* [dpdk-dev] [PATCH v5 1/6] raw/octeontx2_ep: add build infra and device probe
2020-01-13 6:00 [dpdk-dev] [PATCH v5 0/6] OCTEON TX2 End Point Driver Mahipal Challa
@ 2020-01-13 6:00 ` Mahipal Challa
2020-01-13 6:00 ` [dpdk-dev] [PATCH v5 2/6] raw/octeontx2_ep: add device configuration Mahipal Challa
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Mahipal Challa @ 2020-01-13 6:00 UTC (permalink / raw)
To: dev, thomas; +Cc: Gavin.Hu, jerinj, pathreya, snilla, venkatn
Add the OCTEON TX2 SDP EP device probe along with the
build infrastructure for Make and meson builds.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
---
MAINTAINERS | 5 +
config/common_base | 5 +
doc/guides/rawdevs/index.rst | 1 +
doc/guides/rawdevs/octeontx2_ep.rst | 41 +++++++
doc/guides/rel_notes/release_20_02.rst | 4 +
drivers/raw/Makefile | 1 +
drivers/raw/meson.build | 1 +
drivers/raw/octeontx2_ep/Makefile | 40 +++++++
drivers/raw/octeontx2_ep/meson.build | 6 +
drivers/raw/octeontx2_ep/otx2_ep_rawdev.c | 132 +++++++++++++++++++++
drivers/raw/octeontx2_ep/otx2_ep_rawdev.h | 21 ++++
.../rte_rawdev_octeontx2_ep_version.map | 4 +
mk/rte.app.mk | 2 +
13 files changed, 263 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 4395d8d..24f1240 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1173,6 +1173,11 @@ M: Vamsi Attunuru <vattunuru@marvell.com>
F: drivers/raw/octeontx2_dma/
F: doc/guides/rawdevs/octeontx2_dma.rst
+Marvell OCTEON TX2 EP
+M: Mahipal Challa <mchalla@marvell.com>
+F: drivers/raw/octeontx2_ep/
+F: doc/guides/rawdevs/octeontx2_ep.rst
+
NTB
M: Xiaoyun Li <xiaoyun.li@intel.com>
M: Jingjing Wu <jingjing.wu@intel.com>
diff --git a/config/common_base b/config/common_base
index 7dec7ed..8e7dad2 100644
--- a/config/common_base
+++ b/config/common_base
@@ -796,6 +796,11 @@ CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
+# Compile PMD for octeontx2 EP raw device
+#
+CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV=y
+
+#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
diff --git a/doc/guides/rawdevs/index.rst b/doc/guides/rawdevs/index.rst
index 22bc013..f64ec44 100644
--- a/doc/guides/rawdevs/index.rst
+++ b/doc/guides/rawdevs/index.rst
@@ -17,3 +17,4 @@ application through rawdev API.
ioat
ntb
octeontx2_dma
+ octeontx2_ep
diff --git a/doc/guides/rawdevs/octeontx2_ep.rst b/doc/guides/rawdevs/octeontx2_ep.rst
new file mode 100644
index 0000000..5f5ed01
--- /dev/null
+++ b/doc/guides/rawdevs/octeontx2_ep.rst
@@ -0,0 +1,41 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2019 Marvell International Ltd.
+
+Marvell OCTEON TX2 End Point Rawdev Driver
+==========================================
+
+OCTEON TX2 has an internal SDP unit which provides End Point mode of operation
+by exposing its IOQs to Host, IOQs are used for packet I/O between Host and
+OCTEON TX2. Each OCTEON TX2 SDP PF supports a max of 128 VFs and Each VF is
+associated with a set of IOQ pairs.
+
+Features
+--------
+
+This OCTEON TX2 End Point mode PMD supports
+
+#. Packet Input - Host to OCTEON TX2 with direct data instruction mode.
+
+#. Packet Output - OCTEON TX2 to Host with info pointer mode.
+
+Config File Options
+~~~~~~~~~~~~~~~~~~~
+
+The following options can be modified in the ``config`` file.
+
+- ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV`` (default ``y``)
+
+ Toggle compilation of the ``lrte_pmd_octeontx2_ep`` driver.
+
+Initialization
+--------------
+
+The number of SDP VFs enabled, can be controlled by setting sysfs
+entry `sriov_numvfs` for the corresponding PF driver.
+
+.. code-block:: console
+
+ echo <num_vfs> > /sys/bus/pci/drivers/octeontx2-ep/0000\:04\:00.0/sriov_numvfs
+
+Once the required VFs are enabled, to be accessible from DPDK, VFs need to be
+bound to vfio-pci driver.
diff --git a/doc/guides/rel_notes/release_20_02.rst b/doc/guides/rel_notes/release_20_02.rst
index 0eaa45a..ec9be83 100644
--- a/doc/guides/rel_notes/release_20_02.rst
+++ b/doc/guides/rel_notes/release_20_02.rst
@@ -56,6 +56,10 @@ New Features
Also, make sure to start the actual text at the margin.
=========================================================
+* **Added Marvell OCTEON TX2 End Point rawdev PMD.**
+
+ Added a new OCTEON TX2 rawdev PMD for End Point mode of operation.
+ See the :doc:`../rawdevs/octeontx2_ep` for more details on this new PMD.
Removed Items
-------------
diff --git a/drivers/raw/Makefile b/drivers/raw/Makefile
index 0b6d13d..80b043e 100644
--- a/drivers/raw/Makefile
+++ b/drivers/raw/Makefile
@@ -13,5 +13,6 @@ DIRS-$(CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV) += ifpga
DIRS-$(CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV) += ioat
DIRS-$(CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV) += ntb
DIRS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV) += octeontx2_dma
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += octeontx2_ep
include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/drivers/raw/meson.build b/drivers/raw/meson.build
index d7037cd..bb57977 100644
--- a/drivers/raw/meson.build
+++ b/drivers/raw/meson.build
@@ -4,6 +4,7 @@
drivers = ['dpaa2_cmdif', 'dpaa2_qdma',
'ifpga', 'ioat', 'ntb',
'octeontx2_dma',
+ 'octeontx2_ep',
'skeleton']
std_deps = ['rawdev']
config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV'
diff --git a/drivers/raw/octeontx2_ep/Makefile b/drivers/raw/octeontx2_ep/Makefile
new file mode 100644
index 0000000..8cec6bd
--- /dev/null
+++ b/drivers/raw/octeontx2_ep/Makefile
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(C) 2019 Marvell International Ltd.
+#
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# Library name
+LIB = librte_rawdev_octeontx2_ep.a
+
+# Build flags
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+CFLAGS += -I$(RTE_SDK)/drivers/common/octeontx2/
+CFLAGS += -I$(RTE_SDK)/drivers/raw/octeontx2_ep/
+
+LDLIBS += -lrte_eal
+LDLIBS += -lrte_rawdev
+LDLIBS += -lrte_bus_pci
+LDLIBS += -lrte_mempool
+LDLIBS += -lrte_common_octeontx2
+
+ifneq ($(CONFIG_RTE_ARCH_64),y)
+CFLAGS += -Wno-int-to-pointer-cast
+CFLAGS += -Wno-pointer-to-int-cast
+ifeq ($(CONFIG_RTE_TOOLCHAIN_ICC),y)
+CFLAGS += -diag-disable 2259
+endif
+endif
+
+EXPORT_MAP := rte_rawdev_octeontx2_ep_version.map
+
+LIBABIVER := 1
+
+#
+# All source are stored in SRCS-y
+#
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_rawdev.c
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/raw/octeontx2_ep/meson.build b/drivers/raw/octeontx2_ep/meson.build
new file mode 100644
index 0000000..e513131
--- /dev/null
+++ b/drivers/raw/octeontx2_ep/meson.build
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(C) 2019 Marvell International Ltd.
+#
+
+deps += ['bus_pci', 'common_octeontx2', 'rawdev']
+sources = files('otx2_ep_rawdev.c')
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
new file mode 100644
index 0000000..04b4fac
--- /dev/null
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
@@ -0,0 +1,132 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+#include <string.h>
+#include <unistd.h>
+
+#include <rte_bus.h>
+#include <rte_bus_pci.h>
+#include <rte_eal.h>
+#include <rte_lcore.h>
+#include <rte_mempool.h>
+#include <rte_pci.h>
+
+#include <rte_common.h>
+#include <rte_rawdev.h>
+#include <rte_rawdev_pmd.h>
+
+#include "otx2_common.h"
+#include "otx2_ep_rawdev.h"
+
+static const struct rte_pci_id pci_sdp_vf_map[] = {
+ {
+ RTE_PCI_DEVICE(PCI_VENDOR_ID_CAVIUM,
+ PCI_DEVID_OCTEONTX2_EP_VF)
+ },
+ {
+ .vendor_id = 0,
+ },
+};
+
+static int
+otx2_sdp_rawdev_probe(struct rte_pci_driver *pci_drv __rte_unused,
+ struct rte_pci_device *pci_dev)
+{
+ char name[RTE_RAWDEV_NAME_MAX_LEN];
+ struct sdp_device *sdpvf = NULL;
+ struct rte_rawdev *sdp_rawdev;
+ uint16_t vf_id;
+
+ /* Single process support */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+
+ if (pci_dev->mem_resource[0].addr)
+ otx2_info("SDP_EP BAR0 is mapped:");
+ else {
+ otx2_err("SDP_EP: Failed to map device BARs");
+ otx2_err("BAR0 %p\n BAR2 %p",
+ pci_dev->mem_resource[0].addr,
+ pci_dev->mem_resource[2].addr);
+ return -ENODEV;
+ }
+
+ memset(name, 0, sizeof(name));
+ snprintf(name, RTE_RAWDEV_NAME_MAX_LEN, "SDPEP:%x:%02x.%x",
+ pci_dev->addr.bus, pci_dev->addr.devid,
+ pci_dev->addr.function);
+
+ /* Allocate rawdev pmd */
+ sdp_rawdev = rte_rawdev_pmd_allocate(name,
+ sizeof(struct sdp_device),
+ rte_socket_id());
+
+ if (sdp_rawdev == NULL) {
+ otx2_err("SDP_EP VF rawdev allocation failed");
+ return -ENOMEM;
+ }
+
+ sdp_rawdev->device = &pci_dev->device;
+ sdp_rawdev->driver_name = pci_dev->driver->driver.name;
+
+ sdpvf = (struct sdp_device *)sdp_rawdev->dev_private;
+ sdpvf->hw_addr = pci_dev->mem_resource[0].addr;
+ sdpvf->pci_dev = pci_dev;
+
+ /* Discover the VF number being probed */
+ vf_id = ((pci_dev->addr.devid & 0x1F) << 3) |
+ (pci_dev->addr.function & 0x7);
+
+ vf_id -= 1;
+ sdpvf->vf_num = vf_id;
+
+ otx2_info("SDP_EP VF[%d] probe done", vf_id);
+
+ return 0;
+}
+
+static int
+otx2_sdp_rawdev_remove(struct rte_pci_device *pci_dev)
+{
+ char name[RTE_RAWDEV_NAME_MAX_LEN];
+ struct rte_rawdev *rawdev;
+ struct sdp_device *sdpvf;
+
+ /* Single process support */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+
+ if (pci_dev == NULL) {
+ otx2_err("SDP_EP:invalid pci_dev!");
+ return -EINVAL;
+ }
+
+
+ memset(name, 0, sizeof(name));
+ snprintf(name, RTE_RAWDEV_NAME_MAX_LEN, "SDPEP:%x:%02x.%x",
+ pci_dev->addr.bus, pci_dev->addr.devid,
+ pci_dev->addr.function);
+
+ rawdev = rte_rawdev_pmd_get_named_dev(name);
+ if (rawdev == NULL) {
+ otx2_err("SDP_EP: invalid device name (%s)", name);
+ return -EINVAL;
+ }
+
+ sdpvf = (struct sdp_device *)rawdev->dev_private;
+ otx2_info("Removing SDP_EP VF[%d] ", sdpvf->vf_num);
+
+ /* rte_rawdev_close is called by pmd_release */
+ return rte_rawdev_pmd_release(rawdev);
+}
+
+static struct rte_pci_driver rte_sdp_rawdev_pmd = {
+ .id_table = pci_sdp_vf_map,
+ .drv_flags = (RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_NEED_IOVA_AS_VA),
+ .probe = otx2_sdp_rawdev_probe,
+ .remove = otx2_sdp_rawdev_remove,
+};
+
+RTE_PMD_REGISTER_PCI(sdp_rawdev_pci_driver, rte_sdp_rawdev_pmd);
+RTE_PMD_REGISTER_PCI_TABLE(sdp_rawdev_pci_driver, pci_sdp_vf_map);
+RTE_PMD_REGISTER_KMOD_DEP(sdp_rawdev_pci_driver, "vfio-pci");
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
new file mode 100644
index 0000000..7ae7a08
--- /dev/null
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#ifndef _OTX2_EP_RAWDEV_H_
+#define _OTX2_EP_RAWDEV_H_
+
+#define PCI_DEVID_OCTEONTX2_EP_VF 0xB203 /* OCTEON TX2 EP mode */
+
+/* SDP EP VF device */
+struct sdp_device {
+ /* PCI device pointer */
+ struct rte_pci_device *pci_dev;
+ uint16_t vf_num;
+
+ /* Memory mapped h/w address */
+ uint8_t *hw_addr;
+
+};
+
+#endif /* _OTX2_EP_RAWDEV_H_ */
diff --git a/drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map b/drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map
new file mode 100644
index 0000000..ff357af
--- /dev/null
+++ b/drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map
@@ -0,0 +1,4 @@
+DPDK_20.02 {
+
+ local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 05ea034..24353e9 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -116,6 +116,7 @@ OCTEONTX2-y := $(CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL)
OCTEONTX2-y += $(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO)
OCTEONTX2-y += $(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV)
OCTEONTX2-y += $(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV)
+OCTEONTX2-y += $(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV)
OCTEONTX2-y += $(CONFIG_RTE_LIBRTE_OCTEONTX2_PMD)
ifeq ($(findstring y,$(OCTEONTX2-y)),y)
_LDLIBS-y += -lrte_common_octeontx2
@@ -336,6 +337,7 @@ endif # CONFIG_RTE_LIBRTE_IFPGA_BUS
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV) += -lrte_rawdev_ioat
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV) += -lrte_rawdev_ntb
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV) += -lrte_rawdev_octeontx2_dma
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += -lrte_rawdev_octeontx2_ep
endif # CONFIG_RTE_LIBRTE_RAWDEV
endif # !CONFIG_RTE_BUILD_SHARED_LIBS
--
1.8.3.1
^ permalink raw reply [flat|nested] 9+ messages in thread* [dpdk-dev] [PATCH v5 2/6] raw/octeontx2_ep: add device configuration
2020-01-13 6:00 [dpdk-dev] [PATCH v5 0/6] OCTEON TX2 End Point Driver Mahipal Challa
2020-01-13 6:00 ` [dpdk-dev] [PATCH v5 1/6] raw/octeontx2_ep: add build infra and device probe Mahipal Challa
@ 2020-01-13 6:00 ` Mahipal Challa
2020-01-13 6:00 ` [dpdk-dev] [PATCH v5 3/6] raw/octeontx2_ep: add device uninitialization Mahipal Challa
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Mahipal Challa @ 2020-01-13 6:00 UTC (permalink / raw)
To: dev, thomas; +Cc: Gavin.Hu, jerinj, pathreya, snilla, venkatn
Register "dev_configure" API to configure/initialize the SDP
VF PCIe devices.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
---
doc/guides/rawdevs/octeontx2_ep.rst | 29 ++
drivers/common/octeontx2/hw/otx2_sdp.h | 184 +++++++++
drivers/common/octeontx2/otx2_common.c | 9 +
drivers/common/octeontx2/otx2_common.h | 4 +
.../octeontx2/rte_common_octeontx2_version.map | 6 +
drivers/raw/octeontx2_ep/Makefile | 3 +
drivers/raw/octeontx2_ep/meson.build | 4 +-
drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c | 294 ++++++++++++++
drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h | 11 +
drivers/raw/octeontx2_ep/otx2_ep_rawdev.c | 148 +++++++
drivers/raw/octeontx2_ep/otx2_ep_rawdev.h | 434 ++++++++++++++++++++-
drivers/raw/octeontx2_ep/otx2_ep_vf.c | 408 +++++++++++++++++++
drivers/raw/octeontx2_ep/otx2_ep_vf.h | 10 +
13 files changed, 1542 insertions(+), 2 deletions(-)
diff --git a/doc/guides/rawdevs/octeontx2_ep.rst b/doc/guides/rawdevs/octeontx2_ep.rst
index 5f5ed01..2507fcf 100644
--- a/doc/guides/rawdevs/octeontx2_ep.rst
+++ b/doc/guides/rawdevs/octeontx2_ep.rst
@@ -39,3 +39,32 @@ entry `sriov_numvfs` for the corresponding PF driver.
Once the required VFs are enabled, to be accessible from DPDK, VFs need to be
bound to vfio-pci driver.
+
+Device Setup
+------------
+
+The OCTEON TX2 SDP End Point VF devices will need to be bound to a
+user-space IO driver for use. The script ``dpdk-devbind.py`` script
+included with DPDK can be used to view the state of the devices and to bind
+them to a suitable DPDK-supported kernel driver. When querying the status
+of the devices, they will appear under the category of "Misc (rawdev)
+devices", i.e. the command ``dpdk-devbind.py --status-dev misc`` can be
+used to see the state of those devices alone.
+
+Device Configuration
+--------------------
+
+Configuring SDP EP rawdev device is done using the ``rte_rawdev_configure()``
+API, which takes the mempool as parameter. PMD uses this pool to send/receive
+packets to/from the HW.
+
+The following code shows how the device is configured
+
+.. code-block:: c
+
+ struct sdp_rawdev_info config = {0};
+ struct rte_rawdev_info rdev_info = {.dev_private = &config};
+ config.enqdeq_mpool = (void *)rte_mempool_create(...);
+
+ rte_rawdev_configure(dev_id, (rte_rawdev_obj_t)&rdev_info);
+
diff --git a/drivers/common/octeontx2/hw/otx2_sdp.h b/drivers/common/octeontx2/hw/otx2_sdp.h
new file mode 100644
index 0000000..1e690f8
--- /dev/null
+++ b/drivers/common/octeontx2/hw/otx2_sdp.h
@@ -0,0 +1,184 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#ifndef __OTX2_SDP_HW_H_
+#define __OTX2_SDP_HW_H_
+
+/* SDP VF IOQs */
+#define SDP_MIN_RINGS_PER_VF (1)
+#define SDP_MAX_RINGS_PER_VF (8)
+
+/* SDP VF IQ configuration */
+#define SDP_VF_MAX_IQ_DESCRIPTORS (512)
+#define SDP_VF_MIN_IQ_DESCRIPTORS (128)
+
+#define SDP_VF_DB_MIN (1)
+#define SDP_VF_DB_TIMEOUT (1)
+#define SDP_VF_INTR_THRESHOLD (0xFFFFFFFF)
+
+#define SDP_VF_64BYTE_INSTR (64)
+#define SDP_VF_32BYTE_INSTR (32)
+
+/* SDP VF OQ configuration */
+#define SDP_VF_MAX_OQ_DESCRIPTORS (512)
+#define SDP_VF_MIN_OQ_DESCRIPTORS (128)
+#define SDP_VF_OQ_BUF_SIZE (2048)
+#define SDP_VF_OQ_REFIL_THRESHOLD (16)
+
+#define SDP_VF_OQ_INFOPTR_MODE (1)
+#define SDP_VF_OQ_BUFPTR_MODE (0)
+
+#define SDP_VF_OQ_INTR_PKT (1)
+#define SDP_VF_OQ_INTR_TIME (10)
+#define SDP_VF_CFG_IO_QUEUES SDP_MAX_RINGS_PER_VF
+
+/* Wait time in milliseconds for FLR */
+#define SDP_VF_PCI_FLR_WAIT (100)
+#define SDP_VF_BUSY_LOOP_COUNT (10000)
+
+#define SDP_VF_MAX_IO_QUEUES SDP_MAX_RINGS_PER_VF
+#define SDP_VF_MIN_IO_QUEUES SDP_MIN_RINGS_PER_VF
+
+/* SDP VF IOQs per rawdev */
+#define SDP_VF_MAX_IOQS_PER_RAWDEV SDP_VF_MAX_IO_QUEUES
+#define SDP_VF_DEFAULT_IOQS_PER_RAWDEV SDP_VF_MIN_IO_QUEUES
+
+/* SDP VF Register definitions */
+#define SDP_VF_RING_OFFSET (0x1ull << 17)
+
+/* SDP VF IQ Registers */
+#define SDP_VF_R_IN_CONTROL_START (0x10000)
+#define SDP_VF_R_IN_ENABLE_START (0x10010)
+#define SDP_VF_R_IN_INSTR_BADDR_START (0x10020)
+#define SDP_VF_R_IN_INSTR_RSIZE_START (0x10030)
+#define SDP_VF_R_IN_INSTR_DBELL_START (0x10040)
+#define SDP_VF_R_IN_CNTS_START (0x10050)
+#define SDP_VF_R_IN_INT_LEVELS_START (0x10060)
+#define SDP_VF_R_IN_PKT_CNT_START (0x10080)
+#define SDP_VF_R_IN_BYTE_CNT_START (0x10090)
+
+#define SDP_VF_R_IN_CONTROL(ring) \
+ (SDP_VF_R_IN_CONTROL_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_ENABLE(ring) \
+ (SDP_VF_R_IN_ENABLE_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_INSTR_BADDR(ring) \
+ (SDP_VF_R_IN_INSTR_BADDR_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_INSTR_RSIZE(ring) \
+ (SDP_VF_R_IN_INSTR_RSIZE_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_INSTR_DBELL(ring) \
+ (SDP_VF_R_IN_INSTR_DBELL_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_CNTS(ring) \
+ (SDP_VF_R_IN_CNTS_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_INT_LEVELS(ring) \
+ (SDP_VF_R_IN_INT_LEVELS_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_PKT_CNT(ring) \
+ (SDP_VF_R_IN_PKT_CNT_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_BYTE_CNT(ring) \
+ (SDP_VF_R_IN_BYTE_CNT_START + ((ring) * SDP_VF_RING_OFFSET))
+
+/* SDP VF IQ Masks */
+#define SDP_VF_R_IN_CTL_RPVF_MASK (0xF)
+#define SDP_VF_R_IN_CTL_RPVF_POS (48)
+
+#define SDP_VF_R_IN_CTL_IDLE (0x1ull << 28)
+#define SDP_VF_R_IN_CTL_RDSIZE (0x3ull << 25) /* Setting to max(4) */
+#define SDP_VF_R_IN_CTL_IS_64B (0x1ull << 24)
+#define SDP_VF_R_IN_CTL_D_NSR (0x1ull << 8)
+#define SDP_VF_R_IN_CTL_D_ESR (0x1ull << 6)
+#define SDP_VF_R_IN_CTL_D_ROR (0x1ull << 5)
+#define SDP_VF_R_IN_CTL_NSR (0x1ull << 3)
+#define SDP_VF_R_IN_CTL_ESR (0x1ull << 1)
+#define SDP_VF_R_IN_CTL_ROR (0x1ull << 0)
+
+#define SDP_VF_R_IN_CTL_MASK \
+ (SDP_VF_R_IN_CTL_RDSIZE | SDP_VF_R_IN_CTL_IS_64B)
+
+/* SDP VF OQ Registers */
+#define SDP_VF_R_OUT_CNTS_START (0x10100)
+#define SDP_VF_R_OUT_INT_LEVELS_START (0x10110)
+#define SDP_VF_R_OUT_SLIST_BADDR_START (0x10120)
+#define SDP_VF_R_OUT_SLIST_RSIZE_START (0x10130)
+#define SDP_VF_R_OUT_SLIST_DBELL_START (0x10140)
+#define SDP_VF_R_OUT_CONTROL_START (0x10150)
+#define SDP_VF_R_OUT_ENABLE_START (0x10160)
+#define SDP_VF_R_OUT_PKT_CNT_START (0x10180)
+#define SDP_VF_R_OUT_BYTE_CNT_START (0x10190)
+
+#define SDP_VF_R_OUT_CONTROL(ring) \
+ (SDP_VF_R_OUT_CONTROL_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_ENABLE(ring) \
+ (SDP_VF_R_OUT_ENABLE_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_SLIST_BADDR(ring) \
+ (SDP_VF_R_OUT_SLIST_BADDR_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_SLIST_RSIZE(ring) \
+ (SDP_VF_R_OUT_SLIST_RSIZE_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_SLIST_DBELL(ring) \
+ (SDP_VF_R_OUT_SLIST_DBELL_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_CNTS(ring) \
+ (SDP_VF_R_OUT_CNTS_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_INT_LEVELS(ring) \
+ (SDP_VF_R_OUT_INT_LEVELS_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_PKT_CNT(ring) \
+ (SDP_VF_R_OUT_PKT_CNT_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_BYTE_CNT(ring) \
+ (SDP_VF_R_OUT_BYTE_CNT_START + ((ring) * SDP_VF_RING_OFFSET))
+
+/* SDP VF OQ Masks */
+#define SDP_VF_R_OUT_CTL_IDLE (1ull << 40)
+#define SDP_VF_R_OUT_CTL_ES_I (1ull << 34)
+#define SDP_VF_R_OUT_CTL_NSR_I (1ull << 33)
+#define SDP_VF_R_OUT_CTL_ROR_I (1ull << 32)
+#define SDP_VF_R_OUT_CTL_ES_D (1ull << 30)
+#define SDP_VF_R_OUT_CTL_NSR_D (1ull << 29)
+#define SDP_VF_R_OUT_CTL_ROR_D (1ull << 28)
+#define SDP_VF_R_OUT_CTL_ES_P (1ull << 26)
+#define SDP_VF_R_OUT_CTL_NSR_P (1ull << 25)
+#define SDP_VF_R_OUT_CTL_ROR_P (1ull << 24)
+#define SDP_VF_R_OUT_CTL_IMODE (1ull << 23)
+
+#define SDP_VF_R_OUT_INT_LEVELS_BMODE (1ull << 63)
+#define SDP_VF_R_OUT_INT_LEVELS_TIMET (32)
+
+/* SDP Instruction Header */
+struct sdp_instr_ih {
+ /* Data Len */
+ uint64_t tlen:16;
+
+ /* Reserved1 */
+ uint64_t rsvd1:20;
+
+ /* PKIND for SDP */
+ uint64_t pkind:6;
+
+ /* Front Data size */
+ uint64_t fsz:6;
+
+ /* No. of entries in gather list */
+ uint64_t gsz:14;
+
+ /* Gather indicator */
+ uint64_t gather:1;
+
+ /* Reserved2 */
+ uint64_t rsvd2:1;
+} __rte_packed;
+
+#endif /* __OTX2_SDP_HW_H_ */
+
diff --git a/drivers/common/octeontx2/otx2_common.c b/drivers/common/octeontx2/otx2_common.c
index 7e45366..1a257cf 100644
--- a/drivers/common/octeontx2/otx2_common.c
+++ b/drivers/common/octeontx2/otx2_common.c
@@ -205,6 +205,10 @@ int otx2_npa_lf_obj_ref(void)
* @internal
*/
int otx2_logtype_dpi;
+/**
+ * @internal
+ */
+int otx2_logtype_ep;
RTE_INIT(otx2_log_init);
static void
@@ -245,4 +249,9 @@ int otx2_npa_lf_obj_ref(void)
otx2_logtype_dpi = rte_log_register("pmd.raw.octeontx2.dpi");
if (otx2_logtype_dpi >= 0)
rte_log_set_level(otx2_logtype_dpi, RTE_LOG_NOTICE);
+
+ otx2_logtype_ep = rte_log_register("pmd.raw.octeontx2.ep");
+ if (otx2_logtype_ep >= 0)
+ rte_log_set_level(otx2_logtype_ep, RTE_LOG_NOTICE);
+
}
diff --git a/drivers/common/octeontx2/otx2_common.h b/drivers/common/octeontx2/otx2_common.h
index f62c45d..6bc55ca 100644
--- a/drivers/common/octeontx2/otx2_common.h
+++ b/drivers/common/octeontx2/otx2_common.h
@@ -16,6 +16,7 @@
#include "hw/otx2_nix.h"
#include "hw/otx2_npc.h"
#include "hw/otx2_npa.h"
+#include "hw/otx2_sdp.h"
#include "hw/otx2_sso.h"
#include "hw/otx2_ssow.h"
#include "hw/otx2_tim.h"
@@ -85,6 +86,7 @@ struct otx2_idev_cfg {
extern int otx2_logtype_tm;
extern int otx2_logtype_tim;
extern int otx2_logtype_dpi;
+extern int otx2_logtype_ep;
#define otx2_err(fmt, args...) \
RTE_LOG(ERR, PMD, "%s():%u " fmt "\n", \
@@ -107,6 +109,7 @@ struct otx2_idev_cfg {
#define otx2_tm_dbg(fmt, ...) otx2_dbg(tm, fmt, ##__VA_ARGS__)
#define otx2_tim_dbg(fmt, ...) otx2_dbg(tim, fmt, ##__VA_ARGS__)
#define otx2_dpi_dbg(fmt, ...) otx2_dbg(dpi, fmt, ##__VA_ARGS__)
+#define otx2_sdp_dbg(fmt, ...) otx2_dbg(ep, fmt, ##__VA_ARGS__)
/* PCI IDs */
#define PCI_VENDOR_ID_CAVIUM 0x177D
@@ -121,6 +124,7 @@ struct otx2_idev_cfg {
#define PCI_DEVID_OCTEONTX2_RVU_CPT_VF 0xA0FE
#define PCI_DEVID_OCTEONTX2_RVU_AF_VF 0xA0f8
#define PCI_DEVID_OCTEONTX2_DPI_VF 0xA081
+#define PCI_DEVID_OCTEONTX2_EP_VF 0xB203 /* OCTEON TX2 EP mode */
#define PCI_DEVID_OCTEONTX2_RVU_SDP_PF 0xA0f6
#define PCI_DEVID_OCTEONTX2_RVU_SDP_VF 0xA0f7
diff --git a/drivers/common/octeontx2/rte_common_octeontx2_version.map b/drivers/common/octeontx2/rte_common_octeontx2_version.map
index adad21a..a51d719 100644
--- a/drivers/common/octeontx2/rte_common_octeontx2_version.map
+++ b/drivers/common/octeontx2/rte_common_octeontx2_version.map
@@ -33,3 +33,9 @@ DPDK_20.0 {
local: *;
};
+
+EXPERIMENTAL {
+ global:
+
+ otx2_logtype_ep;
+};
diff --git a/drivers/raw/octeontx2_ep/Makefile b/drivers/raw/octeontx2_ep/Makefile
index 8cec6bd..02853fb 100644
--- a/drivers/raw/octeontx2_ep/Makefile
+++ b/drivers/raw/octeontx2_ep/Makefile
@@ -36,5 +36,8 @@ LIBABIVER := 1
# All source are stored in SRCS-y
#
SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_rawdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_enqdeq.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_vf.c
+
include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/raw/octeontx2_ep/meson.build b/drivers/raw/octeontx2_ep/meson.build
index e513131..99e6c6d 100644
--- a/drivers/raw/octeontx2_ep/meson.build
+++ b/drivers/raw/octeontx2_ep/meson.build
@@ -3,4 +3,6 @@
#
deps += ['bus_pci', 'common_octeontx2', 'rawdev']
-sources = files('otx2_ep_rawdev.c')
+sources = files('otx2_ep_rawdev.c',
+ 'otx2_ep_enqdeq.c',
+ 'otx2_ep_vf.c')
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
new file mode 100644
index 0000000..8857004
--- /dev/null
+++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
@@ -0,0 +1,294 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#include <string.h>
+#include <unistd.h>
+#include <dirent.h>
+#include <fcntl.h>
+
+#include <rte_bus.h>
+#include <rte_bus_pci.h>
+#include <rte_eal.h>
+#include <rte_lcore.h>
+#include <rte_mempool.h>
+#include <rte_pci.h>
+
+#include <rte_common.h>
+#include <rte_rawdev.h>
+#include <rte_rawdev_pmd.h>
+
+#include "otx2_common.h"
+#include "otx2_ep_enqdeq.h"
+
+/* IQ initialization */
+static int
+sdp_init_instr_queue(struct sdp_device *sdpvf, int iq_no)
+{
+ const struct sdp_config *conf;
+ struct sdp_instr_queue *iq;
+ uint32_t q_size;
+
+ conf = sdpvf->conf;
+ iq = sdpvf->instr_queue[iq_no];
+ q_size = conf->iq.instr_type * conf->num_iqdef_descs;
+
+ /* IQ memory creation for Instruction submission to OCTEON TX2 */
+ iq->iq_mz = rte_memzone_reserve_aligned("iqmz",
+ q_size,
+ rte_socket_id(),
+ RTE_MEMZONE_IOVA_CONTIG,
+ RTE_CACHE_LINE_SIZE);
+ if (iq->iq_mz == NULL) {
+ otx2_err("IQ[%d] memzone alloc failed", iq_no);
+ goto iq_init_fail;
+ }
+
+ iq->base_addr_dma = iq->iq_mz->iova;
+ iq->base_addr = (uint8_t *)iq->iq_mz->addr;
+
+ if (conf->num_iqdef_descs & (conf->num_iqdef_descs - 1)) {
+ otx2_err("IQ[%d] descs not in power of 2", iq_no);
+ goto iq_init_fail;
+ }
+
+ iq->nb_desc = conf->num_iqdef_descs;
+
+ /* Create a IQ request list to hold requests that have been
+ * posted to OCTEON TX2. This list will be used for freeing the IQ
+ * data buffer(s) later once the OCTEON TX2 fetched the requests.
+ */
+ iq->req_list = rte_zmalloc_socket("request_list",
+ (iq->nb_desc * SDP_IQREQ_LIST_SIZE),
+ RTE_CACHE_LINE_SIZE,
+ rte_socket_id());
+ if (iq->req_list == NULL) {
+ otx2_err("IQ[%d] req_list alloc failed", iq_no);
+ goto iq_init_fail;
+ }
+
+ otx2_info("IQ[%d]: base: %p basedma: %lx count: %d",
+ iq_no, iq->base_addr, (unsigned long)iq->base_addr_dma,
+ iq->nb_desc);
+
+ iq->sdp_dev = sdpvf;
+ iq->q_no = iq_no;
+ iq->fill_cnt = 0;
+ iq->host_write_index = 0;
+ iq->otx_read_index = 0;
+ iq->flush_index = 0;
+
+ /* Initialize the spinlock for this instruction queue */
+ rte_spinlock_init(&iq->lock);
+ rte_spinlock_init(&iq->post_lock);
+
+ rte_atomic64_clear(&iq->iq_flush_running);
+
+ sdpvf->io_qmask.iq |= (1ull << iq_no);
+
+ /* Set 32B/64B mode for each input queue */
+ if (conf->iq.instr_type == 64)
+ sdpvf->io_qmask.iq64B |= (1ull << iq_no);
+
+ iq->iqcmd_64B = (conf->iq.instr_type == 64);
+
+ /* Set up IQ registers */
+ sdpvf->fn_list.setup_iq_regs(sdpvf, iq_no);
+
+ return 0;
+
+iq_init_fail:
+ return -ENOMEM;
+
+}
+
+int
+sdp_setup_iqs(struct sdp_device *sdpvf, uint32_t iq_no)
+{
+ struct sdp_instr_queue *iq;
+
+ iq = (struct sdp_instr_queue *)rte_zmalloc("sdp_IQ", sizeof(*iq),
+ RTE_CACHE_LINE_SIZE);
+ if (iq == NULL)
+ return -ENOMEM;
+
+ sdpvf->instr_queue[iq_no] = iq;
+
+ if (sdp_init_instr_queue(sdpvf, iq_no)) {
+ otx2_err("IQ init is failed");
+ goto delete_IQ;
+ }
+ otx2_info("IQ[%d] is created.", sdpvf->num_iqs);
+
+ sdpvf->num_iqs++;
+
+
+ return 0;
+
+delete_IQ:
+ return -ENOMEM;
+}
+
+static void
+sdp_droq_reset_indices(struct sdp_droq *droq)
+{
+ droq->read_idx = 0;
+ droq->write_idx = 0;
+ droq->refill_idx = 0;
+ droq->refill_count = 0;
+ rte_atomic64_set(&droq->pkts_pending, 0);
+}
+
+static int
+sdp_droq_setup_ring_buffers(struct sdp_device *sdpvf,
+ struct sdp_droq *droq)
+{
+ struct sdp_droq_desc *desc_ring = droq->desc_ring;
+ uint32_t idx;
+ void *buf;
+
+ for (idx = 0; idx < droq->nb_desc; idx++) {
+ rte_mempool_get(sdpvf->enqdeq_mpool, &buf);
+ if (buf == NULL) {
+ otx2_err("OQ buffer alloc failed");
+ /* sdp_droq_destroy_ring_buffers(droq);*/
+ return -ENOMEM;
+ }
+
+ droq->recv_buf_list[idx].buffer = buf;
+ droq->info_list[idx].length = 0;
+
+ /* Map ring buffers into memory */
+ desc_ring[idx].info_ptr = (uint64_t)(droq->info_list_dma +
+ (idx * SDP_DROQ_INFO_SIZE));
+
+ desc_ring[idx].buffer_ptr = rte_mem_virt2iova(buf);
+ }
+
+ sdp_droq_reset_indices(droq);
+
+ return 0;
+}
+
+static void *
+sdp_alloc_info_buffer(struct sdp_device *sdpvf __rte_unused,
+ struct sdp_droq *droq)
+{
+ droq->info_mz = rte_memzone_reserve_aligned("OQ_info_list",
+ (droq->nb_desc * SDP_DROQ_INFO_SIZE),
+ rte_socket_id(),
+ RTE_MEMZONE_IOVA_CONTIG,
+ RTE_CACHE_LINE_SIZE);
+
+ if (droq->info_mz == NULL)
+ return NULL;
+
+ droq->info_list_dma = droq->info_mz->iova;
+ droq->info_alloc_size = droq->info_mz->len;
+ droq->info_base_addr = (size_t)droq->info_mz->addr;
+
+ return droq->info_mz->addr;
+}
+
+/* OQ initialization */
+static int
+sdp_init_droq(struct sdp_device *sdpvf, uint32_t q_no)
+{
+ const struct sdp_config *conf = sdpvf->conf;
+ uint32_t c_refill_threshold;
+ uint32_t desc_ring_size;
+ struct sdp_droq *droq;
+
+ otx2_info("OQ[%d] Init start", q_no);
+
+ droq = sdpvf->droq[q_no];
+ droq->sdp_dev = sdpvf;
+ droq->q_no = q_no;
+
+ c_refill_threshold = conf->oq.refill_threshold;
+ droq->nb_desc = conf->num_oqdef_descs;
+ droq->buffer_size = conf->oqdef_buf_size;
+
+ /* OQ desc_ring set up */
+ desc_ring_size = droq->nb_desc * SDP_DROQ_DESC_SIZE;
+ droq->desc_ring_mz = rte_memzone_reserve_aligned("sdp_oqmz",
+ desc_ring_size,
+ rte_socket_id(),
+ RTE_MEMZONE_IOVA_CONTIG,
+ RTE_CACHE_LINE_SIZE);
+
+ if (droq->desc_ring_mz == NULL) {
+ otx2_err("OQ:%d desc_ring allocation failed", q_no);
+ goto init_droq_fail;
+ }
+
+ droq->desc_ring_dma = droq->desc_ring_mz->iova;
+ droq->desc_ring = (struct sdp_droq_desc *)droq->desc_ring_mz->addr;
+
+ otx2_sdp_dbg("OQ[%d]: desc_ring: virt: 0x%p, dma: %lx",
+ q_no, droq->desc_ring, (unsigned long)droq->desc_ring_dma);
+ otx2_sdp_dbg("OQ[%d]: num_desc: %d", q_no, droq->nb_desc);
+
+
+ /* OQ info_list set up */
+ droq->info_list = sdp_alloc_info_buffer(sdpvf, droq);
+ if (droq->info_list == NULL) {
+ otx2_err("memory allocation failed for OQ[%d] info_list", q_no);
+ goto init_droq_fail;
+ }
+
+ /* OQ buf_list set up */
+ droq->recv_buf_list = rte_zmalloc_socket("recv_buf_list",
+ (droq->nb_desc * SDP_DROQ_RECVBUF_SIZE),
+ RTE_CACHE_LINE_SIZE, rte_socket_id());
+ if (droq->recv_buf_list == NULL) {
+ otx2_err("OQ recv_buf_list alloc failed");
+ goto init_droq_fail;
+ }
+
+ if (sdp_droq_setup_ring_buffers(sdpvf, droq))
+ goto init_droq_fail;
+
+ droq->refill_threshold = c_refill_threshold;
+ rte_spinlock_init(&droq->lock);
+
+
+ /* Set up OQ registers */
+ sdpvf->fn_list.setup_oq_regs(sdpvf, q_no);
+
+ sdpvf->io_qmask.oq |= (1ull << q_no);
+
+ return 0;
+
+init_droq_fail:
+ return -ENOMEM;
+}
+
+/* OQ configuration and setup */
+int
+sdp_setup_oqs(struct sdp_device *sdpvf, uint32_t oq_no)
+{
+ struct sdp_droq *droq;
+
+ /* Allocate new droq. */
+ droq = (struct sdp_droq *)rte_zmalloc("sdp_OQ",
+ sizeof(*droq), RTE_CACHE_LINE_SIZE);
+ if (droq == NULL) {
+ otx2_err("Droq[%d] Creation Failed", oq_no);
+ return -ENOMEM;
+ }
+ sdpvf->droq[oq_no] = droq;
+
+ if (sdp_init_droq(sdpvf, oq_no)) {
+ otx2_err("Droq[%d] Initialization failed", oq_no);
+ goto delete_OQ;
+ }
+ otx2_info("OQ[%d] is created.", oq_no);
+
+ sdpvf->num_oqs++;
+
+ return 0;
+
+delete_OQ:
+ return -ENOMEM;
+}
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
new file mode 100644
index 0000000..4c28283
--- /dev/null
+++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#ifndef _OTX2_EP_ENQDEQ_H_
+#define _OTX2_EP_ENQDEQ_H_
+
+#include <rte_byteorder.h>
+#include "otx2_ep_rawdev.h"
+
+#endif /* _OTX2_EP_ENQDEQ_H_ */
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
index 04b4fac..0c56609 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
@@ -17,6 +17,7 @@
#include "otx2_common.h"
#include "otx2_ep_rawdev.h"
+#include "otx2_ep_vf.h"
static const struct rte_pci_id pci_sdp_vf_map[] = {
{
@@ -28,6 +29,152 @@
},
};
+/* SDP_VF default configuration */
+const struct sdp_config default_sdp_conf = {
+ /* IQ attributes */
+ .iq = {
+ .max_iqs = SDP_VF_CFG_IO_QUEUES,
+ .instr_type = SDP_VF_64BYTE_INSTR,
+ .pending_list_size = (SDP_VF_MAX_IQ_DESCRIPTORS *
+ SDP_VF_CFG_IO_QUEUES),
+ },
+
+ /* OQ attributes */
+ .oq = {
+ .max_oqs = SDP_VF_CFG_IO_QUEUES,
+ .info_ptr = SDP_VF_OQ_INFOPTR_MODE,
+ .refill_threshold = SDP_VF_OQ_REFIL_THRESHOLD,
+ },
+
+ .num_iqdef_descs = SDP_VF_MAX_IQ_DESCRIPTORS,
+ .num_oqdef_descs = SDP_VF_MAX_OQ_DESCRIPTORS,
+ .oqdef_buf_size = SDP_VF_OQ_BUF_SIZE,
+
+};
+
+const struct sdp_config*
+sdp_get_defconf(struct sdp_device *sdp_dev __rte_unused)
+{
+ const struct sdp_config *default_conf = NULL;
+
+ default_conf = &default_sdp_conf;
+
+ return default_conf;
+}
+
+static int
+sdp_chip_specific_setup(struct sdp_device *sdpvf)
+{
+ struct rte_pci_device *pdev = sdpvf->pci_dev;
+ uint32_t dev_id = pdev->id.device_id;
+ int ret;
+
+ switch (dev_id) {
+ case PCI_DEVID_OCTEONTX2_EP_VF:
+ sdpvf->chip_id = PCI_DEVID_OCTEONTX2_EP_VF;
+ ret = sdp_vf_setup_device(sdpvf);
+
+ break;
+ default:
+ otx2_err("Unsupported device");
+ ret = -EINVAL;
+ }
+
+ if (!ret)
+ otx2_info("SDP dev_id[%d]", dev_id);
+
+ return ret;
+}
+
+/* SDP VF device initialization */
+static int
+sdp_vfdev_init(struct sdp_device *sdpvf)
+{
+ uint32_t rawdev_queues, q;
+
+ if (sdp_chip_specific_setup(sdpvf)) {
+ otx2_err("Chip specific setup failed");
+ goto setup_fail;
+ }
+
+ if (sdpvf->fn_list.setup_device_regs(sdpvf)) {
+ otx2_err("Failed to configure device registers");
+ goto setup_fail;
+ }
+
+ rawdev_queues = (uint32_t)(sdpvf->sriov_info.rings_per_vf);
+
+ /* Rawdev queues setup for enqueue/dequeue */
+ for (q = 0; q < rawdev_queues; q++) {
+ if (sdp_setup_iqs(sdpvf, q)) {
+ otx2_err("Failed to setup IQs");
+ goto iq_fail;
+ }
+ }
+ otx2_info("Total[%d] IQs setup", sdpvf->num_iqs);
+
+ for (q = 0; q < rawdev_queues; q++) {
+ if (sdp_setup_oqs(sdpvf, q)) {
+ otx2_err("Failed to setup OQs");
+ goto oq_fail;
+ }
+ }
+ otx2_info("Total [%d] OQs setup", sdpvf->num_oqs);
+
+ /* Enable IQ/OQ for this device */
+ sdpvf->fn_list.enable_io_queues(sdpvf);
+
+ /* Send OQ desc credits for OQs, credits are always
+ * sent after the OQs are enabled.
+ */
+ for (q = 0; q < rawdev_queues; q++) {
+ rte_write32(sdpvf->droq[q]->nb_desc,
+ sdpvf->droq[q]->pkts_credit_reg);
+
+ rte_io_mb();
+ otx2_info("OQ[%d] dbells [%d]", q,
+ rte_read32(sdpvf->droq[q]->pkts_credit_reg));
+ }
+
+ rte_wmb();
+
+ otx2_info("SDP Device is Ready");
+
+ return 0;
+
+oq_fail:
+iq_fail:
+setup_fail:
+ return -ENOMEM;
+}
+
+static int
+sdp_rawdev_configure(const struct rte_rawdev *dev, rte_rawdev_obj_t config)
+{
+ struct sdp_rawdev_info *app_info = (struct sdp_rawdev_info *)config;
+ struct sdp_device *sdpvf;
+
+ if (app_info == NULL) {
+ otx2_err("Application config info [NULL]");
+ return -EINVAL;
+ }
+
+ sdpvf = (struct sdp_device *)dev->dev_private;
+
+ sdpvf->conf = app_info->app_conf;
+ sdpvf->enqdeq_mpool = app_info->enqdeq_mpool;
+
+ sdp_vfdev_init(sdpvf);
+
+ return 0;
+
+}
+
+/* SDP VF endpoint rawdev ops */
+static const struct rte_rawdev_ops sdp_rawdev_ops = {
+ .dev_configure = sdp_rawdev_configure,
+};
+
static int
otx2_sdp_rawdev_probe(struct rte_pci_driver *pci_drv __rte_unused,
struct rte_pci_device *pci_dev)
@@ -66,6 +213,7 @@
return -ENOMEM;
}
+ sdp_rawdev->dev_ops = &sdp_rawdev_ops;
sdp_rawdev->device = &pci_dev->device;
sdp_rawdev->driver_name = pci_dev->driver->driver.name;
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
index 7ae7a08..bb36b6a 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
@@ -5,17 +5,449 @@
#ifndef _OTX2_EP_RAWDEV_H_
#define _OTX2_EP_RAWDEV_H_
-#define PCI_DEVID_OCTEONTX2_EP_VF 0xB203 /* OCTEON TX2 EP mode */
+#include <rte_byteorder.h>
+#include <rte_spinlock.h>
+
+
+/* Input Request Header format */
+struct sdp_instr_irh {
+ /* Request ID */
+ uint64_t rid:16;
+
+ /* PCIe port to use for response */
+ uint64_t pcie_port:3;
+
+ /* Scatter indicator 1=scatter */
+ uint64_t scatter:1;
+
+ /* Size of Expected result OR no. of entries in scatter list */
+ uint64_t rlenssz:14;
+
+ /* Desired destination port for result */
+ uint64_t dport:6;
+
+ /* Opcode Specific parameters */
+ uint64_t param:8;
+
+ /* Opcode for the return packet */
+ uint64_t opcode:16;
+};
+
+/* SDP 32B instruction format */
+struct sdp_instr_32B {
+ /* Pointer where the input data is available. */
+ uint64_t dptr;
+
+ /* SDP Instruction Header. */
+ uint64_t ih;
+
+ /** Pointer where the response for a RAW mode packet
+ * will be written by OCTEON TX2.
+ */
+ uint64_t rptr;
+
+ /* Input Request Header. Additional info about the input. */
+ uint64_t irh;
+};
+#define SDP_32B_INSTR_SIZE (sizeof(sdp_instr_32B))
+
+/* SDP 64B instruction format */
+struct sdp_instr_64B {
+ /* Pointer where the input data is available. */
+ uint64_t dptr;
+
+ /* SDP Instruction Header. */
+ uint64_t ih;
+
+ /** Pointer where the response for a RAW mode packet
+ * will be written by OCTEON TX2.
+ */
+ uint64_t rptr;
+
+ /* Input Request Header. */
+ uint64_t irh;
+
+ /* Additional headers available in a 64-byte instruction. */
+ uint64_t exhdr[4];
+};
+#define SDP_64B_INSTR_SIZE (sizeof(sdp_instr_64B))
+
+struct sdp_soft_instr {
+ /** Input data pointer. It is either pointing directly to input data
+ * or to a gather list.
+ */
+ void *dptr;
+
+ /** Response from OCTEON TX2 comes at this address. It is either
+ * directlty pointing to output data buffer or to a scatter list.
+ */
+ void *rptr;
+
+ /* The instruction header. All input commands have this field. */
+ struct sdp_instr_ih ih;
+
+ /* Input request header. */
+ struct sdp_instr_irh irh;
+
+ /** The PCI instruction to be sent to OCTEON TX2. This is stored in the
+ * instr to retrieve the physical address of buffers when instr is
+ * freed.
+ */
+ struct sdp_instr_64B command;
+
+ /** If a gather list was allocated, this ptr points to the buffer used
+ * for the gather list. The gather list has to be 8B aligned, so this
+ * value may be different from dptr.
+ */
+ void *gather_ptr;
+
+ /* Total data bytes transferred in the gather mode request. */
+ uint64_t gather_bytes;
+
+ /** If a scatter list was allocated, this ptr points to the buffer used
+ * for the scatter list. The scatter list has to be 8B aligned, so
+ * this value may be different from rptr.
+ */
+ void *scatter_ptr;
+
+ /* Total data bytes to be received in the scatter mode request. */
+ uint64_t scatter_bytes;
+
+ /* IQ number to which this instruction has to be submitted. */
+ uint32_t q_no;
+
+ /* IQ instruction request type. */
+ uint32_t reqtype;
+};
+#define SDP_SOFT_INSTR_SIZE (sizeof(sdp_soft_instr))
+
+/* SDP IQ request list */
+struct sdp_instr_list {
+ void *buf;
+ uint32_t reqtype;
+};
+#define SDP_IQREQ_LIST_SIZE (sizeof(struct sdp_instr_list))
+
+/* Structure to define the configuration attributes for each Input queue. */
+struct sdp_iq_config {
+ /* Max number of IQs available */
+ uint16_t max_iqs;
+
+ /* Command size - 32 or 64 bytes */
+ uint16_t instr_type;
+
+ /* Pending list size, usually set to the sum of the size of all IQs */
+ uint32_t pending_list_size;
+};
+
+/** The instruction (input) queue.
+ * The input queue is used to post raw (instruction) mode data or packet data
+ * to OCTEON TX2 device from the host. Each IQ of a SDP EP VF device has one
+ * such structure to represent it.
+ */
+struct sdp_instr_queue {
+ /* A spinlock to protect access to the input ring. */
+ rte_spinlock_t lock;
+ rte_spinlock_t post_lock;
+
+ struct sdp_device *sdp_dev;
+ rte_atomic64_t iq_flush_running;
+
+ uint32_t q_no;
+ uint32_t pkt_in_done;
+
+ /* Flag for 64 byte commands. */
+ uint32_t iqcmd_64B:1;
+ uint32_t rsvd:17;
+ uint32_t status:8;
+
+ /* Number of descriptors in this ring. */
+ uint32_t nb_desc;
+
+ /* Input ring index, where the driver should write the next packet */
+ uint32_t host_write_index;
+
+ /* Input ring index, where the OCTEON TX2 should read the next packet */
+ uint32_t otx_read_index;
+
+ /** This index aids in finding the window in the queue where OCTEON TX2
+ * has read the commands.
+ */
+ uint32_t flush_index;
+
+ /* This keeps track of the instructions pending in this queue. */
+ rte_atomic64_t instr_pending;
+
+ uint32_t reset_instr_cnt;
+
+ /* Pointer to the Virtual Base addr of the input ring. */
+ uint8_t *base_addr;
+
+ /* This IQ request list */
+ struct sdp_instr_list *req_list;
+
+ /* SDP doorbell register for the ring. */
+ void *doorbell_reg;
+
+ /* SDP instruction count register for this ring. */
+ void *inst_cnt_reg;
+
+ /* Number of instructions pending to be posted to OCTEON TX2. */
+ uint32_t fill_cnt;
+
+ /* DMA mapped base address of the input descriptor ring. */
+ uint64_t base_addr_dma;
+
+ /* Memory zone */
+ const struct rte_memzone *iq_mz;
+};
+
+/* DROQ packet format for application i/f. */
+struct sdp_droq_pkt {
+ /* DROQ packet data buffer pointer. */
+ uint8_t *data;
+
+ /* DROQ packet data length */
+ uint32_t len;
+
+ uint32_t misc;
+};
+
+/** Descriptor format.
+ * The descriptor ring is made of descriptors which have 2 64-bit values:
+ * -# Physical (bus) address of the data buffer.
+ * -# Physical (bus) address of a sdp_droq_info structure.
+ * The device DMA's incoming packets and its information at the address
+ * given by these descriptor fields.
+ */
+struct sdp_droq_desc {
+ /* The buffer pointer */
+ uint64_t buffer_ptr;
+
+ /* The Info pointer */
+ uint64_t info_ptr;
+};
+#define SDP_DROQ_DESC_SIZE (sizeof(struct sdp_droq_desc))
+
+/* Receive Header */
+union sdp_rh {
+ uint64_t rh64;
+};
+#define SDP_RH_SIZE (sizeof(union sdp_rh))
+
+/** Information about packet DMA'ed by OCTEON TX2.
+ * The format of the information available at Info Pointer after OCTEON TX2
+ * has posted a packet. Not all descriptors have valid information. Only
+ * the Info field of the first descriptor for a packet has information
+ * about the packet.
+ */
+struct sdp_droq_info {
+ /* The Output Receive Header. */
+ union sdp_rh rh;
+
+ /* The Length of the packet. */
+ uint64_t length;
+};
+#define SDP_DROQ_INFO_SIZE (sizeof(struct sdp_droq_info))
+
+/** Pointer to data buffer.
+ * Driver keeps a pointer to the data buffer that it made available to
+ * the OCTEON TX2 device. Since the descriptor ring keeps physical (bus)
+ * addresses, this field is required for the driver to keep track of
+ * the virtual address pointers.
+ */
+struct sdp_recv_buffer {
+ /* Packet buffer, including meta data. */
+ void *buffer;
+
+ /* Data in the packet buffer. */
+ /* uint8_t *data; */
+};
+#define SDP_DROQ_RECVBUF_SIZE (sizeof(struct sdp_recv_buffer))
+
+/* Structure to define the configuration attributes for each Output queue. */
+struct sdp_oq_config {
+ /* Max number of OQs available */
+ uint16_t max_oqs;
+
+ /* If set, the Output queue uses info-pointer mode. (Default: 1 ) */
+ uint16_t info_ptr;
+
+ /** The number of buffers that were consumed during packet processing by
+ * the driver on this Output queue before the driver attempts to
+ * replenish the descriptor ring with new buffers.
+ */
+ uint32_t refill_threshold;
+};
+
+/* The Descriptor Ring Output Queue(DROQ) structure. */
+struct sdp_droq {
+ /* A spinlock to protect access to this ring. */
+ rte_spinlock_t lock;
+
+ struct sdp_device *sdp_dev;
+ /* The 8B aligned descriptor ring starts at this address. */
+ struct sdp_droq_desc *desc_ring;
+
+ uint32_t q_no;
+ uint32_t last_pkt_count;
+
+ /* Driver should read the next packet at this index */
+ uint32_t read_idx;
+
+ /* OCTEON TX2 will write the next packet at this index */
+ uint32_t write_idx;
+
+ /* At this index, the driver will refill the descriptor's buffer */
+ uint32_t refill_idx;
+
+ /* Packets pending to be processed */
+ rte_atomic64_t pkts_pending;
+
+ /* Number of descriptors in this ring. */
+ uint32_t nb_desc;
+
+ /* The number of descriptors pending to refill. */
+ uint32_t refill_count;
+
+ uint32_t refill_threshold;
+
+ /* The 8B aligned info ptrs begin from this address. */
+ struct sdp_droq_info *info_list;
+
+ /* receive buffer list contains virtual addresses of the buffers. */
+ struct sdp_recv_buffer *recv_buf_list;
+
+ /* The size of each buffer pointed by the buffer pointer. */
+ uint32_t buffer_size;
+
+ /** Pointer to the mapped packet credit register.
+ * Host writes number of info/buffer ptrs available to this register
+ */
+ void *pkts_credit_reg;
+
+ /** Pointer to the mapped packet sent register. OCTEON TX2 writes the
+ * number of packets DMA'ed to host memory in this register.
+ */
+ void *pkts_sent_reg;
+
+ /* DMA mapped address of the DROQ descriptor ring. */
+ size_t desc_ring_dma;
+
+ /* Info_ptr list is allocated at this virtual address. */
+ size_t info_base_addr;
+
+ /* DMA mapped address of the info list */
+ size_t info_list_dma;
+
+ /* Allocated size of info list. */
+ uint32_t info_alloc_size;
+
+ /* Memory zone **/
+ const struct rte_memzone *desc_ring_mz;
+ const struct rte_memzone *info_mz;
+};
+#define SDP_DROQ_SIZE (sizeof(struct sdp_droq))
+
+/* IQ/OQ mask */
+struct sdp_io_enable {
+ uint64_t iq;
+ uint64_t oq;
+ uint64_t iq64B;
+};
+
+/* Structure to define the configuration. */
+struct sdp_config {
+ /* Input Queue attributes. */
+ struct sdp_iq_config iq;
+
+ /* Output Queue attributes. */
+ struct sdp_oq_config oq;
+
+ /* Num of desc for IQ rings */
+ uint32_t num_iqdef_descs;
+
+ /* Num of desc for OQ rings */
+ uint32_t num_oqdef_descs;
+
+ /* OQ buffer size */
+ uint32_t oqdef_buf_size;
+};
+
+/* Required functions for each VF device */
+struct sdp_fn_list {
+ void (*setup_iq_regs)(struct sdp_device *sdpvf, uint32_t q_no);
+ void (*setup_oq_regs)(struct sdp_device *sdpvf, uint32_t q_no);
+ int (*setup_device_regs)(struct sdp_device *sdpvf);
+ void (*enable_io_queues)(struct sdp_device *sdpvf);
+ void (*enable_iq)(struct sdp_device *sdpvf, uint32_t q_no);
+ void (*enable_oq)(struct sdp_device *sdpvf, uint32_t q_no);
+};
+
+/* SRIOV information */
+struct sdp_sriov_info {
+ /* Number of rings assigned to VF */
+ uint32_t rings_per_vf;
+
+ /* Number of VF devices enabled */
+ uint32_t num_vfs;
+};
+
+
+/* Information to be passed from application */
+struct sdp_rawdev_info {
+ struct rte_mempool *enqdeq_mpool;
+ const struct sdp_config *app_conf;
+};
/* SDP EP VF device */
struct sdp_device {
/* PCI device pointer */
struct rte_pci_device *pci_dev;
+ uint16_t chip_id;
+ uint16_t pf_num;
uint16_t vf_num;
+ /* This device's PCIe port used for traffic. */
+ uint16_t pcie_port;
+ uint32_t pkind;
+
+ /* The state of this device */
+ rte_atomic64_t status;
+
/* Memory mapped h/w address */
uint8_t *hw_addr;
+ struct sdp_fn_list fn_list;
+
+ /* Num IQs */
+ uint32_t num_iqs;
+
+ /* The input instruction queues */
+ struct sdp_instr_queue *instr_queue[SDP_VF_MAX_IOQS_PER_RAWDEV];
+
+ /* Num OQs */
+ uint32_t num_oqs;
+
+ /* The DROQ output queues */
+ struct sdp_droq *droq[SDP_VF_MAX_IOQS_PER_RAWDEV];
+
+ /* IOQ data buffer pool */
+ struct rte_mempool *enqdeq_mpool;
+
+ /* IOQ mask */
+ struct sdp_io_enable io_qmask;
+
+ /* SR-IOV info */
+ struct sdp_sriov_info sriov_info;
+
+ /* Device configuration */
+ const struct sdp_config *conf;
};
+const struct sdp_config *sdp_get_defconf(struct sdp_device *sdp_dev);
+int sdp_setup_iqs(struct sdp_device *sdpvf, uint32_t iq_no);
+
+int sdp_setup_oqs(struct sdp_device *sdpvf, uint32_t oq_no);
+
#endif /* _OTX2_EP_RAWDEV_H_ */
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_vf.c b/drivers/raw/octeontx2_ep/otx2_ep_vf.c
new file mode 100644
index 0000000..b6120eb
--- /dev/null
+++ b/drivers/raw/octeontx2_ep/otx2_ep_vf.c
@@ -0,0 +1,408 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#include <rte_common.h>
+#include <rte_rawdev.h>
+#include <rte_rawdev_pmd.h>
+
+#include "otx2_common.h"
+#include "otx2_ep_rawdev.h"
+#include "otx2_ep_vf.h"
+
+static int
+sdp_vf_reset_iq(struct sdp_device *sdpvf, int q_no)
+{
+ uint64_t loop = SDP_VF_BUSY_LOOP_COUNT;
+ volatile uint64_t d64 = 0ull;
+
+ /* There is no RST for a ring.
+ * Clear all registers one by one after disabling the ring
+ */
+
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_ENABLE(q_no));
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_INSTR_BADDR(q_no));
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_INSTR_RSIZE(q_no));
+
+ d64 = 0xFFFFFFFF; /* ~0ull */
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_INSTR_DBELL(q_no));
+ d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_INSTR_DBELL(q_no));
+
+ while ((d64 != 0) && loop--) {
+ otx2_write64(d64, sdpvf->hw_addr +
+ SDP_VF_R_IN_INSTR_DBELL(q_no));
+
+ rte_delay_ms(1);
+
+ d64 = otx2_read64(sdpvf->hw_addr +
+ SDP_VF_R_IN_INSTR_DBELL(q_no));
+ }
+
+ loop = SDP_VF_BUSY_LOOP_COUNT;
+ d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CNTS(q_no));
+ while ((d64 != 0) && loop--) {
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_CNTS(q_no));
+
+ rte_delay_ms(1);
+
+ d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CNTS(q_no));
+ }
+
+ d64 = 0ull;
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_INT_LEVELS(q_no));
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_PKT_CNT(q_no));
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_BYTE_CNT(q_no));
+
+ return 0;
+}
+
+static int
+sdp_vf_reset_oq(struct sdp_device *sdpvf, int q_no)
+{
+ uint64_t loop = SDP_VF_BUSY_LOOP_COUNT;
+ volatile uint64_t d64 = 0ull;
+
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_ENABLE(q_no));
+
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_SLIST_BADDR(q_no));
+
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_SLIST_RSIZE(q_no));
+
+ d64 = 0xFFFFFFFF;
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_SLIST_DBELL(q_no));
+ d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_SLIST_DBELL(q_no));
+
+ while ((d64 != 0) && loop--) {
+ otx2_write64(d64, sdpvf->hw_addr +
+ SDP_VF_R_OUT_SLIST_DBELL(q_no));
+
+ rte_delay_ms(1);
+
+ d64 = otx2_read64(sdpvf->hw_addr +
+ SDP_VF_R_OUT_SLIST_DBELL(q_no));
+ }
+
+ loop = SDP_VF_BUSY_LOOP_COUNT;
+ d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CNTS(q_no));
+ while ((d64 != 0) && (loop--)) {
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_CNTS(q_no));
+
+ rte_delay_ms(1);
+
+ d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CNTS(q_no));
+ }
+
+ d64 = 0ull;
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_INT_LEVELS(q_no));
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_PKT_CNT(q_no));
+ otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_BYTE_CNT(q_no));
+
+ return 0;
+}
+
+static void
+sdp_vf_setup_global_iq_reg(struct sdp_device *sdpvf, int q_no)
+{
+ volatile uint64_t reg_val = 0ull;
+
+ /* Select ES, RO, NS, RDSIZE,DPTR Fomat#0 for IQs
+ * IS_64B is by default enabled.
+ */
+ reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CONTROL(q_no));
+
+ reg_val |= SDP_VF_R_IN_CTL_RDSIZE;
+ reg_val |= SDP_VF_R_IN_CTL_IS_64B;
+ reg_val |= SDP_VF_R_IN_CTL_ESR;
+
+ otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_IN_CONTROL(q_no));
+
+}
+
+static void
+sdp_vf_setup_global_oq_reg(struct sdp_device *sdpvf, int q_no)
+{
+ volatile uint64_t reg_val = 0ull;
+
+ reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CONTROL(q_no));
+
+ reg_val |= (SDP_VF_R_OUT_CTL_IMODE);
+
+ reg_val &= ~(SDP_VF_R_OUT_CTL_ROR_P);
+ reg_val &= ~(SDP_VF_R_OUT_CTL_NSR_P);
+ reg_val &= ~(SDP_VF_R_OUT_CTL_ROR_I);
+ reg_val &= ~(SDP_VF_R_OUT_CTL_NSR_I);
+ reg_val &= ~(SDP_VF_R_OUT_CTL_ES_I);
+ reg_val &= ~(SDP_VF_R_OUT_CTL_ROR_D);
+ reg_val &= ~(SDP_VF_R_OUT_CTL_NSR_D);
+ reg_val &= ~(SDP_VF_R_OUT_CTL_ES_D);
+
+ /* INFO/DATA ptr swap is required */
+ reg_val |= (SDP_VF_R_OUT_CTL_ES_P);
+
+ otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_OUT_CONTROL(q_no));
+
+}
+
+static int
+sdp_vf_reset_input_queues(struct sdp_device *sdpvf)
+{
+ uint32_t q_no = 0;
+
+ otx2_sdp_dbg("%s :", __func__);
+
+ for (q_no = 0; q_no < sdpvf->sriov_info.rings_per_vf; q_no++)
+ sdp_vf_reset_iq(sdpvf, q_no);
+
+ return 0;
+}
+
+static int
+sdp_vf_reset_output_queues(struct sdp_device *sdpvf)
+{
+ uint64_t q_no = 0ull;
+
+ otx2_sdp_dbg(" %s :", __func__);
+
+ for (q_no = 0; q_no < sdpvf->sriov_info.rings_per_vf; q_no++)
+ sdp_vf_reset_oq(sdpvf, q_no);
+
+ return 0;
+}
+
+static void
+sdp_vf_setup_global_input_regs(struct sdp_device *sdpvf)
+{
+ uint64_t q_no = 0ull;
+
+ sdp_vf_reset_input_queues(sdpvf);
+
+ for (q_no = 0; q_no < (sdpvf->sriov_info.rings_per_vf); q_no++)
+ sdp_vf_setup_global_iq_reg(sdpvf, q_no);
+}
+
+static void
+sdp_vf_setup_global_output_regs(struct sdp_device *sdpvf)
+{
+ uint32_t q_no;
+
+ sdp_vf_reset_output_queues(sdpvf);
+
+ for (q_no = 0; q_no < (sdpvf->sriov_info.rings_per_vf); q_no++)
+ sdp_vf_setup_global_oq_reg(sdpvf, q_no);
+
+}
+
+static int
+sdp_vf_setup_device_regs(struct sdp_device *sdpvf)
+{
+ sdp_vf_setup_global_input_regs(sdpvf);
+ sdp_vf_setup_global_output_regs(sdpvf);
+
+ return 0;
+}
+
+static void
+sdp_vf_setup_iq_regs(struct sdp_device *sdpvf, uint32_t iq_no)
+{
+ struct sdp_instr_queue *iq = sdpvf->instr_queue[iq_no];
+ volatile uint64_t reg_val = 0ull;
+
+ reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CONTROL(iq_no));
+
+ /* Wait till IDLE to set to 1, not supposed to configure BADDR
+ * as long as IDLE is 0
+ */
+ if (!(reg_val & SDP_VF_R_IN_CTL_IDLE)) {
+ do {
+ reg_val = otx2_read64(sdpvf->hw_addr +
+ SDP_VF_R_IN_CONTROL(iq_no));
+ } while (!(reg_val & SDP_VF_R_IN_CTL_IDLE));
+ }
+
+ /* Write the start of the input queue's ring and its size */
+ otx2_write64(iq->base_addr_dma, sdpvf->hw_addr +
+ SDP_VF_R_IN_INSTR_BADDR(iq_no));
+ otx2_write64(iq->nb_desc, sdpvf->hw_addr +
+ SDP_VF_R_IN_INSTR_RSIZE(iq_no));
+
+ /* Remember the doorbell & instruction count register addr
+ * for this queue
+ */
+ iq->doorbell_reg = (uint8_t *) sdpvf->hw_addr +
+ SDP_VF_R_IN_INSTR_DBELL(iq_no);
+ iq->inst_cnt_reg = (uint8_t *) sdpvf->hw_addr +
+ SDP_VF_R_IN_CNTS(iq_no);
+
+ otx2_sdp_dbg("InstQ[%d]:dbell reg @ 0x%p instcnt_reg @ 0x%p",
+ iq_no, iq->doorbell_reg, iq->inst_cnt_reg);
+
+ /* Store the current instrn counter(used in flush_iq calculation) */
+ iq->reset_instr_cnt = rte_read32(iq->inst_cnt_reg);
+
+ /* IN INTR_THRESHOLD is set to max(FFFFFFFF) which disable the IN INTR
+ * to raise
+ */
+ reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_INT_LEVELS(iq_no));
+ reg_val = 0xffffffff;
+
+ otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_IN_INT_LEVELS(iq_no));
+
+}
+
+static void
+sdp_vf_setup_oq_regs(struct sdp_device *sdpvf, uint32_t oq_no)
+{
+ volatile uint64_t reg_val = 0ull;
+ uint64_t oq_ctl = 0ull;
+
+ struct sdp_droq *droq = sdpvf->droq[oq_no];
+
+ /* Wait on IDLE to set to 1, supposed to configure BADDR
+ * as log as IDLE is 0
+ */
+ reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CONTROL(oq_no));
+
+ while (!(reg_val & SDP_VF_R_OUT_CTL_IDLE)) {
+ reg_val = otx2_read64(sdpvf->hw_addr +
+ SDP_VF_R_OUT_CONTROL(oq_no));
+ }
+
+ otx2_write64(droq->desc_ring_dma, sdpvf->hw_addr +
+ SDP_VF_R_OUT_SLIST_BADDR(oq_no));
+ otx2_write64(droq->nb_desc, sdpvf->hw_addr +
+ SDP_VF_R_OUT_SLIST_RSIZE(oq_no));
+
+ oq_ctl = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CONTROL(oq_no));
+
+ /* Clear the ISIZE and BSIZE (22-0) */
+ oq_ctl &= ~(0x7fffffull);
+
+ /* Populate the BSIZE (15-0) */
+ oq_ctl |= (droq->buffer_size & 0xffff);
+
+ /* Populate ISIZE(22-16) */
+ oq_ctl |= ((SDP_RH_SIZE << 16) & 0x7fffff);
+ otx2_write64(oq_ctl, sdpvf->hw_addr + SDP_VF_R_OUT_CONTROL(oq_no));
+
+ /* Mapped address of the pkt_sent and pkts_credit regs */
+ droq->pkts_sent_reg = (uint8_t *) sdpvf->hw_addr +
+ SDP_VF_R_OUT_CNTS(oq_no);
+ droq->pkts_credit_reg = (uint8_t *) sdpvf->hw_addr +
+ SDP_VF_R_OUT_SLIST_DBELL(oq_no);
+
+ reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_INT_LEVELS(oq_no));
+
+ /* Clear PKT_CNT register */
+ rte_write64(0xFFFFFFFFF, (uint8_t *)sdpvf->hw_addr +
+ SDP_VF_R_OUT_PKT_CNT(oq_no));
+
+ /* Clear the OQ doorbell */
+ rte_write32(0xFFFFFFFF, droq->pkts_credit_reg);
+ while ((rte_read32(droq->pkts_credit_reg) != 0ull)) {
+ rte_write32(0xFFFFFFFF, droq->pkts_credit_reg);
+ rte_delay_ms(1);
+ }
+ otx2_sdp_dbg("SDP_R[%d]_credit:%x", oq_no,
+ rte_read32(droq->pkts_credit_reg));
+
+ /* Clear the OQ_OUT_CNTS doorbell */
+ reg_val = rte_read32(droq->pkts_sent_reg);
+ rte_write32((uint32_t)reg_val, droq->pkts_sent_reg);
+
+ otx2_sdp_dbg("SDP_R[%d]_sent: %x", oq_no,
+ rte_read32(droq->pkts_sent_reg));
+
+ while (((rte_read32(droq->pkts_sent_reg)) != 0ull)) {
+ reg_val = rte_read32(droq->pkts_sent_reg);
+ rte_write32((uint32_t)reg_val, droq->pkts_sent_reg);
+ rte_delay_ms(1);
+ }
+
+}
+
+static void
+sdp_vf_enable_iq(struct sdp_device *sdpvf, uint32_t q_no)
+{
+ volatile uint64_t reg_val = 0ull;
+ uint64_t loop = SDP_VF_BUSY_LOOP_COUNT;
+
+ /* Resetting doorbells during IQ enabling also to handle abrupt
+ * guest reboot. IQ reset does not clear the doorbells.
+ */
+ otx2_write64(0xFFFFFFFF, sdpvf->hw_addr +
+ SDP_VF_R_IN_INSTR_DBELL(q_no));
+
+ while (((otx2_read64(sdpvf->hw_addr +
+ SDP_VF_R_IN_INSTR_DBELL(q_no))) != 0ull) && loop--) {
+
+ rte_delay_ms(1);
+ }
+
+ reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_ENABLE(q_no));
+ reg_val |= 0x1ull;
+
+ otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_IN_ENABLE(q_no));
+
+ otx2_info("IQ[%d] enable done", q_no);
+
+}
+
+static void
+sdp_vf_enable_oq(struct sdp_device *sdpvf, uint32_t q_no)
+{
+ volatile uint64_t reg_val = 0ull;
+
+ reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_ENABLE(q_no));
+ reg_val |= 0x1ull;
+ otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_OUT_ENABLE(q_no));
+
+ otx2_info("OQ[%d] enable done", q_no);
+}
+
+static void
+sdp_vf_enable_io_queues(struct sdp_device *sdpvf)
+{
+ uint32_t q_no = 0;
+
+ for (q_no = 0; q_no < sdpvf->num_iqs; q_no++)
+ sdp_vf_enable_iq(sdpvf, q_no);
+
+ for (q_no = 0; q_no < sdpvf->num_oqs; q_no++)
+ sdp_vf_enable_oq(sdpvf, q_no);
+}
+
+int
+sdp_vf_setup_device(struct sdp_device *sdpvf)
+{
+ uint64_t reg_val = 0ull;
+
+ /* If application doesn't provide its conf, use driver default conf */
+ if (sdpvf->conf == NULL) {
+ sdpvf->conf = sdp_get_defconf(sdpvf);
+ if (sdpvf->conf == NULL) {
+ otx2_err("SDP VF default config not found");
+ return -ENOMEM;
+ }
+ otx2_info("Default config is used");
+ }
+
+ /* Get IOQs (RPVF] count */
+ reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CONTROL(0));
+
+ sdpvf->sriov_info.rings_per_vf = ((reg_val >> SDP_VF_R_IN_CTL_RPVF_POS)
+ & SDP_VF_R_IN_CTL_RPVF_MASK);
+
+ otx2_info("SDP RPVF: %d", sdpvf->sriov_info.rings_per_vf);
+
+ sdpvf->fn_list.setup_iq_regs = sdp_vf_setup_iq_regs;
+ sdpvf->fn_list.setup_oq_regs = sdp_vf_setup_oq_regs;
+ sdpvf->fn_list.setup_device_regs = sdp_vf_setup_device_regs;
+ sdpvf->fn_list.enable_io_queues = sdp_vf_enable_io_queues;
+ sdpvf->fn_list.enable_iq = sdp_vf_enable_iq;
+ sdpvf->fn_list.enable_oq = sdp_vf_enable_oq;
+
+
+ return 0;
+
+}
+
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_vf.h b/drivers/raw/octeontx2_ep/otx2_ep_vf.h
new file mode 100644
index 0000000..974f856
--- /dev/null
+++ b/drivers/raw/octeontx2_ep/otx2_ep_vf.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+#ifndef _OTX2_EP_VF_H_
+#define _OTX2_EP_VF_H_
+int
+sdp_vf_setup_device(struct sdp_device *sdpvf);
+
+#endif /*_OTX2_EP_VF_H_ */
+
--
1.8.3.1
^ permalink raw reply [flat|nested] 9+ messages in thread* [dpdk-dev] [PATCH v5 3/6] raw/octeontx2_ep: add device uninitialization
2020-01-13 6:00 [dpdk-dev] [PATCH v5 0/6] OCTEON TX2 End Point Driver Mahipal Challa
2020-01-13 6:00 ` [dpdk-dev] [PATCH v5 1/6] raw/octeontx2_ep: add build infra and device probe Mahipal Challa
2020-01-13 6:00 ` [dpdk-dev] [PATCH v5 2/6] raw/octeontx2_ep: add device configuration Mahipal Challa
@ 2020-01-13 6:00 ` Mahipal Challa
2020-01-13 6:00 ` [dpdk-dev] [PATCH v5 4/6] raw/octeontx2_ep: add enqueue operation Mahipal Challa
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Mahipal Challa @ 2020-01-13 6:00 UTC (permalink / raw)
To: dev, thomas; +Cc: Gavin.Hu, jerinj, pathreya, snilla, venkatn
Add rawdev close/uninitialize operation for SDP
VF devices.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
---
drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c | 111 ++++++++++++++++++++++++++++++
drivers/raw/octeontx2_ep/otx2_ep_rawdev.c | 78 +++++++++++++++++++++
drivers/raw/octeontx2_ep/otx2_ep_rawdev.h | 8 +++
drivers/raw/octeontx2_ep/otx2_ep_vf.c | 44 ++++++++++++
4 files changed, 241 insertions(+)
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
index 8857004..584b818 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
@@ -21,6 +21,59 @@
#include "otx2_common.h"
#include "otx2_ep_enqdeq.h"
+static void
+sdp_dmazone_free(const struct rte_memzone *mz)
+{
+ const struct rte_memzone *mz_tmp;
+ int ret = 0;
+
+ if (mz == NULL) {
+ otx2_err("Memzone %s : NULL", mz->name);
+ return;
+ }
+
+ mz_tmp = rte_memzone_lookup(mz->name);
+ if (mz_tmp == NULL) {
+ otx2_err("Memzone %s Not Found", mz->name);
+ return;
+ }
+
+ ret = rte_memzone_free(mz);
+ if (ret)
+ otx2_err("Memzone free failed : ret = %d", ret);
+
+}
+
+/* Free IQ resources */
+int
+sdp_delete_iqs(struct sdp_device *sdpvf, uint32_t iq_no)
+{
+ struct sdp_instr_queue *iq;
+
+ iq = sdpvf->instr_queue[iq_no];
+ if (iq == NULL) {
+ otx2_err("Invalid IQ[%d]\n", iq_no);
+ return -ENOMEM;
+ }
+
+ rte_free(iq->req_list);
+ iq->req_list = NULL;
+
+ if (iq->iq_mz) {
+ sdp_dmazone_free(iq->iq_mz);
+ iq->iq_mz = NULL;
+ }
+
+ rte_free(sdpvf->instr_queue[iq_no]);
+ sdpvf->instr_queue[iq_no] = NULL;
+
+ sdpvf->num_iqs--;
+
+ otx2_info("IQ[%d] is deleted", iq_no);
+
+ return 0;
+}
+
/* IQ initialization */
static int
sdp_init_instr_queue(struct sdp_device *sdpvf, int iq_no)
@@ -126,6 +179,7 @@
return 0;
delete_IQ:
+ sdp_delete_iqs(sdpvf, iq_no);
return -ENOMEM;
}
@@ -139,6 +193,61 @@
rte_atomic64_set(&droq->pkts_pending, 0);
}
+static void
+sdp_droq_destroy_ring_buffers(struct sdp_device *sdpvf,
+ struct sdp_droq *droq)
+{
+ uint32_t idx;
+
+ for (idx = 0; idx < droq->nb_desc; idx++) {
+ if (droq->recv_buf_list[idx].buffer) {
+ rte_mempool_put(sdpvf->enqdeq_mpool,
+ droq->recv_buf_list[idx].buffer);
+
+ droq->recv_buf_list[idx].buffer = NULL;
+ }
+ }
+
+ sdp_droq_reset_indices(droq);
+}
+
+/* Free OQs resources */
+int
+sdp_delete_oqs(struct sdp_device *sdpvf, uint32_t oq_no)
+{
+ struct sdp_droq *droq;
+
+ droq = sdpvf->droq[oq_no];
+ if (droq == NULL) {
+ otx2_err("Invalid droq[%d]", oq_no);
+ return -ENOMEM;
+ }
+
+ sdp_droq_destroy_ring_buffers(sdpvf, droq);
+ rte_free(droq->recv_buf_list);
+ droq->recv_buf_list = NULL;
+
+ if (droq->info_mz) {
+ sdp_dmazone_free(droq->info_mz);
+ droq->info_mz = NULL;
+ }
+
+ if (droq->desc_ring_mz) {
+ sdp_dmazone_free(droq->desc_ring_mz);
+ droq->desc_ring_mz = NULL;
+ }
+
+ memset(droq, 0, SDP_DROQ_SIZE);
+
+ rte_free(sdpvf->droq[oq_no]);
+ sdpvf->droq[oq_no] = NULL;
+
+ sdpvf->num_oqs--;
+
+ otx2_info("OQ[%d] is deleted", oq_no);
+ return 0;
+}
+
static int
sdp_droq_setup_ring_buffers(struct sdp_device *sdpvf,
struct sdp_droq *droq)
@@ -290,5 +399,7 @@
return 0;
delete_OQ:
+ sdp_delete_oqs(sdpvf, oq_no);
return -ENOMEM;
}
+
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
index 0c56609..3db5a74 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
@@ -63,6 +63,45 @@
}
static int
+sdp_vfdev_exit(struct rte_rawdev *rawdev)
+{
+ struct sdp_device *sdpvf;
+ uint32_t rawdev_queues, q;
+
+ otx2_info("%s:", __func__);
+
+ sdpvf = (struct sdp_device *)rawdev->dev_private;
+
+ sdpvf->fn_list.disable_io_queues(sdpvf);
+
+ rawdev_queues = sdpvf->num_oqs;
+ for (q = 0; q < rawdev_queues; q++) {
+ if (sdp_delete_oqs(sdpvf, q)) {
+ otx2_err("Failed to delete OQ:%d", q);
+ return -ENOMEM;
+ }
+ }
+ otx2_info("Num OQs:%d freed", sdpvf->num_oqs);
+
+ /* Free the oqbuf_pool */
+ rte_mempool_free(sdpvf->enqdeq_mpool);
+ sdpvf->enqdeq_mpool = NULL;
+
+ otx2_info("Enqdeq_mpool free done");
+
+ rawdev_queues = sdpvf->num_iqs;
+ for (q = 0; q < rawdev_queues; q++) {
+ if (sdp_delete_iqs(sdpvf, q)) {
+ otx2_err("Failed to delete IQ:%d", q);
+ return -ENOMEM;
+ }
+ }
+ otx2_sdp_dbg("Num IQs:%d freed", sdpvf->num_iqs);
+
+ return 0;
+}
+
+static int
sdp_chip_specific_setup(struct sdp_device *sdpvf)
{
struct rte_pci_device *pdev = sdpvf->pci_dev;
@@ -142,13 +181,49 @@
return 0;
+/* Error handling */
oq_fail:
+ /* Free the allocated OQs */
+ for (q = 0; q < sdpvf->num_oqs; q++)
+ sdp_delete_oqs(sdpvf, q);
+
iq_fail:
+ /* Free the allocated IQs */
+ for (q = 0; q < sdpvf->num_iqs; q++)
+ sdp_delete_iqs(sdpvf, q);
+
setup_fail:
return -ENOMEM;
}
static int
+sdp_rawdev_start(struct rte_rawdev *dev)
+{
+ dev->started = 1;
+
+ return 0;
+}
+
+static void
+sdp_rawdev_stop(struct rte_rawdev *dev)
+{
+ dev->started = 0;
+}
+
+static int
+sdp_rawdev_close(struct rte_rawdev *dev)
+{
+ int ret;
+ ret = sdp_vfdev_exit(dev);
+ if (ret) {
+ otx2_err(" SDP_EP rawdev exit error");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int
sdp_rawdev_configure(const struct rte_rawdev *dev, rte_rawdev_obj_t config)
{
struct sdp_rawdev_info *app_info = (struct sdp_rawdev_info *)config;
@@ -173,6 +248,9 @@
/* SDP VF endpoint rawdev ops */
static const struct rte_rawdev_ops sdp_rawdev_ops = {
.dev_configure = sdp_rawdev_configure,
+ .dev_start = sdp_rawdev_start,
+ .dev_stop = sdp_rawdev_stop,
+ .dev_close = sdp_rawdev_close,
};
static int
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
index bb36b6a..a01f48d 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
@@ -378,10 +378,16 @@ struct sdp_config {
struct sdp_fn_list {
void (*setup_iq_regs)(struct sdp_device *sdpvf, uint32_t q_no);
void (*setup_oq_regs)(struct sdp_device *sdpvf, uint32_t q_no);
+
int (*setup_device_regs)(struct sdp_device *sdpvf);
void (*enable_io_queues)(struct sdp_device *sdpvf);
+ void (*disable_io_queues)(struct sdp_device *sdpvf);
+
void (*enable_iq)(struct sdp_device *sdpvf, uint32_t q_no);
+ void (*disable_iq)(struct sdp_device *sdpvf, uint32_t q_no);
+
void (*enable_oq)(struct sdp_device *sdpvf, uint32_t q_no);
+ void (*disable_oq)(struct sdp_device *sdpvf, uint32_t q_no);
};
/* SRIOV information */
@@ -447,7 +453,9 @@ struct sdp_device {
const struct sdp_config *sdp_get_defconf(struct sdp_device *sdp_dev);
int sdp_setup_iqs(struct sdp_device *sdpvf, uint32_t iq_no);
+int sdp_delete_iqs(struct sdp_device *sdpvf, uint32_t iq_no);
int sdp_setup_oqs(struct sdp_device *sdpvf, uint32_t oq_no);
+int sdp_delete_oqs(struct sdp_device *sdpvf, uint32_t oq_no);
#endif /* _OTX2_EP_RAWDEV_H_ */
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_vf.c b/drivers/raw/octeontx2_ep/otx2_ep_vf.c
index b6120eb..8e79fe8 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_vf.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_vf.c
@@ -371,6 +371,44 @@
sdp_vf_enable_oq(sdpvf, q_no);
}
+static void
+sdp_vf_disable_iq(struct sdp_device *sdpvf, uint32_t q_no)
+{
+ volatile uint64_t reg_val = 0ull;
+
+ /* Reset the doorbell register for this Input Queue. */
+ reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_ENABLE(q_no));
+ reg_val &= ~0x1ull;
+
+ otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_IN_ENABLE(q_no));
+}
+
+static void
+sdp_vf_disable_oq(struct sdp_device *sdpvf, uint32_t q_no)
+{
+ volatile uint64_t reg_val = 0ull;
+
+ reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_ENABLE(q_no));
+ reg_val &= ~0x1ull;
+
+ otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_OUT_ENABLE(q_no));
+
+}
+
+static void
+sdp_vf_disable_io_queues(struct sdp_device *sdpvf)
+{
+ uint32_t q_no = 0;
+
+ /* Disable Input Queues. */
+ for (q_no = 0; q_no < sdpvf->num_iqs; q_no++)
+ sdp_vf_disable_iq(sdpvf, q_no);
+
+ /* Disable Output Queues. */
+ for (q_no = 0; q_no < sdpvf->num_oqs; q_no++)
+ sdp_vf_disable_oq(sdpvf, q_no);
+}
+
int
sdp_vf_setup_device(struct sdp_device *sdpvf)
{
@@ -396,10 +434,16 @@
sdpvf->fn_list.setup_iq_regs = sdp_vf_setup_iq_regs;
sdpvf->fn_list.setup_oq_regs = sdp_vf_setup_oq_regs;
+
sdpvf->fn_list.setup_device_regs = sdp_vf_setup_device_regs;
sdpvf->fn_list.enable_io_queues = sdp_vf_enable_io_queues;
+ sdpvf->fn_list.disable_io_queues = sdp_vf_disable_io_queues;
+
sdpvf->fn_list.enable_iq = sdp_vf_enable_iq;
+ sdpvf->fn_list.disable_iq = sdp_vf_disable_iq;
+
sdpvf->fn_list.enable_oq = sdp_vf_enable_oq;
+ sdpvf->fn_list.disable_oq = sdp_vf_disable_oq;
return 0;
--
1.8.3.1
^ permalink raw reply [flat|nested] 9+ messages in thread* [dpdk-dev] [PATCH v5 4/6] raw/octeontx2_ep: add enqueue operation
2020-01-13 6:00 [dpdk-dev] [PATCH v5 0/6] OCTEON TX2 End Point Driver Mahipal Challa
` (2 preceding siblings ...)
2020-01-13 6:00 ` [dpdk-dev] [PATCH v5 3/6] raw/octeontx2_ep: add device uninitialization Mahipal Challa
@ 2020-01-13 6:00 ` Mahipal Challa
2020-01-13 6:00 ` [dpdk-dev] [PATCH v5 5/6] raw/octeontx2_ep: add dequeue operation Mahipal Challa
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Mahipal Challa @ 2020-01-13 6:00 UTC (permalink / raw)
To: dev, thomas; +Cc: Gavin.Hu, jerinj, pathreya, snilla, venkatn
Add rawdev enqueue operation for SDP VF devices.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
---
doc/guides/rawdevs/octeontx2_ep.rst | 6 +
drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c | 242 ++++++++++++++++++++++++++++++
drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h | 39 +++++
drivers/raw/octeontx2_ep/otx2_ep_rawdev.c | 1 +
drivers/raw/octeontx2_ep/otx2_ep_rawdev.h | 20 +++
drivers/raw/octeontx2_ep/otx2_ep_vf.c | 24 +++
6 files changed, 332 insertions(+)
diff --git a/doc/guides/rawdevs/octeontx2_ep.rst b/doc/guides/rawdevs/octeontx2_ep.rst
index 2507fcf..39a7c29 100644
--- a/doc/guides/rawdevs/octeontx2_ep.rst
+++ b/doc/guides/rawdevs/octeontx2_ep.rst
@@ -68,3 +68,9 @@ The following code shows how the device is configured
rte_rawdev_configure(dev_id, (rte_rawdev_obj_t)&rdev_info);
+Performing Data Transfer
+------------------------
+
+To perform data transfer using SDP VF EP rawdev devices use standard
+``rte_rawdev_enqueue_buffers()`` and ``rte_rawdev_dequeue_buffers()`` APIs.
+
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
index 584b818..87ca3cd 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
@@ -403,3 +403,245 @@
return -ENOMEM;
}
+static inline void
+sdp_iqreq_delete(struct sdp_device *sdpvf,
+ struct sdp_instr_queue *iq, uint32_t idx)
+{
+ uint32_t reqtype;
+ void *buf;
+
+ buf = iq->req_list[idx].buf;
+ reqtype = iq->req_list[idx].reqtype;
+
+ switch (reqtype) {
+ case SDP_REQTYPE_NORESP:
+ rte_mempool_put(sdpvf->enqdeq_mpool, buf);
+ otx2_sdp_dbg("IQ buffer freed at idx[%d]", idx);
+ break;
+
+ case SDP_REQTYPE_NORESP_GATHER:
+ case SDP_REQTYPE_NONE:
+ default:
+ otx2_info("This iqreq mode is not supported:%d", reqtype);
+
+ }
+
+ /* Reset the request list at this index */
+ iq->req_list[idx].buf = NULL;
+ iq->req_list[idx].reqtype = 0;
+}
+
+static inline void
+sdp_iqreq_add(struct sdp_instr_queue *iq, void *buf,
+ uint32_t reqtype)
+{
+ iq->req_list[iq->host_write_index].buf = buf;
+ iq->req_list[iq->host_write_index].reqtype = reqtype;
+
+ otx2_sdp_dbg("IQ buffer added at idx[%d]", iq->host_write_index);
+
+}
+
+static void
+sdp_flush_iq(struct sdp_device *sdpvf,
+ struct sdp_instr_queue *iq,
+ uint32_t pending_thresh __rte_unused)
+{
+ uint32_t instr_processed = 0;
+
+ rte_spinlock_lock(&iq->lock);
+
+ iq->otx_read_index = sdpvf->fn_list.update_iq_read_idx(iq);
+ while (iq->flush_index != iq->otx_read_index) {
+ /* Free the IQ data buffer to the pool */
+ sdp_iqreq_delete(sdpvf, iq, iq->flush_index);
+ iq->flush_index =
+ sdp_incr_index(iq->flush_index, 1, iq->nb_desc);
+
+ instr_processed++;
+ }
+
+ iq->stats.instr_processed = instr_processed;
+ rte_atomic64_sub(&iq->instr_pending, instr_processed);
+
+ rte_spinlock_unlock(&iq->lock);
+}
+
+static inline void
+sdp_ring_doorbell(struct sdp_device *sdpvf __rte_unused,
+ struct sdp_instr_queue *iq)
+{
+ otx2_write64(iq->fill_cnt, iq->doorbell_reg);
+
+ /* Make sure doorbell writes observed by HW */
+ rte_cio_wmb();
+ iq->fill_cnt = 0;
+
+}
+
+static inline int
+post_iqcmd(struct sdp_instr_queue *iq, uint8_t *iqcmd)
+{
+ uint8_t *iqptr, cmdsize;
+
+ /* This ensures that the read index does not wrap around to
+ * the same position if queue gets full before OCTEON TX2 could
+ * fetch any instr.
+ */
+ if (rte_atomic64_read(&iq->instr_pending) >=
+ (int32_t)(iq->nb_desc - 1)) {
+ otx2_err("IQ is full, pending:%ld",
+ (long)rte_atomic64_read(&iq->instr_pending));
+
+ return SDP_IQ_SEND_FAILED;
+ }
+
+ /* Copy cmd into iq */
+ cmdsize = ((iq->iqcmd_64B) ? 64 : 32);
+ iqptr = iq->base_addr + (cmdsize * iq->host_write_index);
+
+ rte_memcpy(iqptr, iqcmd, cmdsize);
+
+ otx2_sdp_dbg("IQ cmd posted @ index:%d", iq->host_write_index);
+
+ /* Increment the host write index */
+ iq->host_write_index =
+ sdp_incr_index(iq->host_write_index, 1, iq->nb_desc);
+
+ iq->fill_cnt++;
+
+ /* Flush the command into memory. We need to be sure the data
+ * is in memory before indicating that the instruction is
+ * pending.
+ */
+ rte_smp_wmb();
+ rte_atomic64_inc(&iq->instr_pending);
+
+ /* SDP_IQ_SEND_SUCCESS */
+ return 0;
+}
+
+
+static int
+sdp_send_data(struct sdp_device *sdpvf,
+ struct sdp_instr_queue *iq, void *cmd)
+{
+ uint32_t ret;
+
+ /* Lock this IQ command queue before posting instruction */
+ rte_spinlock_lock(&iq->post_lock);
+
+ /* Submit IQ command */
+ ret = post_iqcmd(iq, cmd);
+
+ if (ret == SDP_IQ_SEND_SUCCESS) {
+ sdp_ring_doorbell(sdpvf, iq);
+
+ iq->stats.instr_posted++;
+ otx2_sdp_dbg("Instr submit success posted: %ld\n",
+ (long)iq->stats.instr_posted);
+
+ } else {
+ iq->stats.instr_dropped++;
+ otx2_err("Instr submit failled, dropped: %ld\n",
+ (long)iq->stats.instr_dropped);
+
+ }
+
+ rte_spinlock_unlock(&iq->post_lock);
+
+ return ret;
+}
+
+
+/* Enqueue requests/packets to SDP IQ queue.
+ * returns number of requests enqueued successfully
+ */
+int
+sdp_rawdev_enqueue(struct rte_rawdev *rawdev,
+ struct rte_rawdev_buf **buffers __rte_unused,
+ unsigned int count, rte_rawdev_obj_t context)
+{
+ struct sdp_instr_64B *iqcmd;
+ struct sdp_instr_queue *iq;
+ struct sdp_soft_instr *si;
+ struct sdp_device *sdpvf;
+
+ struct sdp_instr_ih ihx;
+
+ sdpvf = (struct sdp_device *)rawdev->dev_private;
+ si = (struct sdp_soft_instr *)context;
+
+ iq = sdpvf->instr_queue[si->q_no];
+
+ if ((count > 1) || (count < 1)) {
+ otx2_err("This mode not supported: req[%d]", count);
+ goto enq_fail;
+ }
+
+ memset(&ihx, 0, sizeof(struct sdp_instr_ih));
+
+ iqcmd = &si->command;
+ memset(iqcmd, 0, sizeof(struct sdp_instr_64B));
+
+ iqcmd->dptr = (uint64_t)si->dptr;
+
+ /* Populate SDP IH */
+ ihx.pkind = sdpvf->pkind;
+ ihx.fsz = si->ih.fsz + 8; /* 8B for NIX IH */
+ ihx.gather = si->ih.gather;
+
+ /* Direct data instruction */
+ ihx.tlen = si->ih.tlen + ihx.fsz;
+
+ switch (ihx.gather) {
+ case 0: /* Direct data instr */
+ ihx.tlen = si->ih.tlen + ihx.fsz;
+ break;
+
+ default: /* Gather */
+ switch (si->ih.gsz) {
+ case 0: /* Direct gather instr */
+ otx2_err("Direct Gather instr : not supported");
+ goto enq_fail;
+
+ default: /* Indirect gather instr */
+ otx2_err("Indirect Gather instr : not supported");
+ goto enq_fail;
+ }
+ }
+
+ rte_memcpy(&iqcmd->ih, &ihx, sizeof(uint64_t));
+ iqcmd->rptr = (uint64_t)si->rptr;
+ rte_memcpy(&iqcmd->irh, &si->irh, sizeof(uint64_t));
+
+ /* Swap FSZ(front data) here, to avoid swapping on OCTEON TX2 side */
+ sdp_swap_8B_data(&iqcmd->rptr, 1);
+ sdp_swap_8B_data(&iqcmd->irh, 1);
+
+ otx2_sdp_dbg("After swapping");
+ otx2_sdp_dbg("Word0 [dptr]: 0x%016lx", (unsigned long)iqcmd->dptr);
+ otx2_sdp_dbg("Word1 [ihtx]: 0x%016lx", (unsigned long)iqcmd->ih);
+ otx2_sdp_dbg("Word2 [rptr]: 0x%016lx", (unsigned long)iqcmd->rptr);
+ otx2_sdp_dbg("Word3 [irh]: 0x%016lx", (unsigned long)iqcmd->irh);
+ otx2_sdp_dbg("Word4 [exhdr[0]]: 0x%016lx",
+ (unsigned long)iqcmd->exhdr[0]);
+
+ sdp_iqreq_add(iq, si->dptr, si->reqtype);
+
+ if (sdp_send_data(sdpvf, iq, iqcmd)) {
+ otx2_err("Data send failled :");
+ sdp_iqreq_delete(sdpvf, iq, iq->host_write_index);
+ goto enq_fail;
+ }
+
+ if (rte_atomic64_read(&iq->instr_pending) >= 1)
+ sdp_flush_iq(sdpvf, iq, 1 /*(iq->nb_desc / 2)*/);
+
+ /* Return no# of instructions posted successfully. */
+ return count;
+
+enq_fail:
+ return SDP_IQ_SEND_FAILED;
+}
+
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
index 4c28283..b9b7c0b 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
+++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
@@ -8,4 +8,43 @@
#include <rte_byteorder.h>
#include "otx2_ep_rawdev.h"
+#define SDP_IQ_SEND_FAILED (-1)
+#define SDP_IQ_SEND_SUCCESS (0)
+
+
+static inline uint64_t
+sdp_endian_swap_8B(uint64_t _d)
+{
+ return ((((((uint64_t)(_d)) >> 0) & (uint64_t)0xff) << 56) |
+ (((((uint64_t)(_d)) >> 8) & (uint64_t)0xff) << 48) |
+ (((((uint64_t)(_d)) >> 16) & (uint64_t)0xff) << 40) |
+ (((((uint64_t)(_d)) >> 24) & (uint64_t)0xff) << 32) |
+ (((((uint64_t)(_d)) >> 32) & (uint64_t)0xff) << 24) |
+ (((((uint64_t)(_d)) >> 40) & (uint64_t)0xff) << 16) |
+ (((((uint64_t)(_d)) >> 48) & (uint64_t)0xff) << 8) |
+ (((((uint64_t)(_d)) >> 56) & (uint64_t)0xff) << 0));
+}
+
+static inline void
+sdp_swap_8B_data(uint64_t *data, uint32_t blocks)
+{
+ /* Swap 8B blocks */
+ while (blocks) {
+ *data = sdp_endian_swap_8B(*data);
+ blocks--;
+ data++;
+ }
+}
+
+static inline uint32_t
+sdp_incr_index(uint32_t index, uint32_t count, uint32_t max)
+{
+ if ((index + count) >= max)
+ index = index + count - max;
+ else
+ index += count;
+
+ return index;
+}
+
#endif /* _OTX2_EP_ENQDEQ_H_ */
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
index 3db5a74..22a6beb 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
@@ -251,6 +251,7 @@
.dev_start = sdp_rawdev_start,
.dev_stop = sdp_rawdev_stop,
.dev_close = sdp_rawdev_close,
+ .enqueue_bufs = sdp_rawdev_enqueue,
};
static int
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
index a01f48d..8fd06fb 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
@@ -8,6 +8,10 @@
#include <rte_byteorder.h>
#include <rte_spinlock.h>
+/* IQ instruction req types */
+#define SDP_REQTYPE_NONE (0)
+#define SDP_REQTYPE_NORESP (1)
+#define SDP_REQTYPE_NORESP_GATHER (2)
/* Input Request Header format */
struct sdp_instr_irh {
@@ -128,6 +132,13 @@ struct sdp_instr_list {
};
#define SDP_IQREQ_LIST_SIZE (sizeof(struct sdp_instr_list))
+/* Input Queue statistics. Each input queue has four stats fields. */
+struct sdp_iq_stats {
+ uint64_t instr_posted; /* Instructions posted to this queue. */
+ uint64_t instr_processed; /* Instructions processed in this queue. */
+ uint64_t instr_dropped; /* Instructions that could not be processed */
+};
+
/* Structure to define the configuration attributes for each Input queue. */
struct sdp_iq_config {
/* Max number of IQs available */
@@ -195,6 +206,9 @@ struct sdp_instr_queue {
/* Number of instructions pending to be posted to OCTEON TX2. */
uint32_t fill_cnt;
+ /* Statistics for this input queue. */
+ struct sdp_iq_stats stats;
+
/* DMA mapped base address of the input descriptor ring. */
uint64_t base_addr_dma;
@@ -380,6 +394,8 @@ struct sdp_fn_list {
void (*setup_oq_regs)(struct sdp_device *sdpvf, uint32_t q_no);
int (*setup_device_regs)(struct sdp_device *sdpvf);
+ uint32_t (*update_iq_read_idx)(struct sdp_instr_queue *iq);
+
void (*enable_io_queues)(struct sdp_device *sdpvf);
void (*disable_io_queues)(struct sdp_device *sdpvf);
@@ -458,4 +474,8 @@ struct sdp_device {
int sdp_setup_oqs(struct sdp_device *sdpvf, uint32_t oq_no);
int sdp_delete_oqs(struct sdp_device *sdpvf, uint32_t oq_no);
+int sdp_rawdev_enqueue(struct rte_rawdev *dev, struct rte_rawdev_buf **buffers,
+ unsigned int count, rte_rawdev_obj_t context);
+
+
#endif /* _OTX2_EP_RAWDEV_H_ */
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_vf.c b/drivers/raw/octeontx2_ep/otx2_ep_vf.c
index 8e79fe8..c5c0bc3 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_vf.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_vf.c
@@ -409,6 +409,28 @@
sdp_vf_disable_oq(sdpvf, q_no);
}
+static uint32_t
+sdp_vf_update_read_index(struct sdp_instr_queue *iq)
+{
+ uint32_t new_idx = rte_read32(iq->inst_cnt_reg);
+
+ /* The new instr cnt reg is a 32-bit counter that can roll over.
+ * We have noted the counter's initial value at init time into
+ * reset_instr_cnt
+ */
+ if (iq->reset_instr_cnt < new_idx)
+ new_idx -= iq->reset_instr_cnt;
+ else
+ new_idx += (0xffffffff - iq->reset_instr_cnt) + 1;
+
+ /* Modulo of the new index with the IQ size will give us
+ * the new index.
+ */
+ new_idx %= iq->nb_desc;
+
+ return new_idx;
+}
+
int
sdp_vf_setup_device(struct sdp_device *sdpvf)
{
@@ -436,6 +458,8 @@
sdpvf->fn_list.setup_oq_regs = sdp_vf_setup_oq_regs;
sdpvf->fn_list.setup_device_regs = sdp_vf_setup_device_regs;
+ sdpvf->fn_list.update_iq_read_idx = sdp_vf_update_read_index;
+
sdpvf->fn_list.enable_io_queues = sdp_vf_enable_io_queues;
sdpvf->fn_list.disable_io_queues = sdp_vf_disable_io_queues;
--
1.8.3.1
^ permalink raw reply [flat|nested] 9+ messages in thread* [dpdk-dev] [PATCH v5 5/6] raw/octeontx2_ep: add dequeue operation
2020-01-13 6:00 [dpdk-dev] [PATCH v5 0/6] OCTEON TX2 End Point Driver Mahipal Challa
` (3 preceding siblings ...)
2020-01-13 6:00 ` [dpdk-dev] [PATCH v5 4/6] raw/octeontx2_ep: add enqueue operation Mahipal Challa
@ 2020-01-13 6:00 ` Mahipal Challa
2020-01-13 6:00 ` [dpdk-dev] [PATCH v5 6/6] raw/octeontx2_ep: add driver self test Mahipal Challa
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Mahipal Challa @ 2020-01-13 6:00 UTC (permalink / raw)
To: dev, thomas; +Cc: Gavin.Hu, jerinj, pathreya, snilla, venkatn
Add rawdev dequeue operation for SDP VF devices.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
---
drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c | 197 ++++++++++++++++++++++++++++++
drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h | 2 +
drivers/raw/octeontx2_ep/otx2_ep_rawdev.c | 1 +
drivers/raw/octeontx2_ep/otx2_ep_rawdev.h | 18 ++-
4 files changed, 217 insertions(+), 1 deletion(-)
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
index 87ca3cd..b9287a5 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
@@ -260,6 +260,7 @@
rte_mempool_get(sdpvf->enqdeq_mpool, &buf);
if (buf == NULL) {
otx2_err("OQ buffer alloc failed");
+ droq->stats.rx_alloc_failure++;
/* sdp_droq_destroy_ring_buffers(droq);*/
return -ENOMEM;
}
@@ -645,3 +646,199 @@
return SDP_IQ_SEND_FAILED;
}
+static uint32_t
+sdp_droq_refill(struct sdp_device *sdpvf, struct sdp_droq *droq)
+{
+ struct sdp_droq_desc *desc_ring;
+ uint32_t desc_refilled = 0;
+ void *buf = NULL;
+
+ desc_ring = droq->desc_ring;
+
+ while (droq->refill_count && (desc_refilled < droq->nb_desc)) {
+ /* If a valid buffer exists (happens if there is no dispatch),
+ * reuse the buffer, else allocate.
+ */
+ if (droq->recv_buf_list[droq->refill_idx].buffer != NULL)
+ break;
+
+ rte_mempool_get(sdpvf->enqdeq_mpool, &buf);
+ /* If a buffer could not be allocated, no point in
+ * continuing
+ */
+ if (buf == NULL) {
+ droq->stats.rx_alloc_failure++;
+ break;
+ }
+
+ droq->recv_buf_list[droq->refill_idx].buffer = buf;
+ desc_ring[droq->refill_idx].buffer_ptr = rte_mem_virt2iova(buf);
+
+ /* Reset any previous values in the length field. */
+ droq->info_list[droq->refill_idx].length = 0;
+
+ droq->refill_idx = sdp_incr_index(droq->refill_idx, 1,
+ droq->nb_desc);
+
+ desc_refilled++;
+ droq->refill_count--;
+
+ }
+
+ return desc_refilled;
+}
+
+static int
+sdp_droq_read_packet(struct sdp_device *sdpvf __rte_unused,
+ struct sdp_droq *droq,
+ struct sdp_droq_pkt *droq_pkt)
+{
+ struct sdp_droq_info *info;
+ uint32_t total_len = 0;
+ uint32_t pkt_len = 0;
+
+ info = &droq->info_list[droq->read_idx];
+ sdp_swap_8B_data((uint64_t *)&info->length, 1);
+ if (!info->length) {
+ otx2_err("OQ info_list->length[%ld]", (long)info->length);
+ goto oq_read_fail;
+ }
+
+ /* Deduce the actual data size */
+ info->length -= SDP_RH_SIZE;
+ total_len += (uint32_t)info->length;
+
+ otx2_sdp_dbg("OQ: pkt_len[%ld], buffer_size %d",
+ (long)info->length, droq->buffer_size);
+ if (info->length > droq->buffer_size) {
+ otx2_err("This mode is not supported: pkt_len > buffer_size");
+ goto oq_read_fail;
+ }
+
+ if (info->length <= droq->buffer_size) {
+ pkt_len = (uint32_t)info->length;
+ droq_pkt->data = droq->recv_buf_list[droq->read_idx].buffer;
+ droq_pkt->len = pkt_len;
+
+ droq->recv_buf_list[droq->read_idx].buffer = NULL;
+ droq->read_idx = sdp_incr_index(droq->read_idx, 1,/* count */
+ droq->nb_desc /* max rd idx */);
+ droq->refill_count++;
+
+ }
+
+ info->length = 0;
+
+ return SDP_OQ_RECV_SUCCESS;
+
+oq_read_fail:
+ return SDP_OQ_RECV_FAILED;
+}
+
+static inline uint32_t
+sdp_check_droq_pkts(struct sdp_droq *droq, uint32_t burst_size)
+{
+ uint32_t min_pkts = 0;
+ uint32_t new_pkts;
+ uint32_t pkt_count;
+
+ /* Latest available OQ packets */
+ pkt_count = rte_read32(droq->pkts_sent_reg);
+
+ /* Newly arrived packets */
+ new_pkts = pkt_count - droq->last_pkt_count;
+ otx2_sdp_dbg("Recvd [%d] new OQ pkts", new_pkts);
+
+ min_pkts = (new_pkts > burst_size) ? burst_size : new_pkts;
+ if (min_pkts) {
+ rte_atomic64_add(&droq->pkts_pending, min_pkts);
+ /* Back up the aggregated packet count so far */
+ droq->last_pkt_count += min_pkts;
+ }
+
+ return min_pkts;
+}
+
+/* Check for response arrival from OCTEON TX2
+ * returns number of requests completed
+ */
+int
+sdp_rawdev_dequeue(struct rte_rawdev *rawdev,
+ struct rte_rawdev_buf **buffers, unsigned int count,
+ rte_rawdev_obj_t context __rte_unused)
+{
+ struct sdp_droq_pkt *oq_pkt;
+ struct sdp_device *sdpvf;
+ struct sdp_droq *droq;
+
+ uint32_t q_no = 0, pkts;
+ uint32_t new_pkts;
+ uint32_t ret;
+
+ sdpvf = (struct sdp_device *)rawdev->dev_private;
+
+ droq = sdpvf->droq[q_no];
+ if (!droq) {
+ otx2_err("Invalid droq[%d]", q_no);
+ goto deq_fail;
+ }
+
+ /* Grab the lock */
+ rte_spinlock_lock(&droq->lock);
+
+ new_pkts = sdp_check_droq_pkts(droq, count);
+ if (!new_pkts) {
+ otx2_sdp_dbg("Zero new_pkts:%d", new_pkts);
+ goto deq_fail; /* No pkts at this moment */
+ }
+
+ otx2_sdp_dbg("Received new_pkts = %d", new_pkts);
+
+ for (pkts = 0; pkts < new_pkts; pkts++) {
+
+ /* Push the received pkt to application */
+ oq_pkt = (struct sdp_droq_pkt *)buffers[pkts];
+
+ ret = sdp_droq_read_packet(sdpvf, droq, oq_pkt);
+ if (ret) {
+ otx2_err("DROQ read pakt failed.");
+ goto deq_fail;
+ }
+
+ /* Stats */
+ droq->stats.pkts_received++;
+ droq->stats.bytes_received += oq_pkt->len;
+ }
+
+ /* Ack the h/w with no# of pkts read by Host */
+ rte_write32(pkts, droq->pkts_sent_reg);
+ rte_cio_wmb();
+
+ droq->last_pkt_count -= pkts;
+
+ otx2_sdp_dbg("DROQ pkts[%d] pushed to application", pkts);
+
+ /* Refill DROQ buffers */
+ if (droq->refill_count >= 2 /* droq->refill_threshold */) {
+ int desc_refilled = sdp_droq_refill(sdpvf, droq);
+
+ /* Flush the droq descriptor data to memory to be sure
+ * that when we update the credits the data in memory is
+ * accurate.
+ */
+ rte_write32(desc_refilled, droq->pkts_credit_reg);
+
+ /* Ensure mmio write completes */
+ rte_wmb();
+ otx2_sdp_dbg("Refilled count = %d", desc_refilled);
+ }
+
+ /* Release the spin lock */
+ rte_spinlock_unlock(&droq->lock);
+
+ return pkts;
+
+deq_fail:
+ rte_spinlock_unlock(&droq->lock);
+ return SDP_OQ_RECV_FAILED;
+}
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
index b9b7c0b..172fdc5 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
+++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
@@ -11,6 +11,8 @@
#define SDP_IQ_SEND_FAILED (-1)
#define SDP_IQ_SEND_SUCCESS (0)
+#define SDP_OQ_RECV_FAILED (-1)
+#define SDP_OQ_RECV_SUCCESS (0)
static inline uint64_t
sdp_endian_swap_8B(uint64_t _d)
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
index 22a6beb..7158b97 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
@@ -252,6 +252,7 @@
.dev_stop = sdp_rawdev_stop,
.dev_close = sdp_rawdev_close,
.enqueue_bufs = sdp_rawdev_enqueue,
+ .dequeue_bufs = sdp_rawdev_dequeue,
};
static int
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
index 8fd06fb..a77cbab 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
@@ -279,6 +279,18 @@ struct sdp_recv_buffer {
};
#define SDP_DROQ_RECVBUF_SIZE (sizeof(struct sdp_recv_buffer))
+/* DROQ statistics. Each output queue has four stats fields. */
+struct sdp_droq_stats {
+ /* Number of packets received in this queue. */
+ uint64_t pkts_received;
+
+ /* Bytes received by this queue. */
+ uint64_t bytes_received;
+
+ /* Num of failures of rte_pktmbuf_alloc() */
+ uint64_t rx_alloc_failure;
+};
+
/* Structure to define the configuration attributes for each Output queue. */
struct sdp_oq_config {
/* Max number of OQs available */
@@ -345,6 +357,9 @@ struct sdp_droq {
*/
void *pkts_sent_reg;
+ /* Statistics for this DROQ. */
+ struct sdp_droq_stats stats;
+
/* DMA mapped address of the DROQ descriptor ring. */
size_t desc_ring_dma;
@@ -476,6 +491,7 @@ struct sdp_device {
int sdp_rawdev_enqueue(struct rte_rawdev *dev, struct rte_rawdev_buf **buffers,
unsigned int count, rte_rawdev_obj_t context);
-
+int sdp_rawdev_dequeue(struct rte_rawdev *dev, struct rte_rawdev_buf **buffers,
+ unsigned int count, rte_rawdev_obj_t context);
#endif /* _OTX2_EP_RAWDEV_H_ */
--
1.8.3.1
^ permalink raw reply [flat|nested] 9+ messages in thread* [dpdk-dev] [PATCH v5 6/6] raw/octeontx2_ep: add driver self test
2020-01-13 6:00 [dpdk-dev] [PATCH v5 0/6] OCTEON TX2 End Point Driver Mahipal Challa
` (4 preceding siblings ...)
2020-01-13 6:00 ` [dpdk-dev] [PATCH v5 5/6] raw/octeontx2_ep: add dequeue operation Mahipal Challa
@ 2020-01-13 6:00 ` Mahipal Challa
2020-01-14 3:39 ` [dpdk-dev] [PATCH v5 0/6] OCTEON TX2 End Point Driver Mahipal Challa
2020-01-20 8:44 ` Thomas Monjalon
7 siblings, 0 replies; 9+ messages in thread
From: Mahipal Challa @ 2020-01-13 6:00 UTC (permalink / raw)
To: dev, thomas; +Cc: Gavin.Hu, jerinj, pathreya, snilla, venkatn
Add rawdev's selftest feature in SDP VF driver, which
verifies the EP mode functionality test.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
---
doc/guides/rawdevs/octeontx2_ep.rst | 13 +++
drivers/raw/octeontx2_ep/Makefile | 1 +
drivers/raw/octeontx2_ep/meson.build | 1 +
drivers/raw/octeontx2_ep/otx2_ep_rawdev.c | 1 +
drivers/raw/octeontx2_ep/otx2_ep_rawdev.h | 2 +
drivers/raw/octeontx2_ep/otx2_ep_test.c | 173 ++++++++++++++++++++++++++++++
6 files changed, 191 insertions(+)
diff --git a/doc/guides/rawdevs/octeontx2_ep.rst b/doc/guides/rawdevs/octeontx2_ep.rst
index 39a7c29..bbcf530 100644
--- a/doc/guides/rawdevs/octeontx2_ep.rst
+++ b/doc/guides/rawdevs/octeontx2_ep.rst
@@ -74,3 +74,16 @@ Performing Data Transfer
To perform data transfer using SDP VF EP rawdev devices use standard
``rte_rawdev_enqueue_buffers()`` and ``rte_rawdev_dequeue_buffers()`` APIs.
+Self test
+---------
+
+On EAL initialization, SDP VF devices will be probed and populated into the
+raw devices. The rawdev ID of the device can be obtained using
+
+* Invoke ``rte_rawdev_get_dev_id("SDPEP:x")`` from the test application
+ where x is the VF device's bus id specified in "bus:device.func"(BDF)
+ format. Use this index for further rawdev function calls.
+
+* The driver's selftest rawdev API can be used to verify the SDP EP mode
+ functional tests which can send/receive the raw data packets to/from the
+ EP device.
diff --git a/drivers/raw/octeontx2_ep/Makefile b/drivers/raw/octeontx2_ep/Makefile
index 02853fb..44fdf89 100644
--- a/drivers/raw/octeontx2_ep/Makefile
+++ b/drivers/raw/octeontx2_ep/Makefile
@@ -37,6 +37,7 @@ LIBABIVER := 1
#
SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_rawdev.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_enqdeq.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_test.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_vf.c
diff --git a/drivers/raw/octeontx2_ep/meson.build b/drivers/raw/octeontx2_ep/meson.build
index 99e6c6d..0e6338f 100644
--- a/drivers/raw/octeontx2_ep/meson.build
+++ b/drivers/raw/octeontx2_ep/meson.build
@@ -5,4 +5,5 @@
deps += ['bus_pci', 'common_octeontx2', 'rawdev']
sources = files('otx2_ep_rawdev.c',
'otx2_ep_enqdeq.c',
+ 'otx2_ep_test.c',
'otx2_ep_vf.c')
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
index 7158b97..0778603 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
@@ -253,6 +253,7 @@
.dev_close = sdp_rawdev_close,
.enqueue_bufs = sdp_rawdev_enqueue,
.dequeue_bufs = sdp_rawdev_dequeue,
+ .dev_selftest = sdp_rawdev_selftest,
};
static int
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
index a77cbab..dab2fb7 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
@@ -494,4 +494,6 @@ int sdp_rawdev_enqueue(struct rte_rawdev *dev, struct rte_rawdev_buf **buffers,
int sdp_rawdev_dequeue(struct rte_rawdev *dev, struct rte_rawdev_buf **buffers,
unsigned int count, rte_rawdev_obj_t context);
+int sdp_rawdev_selftest(uint16_t dev_id);
+
#endif /* _OTX2_EP_RAWDEV_H_ */
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_test.c b/drivers/raw/octeontx2_ep/otx2_ep_test.c
new file mode 100644
index 0000000..9746840
--- /dev/null
+++ b/drivers/raw/octeontx2_ep/otx2_ep_test.c
@@ -0,0 +1,173 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <rte_common.h>
+#include <rte_eal.h>
+#include <rte_lcore.h>
+#include <rte_mempool.h>
+
+#include <rte_rawdev.h>
+#include <rte_rawdev_pmd.h>
+
+#include "otx2_common.h"
+#include "otx2_ep_rawdev.h"
+
+#define SDP_IOQ_NUM_BUFS (4 * 1024)
+#define SDP_IOQ_BUF_SIZE (2 * 1024)
+
+#define SDP_TEST_PKT_FSZ (0)
+#define SDP_TEST_PKT_SIZE (1024)
+
+static int
+sdp_validate_data(struct sdp_droq_pkt *oq_pkt, uint8_t *iq_pkt,
+ uint32_t pkt_len)
+{
+ if (!oq_pkt)
+ return -EINVAL;
+
+ if (pkt_len != oq_pkt->len) {
+ otx2_err("Invalid packet length");
+ return -EINVAL;
+ }
+
+ if (memcmp(oq_pkt->data, iq_pkt, pkt_len) != 0) {
+ otx2_err("Data validation failed");
+ return -EINVAL;
+ }
+ otx2_sdp_dbg("Data validation successful");
+
+ return 0;
+}
+
+static void
+sdp_ioq_buffer_fill(uint8_t *addr, uint32_t len)
+{
+ uint32_t idx;
+
+ memset(addr, 0, len);
+
+ for (idx = 0; idx < len; idx++)
+ addr[idx] = idx;
+}
+
+static struct rte_mempool*
+sdp_ioq_mempool_create(void)
+{
+ struct rte_mempool *mpool;
+
+ mpool = rte_mempool_create("ioqbuf_pool",
+ SDP_IOQ_NUM_BUFS /*num elt*/,
+ SDP_IOQ_BUF_SIZE /*elt size*/,
+ 0 /*cache_size*/,
+ 0 /*private_data_size*/,
+ NULL /*mp_init*/,
+ NULL /*mp_init arg*/,
+ NULL /*obj_init*/,
+ NULL /*obj_init arg*/,
+ rte_socket_id() /*socket id*/,
+ (MEMPOOL_F_SP_PUT | MEMPOOL_F_SC_GET));
+
+ return mpool;
+}
+
+
+int
+sdp_rawdev_selftest(uint16_t dev_id)
+{
+ struct sdp_rawdev_info app_info = {0};
+ struct rte_rawdev_info dev_info = {0};
+
+ struct rte_rawdev_buf *d_buf[1];
+ struct sdp_droq_pkt oq_pkt;
+ struct sdp_soft_instr si;
+ struct sdp_device sdpvf;
+
+ uint32_t buf_size;
+ int ret = 0;
+ void *buf;
+
+ otx2_info("SDP RAWDEV Self Test: Started");
+
+ memset(&oq_pkt, 0x00, sizeof(oq_pkt));
+ d_buf[0] = (struct rte_rawdev_buf *)&oq_pkt;
+
+ struct rte_mempool *ioq_mpool = sdp_ioq_mempool_create();
+ if (!ioq_mpool) {
+ otx2_err("IOQ mpool creation failed");
+ return -ENOMEM;
+ }
+
+ app_info.enqdeq_mpool = ioq_mpool;
+ app_info.app_conf = NULL; /* Use default conf */
+
+ dev_info.dev_private = &app_info;
+
+ ret = rte_rawdev_configure(dev_id, &dev_info);
+ if (ret) {
+ otx2_err("Unable to configure SDP_VF %d", dev_id);
+ rte_mempool_free(ioq_mpool);
+ return -ENOMEM;
+ }
+ otx2_info("SDP VF rawdev[%d] configured successfully", dev_id);
+
+ memset(&si, 0x00, sizeof(si));
+ memset(&sdpvf, 0x00, sizeof(sdpvf));
+
+ buf_size = SDP_TEST_PKT_SIZE;
+
+ si.q_no = 0;
+ si.reqtype = SDP_REQTYPE_NORESP;
+ si.rptr = NULL;
+
+ si.ih.fsz = SDP_TEST_PKT_FSZ;
+ si.ih.tlen = buf_size;
+ si.ih.gather = 0;
+
+ /* Enqueue raw pkt data */
+ rte_mempool_get(ioq_mpool, &buf);
+ if (!buf) {
+ otx2_err("Buffer allocation failed");
+ rte_mempool_free(ioq_mpool);
+ rte_rawdev_close(dev_id);
+ return -ENOMEM;
+ }
+
+ sdp_ioq_buffer_fill(buf, buf_size);
+ si.dptr = (uint8_t *)buf;
+
+ rte_rawdev_enqueue_buffers(dev_id, NULL, 1, &si);
+ usleep(10000);
+
+ /* Dequeue raw pkt data */
+ ret = 0;
+ while (ret < 1) {
+ ret = rte_rawdev_dequeue_buffers(dev_id, &d_buf[0], 1, &si);
+ rte_pause();
+ }
+
+ /* Validate the dequeued raw pkt data */
+ if (sdp_validate_data((struct sdp_droq_pkt *)d_buf[0],
+ buf, buf_size) != 0) {
+ otx2_err("Data invalid");
+ rte_mempool_put(ioq_mpool,
+ ((struct sdp_droq_pkt *)d_buf[0])->data);
+ rte_mempool_free(ioq_mpool);
+ rte_rawdev_close(dev_id);
+ return -EINVAL;
+ }
+
+ rte_mempool_put(ioq_mpool, ((struct sdp_droq_pkt *)d_buf[0])->data);
+ rte_mempool_free(ioq_mpool);
+ rte_rawdev_close(dev_id);
+
+ otx2_info("SDP RAWDEV Self Test: Successful");
+
+ return 0;
+}
+
--
1.8.3.1
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [dpdk-dev] [PATCH v5 0/6] OCTEON TX2 End Point Driver
2020-01-13 6:00 [dpdk-dev] [PATCH v5 0/6] OCTEON TX2 End Point Driver Mahipal Challa
` (5 preceding siblings ...)
2020-01-13 6:00 ` [dpdk-dev] [PATCH v5 6/6] raw/octeontx2_ep: add driver self test Mahipal Challa
@ 2020-01-14 3:39 ` Mahipal Challa
2020-01-20 8:44 ` Thomas Monjalon
7 siblings, 0 replies; 9+ messages in thread
From: Mahipal Challa @ 2020-01-14 3:39 UTC (permalink / raw)
To: dev, thomas
Cc: Gavin.Hu, Jerin Jacob Kollanukkaran,
Narayana Prasad Raju Athreya, Subrahmanyam Nilla,
Venkateshwarlu Nalla
Hi Thomas,
Would you please merge this series.
Thanks,
Mahipal
> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Mahipal Challa
> Sent: Monday, January 13, 2020 11:31 AM
> To: dev@dpdk.org; thomas@monjalon.net
> Cc: Gavin.Hu@arm.com; Jerin Jacob Kollanukkaran <jerinj@marvell.com>;
> Narayana Prasad Raju Athreya <pathreya@marvell.com>; Subrahmanyam
> Nilla <snilla@marvell.com>; Venkateshwarlu Nalla <venkatn@marvell.com>
> Subject: [dpdk-dev] [PATCH v5 0/6] OCTEON TX2 End Point Driver
>
> This patchset adds support for OCTEON TX2 end point mode of operation.
> The driver implementation uses DPDK rawdevice sub-system.
>
> v2:
> * Updated memory barrier API's as per Gavin Hu suggestion.
>
> v3:
> * Fixed memory leak possibility issues.
>
> v4:
> * Improved error handling in selftest API.
>
> v5:
> * Updated "doc/guides/rel_notes/release_20_02.rst".
>
> Series-reviewed-by: Gavin Hu <gavin.hu@arm.com>
>
> Mahipal Challa (6):
> raw/octeontx2_ep: add build infra and device probe
> raw/octeontx2_ep: add device configuration
> raw/octeontx2_ep: add device uninitialization
> raw/octeontx2_ep: add enqueue operation
> raw/octeontx2_ep: add dequeue operation
> raw/octeontx2_ep: add driver self test
>
> MAINTAINERS | 5 +
> config/common_base | 5 +
> doc/guides/rawdevs/index.rst | 1 +
> doc/guides/rawdevs/octeontx2_ep.rst | 89 +++
> doc/guides/rel_notes/release_20_02.rst | 4 +
> drivers/common/octeontx2/hw/otx2_sdp.h | 184 +++++
> drivers/common/octeontx2/otx2_common.c | 9 +
> drivers/common/octeontx2/otx2_common.h | 4 +
> .../octeontx2/rte_common_octeontx2_version.map | 6 +
> drivers/raw/Makefile | 1 +
> drivers/raw/meson.build | 1 +
> drivers/raw/octeontx2_ep/Makefile | 44 ++
> drivers/raw/octeontx2_ep/meson.build | 9 +
> drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c | 844
> +++++++++++++++++++++
> drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h | 52 ++
> drivers/raw/octeontx2_ep/otx2_ep_rawdev.c | 361 +++++++++
> drivers/raw/octeontx2_ep/otx2_ep_rawdev.h | 499 ++++++++++++
> drivers/raw/octeontx2_ep/otx2_ep_test.c | 173 +++++
> drivers/raw/octeontx2_ep/otx2_ep_vf.c | 476 ++++++++++++
> drivers/raw/octeontx2_ep/otx2_ep_vf.h | 10 +
> .../rte_rawdev_octeontx2_ep_version.map | 4 +
> mk/rte.app.mk | 2 +
> 22 files changed, 2783 insertions(+)
> create mode 100644 doc/guides/rawdevs/octeontx2_ep.rst
> create mode 100644 drivers/common/octeontx2/hw/otx2_sdp.h
> create mode 100644 drivers/raw/octeontx2_ep/Makefile create mode
> 100644 drivers/raw/octeontx2_ep/meson.build
> create mode 100644 drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
> create mode 100644 drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
> create mode 100644 drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
> create mode 100644 drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
> create mode 100644 drivers/raw/octeontx2_ep/otx2_ep_test.c
> create mode 100644 drivers/raw/octeontx2_ep/otx2_ep_vf.c
> create mode 100644 drivers/raw/octeontx2_ep/otx2_ep_vf.h
> create mode 100644
> drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map
>
> --
> 1.8.3.1
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [dpdk-dev] [PATCH v5 0/6] OCTEON TX2 End Point Driver
2020-01-13 6:00 [dpdk-dev] [PATCH v5 0/6] OCTEON TX2 End Point Driver Mahipal Challa
` (6 preceding siblings ...)
2020-01-14 3:39 ` [dpdk-dev] [PATCH v5 0/6] OCTEON TX2 End Point Driver Mahipal Challa
@ 2020-01-20 8:44 ` Thomas Monjalon
7 siblings, 0 replies; 9+ messages in thread
From: Thomas Monjalon @ 2020-01-20 8:44 UTC (permalink / raw)
To: Mahipal Challa; +Cc: dev, Gavin.Hu, jerinj, pathreya, snilla, venkatn
13/01/2020 07:00, Mahipal Challa:
> This patchset adds support for OCTEON TX2 end point mode of operation.
> The driver implementation uses DPDK rawdevice sub-system.
>
> v2:
> * Updated memory barrier API's as per Gavin Hu suggestion.
>
> v3:
> * Fixed memory leak possibility issues.
>
> v4:
> * Improved error handling in selftest API.
>
> v5:
> * Updated "doc/guides/rel_notes/release_20_02.rst".
Next time, please make all versions in the same mail thread using --in-reply-to.
> Series-reviewed-by: Gavin Hu <gavin.hu@arm.com>
This should be added in each patch:
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
> Mahipal Challa (6):
> raw/octeontx2_ep: add build infra and device probe
> raw/octeontx2_ep: add device configuration
> raw/octeontx2_ep: add device uninitialization
> raw/octeontx2_ep: add enqueue operation
> raw/octeontx2_ep: add dequeue operation
> raw/octeontx2_ep: add driver self test
Applied, thanks
Note: removed some blank lines at end of files.
^ permalink raw reply [flat|nested] 9+ messages in thread