_err("OQ buffer alloc failed"); + /* sdp_droq_destroy_ring_buffers(droq);*/ + return -ENOMEM; + } + + droq->recv_buf_list[idx].buffer = buf; + droq->info_list[idx].length = 0; + + /* Map ring buffers into memory */ + desc_ring[idx].info_ptr = (uint64_t)(droq->info_list_dma + + (idx * SDP_DROQ_INFO_SIZE)); + + desc_ring[idx].buffer_ptr = rte_mem_virt2iova(buf); + } + + sdp_droq_reset_indices(droq); + + return 0; +} + +static void * +sdp_alloc_info_buffer(struct sdp_device *sdpvf __rte_unused, + struct sdp_droq *droq) +{ + droq->info_mz = rte_memzone_reserve_aligned("OQ_info_list", + (droq->nb_desc * SDP_DROQ_INFO_SIZE), + rte_socket_id(), + RTE_MEMZONE_IOVA_CONTIG, + RTE_CACHE_LINE_SIZE); + + if (droq->info_mz == NULL) + return NULL; + + droq->info_list_dma = droq->info_mz->iova; + droq->info_alloc_size = droq->info_mz->len; + droq->info_base_addr = (size_t)droq->info_mz->addr; + + return droq->info_mz->addr; +} + +/* OQ initialization */ +static int +sdp_init_droq(struct sdp_device *sdpvf, uint32_t q_no) +{ + const struct sdp_config *conf = sdpvf->conf; + uint32_t c_refill_threshold; + uint32_t desc_ring_size; + struct sdp_droq *droq; + + otx2_info("OQ[%d] Init start", q_no); + + droq = sdpvf->droq[q_no]; + droq->sdp_dev = sdpvf; + droq->q_no = q_no; + + c_refill_threshold = conf->oq.refill_threshold; + droq->nb_desc = conf->num_oqdef_descs; + droq->buffer_size = conf->oqdef_buf_size; + + /* OQ desc_ring set up */ + desc_ring_size = droq->nb_desc * SDP_DROQ_DESC_SIZE; + droq->desc_ring_mz = rte_memzone_reserve_aligned("sdp_oqmz", + desc_ring_size, + rte_socket_id(), + RTE_MEMZONE_IOVA_CONTIG, + RTE_CACHE_LINE_SIZE); + + if (droq->desc_ring_mz == NULL) { + otx2_err("OQ:%d desc_ring allocation failed", q_no); + goto init_droq_fail; + } + + droq->desc_ring_dma = droq->desc_ring_mz->iova; + droq->desc_ring = (struct sdp_droq_desc *)droq->desc_ring_mz->addr; + + otx2_sdp_dbg("OQ[%d]: desc_ring: virt: 0x%p, dma: %lx", + q_no, droq->desc_ring, (unsigned long)droq->desc_ring_dma); + otx2_sdp_dbg("OQ[%d]: num_desc: %d", q_no, droq->nb_desc); + + + /* OQ info_list set up */ + droq->info_list = sdp_alloc_info_buffer(sdpvf, droq); + if (droq->info_list == NULL) { + otx2_err("memory allocation failed for OQ[%d] info_list", q_no); + goto init_droq_fail; + } + + /* OQ buf_list set up */ + droq->recv_buf_list = rte_zmalloc_socket("recv_buf_list", + (droq->nb_desc * SDP_DROQ_RECVBUF_SIZE), + RTE_CACHE_LINE_SIZE, rte_socket_id()); + if (droq->recv_buf_list == NULL) { + otx2_err("OQ recv_buf_list alloc failed"); + goto init_droq_fail; + } + + if (sdp_droq_setup_ring_buffers(sdpvf, droq)) + goto init_droq_fail; + + droq->refill_threshold = c_refill_threshold; + rte_spinlock_init(&droq->lock); + + + /* Set up OQ registers */ + sdpvf->fn_list.setup_oq_regs(sdpvf, q_no); + + sdpvf->io_qmask.oq |= (1ull << q_no); + + return 0; + +init_droq_fail: + return -ENOMEM; +} + +/* OQ configuration and setup */ +int +sdp_setup_oqs(struct sdp_device *sdpvf, uint32_t oq_no) +{ + struct sdp_droq *droq; + + /* Allocate new droq. */ + droq = (struct sdp_droq *)rte_zmalloc("sdp_OQ", + sizeof(*droq), RTE_CACHE_LINE_SIZE); + if (droq == NULL) { + otx2_err("Droq[%d] Creation Failed", oq_no); + return -ENOMEM; + } + sdpvf->droq[oq_no] = droq; + + if (sdp_init_droq(sdpvf, oq_no)) { + otx2_err("Droq[%d] Initialization failed", oq_no); + goto delete_OQ; + } + otx2_info("OQ[%d] is created.", oq_no); + + sdpvf->num_oqs++; + + return 0; + +delete_OQ: + return -ENOMEM; +} diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h new file mode 100644 index 0000000..4c28283 --- /dev/null +++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(C) 2019 Marvell International Ltd. + */ + +#ifndef _OTX2_EP_ENQDEQ_H_ +#define _OTX2_EP_ENQDEQ_H_ + +#include +#include "otx2_ep_rawdev.h" + +#endif /* _OTX2_EP_ENQDEQ_H_ */ diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c index 04b4fac..0c56609 100644 --- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c +++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c @@ -17,6 +17,7 @@ #include "otx2_common.h" #include "otx2_ep_rawdev.h" +#include "otx2_ep_vf.h" static const struct rte_pci_id pci_sdp_vf_map[] = { { @@ -28,6 +29,152 @@ }, }; +/* SDP_VF default configuration */ +const struct sdp_config default_sdp_conf = { + /* IQ attributes */ + .iq = { + .max_iqs = SDP_VF_CFG_IO_QUEUES, + .instr_type = SDP_VF_64BYTE_INSTR, + .pending_list_size = (SDP_VF_MAX_IQ_DESCRIPTORS * + SDP_VF_CFG_IO_QUEUES), + }, + + /* OQ attributes */ + .oq = { + .max_oqs = SDP_VF_CFG_IO_QUEUES, + .info_ptr = SDP_VF_OQ_INFOPTR_MODE, + .refill_threshold = SDP_VF_OQ_REFIL_THRESHOLD, + }, + + .num_iqdef_descs = SDP_VF_MAX_IQ_DESCRIPTORS, + .num_oqdef_descs = SDP_VF_MAX_OQ_DESCRIPTORS, + .oqdef_buf_size = SDP_VF_OQ_BUF_SIZE, + +}; + +const struct sdp_config* +sdp_get_defconf(struct sdp_device *sdp_dev __rte_unused) +{ + const struct sdp_config *default_conf = NULL; + + default_conf = &default_sdp_conf; + + return default_conf; +} + +static int +sdp_chip_specific_setup(struct sdp_device *sdpvf) +{ + struct rte_pci_device *pdev = sdpvf->pci_dev; + uint32_t dev_id = pdev->id.device_id; + int ret; + + switch (dev_id) { + case PCI_DEVID_OCTEONTX2_EP_VF: + sdpvf->chip_id = PCI_DEVID_OCTEONTX2_EP_VF; + ret = sdp_vf_setup_device(sdpvf); + + break; + default: + otx2_err("Unsupported device"); + ret = -EINVAL; + } + + if (!ret) + otx2_info("SDP dev_id[%d]", dev_id); + + return ret; +} + +/* SDP VF device initialization */ +static int +sdp_vfdev_init(struct sdp_device *sdpvf) +{ + uint32_t rawdev_queues, q; + + if (sdp_chip_specific_setup(sdpvf)) { + otx2_err("Chip specific setup failed"); + goto setup_fail; + } + + if (sdpvf->fn_list.setup_device_regs(sdpvf)) { + otx2_err("Failed to configure device registers"); + goto setup_fail; + } + + rawdev_queues = (uint32_t)(sdpvf->sriov_info.rings_per_vf); + + /* Rawdev queues setup for enqueue/dequeue */ + for (q = 0; q < rawdev_queues; q++) { + if (sdp_setup_iqs(sdpvf, q)) { + otx2_err("Failed to setup IQs"); + goto iq_fail; + } + } + otx2_info("Total[%d] IQs setup", sdpvf->num_iqs); + + for (q = 0; q < rawdev_queues; q++) { + if (sdp_setup_oqs(sdpvf, q)) { + otx2_err("Failed to setup OQs"); + goto oq_fail; + } + } + otx2_info("Total [%d] OQs setup", sdpvf->num_oqs); + + /* Enable IQ/OQ for this device */ + sdpvf->fn_list.enable_io_queues(sdpvf); + + /* Send OQ desc credits for OQs, credits are always + * sent after the OQs are enabled. + */ + for (q = 0; q < rawdev_queues; q++) { + rte_write32(sdpvf->droq[q]->nb_desc, + sdpvf->droq[q]->pkts_credit_reg); + + rte_io_mb(); + otx2_info("OQ[%d] dbells [%d]", q, + rte_read32(sdpvf->droq[q]->pkts_credit_reg)); + } + + rte_wmb(); + + otx2_info("SDP Device is Ready"); + + return 0; + +oq_fail: +iq_fail: +setup_fail: + return -ENOMEM; +} + +static int +sdp_rawdev_configure(const struct rte_rawdev *dev, rte_rawdev_obj_t config) +{ + struct sdp_rawdev_info *app_info = (struct sdp_rawdev_info *)config; + struct sdp_device *sdpvf; + + if (app_info == NULL) { + otx2_err("Application config info [NULL]"); + return -EINVAL; + } + + sdpvf = (struct sdp_device *)dev->dev_private; + + sdpvf->conf = app_info->app_conf; + sdpvf->enqdeq_mpool = app_info->enqdeq_mpool; + + sdp_vfdev_init(sdpvf); + + return 0; + +} + +/* SDP VF endpoint rawdev ops */ +static const struct rte_rawdev_ops sdp_rawdev_ops = { + .dev_configure = sdp_rawdev_configure, +}; + static int otx2_sdp_rawdev_probe(struct rte_pci_driver *pci_drv __rte_unused, struct rte_pci_device *pci_dev) @@ -66,6 +213,7 @@ return -ENOMEM; } + sdp_rawdev->dev_ops = &sdp_rawdev_ops; sdp_rawdev->device = &pci_dev->device; sdp_rawdev->driver_name = pci_dev->driver->driver.name; diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h index 7ae7a08..bb36b6a 100644 --- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h +++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h @@ -5,17 +5,449 @@ #ifndef _OTX2_EP_RAWDEV_H_ #define _OTX2_EP_RAWDEV_H_ -#define PCI_DEVID_OCTEONTX2_EP_VF 0xB203 /* OCTEON TX2 EP mode */ +#include +#include + + +/* Input Request Header format */ +struct sdp_instr_irh { + /* Request ID */ + uint64_t rid:16; + + /* PCIe port to use for response */ + uint64_t pcie_port:3; + + /* Scatter indicator 1=scatter */ + uint64_t scatter:1; + + /* Size of Expected result OR no. of entries in scatter list */ + uint64_t rlenssz:14; + + /* Desired destination port for result */ + uint64_t dport:6; + + /* Opcode Specific parameters */ + uint64_t param:8; + + /* Opcode for the return packet */ + uint64_t opcode:16; +}; + +/* SDP 32B instruction format */ +struct sdp_instr_32B { + /* Pointer where the input data is available. */ + uint64_t dptr; + + /* SDP Instruction Header. */ + uint64_t ih; + + /** Pointer where the response for a RAW mode packet + * will be written by OCTEON TX2. + */ + uint64_t rptr; + + /* Input Request Header. Additional info about the input. */ + uint64_t irh; +}; +#define SDP_32B_INSTR_SIZE (sizeof(sdp_instr_32B)) + +/* SDP 64B instruction format */ +struct sdp_instr_64B { + /* Pointer where the input data is available. */ + uint64_t dptr; + + /* SDP Instruction Header. */ + uint64_t ih; + + /** Pointer where the response for a RAW mode packet + * will be written by OCTEON TX2. + */ + uint64_t rptr; + + /* Input Request Header. */ + uint64_t irh; + + /* Additional headers available in a 64-byte instruction. */ + uint64_t exhdr[4]; +}; +#define SDP_64B_INSTR_SIZE (sizeof(sdp_instr_64B)) + +struct sdp_soft_instr { + /** Input data pointer. It is either pointing directly to input data + * or to a gather list. + */ + void *dptr; + + /** Response from OCTEON TX2 comes at this address. It is either + * directlty pointing to output data buffer or to a scatter list. + */ + void *rptr; + + /* The instruction header. All input commands have this field. */ + struct sdp_instr_ih ih; + + /* Input request header. */ + struct sdp_instr_irh irh; + + /** The PCI instruction to be sent to OCTEON TX2. This is stored in the + * instr to retrieve the physical address of buffers when instr is + * freed. + */ + struct sdp_instr_64B command; + + /** If a gather list was allocated, this ptr points to the buffer used + * for the gather list. The gather list has to be 8B aligned, so this + * value may be different from dptr. + */ + void *gather_ptr; + + /* Total data bytes transferred in the gather mode request. */ + uint64_t gather_bytes; + + /** If a scatter list was allocated, this ptr points to the buffer used + * for the scatter list. The scatter list has to be 8B aligned, so + * this value may be different from rptr. + */ + void *scatter_ptr; + + /* Total data bytes to be received in the scatter mode request. */ + uint64_t scatter_bytes; + + /* IQ number to which this instruction has to be submitted. */ + uint32_t q_no; + + /* IQ instruction request type. */ + uint32_t reqtype; +}; +#define SDP_SOFT_INSTR_SIZE (sizeof(sdp_soft_instr)) + +/* SDP IQ request list */ +struct sdp_instr_list { + void *buf; + uint32_t reqtype; +}; +#define SDP_IQREQ_LIST_SIZE (sizeof(struct sdp_instr_list)) + +/* Structure to define the configuration attributes for each Input queue. */ +struct sdp_iq_config { + /* Max number of IQs available */ + uint16_t max_iqs; + + /* Command size - 32 or 64 bytes */ + uint16_t instr_type; + + /* Pending list size, usually set to the sum of the size of all IQs */ + uint32_t pending_list_size; +}; + +/** The instruction (input) queue. + * The input queue is used to post raw (instruction) mode data or packet data + * to OCTEON TX2 device from the host. Each IQ of a SDP EP VF device has one + * such structure to represent it. + */ +struct sdp_instr_queue { + /* A spinlock to protect access to the input ring. */ + rte_spinlock_t lock; + rte_spinlock_t post_lock; + + struct sdp_device *sdp_dev; + rte_atomic64_t iq_flush_running; + + uint32_t q_no; + uint32_t pkt_in_done; + + /* Flag for 64 byte commands. */ + uint32_t iqcmd_64B:1; + uint32_t rsvd:17; + uint32_t status:8; + + /* Number of descriptors in this ring. */ + uint32_t nb_desc; + + /* Input ring index, where the driver should write the next packet */ + uint32_t host_write_index; + + /* Input ring index, where the OCTEON TX2 should read the next packet */ + uint32_t otx_read_index; + + /** This index aids in finding the window in the queue where OCTEON TX2 + * has read the commands. + */ + uint32_t flush_index; + + /* This keeps track of the instructions pending in this queue. */ + rte_atomic64_t instr_pending; + + uint32_t reset_instr_cnt; + + /* Pointer to the Virtual Base addr of the input ring. */ + uint8_t *base_addr; + + /* This IQ request list */ + struct sdp_instr_list *req_list; + + /* SDP doorbell register for the ring. */ + void *doorbell_reg; + + /* SDP instruction count register for this ring. */ + void *inst_cnt_reg; + + /* Number of instructions pending to be posted to OCTEON TX2. */ + uint32_t fill_cnt; + + /* DMA mapped base address of the input descriptor ring. */ + uint64_t base_addr_dma; + + /* Memory zone */ + const struct rte_memzone *iq_mz; +}; + +/* DROQ packet format for application i/f. */ +struct sdp_droq_pkt { + /* DROQ packet data buffer pointer. */ + uint8_t *data; + + /* DROQ packet data length */ + uint32_t len; + + uint32_t misc; +}; + +/** Descriptor format. + * The descriptor ring is made of descriptors which have 2 64-bit values: + * -# Physical (bus) address of the data buffer. + * -# Physical (bus) address of a sdp_droq_info structure. + * The device DMA's incoming packets and its information at the address + * given by these descriptor fields. + */ +struct sdp_droq_desc { + /* The buffer pointer */ + uint64_t buffer_ptr; + + /* The Info pointer */ + uint64_t info_ptr; +}; +#define SDP_DROQ_DESC_SIZE (sizeof(struct sdp_droq_desc)) + +/* Receive Header */ +union sdp_rh { + uint64_t rh64; +}; +#define SDP_RH_SIZE (sizeof(union sdp_rh)) + +/** Information about packet DMA'ed by OCTEON TX2. + * The format of the information available at Info Pointer after OCTEON TX2 + * has posted a packet. Not all descriptors have valid information. Only + * the Info field of the first descriptor for a packet has information + * about the packet. + */ +struct sdp_droq_info { + /* The Output Receive Header. */ + union sdp_rh rh; + + /* The Length of the packet. */ + uint64_t length; +}; +#define SDP_DROQ_INFO_SIZE (sizeof(struct sdp_droq_info)) + +/** Pointer to data buffer. + * Driver keeps a pointer to the data buffer that it made available to + * the OCTEON TX2 device. Since the descriptor ring keeps physical (bus) + * addresses, this field is required for the driver to keep track of + * the virtual address pointers. + */ +struct sdp_recv_buffer { + /* Packet buffer, including meta data. */ + void *buffer; + + /* Data in the packet buffer. */ + /* uint8_t *data; */ +}; +#define SDP_DROQ_RECVBUF_SIZE (sizeof(struct sdp_recv_buffer)) + +/* Structure to define the configuration attributes for each Output queue. */ +struct sdp_oq_config { + /* Max number of OQs available */ + uint16_t max_oqs; + + /* If set, the Output queue uses info-pointer mode. (Default: 1 ) */ + uint16_t info_ptr; + + /** The number of buffers that were consumed during packet processing by + * the driver on this Output queue before the driver attempts to + * replenish the descriptor ring with new buffers. + */ + uint32_t refill_threshold; +}; + +/* The Descriptor Ring Output Queue(DROQ) structure. */ +struct sdp_droq { + /* A spinlock to protect access to this ring. */ + rte_spinlock_t lock; + + struct sdp_device *sdp_dev; + /* The 8B aligned descriptor ring starts at this address. */ + struct sdp_droq_desc *desc_ring; + + uint32_t q_no; + uint32_t last_pkt_count; + + /* Driver should read the next packet at this index */ + uint32_t read_idx; + + /* OCTEON TX2 will write the next packet at this index */ + uint32_t write_idx; + + /* At this index, the driver will refill the descriptor's buffer */ + uint32_t refill_idx; + + /* Packets pending to be processed */ + rte_atomic64_t pkts_pending; + + /* Number of descriptors in this ring. */ + uint32_t nb_desc; + + /* The number of descriptors pending to refill. */ + uint32_t refill_count; + + uint32_t refill_threshold; + + /* The 8B aligned info ptrs begin from this address. */ + struct sdp_droq_info *info_list; + + /* receive buffer list contains virtual addresses of the buffers. */ + struct sdp_recv_buffer *recv_buf_list; + + /* The size of each buffer pointed by the buffer pointer. */ + uint32_t buffer_size; + + /** Pointer to the mapped packet credit register. + * Host writes number of info/buffer ptrs available to this register + */ + void *pkts_credit_reg; + + /** Pointer to the mapped packet sent register. OCTEON TX2 writes the + * number of packets DMA'ed to host memory in this register. + */ + void *pkts_sent_reg; + + /* DMA mapped address of the DROQ descriptor ring. */ + size_t desc_ring_dma; + + /* Info_ptr list is allocated at this virtual address. */ + size_t info_base_addr; + + /* DMA mapped address of the info list */ + size_t info_list_dma; + + /* Allocated size of info list. */ + uint32_t info_alloc_size; + + /* Memory zone **/ + const struct rte_memzone *desc_ring_mz; + const struct rte_memzone *info_mz; +}; +#define SDP_DROQ_SIZE (sizeof(struct sdp_droq)) + +/* IQ/OQ mask */ +struct sdp_io_enable { + uint64_t iq; + uint64_t oq; + uint64_t iq64B; +}; + +/* Structure to define the configuration. */ +struct sdp_config { + /* Input Queue attributes. */ + struct sdp_iq_config iq; + + /* Output Queue attributes. */ + struct sdp_oq_config oq; + + /* Num of desc for IQ rings */ + uint32_t num_iqdef_descs; + + /* Num of desc for OQ rings */ + uint32_t num_oqdef_descs; + + /* OQ buffer size */ + uint32_t oqdef_buf_size; +}; + +/* Required functions for each VF device */ +struct sdp_fn_list { + void (*setup_iq_regs)(struct sdp_device *sdpvf, uint32_t q_no); + void (*setup_oq_regs)(struct sdp_device *sdpvf, uint32_t q_no); + int (*setup_device_regs)(struct sdp_device *sdpvf); + void (*enable_io_queues)(struct sdp_device *sdpvf); + void (*enable_iq)(struct sdp_device *sdpvf, uint32_t q_no); + void (*enable_oq)(struct sdp_device *sdpvf, uint32_t q_no); +}; + +/* SRIOV information */ +struct sdp_sriov_info { + /* Number of rings assigned to VF */ + uint32_t rings_per_vf; + + /* Number of VF devices enabled */ + uint32_t num_vfs; +}; + + +/* Information to be passed from application */ +struct sdp_rawdev_info { + struct rte_mempool *enqdeq_mpool; + const struct sdp_config *app_conf; +}; /* SDP EP VF device */ struct sdp_device { /* PCI device pointer */ struct rte_pci_device *pci_dev; + uint16_t chip_id; + uint16_t pf_num; uint16_t vf_num; + /* This device's PCIe port used for traffic. */ + uint16_t pcie_port; + uint32_t pkind; + + /* The state of this device */ + rte_atomic64_t status; + /* Memory mapped h/w address */ uint8_t *hw_addr; + struct sdp_fn_list fn_list; + + /* Num IQs */ + uint32_t num_iqs; + + /* The input instruction queues */ + struct sdp_instr_queue *instr_queue[SDP_VF_MAX_IOQS_PER_RAWDEV]; + + /* Num OQs */ + uint32_t num_oqs; + + /* The DROQ output queues */ + struct sdp_droq *droq[SDP_VF_MAX_IOQS_PER_RAWDEV]; + + /* IOQ data buffer pool */ + struct rte_mempool *enqdeq_mpool; + + /* IOQ mask */ + struct sdp_io_enable io_qmask; + + /* SR-IOV info */ + struct sdp_sriov_info sriov_info; + + /* Device configuration */ + const struct sdp_config *conf; }; +const struct sdp_config *sdp_get_defconf(struct sdp_device *sdp_dev); +int sdp_setup_iqs(struct sdp_device *sdpvf, uint32_t iq_no); + +int sdp_setup_oqs(struct sdp_device *sdpvf, uint32_t oq_no); + #endif /* _OTX2_EP_RAWDEV_H_ */ diff --git a/drivers/raw/octeontx2_ep/otx2_ep_vf.c b/drivers/raw/octeontx2_ep/otx2_ep_vf.c new file mode 100644 index 0000000..b6120eb --- /dev/null +++ b/drivers/raw/octeontx2_ep/otx2_ep_vf.c @@ -0,0 +1,408 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(C) 2019 Marvell International Ltd. + */ + +#include +#include +#include + +#include "otx2_common.h" +#include "otx2_ep_rawdev.h" +#include "otx2_ep_vf.h" + +static int +sdp_vf_reset_iq(struct sdp_device *sdpvf, int q_no) +{ + uint64_t loop = SDP_VF_BUSY_LOOP_COUNT; + volatile uint64_t d64 = 0ull; + + /* There is no RST for a ring. + * Clear all registers one by one after disabling the ring + */ + + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_ENABLE(q_no)); + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_INSTR_BADDR(q_no)); + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_INSTR_RSIZE(q_no)); + + d64 = 0xFFFFFFFF; /* ~0ull */ + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_INSTR_DBELL(q_no)); + d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_INSTR_DBELL(q_no)); + + while ((d64 != 0) && loop--) { + otx2_write64(d64, sdpvf->hw_addr + + SDP_VF_R_IN_INSTR_DBELL(q_no)); + + rte_delay_ms(1); + + d64 = otx2_read64(sdpvf->hw_addr + + SDP_VF_R_IN_INSTR_DBELL(q_no)); + } + + loop = SDP_VF_BUSY_LOOP_COUNT; + d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CNTS(q_no)); + while ((d64 != 0) && loop--) { + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_CNTS(q_no)); + + rte_delay_ms(1); + + d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CNTS(q_no)); + } + + d64 = 0ull; + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_INT_LEVELS(q_no)); + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_PKT_CNT(q_no)); + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_BYTE_CNT(q_no)); + + return 0; +} + +static int +sdp_vf_reset_oq(struct sdp_device *sdpvf, int q_no) +{ + uint64_t loop = SDP_VF_BUSY_LOOP_COUNT; + volatile uint64_t d64 = 0ull; + + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_ENABLE(q_no)); + + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_SLIST_BADDR(q_no)); + + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_SLIST_RSIZE(q_no)); + + d64 = 0xFFFFFFFF; + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_SLIST_DBELL(q_no)); + d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_SLIST_DBELL(q_no)); + + while ((d64 != 0) && loop--) { + otx2_write64(d64, sdpvf->hw_addr + + SDP_VF_R_OUT_SLIST_DBELL(q_no)); + + rte_delay_ms(1); + + d64 = otx2_read64(sdpvf->hw_addr + + SDP_VF_R_OUT_SLIST_DBELL(q_no)); + } + + loop = SDP_VF_BUSY_LOOP_COUNT; + d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CNTS(q_no)); + while ((d64 != 0) && (loop--)) { + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_CNTS(q_no)); + + rte_delay_ms(1); + + d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CNTS(q_no)); + } + + d64 = 0ull; + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_INT_LEVELS(q_no)); + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_PKT_CNT(q_no)); + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_BYTE_CNT(q_no)); + + return 0; +} + +static void +sdp_vf_setup_global_iq_reg(struct sdp_device *sdpvf, int q_no) +{ + volatile uint64_t reg_val = 0ull; + + /* Select ES, RO, NS, RDSIZE,DPTR Fomat#0 for IQs + * IS_64B is by default enabled. + */ + reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CONTROL(q_no)); + + reg_val |= SDP_VF_R_IN_CTL_RDSIZE; + reg_val |= SDP_VF_R_IN_CTL_IS_64B; + reg_val |= SDP_VF_R_IN_CTL_ESR; + + otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_IN_CONTROL(q_no)); + +} + +static void +sdp_vf_setup_global_oq_reg(struct sdp_device *sdpvf, int q_no) +{ + volatile uint64_t reg_val = 0ull; + + reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CONTROL(q_no)); + + reg_val |= (SDP_VF_R_OUT_CTL_IMODE); + + reg_val &= ~(SDP_VF_R_OUT_CTL_ROR_P); + reg_val &= ~(SDP_VF_R_OUT_CTL_NSR_P); + reg_val &= ~(SDP_VF_R_OUT_CTL_ROR_I); + reg_val &= ~(SDP_VF_R_OUT_CTL_NSR_I); + reg_val &= ~(SDP_VF_R_OUT_CTL_ES_I); + reg_val &= ~(SDP_VF_R_OUT_CTL_ROR_D); + reg_val &= ~(SDP_VF_R_OUT_CTL_NSR_D); + reg_val &= ~(SDP_VF_R_OUT_CTL_ES_D); + + /* INFO/DATA ptr swap is required */ + reg_val |= (SDP_VF_R_OUT_CTL_ES_P); + + otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_OUT_CONTROL(q_no)); + +} + +static int +sdp_vf_reset_input_queues(struct sdp_device *sdpvf) +{ + uint32_t q_no = 0; + + otx2_sdp_dbg("%s :", __func__); + + for (q_no = 0; q_no < sdpvf->sriov_info.rings_per_vf; q_no++) + sdp_vf_reset_iq(sdpvf, q_no); + + return 0; +} + +static int +sdp_vf_reset_output_queues(struct sdp_device *sdpvf) +{ + uint64_t q_no = 0ull; + + otx2_sdp_dbg(" %s :", __func__); + + for (q_no = 0; q_no < sdpvf->sriov_info.rings_per_vf; q_no++) + sdp_vf_reset_oq(sdpvf, q_no); + + return 0; +} + +static void +sdp_vf_setup_global_input_regs(struct sdp_device *sdpvf) +{ + uint64_t q_no = 0ull; + + sdp_vf_reset_input_queues(sdpvf); + + for (q_no = 0; q_no < (sdpvf->sriov_info.rings_per_vf); q_no++) + sdp_vf_setup_global_iq_reg(sdpvf, q_no); +} + +static void +sdp_vf_setup_global_output_regs(struct sdp_device *sdpvf) +{ + uint32_t q_no; + + sdp_vf_reset_output_queues(sdpvf); + + for (q_no = 0; q_no < (sdpvf->sriov_info.rings_per_vf); q_no++) + sdp_vf_setup_global_oq_reg(sdpvf, q_no); + +} + +static int +sdp_vf_setup_device_regs(struct sdp_device *sdpvf) +{ + sdp_vf_setup_global_input_regs(sdpvf); + sdp_vf_setup_global_output_regs(sdpvf); + + return 0; +} + +static void +sdp_vf_setup_iq_regs(struct sdp_device *sdpvf, uint32_t iq_no) +{ + struct sdp_instr_queue *iq = sdpvf->instr_queue[iq_no]; + volatile uint64_t reg_val = 0ull; + + reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CONTROL(iq_no)); + + /* Wait till IDLE to set to 1, not supposed to configure BADDR + * as long as IDLE is 0 + */ + if (!(reg_val & SDP_VF_R_IN_CTL_IDLE)) { + do { + reg_val = otx2_read64(sdpvf->hw_addr + + SDP_VF_R_IN_CONTROL(iq_no)); + } while (!(reg_val & SDP_VF_R_IN_CTL_IDLE)); + } + + /* Write the start of the input queue's ring and its size */ + otx2_write64(iq->base_addr_dma, sdpvf->hw_addr + + SDP_VF_R_IN_INSTR_BADDR(iq_no)); + otx2_write64(iq->nb_desc, sdpvf->hw_addr + + SDP_VF_R_IN_INSTR_RSIZE(iq_no)); + + /* Remember the doorbell & instruction count register addr + * for this queue + */ + iq->doorbell_reg = (uint8_t *) sdpvf->hw_addr + + SDP_VF_R_IN_INSTR_DBELL(iq_no); + iq->inst_cnt_reg = (uint8_t *) sdpvf->hw_addr + + SDP_VF_R_IN_CNTS(iq_no); + + otx2_sdp_dbg("InstQ[%d]:dbell reg @ 0x%p instcnt_reg @ 0x%p", + iq_no, iq->doorbell_reg, iq->inst_cnt_reg); + + /* Store the current instrn counter(used in flush_iq calculation) */ + iq->reset_instr_cnt = rte_read32(iq->inst_cnt_reg); + + /* IN INTR_THRESHOLD is set to max(FFFFFFFF) which disable the IN INTR + * to raise + */ + reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_INT_LEVELS(iq_no)); + reg_val = 0xffffffff; + + otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_IN_INT_LEVELS(iq_no)); + +} + +static void +sdp_vf_setup_oq_regs(struct sdp_device *sdpvf, uint32_t oq_no) +{ + volatile uint64_t reg_val = 0ull; + uint64_t oq_ctl = 0ull; + + struct sdp_droq *droq = sdpvf->droq[oq_no]; + + /* Wait on IDLE to set to 1, supposed to configure BADDR + * as log as IDLE is 0 + */ + reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CONTROL(oq_no)); + + while (!(reg_val & SDP_VF_R_OUT_CTL_IDLE)) { + reg_val = otx2_read64(sdpvf->hw_addr + + SDP_VF_R_OUT_CONTROL(oq_no)); + } + + otx2_write64(droq->desc_ring_dma, sdpvf->hw_addr + + SDP_VF_R_OUT_SLIST_BADDR(oq_no)); + otx2_write64(droq->nb_desc, sdpvf->hw_addr + + SDP_VF_R_OUT_SLIST_RSIZE(oq_no)); + + oq_ctl = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CONTROL(oq_no)); + + /* Clear the ISIZE and BSIZE (22-0) */ + oq_ctl &= ~(0x7fffffull); + + /* Populate the BSIZE (15-0) */ + oq_ctl |= (droq->buffer_size & 0xffff); + + /* Populate ISIZE(22-16) */ + oq_ctl |= ((SDP_RH_SIZE << 16) & 0x7fffff); + otx2_write64(oq_ctl, sdpvf->hw_addr + SDP_VF_R_OUT_CONTROL(oq_no)); + + /* Mapped address of the pkt_sent and pkts_credit regs */ + droq->pkts_sent_reg = (uint8_t *) sdpvf->hw_addr + + SDP_VF_R_OUT_CNTS(oq_no); + droq->pkts_credit_reg = (uint8_t *) sdpvf->hw_addr + + SDP_VF_R_OUT_SLIST_DBELL(oq_no); + + reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_INT_LEVELS(oq_no)); + + /* Clear PKT_CNT register */ + rte_write64(0xFFFFFFFFF, (uint8_t *)sdpvf->hw_addr + + SDP_VF_R_OUT_PKT_CNT(oq_no)); + + /* Clear the OQ doorbell */ + rte_write32(0xFFFFFFFF, droq->pkts_credit_reg); + while ((rte_read32(droq->pkts_credit_reg) != 0ull)) { + rte_write32(0xFFFFFFFF, droq->pkts_credit_reg); + rte_delay_ms(1); + } + otx2_sdp_dbg("SDP_R[%d]_credit:%x", oq_no, + rte_read32(droq->pkts_credit_reg)); + + /* Clear the OQ_OUT_CNTS doorbell */ + reg_val = rte_read32(droq->pkts_sent_reg); + rte_write32((uint32_t)reg_val, droq->pkts_sent_reg); + + otx2_sdp_dbg("SDP_R[%d]_sent: %x", oq_no, + rte_read32(droq->pkts_sent_reg)); + + while (((rte_read32(droq->pkts_sent_reg)) != 0ull)) { + reg_val = rte_read32(droq->pkts_sent_reg); + rte_write32((uint32_t)reg_val, droq->pkts_sent_reg); + rte_delay_ms(1); + } + +} + +static void +sdp_vf_enable_iq(struct sdp_device *sdpvf, uint32_t q_no) +{ + volatile uint64_t reg_val = 0ull; + uint64_t loop = SDP_VF_BUSY_LOOP_COUNT; + + /* Resetting doorbells during IQ enabling also to handle abrupt + * guest reboot. IQ reset does not clear the doorbells. + */ + otx2_write64(0xFFFFFFFF, sdpvf->hw_addr + + SDP_VF_R_IN_INSTR_DBELL(q_no)); + + while (((otx2_read64(sdpvf->hw_addr + + SDP_VF_R_IN_INSTR_DBELL(q_no))) != 0ull) && loop--) { + + rte_delay_ms(1); + } + + reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_ENABLE(q_no)); + reg_val |= 0x1ull; + + otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_IN_ENABLE(q_no)); + + otx2_info("IQ[%d] enable done", q_no); + +} + +static void +sdp_vf_enable_oq(struct sdp_device *sdpvf, uint32_t q_no) +{ + volatile uint64_t reg_val = 0ull; + + reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_ENABLE(q_no)); + reg_val |= 0x1ull; + otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_OUT_ENABLE(q_no)); + + otx2_info("OQ[%d] enable done", q_no); +} + +static void +sdp_vf_enable_io_queues(struct sdp_device *sdpvf) +{ + uint32_t q_no = 0; + + for (q_no = 0; q_no < sdpvf->num_iqs; q_no++) + sdp_vf_enable_iq(sdpvf, q_no); + + for (q_no = 0; q_no < sdpvf->num_oqs; q_no++) + sdp_vf_enable_oq(sdpvf, q_no); +} + +int +sdp_vf_setup_device(struct sdp_device *sdpvf) +{ + uint64_t reg_val = 0ull; + + /* If application doesn't provide its conf, use driver default conf */ + if (sdpvf->conf == NULL) { + sdpvf->conf = sdp_get_defconf(sdpvf); + if (sdpvf->conf == NULL) { + otx2_err("SDP VF default config not found"); + return -ENOMEM; + } + otx2_info("Default config is used"); + } + + /* Get IOQs (RPVF] count */ + reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CONTROL(0)); + + sdpvf->sriov_info.rings_per_vf = ((reg_val >> SDP_VF_R_IN_CTL_RPVF_POS) + & SDP_VF_R_IN_CTL_RPVF_MASK); + + otx2_info("SDP RPVF: %d", sdpvf->sriov_info.rings_per_vf); + + sdpvf->fn_list.setup_iq_regs = sdp_vf_setup_iq_regs; + sdpvf->fn_list.setup_oq_regs = sdp_vf_setup_oq_regs; + sdpvf->fn_list.setup_device_regs = sdp_vf_setup_device_regs; + sdpvf->fn_list.enable_io_queues = sdp_vf_enable_io_queues; + sdpvf->fn_list.enable_iq = sdp_vf_enable_iq; + sdpvf->fn_list.enable_oq = sdp_vf_enable_oq; + + + return 0; + +} + diff --git a/drivers/raw/octeontx2_ep/otx2_ep_vf.h b/drivers/raw/octeontx2_ep/otx2_ep_vf.h new file mode 100644 index 0000000..974f856 --- /dev/null +++ b/drivers/raw/octeontx2_ep/otx2_ep_vf.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(C) 2019 Marvell International Ltd. + */ +#ifndef _OTX2_EP_VF_H_ +#define _OTX2_EP_VF_H_ +int +sdp_vf_setup_device(struct sdp_device *sdpvf); + +#endif /*_OTX2_EP_VF_H_ */ + -- 1.8.3.1