From: Matan Azrad <matan@mellanox.com>
To: dev@dpdk.org, Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Cc: Raslan Darawsheh <rasland@mellanox.com>
Subject: [dpdk-dev] [PATCH v4 01/25] net/mlx5: separate DevX commands interface
Date: Wed, 29 Jan 2020 12:38:26 +0000 [thread overview]
Message-ID: <1580301530-6643-2-git-send-email-matan@mellanox.com> (raw)
In-Reply-To: <1580301530-6643-1-git-send-email-matan@mellanox.com>
The DevX commands interface is included in the mlx5.h file with a lot
of other PMD interfaces.
As an arrangement to make the DevX commands shared with different PMDs,
this patch moves the DevX interface to a new file called mlx5_devx_cmds.h.
Also remove shared device structure dependency on DevX commands.
Replace the DevX commands log mechanism from the mlx5 driver log
mechanism to the EAL log mechanism.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
---
drivers/net/mlx5/mlx5.c | 1 +
drivers/net/mlx5/mlx5.h | 221 +-----------------------------------
drivers/net/mlx5/mlx5_devx_cmds.c | 33 +++---
drivers/net/mlx5/mlx5_devx_cmds.h | 231 ++++++++++++++++++++++++++++++++++++++
drivers/net/mlx5/mlx5_ethdev.c | 1 +
drivers/net/mlx5/mlx5_flow.c | 5 +-
drivers/net/mlx5/mlx5_flow_dv.c | 1 +
drivers/net/mlx5/mlx5_rxq.c | 1 +
drivers/net/mlx5/mlx5_rxtx.c | 1 +
drivers/net/mlx5/mlx5_txq.c | 1 +
drivers/net/mlx5/mlx5_vlan.c | 1 +
11 files changed, 263 insertions(+), 234 deletions(-)
create mode 100644 drivers/net/mlx5/mlx5_devx_cmds.h
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 2049370..7126edf 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -46,6 +46,7 @@
#include "mlx5_glue.h"
#include "mlx5_mr.h"
#include "mlx5_flow.h"
+#include "mlx5_devx_cmds.h"
/* Device parameter to enable RX completion queue compression. */
#define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 5818349..4d0485d 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -38,6 +38,7 @@
#include "mlx5_defs.h"
#include "mlx5_glue.h"
#include "mlx5_prm.h"
+#include "mlx5_devx_cmds.h"
enum {
PCI_VENDOR_ID_MELLANOX = 0x15b3,
@@ -156,62 +157,6 @@ struct mlx5_stats_ctrl {
uint64_t imissed_base;
};
-/* devX creation object */
-struct mlx5_devx_obj {
- struct mlx5dv_devx_obj *obj; /* The DV object. */
- int id; /* The object ID. */
-};
-
-struct mlx5_devx_mkey_attr {
- uint64_t addr;
- uint64_t size;
- uint32_t umem_id;
- uint32_t pd;
-};
-
-/* HCA qos attributes. */
-struct mlx5_hca_qos_attr {
- uint32_t sup:1; /* Whether QOS is supported. */
- uint32_t srtcm_sup:1; /* Whether srTCM mode is supported. */
- uint32_t flow_meter_reg_share:1;
- /* Whether reg_c share is supported. */
- uint8_t log_max_flow_meter;
- /* Power of the maximum supported meters. */
- uint8_t flow_meter_reg_c_ids;
- /* Bitmap of the reg_Cs available for flow meter to use. */
-
-};
-
-/* HCA supports this number of time periods for LRO. */
-#define MLX5_LRO_NUM_SUPP_PERIODS 4
-
-/* HCA attributes. */
-struct mlx5_hca_attr {
- uint32_t eswitch_manager:1;
- uint32_t flow_counters_dump:1;
- uint8_t flow_counter_bulk_alloc_bitmap;
- uint32_t eth_net_offloads:1;
- uint32_t eth_virt:1;
- uint32_t wqe_vlan_insert:1;
- uint32_t wqe_inline_mode:2;
- uint32_t vport_inline_mode:3;
- uint32_t tunnel_stateless_geneve_rx:1;
- uint32_t geneve_max_opt_len:1; /* 0x0: 14DW, 0x1: 63DW */
- uint32_t tunnel_stateless_gtp:1;
- uint32_t lro_cap:1;
- uint32_t tunnel_lro_gre:1;
- uint32_t tunnel_lro_vxlan:1;
- uint32_t lro_max_msg_sz_mode:2;
- uint32_t lro_timer_supported_periods[MLX5_LRO_NUM_SUPP_PERIODS];
- uint32_t flex_parser_protocols;
- uint32_t hairpin:1;
- uint32_t log_max_hairpin_queues:5;
- uint32_t log_max_hairpin_wq_data_sz:5;
- uint32_t log_max_hairpin_num_packets:5;
- uint32_t vhca_id:16;
- struct mlx5_hca_qos_attr qos;
-};
-
/* Flow list . */
TAILQ_HEAD(mlx5_flows, rte_flow);
@@ -291,133 +236,6 @@ struct mlx5_dev_config {
struct mlx5_lro_config lro; /* LRO configuration. */
};
-struct mlx5_devx_wq_attr {
- uint32_t wq_type:4;
- uint32_t wq_signature:1;
- uint32_t end_padding_mode:2;
- uint32_t cd_slave:1;
- uint32_t hds_skip_first_sge:1;
- uint32_t log2_hds_buf_size:3;
- uint32_t page_offset:5;
- uint32_t lwm:16;
- uint32_t pd:24;
- uint32_t uar_page:24;
- uint64_t dbr_addr;
- uint32_t hw_counter;
- uint32_t sw_counter;
- uint32_t log_wq_stride:4;
- uint32_t log_wq_pg_sz:5;
- uint32_t log_wq_sz:5;
- uint32_t dbr_umem_valid:1;
- uint32_t wq_umem_valid:1;
- uint32_t log_hairpin_num_packets:5;
- uint32_t log_hairpin_data_sz:5;
- uint32_t single_wqe_log_num_of_strides:4;
- uint32_t two_byte_shift_en:1;
- uint32_t single_stride_log_num_of_bytes:3;
- uint32_t dbr_umem_id;
- uint32_t wq_umem_id;
- uint64_t wq_umem_offset;
-};
-
-/* Create RQ attributes structure, used by create RQ operation. */
-struct mlx5_devx_create_rq_attr {
- uint32_t rlky:1;
- uint32_t delay_drop_en:1;
- uint32_t scatter_fcs:1;
- uint32_t vsd:1;
- uint32_t mem_rq_type:4;
- uint32_t state:4;
- uint32_t flush_in_error_en:1;
- uint32_t hairpin:1;
- uint32_t user_index:24;
- uint32_t cqn:24;
- uint32_t counter_set_id:8;
- uint32_t rmpn:24;
- struct mlx5_devx_wq_attr wq_attr;
-};
-
-/* Modify RQ attributes structure, used by modify RQ operation. */
-struct mlx5_devx_modify_rq_attr {
- uint32_t rqn:24;
- uint32_t rq_state:4; /* Current RQ state. */
- uint32_t state:4; /* Required RQ state. */
- uint32_t scatter_fcs:1;
- uint32_t vsd:1;
- uint32_t counter_set_id:8;
- uint32_t hairpin_peer_sq:24;
- uint32_t hairpin_peer_vhca:16;
- uint64_t modify_bitmask;
- uint32_t lwm:16; /* Contained WQ lwm. */
-};
-
-struct mlx5_rx_hash_field_select {
- uint32_t l3_prot_type:1;
- uint32_t l4_prot_type:1;
- uint32_t selected_fields:30;
-};
-
-/* TIR attributes structure, used by TIR operations. */
-struct mlx5_devx_tir_attr {
- uint32_t disp_type:4;
- uint32_t lro_timeout_period_usecs:16;
- uint32_t lro_enable_mask:4;
- uint32_t lro_max_msg_sz:8;
- uint32_t inline_rqn:24;
- uint32_t rx_hash_symmetric:1;
- uint32_t tunneled_offload_en:1;
- uint32_t indirect_table:24;
- uint32_t rx_hash_fn:4;
- uint32_t self_lb_block:2;
- uint32_t transport_domain:24;
- uint32_t rx_hash_toeplitz_key[10];
- struct mlx5_rx_hash_field_select rx_hash_field_selector_outer;
- struct mlx5_rx_hash_field_select rx_hash_field_selector_inner;
-};
-
-/* RQT attributes structure, used by RQT operations. */
-struct mlx5_devx_rqt_attr {
- uint32_t rqt_max_size:16;
- uint32_t rqt_actual_size:16;
- uint32_t rq_list[];
-};
-
-/* TIS attributes structure. */
-struct mlx5_devx_tis_attr {
- uint32_t strict_lag_tx_port_affinity:1;
- uint32_t tls_en:1;
- uint32_t lag_tx_port_affinity:4;
- uint32_t prio:4;
- uint32_t transport_domain:24;
-};
-
-/* SQ attributes structure, used by SQ create operation. */
-struct mlx5_devx_create_sq_attr {
- uint32_t rlky:1;
- uint32_t cd_master:1;
- uint32_t fre:1;
- uint32_t flush_in_error_en:1;
- uint32_t allow_multi_pkt_send_wqe:1;
- uint32_t min_wqe_inline_mode:3;
- uint32_t state:4;
- uint32_t reg_umr:1;
- uint32_t allow_swp:1;
- uint32_t hairpin:1;
- uint32_t user_index:24;
- uint32_t cqn:24;
- uint32_t packet_pacing_rate_limit_index:16;
- uint32_t tis_lst_sz:16;
- uint32_t tis_num:24;
- struct mlx5_devx_wq_attr wq_attr;
-};
-
-/* SQ attributes structure, used by SQ modify operation. */
-struct mlx5_devx_modify_sq_attr {
- uint32_t sq_state:4;
- uint32_t state:4;
- uint32_t hairpin_peer_rq:24;
- uint32_t hairpin_peer_vhca:16;
-};
/**
* Type of object being allocated.
@@ -1026,43 +844,6 @@ void mlx5_vlan_vmwa_release(struct rte_eth_dev *dev,
void mlx5_vlan_vmwa_acquire(struct rte_eth_dev *dev,
struct mlx5_vf_vlan *vf_vlan);
-/* mlx5_devx_cmds.c */
-
-struct mlx5_devx_obj *mlx5_devx_cmd_flow_counter_alloc(struct ibv_context *ctx,
- uint32_t bulk_sz);
-int mlx5_devx_cmd_destroy(struct mlx5_devx_obj *obj);
-int mlx5_devx_cmd_flow_counter_query(struct mlx5_devx_obj *dcs,
- int clear, uint32_t n_counters,
- uint64_t *pkts, uint64_t *bytes,
- uint32_t mkey, void *addr,
- struct mlx5dv_devx_cmd_comp *cmd_comp,
- uint64_t async_id);
-int mlx5_devx_cmd_query_hca_attr(struct ibv_context *ctx,
- struct mlx5_hca_attr *attr);
-struct mlx5_devx_obj *mlx5_devx_cmd_mkey_create(struct ibv_context *ctx,
- struct mlx5_devx_mkey_attr *attr);
-int mlx5_devx_get_out_command_status(void *out);
-int mlx5_devx_cmd_qp_query_tis_td(struct ibv_qp *qp, uint32_t tis_num,
- uint32_t *tis_td);
-struct mlx5_devx_obj *mlx5_devx_cmd_create_rq(struct ibv_context *ctx,
- struct mlx5_devx_create_rq_attr *rq_attr,
- int socket);
-int mlx5_devx_cmd_modify_rq(struct mlx5_devx_obj *rq,
- struct mlx5_devx_modify_rq_attr *rq_attr);
-struct mlx5_devx_obj *mlx5_devx_cmd_create_tir(struct ibv_context *ctx,
- struct mlx5_devx_tir_attr *tir_attr);
-struct mlx5_devx_obj *mlx5_devx_cmd_create_rqt(struct ibv_context *ctx,
- struct mlx5_devx_rqt_attr *rqt_attr);
-struct mlx5_devx_obj *mlx5_devx_cmd_create_sq
- (struct ibv_context *ctx, struct mlx5_devx_create_sq_attr *sq_attr);
-int mlx5_devx_cmd_modify_sq
- (struct mlx5_devx_obj *sq, struct mlx5_devx_modify_sq_attr *sq_attr);
-struct mlx5_devx_obj *mlx5_devx_cmd_create_tis
- (struct ibv_context *ctx, struct mlx5_devx_tis_attr *tis_attr);
-struct mlx5_devx_obj *mlx5_devx_cmd_create_td(struct ibv_context *ctx);
-
-int mlx5_devx_cmd_flow_dump(struct mlx5_ibv_shared *sh, FILE *file);
-
/* mlx5_flow_meter.c */
int mlx5_flow_meter_ops_get(struct rte_eth_dev *dev, void *arg);
diff --git a/drivers/net/mlx5/mlx5_devx_cmds.c b/drivers/net/mlx5/mlx5_devx_cmds.c
index 282d501..62ca590 100644
--- a/drivers/net/mlx5/mlx5_devx_cmds.c
+++ b/drivers/net/mlx5/mlx5_devx_cmds.c
@@ -1,13 +1,15 @@
// SPDX-License-Identifier: BSD-3-Clause
/* Copyright 2018 Mellanox Technologies, Ltd */
+#include <unistd.h>
+
#include <rte_flow_driver.h>
#include <rte_malloc.h>
-#include <unistd.h>
-#include "mlx5.h"
-#include "mlx5_glue.h"
#include "mlx5_prm.h"
+#include "mlx5_devx_cmds.h"
+#include "mlx5_utils.h"
+
/**
* Allocate flow counters via devx interface.
@@ -936,8 +938,12 @@ struct mlx5_devx_obj *
/**
* Dump all flows to file.
*
- * @param[in] sh
- * Pointer to context.
+ * @param[in] fdb_domain
+ * FDB domain.
+ * @param[in] rx_domain
+ * RX domain.
+ * @param[in] tx_domain
+ * TX domain.
* @param[out] file
* Pointer to file stream.
*
@@ -945,23 +951,24 @@ struct mlx5_devx_obj *
* 0 on success, a nagative value otherwise.
*/
int
-mlx5_devx_cmd_flow_dump(struct mlx5_ibv_shared *sh __rte_unused,
- FILE *file __rte_unused)
+mlx5_devx_cmd_flow_dump(void *fdb_domain __rte_unused,
+ void *rx_domain __rte_unused,
+ void *tx_domain __rte_unused, FILE *file __rte_unused)
{
int ret = 0;
#ifdef HAVE_MLX5_DR_FLOW_DUMP
- if (sh->fdb_domain) {
- ret = mlx5_glue->dr_dump_domain(file, sh->fdb_domain);
+ if (fdb_domain) {
+ ret = mlx5_glue->dr_dump_domain(file, fdb_domain);
if (ret)
return ret;
}
- assert(sh->rx_domain);
- ret = mlx5_glue->dr_dump_domain(file, sh->rx_domain);
+ assert(rx_domain);
+ ret = mlx5_glue->dr_dump_domain(file, rx_domain);
if (ret)
return ret;
- assert(sh->tx_domain);
- ret = mlx5_glue->dr_dump_domain(file, sh->tx_domain);
+ assert(tx_domain);
+ ret = mlx5_glue->dr_dump_domain(file, tx_domain);
#else
ret = ENOTSUP;
#endif
diff --git a/drivers/net/mlx5/mlx5_devx_cmds.h b/drivers/net/mlx5/mlx5_devx_cmds.h
new file mode 100644
index 0000000..2d58d96
--- /dev/null
+++ b/drivers/net/mlx5/mlx5_devx_cmds.h
@@ -0,0 +1,231 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2019 Mellanox Technologies, Ltd
+ */
+
+#ifndef RTE_PMD_MLX5_DEVX_CMDS_H_
+#define RTE_PMD_MLX5_DEVX_CMDS_H_
+
+#include "mlx5_glue.h"
+
+
+/* devX creation object */
+struct mlx5_devx_obj {
+ struct mlx5dv_devx_obj *obj; /* The DV object. */
+ int id; /* The object ID. */
+};
+
+struct mlx5_devx_mkey_attr {
+ uint64_t addr;
+ uint64_t size;
+ uint32_t umem_id;
+ uint32_t pd;
+};
+
+/* HCA qos attributes. */
+struct mlx5_hca_qos_attr {
+ uint32_t sup:1; /* Whether QOS is supported. */
+ uint32_t srtcm_sup:1; /* Whether srTCM mode is supported. */
+ uint32_t flow_meter_reg_share:1;
+ /* Whether reg_c share is supported. */
+ uint8_t log_max_flow_meter;
+ /* Power of the maximum supported meters. */
+ uint8_t flow_meter_reg_c_ids;
+ /* Bitmap of the reg_Cs available for flow meter to use. */
+
+};
+
+/* HCA supports this number of time periods for LRO. */
+#define MLX5_LRO_NUM_SUPP_PERIODS 4
+
+/* HCA attributes. */
+struct mlx5_hca_attr {
+ uint32_t eswitch_manager:1;
+ uint32_t flow_counters_dump:1;
+ uint8_t flow_counter_bulk_alloc_bitmap;
+ uint32_t eth_net_offloads:1;
+ uint32_t eth_virt:1;
+ uint32_t wqe_vlan_insert:1;
+ uint32_t wqe_inline_mode:2;
+ uint32_t vport_inline_mode:3;
+ uint32_t tunnel_stateless_geneve_rx:1;
+ uint32_t geneve_max_opt_len:1; /* 0x0: 14DW, 0x1: 63DW */
+ uint32_t tunnel_stateless_gtp:1;
+ uint32_t lro_cap:1;
+ uint32_t tunnel_lro_gre:1;
+ uint32_t tunnel_lro_vxlan:1;
+ uint32_t lro_max_msg_sz_mode:2;
+ uint32_t lro_timer_supported_periods[MLX5_LRO_NUM_SUPP_PERIODS];
+ uint32_t flex_parser_protocols;
+ uint32_t hairpin:1;
+ uint32_t log_max_hairpin_queues:5;
+ uint32_t log_max_hairpin_wq_data_sz:5;
+ uint32_t log_max_hairpin_num_packets:5;
+ uint32_t vhca_id:16;
+ struct mlx5_hca_qos_attr qos;
+};
+
+struct mlx5_devx_wq_attr {
+ uint32_t wq_type:4;
+ uint32_t wq_signature:1;
+ uint32_t end_padding_mode:2;
+ uint32_t cd_slave:1;
+ uint32_t hds_skip_first_sge:1;
+ uint32_t log2_hds_buf_size:3;
+ uint32_t page_offset:5;
+ uint32_t lwm:16;
+ uint32_t pd:24;
+ uint32_t uar_page:24;
+ uint64_t dbr_addr;
+ uint32_t hw_counter;
+ uint32_t sw_counter;
+ uint32_t log_wq_stride:4;
+ uint32_t log_wq_pg_sz:5;
+ uint32_t log_wq_sz:5;
+ uint32_t dbr_umem_valid:1;
+ uint32_t wq_umem_valid:1;
+ uint32_t log_hairpin_num_packets:5;
+ uint32_t log_hairpin_data_sz:5;
+ uint32_t single_wqe_log_num_of_strides:4;
+ uint32_t two_byte_shift_en:1;
+ uint32_t single_stride_log_num_of_bytes:3;
+ uint32_t dbr_umem_id;
+ uint32_t wq_umem_id;
+ uint64_t wq_umem_offset;
+};
+
+/* Create RQ attributes structure, used by create RQ operation. */
+struct mlx5_devx_create_rq_attr {
+ uint32_t rlky:1;
+ uint32_t delay_drop_en:1;
+ uint32_t scatter_fcs:1;
+ uint32_t vsd:1;
+ uint32_t mem_rq_type:4;
+ uint32_t state:4;
+ uint32_t flush_in_error_en:1;
+ uint32_t hairpin:1;
+ uint32_t user_index:24;
+ uint32_t cqn:24;
+ uint32_t counter_set_id:8;
+ uint32_t rmpn:24;
+ struct mlx5_devx_wq_attr wq_attr;
+};
+
+/* Modify RQ attributes structure, used by modify RQ operation. */
+struct mlx5_devx_modify_rq_attr {
+ uint32_t rqn:24;
+ uint32_t rq_state:4; /* Current RQ state. */
+ uint32_t state:4; /* Required RQ state. */
+ uint32_t scatter_fcs:1;
+ uint32_t vsd:1;
+ uint32_t counter_set_id:8;
+ uint32_t hairpin_peer_sq:24;
+ uint32_t hairpin_peer_vhca:16;
+ uint64_t modify_bitmask;
+ uint32_t lwm:16; /* Contained WQ lwm. */
+};
+
+struct mlx5_rx_hash_field_select {
+ uint32_t l3_prot_type:1;
+ uint32_t l4_prot_type:1;
+ uint32_t selected_fields:30;
+};
+
+/* TIR attributes structure, used by TIR operations. */
+struct mlx5_devx_tir_attr {
+ uint32_t disp_type:4;
+ uint32_t lro_timeout_period_usecs:16;
+ uint32_t lro_enable_mask:4;
+ uint32_t lro_max_msg_sz:8;
+ uint32_t inline_rqn:24;
+ uint32_t rx_hash_symmetric:1;
+ uint32_t tunneled_offload_en:1;
+ uint32_t indirect_table:24;
+ uint32_t rx_hash_fn:4;
+ uint32_t self_lb_block:2;
+ uint32_t transport_domain:24;
+ uint32_t rx_hash_toeplitz_key[10];
+ struct mlx5_rx_hash_field_select rx_hash_field_selector_outer;
+ struct mlx5_rx_hash_field_select rx_hash_field_selector_inner;
+};
+
+/* RQT attributes structure, used by RQT operations. */
+struct mlx5_devx_rqt_attr {
+ uint32_t rqt_max_size:16;
+ uint32_t rqt_actual_size:16;
+ uint32_t rq_list[];
+};
+
+/* TIS attributes structure. */
+struct mlx5_devx_tis_attr {
+ uint32_t strict_lag_tx_port_affinity:1;
+ uint32_t tls_en:1;
+ uint32_t lag_tx_port_affinity:4;
+ uint32_t prio:4;
+ uint32_t transport_domain:24;
+};
+
+/* SQ attributes structure, used by SQ create operation. */
+struct mlx5_devx_create_sq_attr {
+ uint32_t rlky:1;
+ uint32_t cd_master:1;
+ uint32_t fre:1;
+ uint32_t flush_in_error_en:1;
+ uint32_t allow_multi_pkt_send_wqe:1;
+ uint32_t min_wqe_inline_mode:3;
+ uint32_t state:4;
+ uint32_t reg_umr:1;
+ uint32_t allow_swp:1;
+ uint32_t hairpin:1;
+ uint32_t user_index:24;
+ uint32_t cqn:24;
+ uint32_t packet_pacing_rate_limit_index:16;
+ uint32_t tis_lst_sz:16;
+ uint32_t tis_num:24;
+ struct mlx5_devx_wq_attr wq_attr;
+};
+
+/* SQ attributes structure, used by SQ modify operation. */
+struct mlx5_devx_modify_sq_attr {
+ uint32_t sq_state:4;
+ uint32_t state:4;
+ uint32_t hairpin_peer_rq:24;
+ uint32_t hairpin_peer_vhca:16;
+};
+
+/* mlx5_devx_cmds.c */
+
+struct mlx5_devx_obj *mlx5_devx_cmd_flow_counter_alloc(struct ibv_context *ctx,
+ uint32_t bulk_sz);
+int mlx5_devx_cmd_destroy(struct mlx5_devx_obj *obj);
+int mlx5_devx_cmd_flow_counter_query(struct mlx5_devx_obj *dcs,
+ int clear, uint32_t n_counters,
+ uint64_t *pkts, uint64_t *bytes,
+ uint32_t mkey, void *addr,
+ struct mlx5dv_devx_cmd_comp *cmd_comp,
+ uint64_t async_id);
+int mlx5_devx_cmd_query_hca_attr(struct ibv_context *ctx,
+ struct mlx5_hca_attr *attr);
+struct mlx5_devx_obj *mlx5_devx_cmd_mkey_create(struct ibv_context *ctx,
+ struct mlx5_devx_mkey_attr *attr);
+int mlx5_devx_get_out_command_status(void *out);
+int mlx5_devx_cmd_qp_query_tis_td(struct ibv_qp *qp, uint32_t tis_num,
+ uint32_t *tis_td);
+struct mlx5_devx_obj *mlx5_devx_cmd_create_rq(struct ibv_context *ctx,
+ struct mlx5_devx_create_rq_attr *rq_attr,
+ int socket);
+int mlx5_devx_cmd_modify_rq(struct mlx5_devx_obj *rq,
+ struct mlx5_devx_modify_rq_attr *rq_attr);
+struct mlx5_devx_obj *mlx5_devx_cmd_create_tir(struct ibv_context *ctx,
+ struct mlx5_devx_tir_attr *tir_attr);
+struct mlx5_devx_obj *mlx5_devx_cmd_create_rqt(struct ibv_context *ctx,
+ struct mlx5_devx_rqt_attr *rqt_attr);
+struct mlx5_devx_obj *mlx5_devx_cmd_create_sq(struct ibv_context *ctx,
+ struct mlx5_devx_create_sq_attr *sq_attr);
+int mlx5_devx_cmd_modify_sq(struct mlx5_devx_obj *sq,
+ struct mlx5_devx_modify_sq_attr *sq_attr);
+struct mlx5_devx_obj *mlx5_devx_cmd_create_tis(struct ibv_context *ctx,
+ struct mlx5_devx_tis_attr *tis_attr);
+struct mlx5_devx_obj *mlx5_devx_cmd_create_td(struct ibv_context *ctx);
+int mlx5_devx_cmd_flow_dump(void *fdb_domain, void *rx_domain, void *tx_domain,
+ FILE *file);
+#endif /* RTE_PMD_MLX5_DEVX_CMDS_H_ */
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index 3b4c5db..ce0109c 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -38,6 +38,7 @@
#include "mlx5.h"
#include "mlx5_glue.h"
+#include "mlx5_devx_cmds.h"
#include "mlx5_rxtx.h"
#include "mlx5_utils.h"
diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index 5c9fea6..983b1c3 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -31,6 +31,7 @@
#include "mlx5_defs.h"
#include "mlx5_flow.h"
#include "mlx5_glue.h"
+#include "mlx5_devx_cmds.h"
#include "mlx5_prm.h"
#include "mlx5_rxtx.h"
@@ -5692,6 +5693,8 @@ struct mlx5_flow_counter *
struct rte_flow_error *error __rte_unused)
{
struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
- return mlx5_devx_cmd_flow_dump(priv->sh, file);
+ return mlx5_devx_cmd_flow_dump(sh->fdb_domain, sh->rx_domain,
+ sh->tx_domain, file);
}
diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index b90734e..653d649 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -32,6 +32,7 @@
#include "mlx5.h"
#include "mlx5_defs.h"
#include "mlx5_glue.h"
+#include "mlx5_devx_cmds.h"
#include "mlx5_flow.h"
#include "mlx5_prm.h"
#include "mlx5_rxtx.h"
diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index 4092cb7..371b996 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -37,6 +37,7 @@
#include "mlx5_defs.h"
#include "mlx5_glue.h"
#include "mlx5_flow.h"
+#include "mlx5_devx_cmds.h"
/* Default RSS hash key also used for ConnectX-3. */
uint8_t rss_hash_default_key[] = {
diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
index 5e31f01..5a03556 100644
--- a/drivers/net/mlx5/mlx5_rxtx.c
+++ b/drivers/net/mlx5/mlx5_rxtx.c
@@ -29,6 +29,7 @@
#include <rte_flow.h>
#include "mlx5.h"
+#include "mlx5_devx_cmds.h"
#include "mlx5_utils.h"
#include "mlx5_rxtx.h"
#include "mlx5_autoconf.h"
diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c
index 1a76f6e..5adb4dc 100644
--- a/drivers/net/mlx5/mlx5_txq.c
+++ b/drivers/net/mlx5/mlx5_txq.c
@@ -34,6 +34,7 @@
#include "mlx5_rxtx.h"
#include "mlx5_autoconf.h"
#include "mlx5_glue.h"
+#include "mlx5_devx_cmds.h"
/**
* Allocate TX queue elements.
diff --git a/drivers/net/mlx5/mlx5_vlan.c b/drivers/net/mlx5/mlx5_vlan.c
index 5f6554a..feac0f1 100644
--- a/drivers/net/mlx5/mlx5_vlan.c
+++ b/drivers/net/mlx5/mlx5_vlan.c
@@ -30,6 +30,7 @@
#include "mlx5.h"
#include "mlx5_autoconf.h"
#include "mlx5_glue.h"
+#include "mlx5_devx_cmds.h"
#include "mlx5_rxtx.h"
#include "mlx5_utils.h"
--
1.8.3.1
next prev parent reply other threads:[~2020-01-29 12:39 UTC|newest]
Thread overview: 174+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-20 17:02 [dpdk-dev] [PATCH v1 00/38] Introduce mlx5 vDPA driver Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 01/38] net/mlx5: separate DevX commands interface Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 02/38] mlx5: prepare common library Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 03/38] mlx5: share the mlx5 glue reference Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 04/38] mlx5: share mlx5 PCI device detection Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 05/38] mlx5: share mlx5 devices information Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 06/38] drivers: introduce mlx5 vDPA driver Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 07/38] common/mlx5: expose vDPA DevX capabilities Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 08/38] vdpa/mlx5: support queues number operation Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 09/38] vdpa/mlx5: support features get operations Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 10/38] common/mlx5: glue null memory region allocation Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 11/38] common/mlx5: support DevX indirect mkey creation Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 12/38] common/mlx5: glue event queue query Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 13/38] common/mlx5: glue event interrupt commands Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 14/38] common/mlx5: glue UAR allocation Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 15/38] common/mlx5: add DevX command to create CQ Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 16/38] common/mlx5: glue VAR allocation Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 17/38] common/mlx5: add DevX virtio emulation commands Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 18/38] vdpa/mlx5: prepare memory regions Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 19/38] mlx5: share CQ entry check Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 20/38] vdpa/mlx5: prepare completion queues Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 21/38] vdpa/mlx5: handle completions Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 22/38] vdpa/mlx5: prepare virtio queues Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 23/38] vdpa/mlx5: support stateless offloads Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 24/38] common/mlx5: allow type configuration for DevX RQT Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 25/38] common/mlx5: add TIR fields constants Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 26/38] common/mlx5: add DevX command to modify RQT Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 27/38] common/mlx5: get DevX capability for max RQT size Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 28/38] vdpa/mlx5: add basic steering configurations Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 29/38] vdpa/mlx5: support queue state operation Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 30/38] vdpa/mlx5: map doorbell Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 31/38] vdpa/mlx5: support live migration Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 32/38] vdpa/mlx5: support close and config operations Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 33/38] mlx5: skip probing according to the vDPA mode Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 34/38] net/mlx5: separate Netlink commands interface Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 35/38] net/mlx5: reduce Netlink commands dependencies Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 36/38] mlx5: share Netlink commands Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 37/38] common/mlx5: support ROCE disable through Netlink Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 38/38] vdpa/mlx5: disable ROCE Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 00/25] Introduce mlx5 common library Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 01/25] net/mlx5: separate DevX commands interface Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 02/25] drivers: introduce mlx5 common library Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 03/25] common/mlx5: share the mlx5 glue reference Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 04/25] common/mlx5: share mlx5 PCI device detection Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 05/25] common/mlx5: share mlx5 devices information Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 06/25] common/mlx5: share CQ entry check Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 07/25] common/mlx5: add query vDPA DevX capabilities Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 08/25] common/mlx5: glue null memory region allocation Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 09/25] common/mlx5: support DevX indirect mkey creation Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 10/25] common/mlx5: glue event queue query Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 11/25] common/mlx5: glue event interrupt commands Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 12/25] common/mlx5: glue UAR allocation Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 13/25] common/mlx5: add DevX command to create CQ Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 14/25] common/mlx5: glue VAR allocation Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 15/25] common/mlx5: add DevX virtq commands Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 16/25] common/mlx5: add support for DevX QP operations Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 17/25] common/mlx5: allow type configuration for DevX RQT Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 18/25] common/mlx5: add TIR field constants Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 19/25] common/mlx5: add DevX command to modify RQT Matan Azrad
2020-01-28 10:06 ` [dpdk-dev] [PATCH v2 20/25] common/mlx5: get DevX capability for max RQT size Matan Azrad
2020-01-28 10:06 ` [dpdk-dev] [PATCH v2 21/25] net/mlx5: select driver by vDPA device argument Matan Azrad
2020-01-28 10:06 ` [dpdk-dev] [PATCH v2 22/25] net/mlx5: separate Netlink command interface Matan Azrad
2020-01-28 10:06 ` [dpdk-dev] [PATCH v2 23/25] net/mlx5: reduce Netlink commands dependencies Matan Azrad
2020-01-28 10:06 ` [dpdk-dev] [PATCH v2 24/25] common/mlx5: share Netlink commands Matan Azrad
2020-01-28 10:06 ` [dpdk-dev] [PATCH v2 25/25] common/mlx5: support ROCE disable through Netlink Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 00/25] Introduce mlx5 common library Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 01/25] net/mlx5: separate DevX commands interface Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 02/25] drivers: introduce mlx5 common library Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 03/25] common/mlx5: share the mlx5 glue reference Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 04/25] common/mlx5: share mlx5 PCI device detection Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 05/25] common/mlx5: share mlx5 devices information Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 06/25] common/mlx5: share CQ entry check Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 07/25] common/mlx5: add query vDPA DevX capabilities Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 08/25] common/mlx5: glue null memory region allocation Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 09/25] common/mlx5: support DevX indirect mkey creation Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 10/25] common/mlx5: glue event queue query Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 11/25] common/mlx5: glue event interrupt commands Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 12/25] common/mlx5: glue UAR allocation Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 13/25] common/mlx5: add DevX command to create CQ Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 14/25] common/mlx5: glue VAR allocation Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 15/25] common/mlx5: add DevX virtq commands Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 16/25] common/mlx5: add support for DevX QP operations Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 17/25] common/mlx5: allow type configuration for DevX RQT Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 18/25] common/mlx5: add TIR field constants Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 19/25] common/mlx5: add DevX command to modify RQT Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 20/25] common/mlx5: get DevX capability for max RQT size Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 21/25] net/mlx5: select driver by vDPA device argument Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 22/25] net/mlx5: separate Netlink command interface Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 23/25] net/mlx5: reduce Netlink commands dependencies Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 24/25] common/mlx5: share Netlink commands Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 25/25] common/mlx5: support ROCE disable through Netlink Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 00/25] Introduce mlx5 common library Matan Azrad
2020-01-29 12:38 ` Matan Azrad [this message]
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 02/25] drivers: introduce " Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 03/25] common/mlx5: share the mlx5 glue reference Matan Azrad
2020-01-30 8:10 ` Matan Azrad
2020-01-30 8:38 ` Raslan Darawsheh
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 04/25] common/mlx5: share mlx5 PCI device detection Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 05/25] common/mlx5: share mlx5 devices information Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 06/25] common/mlx5: share CQ entry check Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 07/25] common/mlx5: add query vDPA DevX capabilities Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 08/25] common/mlx5: glue null memory region allocation Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 09/25] common/mlx5: support DevX indirect mkey creation Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 10/25] common/mlx5: glue event queue query Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 11/25] common/mlx5: glue event interrupt commands Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 12/25] common/mlx5: glue UAR allocation Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 13/25] common/mlx5: add DevX command to create CQ Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 14/25] common/mlx5: glue VAR allocation Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 15/25] common/mlx5: add DevX virtq commands Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 16/25] common/mlx5: add support for DevX QP operations Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 17/25] common/mlx5: allow type configuration for DevX RQT Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 18/25] common/mlx5: add TIR field constants Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 19/25] common/mlx5: add DevX command to modify RQT Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 20/25] common/mlx5: get DevX capability for max RQT size Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 21/25] net/mlx5: select driver by class device argument Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 22/25] net/mlx5: separate Netlink command interface Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 23/25] net/mlx5: reduce Netlink commands dependencies Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 24/25] common/mlx5: share Netlink commands Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 25/25] common/mlx5: support ROCE disable through Netlink Matan Azrad
2020-01-30 12:26 ` [dpdk-dev] [PATCH v4 00/25] Introduce mlx5 common library Raslan Darawsheh
2020-01-29 10:08 ` [dpdk-dev] [PATCH v2 00/13] Introduce mlx5 vDPA driver Matan Azrad
2020-01-29 10:08 ` [dpdk-dev] [PATCH v2 01/13] drivers: introduce " Matan Azrad
2020-01-30 14:38 ` Maxime Coquelin
2020-02-01 17:53 ` Matan Azrad
2020-01-29 10:08 ` [dpdk-dev] [PATCH v2 02/13] vdpa/mlx5: support queues number operation Matan Azrad
2020-01-30 14:46 ` Maxime Coquelin
2020-01-29 10:08 ` [dpdk-dev] [PATCH v2 03/13] vdpa/mlx5: support features get operations Matan Azrad
2020-01-30 14:50 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 04/13] vdpa/mlx5: prepare memory regions Matan Azrad
2020-01-30 17:39 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 05/13] vdpa/mlx5: prepare HW queues Matan Azrad
2020-01-30 18:17 ` Maxime Coquelin
2020-01-31 6:56 ` Matan Azrad
2020-01-31 14:47 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 06/13] vdpa/mlx5: prepare virtio queues Matan Azrad
2020-01-30 20:00 ` Maxime Coquelin
2020-01-31 7:34 ` Matan Azrad
2020-01-31 14:46 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 07/13] vdpa/mlx5: support stateless offloads Matan Azrad
2020-01-30 20:08 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 08/13] vdpa/mlx5: add basic steering configurations Matan Azrad
2020-01-31 15:10 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 09/13] vdpa/mlx5: support queue state operation Matan Azrad
2020-01-31 15:32 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 10/13] vdpa/mlx5: map doorbell Matan Azrad
2020-01-31 15:40 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 11/13] vdpa/mlx5: support live migration Matan Azrad
2020-01-31 16:01 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 12/13] vdpa/mlx5: support close and config operations Matan Azrad
2020-01-31 16:06 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 13/13] vdpa/mlx5: disable ROCE Matan Azrad
2020-01-31 16:42 ` Maxime Coquelin
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 00/13] Introduce mlx5 vDPA driver Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 01/13] drivers: introduce " Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 02/13] vdpa/mlx5: support queues number operation Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 03/13] vdpa/mlx5: support features get operations Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 04/13] vdpa/mlx5: prepare memory regions Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 05/13] vdpa/mlx5: prepare HW queues Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 06/13] vdpa/mlx5: prepare virtio queues Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 07/13] vdpa/mlx5: support stateless offloads Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 08/13] vdpa/mlx5: add basic steering configurations Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 09/13] vdpa/mlx5: support queue state operation Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 10/13] vdpa/mlx5: map doorbell Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 11/13] vdpa/mlx5: support live migration Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 12/13] vdpa/mlx5: support close and config operations Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 13/13] vdpa/mlx5: disable ROCE Matan Azrad
2020-02-03 9:27 ` Maxime Coquelin
2020-02-03 11:00 ` Maxime Coquelin
2020-02-03 12:44 ` Matan Azrad
2020-02-03 12:45 ` Maxime Coquelin
2020-02-03 8:34 ` [dpdk-dev] [PATCH v3 00/13] Introduce mlx5 vDPA driver Maxime Coquelin
2020-02-03 16:42 ` Maxime Coquelin
2020-02-03 13:24 ` [dpdk-dev] [PATCH v2 " Maxime Coquelin
2020-02-03 16:41 ` Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1580301530-6643-2-git-send-email-matan@mellanox.com \
--to=matan@mellanox.com \
--cc=dev@dpdk.org \
--cc=rasland@mellanox.com \
--cc=viacheslavo@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).