From: Matan Azrad <matan@mellanox.com>
To: dev@dpdk.org, Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Cc: Raslan Darawsheh <rasland@mellanox.com>
Subject: [dpdk-dev] [PATCH v4 07/25] common/mlx5: add query vDPA DevX capabilities
Date: Wed, 29 Jan 2020 12:38:32 +0000 [thread overview]
Message-ID: <1580301530-6643-8-git-send-email-matan@mellanox.com> (raw)
In-Reply-To: <1580301530-6643-1-git-send-email-matan@mellanox.com>
Add the DevX capabilities for vDPA configuration and information of
Mellanox devices.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
---
drivers/common/mlx5/mlx5_devx_cmds.c | 90 ++++++++++++++++++++++++++++++++++++
drivers/common/mlx5/mlx5_devx_cmds.h | 24 ++++++++++
drivers/common/mlx5/mlx5_prm.h | 45 ++++++++++++++++++
3 files changed, 159 insertions(+)
diff --git a/drivers/common/mlx5/mlx5_devx_cmds.c b/drivers/common/mlx5/mlx5_devx_cmds.c
index 4d94f92..3a10ff0 100644
--- a/drivers/common/mlx5/mlx5_devx_cmds.c
+++ b/drivers/common/mlx5/mlx5_devx_cmds.c
@@ -285,6 +285,91 @@ struct mlx5_devx_obj *
}
/**
+ * Query NIC vDPA attributes.
+ *
+ * @param[in] ctx
+ * ibv contexts returned from mlx5dv_open_device.
+ * @param[out] vdpa_attr
+ * vDPA Attributes structure to fill.
+ */
+static void
+mlx5_devx_cmd_query_hca_vdpa_attr(struct ibv_context *ctx,
+ struct mlx5_hca_vdpa_attr *vdpa_attr)
+{
+ uint32_t in[MLX5_ST_SZ_DW(query_hca_cap_in)] = {0};
+ uint32_t out[MLX5_ST_SZ_DW(query_hca_cap_out)] = {0};
+ void *hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
+ int status, syndrome, rc;
+
+ MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
+ MLX5_SET(query_hca_cap_in, in, op_mod,
+ MLX5_GET_HCA_CAP_OP_MOD_VDPA_EMULATION |
+ MLX5_HCA_CAP_OPMOD_GET_CUR);
+ rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), out, sizeof(out));
+ status = MLX5_GET(query_hca_cap_out, out, status);
+ syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
+ if (rc || status) {
+ RTE_LOG(DEBUG, PMD, "Failed to query devx VDPA capabilities,"
+ " status %x, syndrome = %x", status, syndrome);
+ vdpa_attr->valid = 0;
+ } else {
+ vdpa_attr->valid = 1;
+ vdpa_attr->desc_tunnel_offload_type =
+ MLX5_GET(virtio_emulation_cap, hcattr,
+ desc_tunnel_offload_type);
+ vdpa_attr->eth_frame_offload_type =
+ MLX5_GET(virtio_emulation_cap, hcattr,
+ eth_frame_offload_type);
+ vdpa_attr->virtio_version_1_0 =
+ MLX5_GET(virtio_emulation_cap, hcattr,
+ virtio_version_1_0);
+ vdpa_attr->tso_ipv4 = MLX5_GET(virtio_emulation_cap, hcattr,
+ tso_ipv4);
+ vdpa_attr->tso_ipv6 = MLX5_GET(virtio_emulation_cap, hcattr,
+ tso_ipv6);
+ vdpa_attr->tx_csum = MLX5_GET(virtio_emulation_cap, hcattr,
+ tx_csum);
+ vdpa_attr->rx_csum = MLX5_GET(virtio_emulation_cap, hcattr,
+ rx_csum);
+ vdpa_attr->event_mode = MLX5_GET(virtio_emulation_cap, hcattr,
+ event_mode);
+ vdpa_attr->virtio_queue_type =
+ MLX5_GET(virtio_emulation_cap, hcattr,
+ virtio_queue_type);
+ vdpa_attr->log_doorbell_stride =
+ MLX5_GET(virtio_emulation_cap, hcattr,
+ log_doorbell_stride);
+ vdpa_attr->log_doorbell_bar_size =
+ MLX5_GET(virtio_emulation_cap, hcattr,
+ log_doorbell_bar_size);
+ vdpa_attr->doorbell_bar_offset =
+ MLX5_GET64(virtio_emulation_cap, hcattr,
+ doorbell_bar_offset);
+ vdpa_attr->max_num_virtio_queues =
+ MLX5_GET(virtio_emulation_cap, hcattr,
+ max_num_virtio_queues);
+ vdpa_attr->umem_1_buffer_param_a =
+ MLX5_GET(virtio_emulation_cap, hcattr,
+ umem_1_buffer_param_a);
+ vdpa_attr->umem_1_buffer_param_b =
+ MLX5_GET(virtio_emulation_cap, hcattr,
+ umem_1_buffer_param_b);
+ vdpa_attr->umem_2_buffer_param_a =
+ MLX5_GET(virtio_emulation_cap, hcattr,
+ umem_2_buffer_param_a);
+ vdpa_attr->umem_2_buffer_param_b =
+ MLX5_GET(virtio_emulation_cap, hcattr,
+ umem_2_buffer_param_a);
+ vdpa_attr->umem_3_buffer_param_a =
+ MLX5_GET(virtio_emulation_cap, hcattr,
+ umem_3_buffer_param_a);
+ vdpa_attr->umem_3_buffer_param_b =
+ MLX5_GET(virtio_emulation_cap, hcattr,
+ umem_3_buffer_param_b);
+ }
+}
+
+/**
* Query HCA attributes.
* Using those attributes we can check on run time if the device
* is having the required capabilities.
@@ -343,6 +428,9 @@ struct mlx5_devx_obj *
attr->flex_parser_protocols = MLX5_GET(cmd_hca_cap, hcattr,
flex_parser_protocols);
attr->qos.sup = MLX5_GET(cmd_hca_cap, hcattr, qos);
+ attr->vdpa.valid = !!(MLX5_GET64(cmd_hca_cap, hcattr,
+ general_obj_types) &
+ MLX5_GENERAL_OBJ_TYPES_CAP_VIRTQ_NET_Q);
if (attr->qos.sup) {
MLX5_SET(query_hca_cap_in, in, op_mod,
MLX5_GET_HCA_CAP_OP_MOD_QOS_CAP |
@@ -367,6 +455,8 @@ struct mlx5_devx_obj *
attr->qos.flow_meter_reg_share =
MLX5_GET(qos_cap, hcattr, flow_meter_reg_share);
}
+ if (attr->vdpa.valid)
+ mlx5_devx_cmd_query_hca_vdpa_attr(ctx, &attr->vdpa);
if (!attr->eth_net_offloads)
return 0;
diff --git a/drivers/common/mlx5/mlx5_devx_cmds.h b/drivers/common/mlx5/mlx5_devx_cmds.h
index 2d58d96..c1c9e99 100644
--- a/drivers/common/mlx5/mlx5_devx_cmds.h
+++ b/drivers/common/mlx5/mlx5_devx_cmds.h
@@ -34,6 +34,29 @@ struct mlx5_hca_qos_attr {
};
+struct mlx5_hca_vdpa_attr {
+ uint8_t virtio_queue_type;
+ uint32_t valid:1;
+ uint32_t desc_tunnel_offload_type:1;
+ uint32_t eth_frame_offload_type:1;
+ uint32_t virtio_version_1_0:1;
+ uint32_t tso_ipv4:1;
+ uint32_t tso_ipv6:1;
+ uint32_t tx_csum:1;
+ uint32_t rx_csum:1;
+ uint32_t event_mode:3;
+ uint32_t log_doorbell_stride:5;
+ uint32_t log_doorbell_bar_size:5;
+ uint32_t max_num_virtio_queues;
+ uint32_t umem_1_buffer_param_a;
+ uint32_t umem_1_buffer_param_b;
+ uint32_t umem_2_buffer_param_a;
+ uint32_t umem_2_buffer_param_b;
+ uint32_t umem_3_buffer_param_a;
+ uint32_t umem_3_buffer_param_b;
+ uint64_t doorbell_bar_offset;
+};
+
/* HCA supports this number of time periods for LRO. */
#define MLX5_LRO_NUM_SUPP_PERIODS 4
@@ -62,6 +85,7 @@ struct mlx5_hca_attr {
uint32_t log_max_hairpin_num_packets:5;
uint32_t vhca_id:16;
struct mlx5_hca_qos_attr qos;
+ struct mlx5_hca_vdpa_attr vdpa;
};
struct mlx5_devx_wq_attr {
diff --git a/drivers/common/mlx5/mlx5_prm.h b/drivers/common/mlx5/mlx5_prm.h
index 5730ad1..efd6ad4 100644
--- a/drivers/common/mlx5/mlx5_prm.h
+++ b/drivers/common/mlx5/mlx5_prm.h
@@ -881,6 +881,11 @@ enum {
MLX5_GET_HCA_CAP_OP_MOD_GENERAL_DEVICE = 0x0 << 1,
MLX5_GET_HCA_CAP_OP_MOD_ETHERNET_OFFLOAD_CAPS = 0x1 << 1,
MLX5_GET_HCA_CAP_OP_MOD_QOS_CAP = 0xc << 1,
+ MLX5_GET_HCA_CAP_OP_MOD_VDPA_EMULATION = 0x13 << 1,
+};
+
+enum {
+ MLX5_GENERAL_OBJ_TYPES_CAP_VIRTQ_NET_Q = (1ULL << 0xd),
};
enum {
@@ -1256,11 +1261,51 @@ struct mlx5_ifc_per_protocol_networking_offload_caps_bits {
u8 reserved_at_200[0x600];
};
+enum {
+ MLX5_VIRTQ_TYPE_SPLIT = 0,
+ MLX5_VIRTQ_TYPE_PACKED = 1,
+};
+
+enum {
+ MLX5_VIRTQ_EVENT_MODE_NO_MSIX = 0,
+ MLX5_VIRTQ_EVENT_MODE_QP = 1,
+ MLX5_VIRTQ_EVENT_MODE_MSIX = 2,
+};
+
+struct mlx5_ifc_virtio_emulation_cap_bits {
+ u8 desc_tunnel_offload_type[0x1];
+ u8 eth_frame_offload_type[0x1];
+ u8 virtio_version_1_0[0x1];
+ u8 tso_ipv4[0x1];
+ u8 tso_ipv6[0x1];
+ u8 tx_csum[0x1];
+ u8 rx_csum[0x1];
+ u8 reserved_at_7[0x1][0x9];
+ u8 event_mode[0x8];
+ u8 virtio_queue_type[0x8];
+ u8 reserved_at_20[0x13];
+ u8 log_doorbell_stride[0x5];
+ u8 reserved_at_3b[0x3];
+ u8 log_doorbell_bar_size[0x5];
+ u8 doorbell_bar_offset[0x40];
+ u8 reserved_at_80[0x8];
+ u8 max_num_virtio_queues[0x18];
+ u8 reserved_at_a0[0x60];
+ u8 umem_1_buffer_param_a[0x20];
+ u8 umem_1_buffer_param_b[0x20];
+ u8 umem_2_buffer_param_a[0x20];
+ u8 umem_2_buffer_param_b[0x20];
+ u8 umem_3_buffer_param_a[0x20];
+ u8 umem_3_buffer_param_b[0x20];
+ u8 reserved_at_1c0[0x620];
+};
+
union mlx5_ifc_hca_cap_union_bits {
struct mlx5_ifc_cmd_hca_cap_bits cmd_hca_cap;
struct mlx5_ifc_per_protocol_networking_offload_caps_bits
per_protocol_networking_offload_caps;
struct mlx5_ifc_qos_cap_bits qos_cap;
+ struct mlx5_ifc_virtio_emulation_cap_bits vdpa_caps;
u8 reserved_at_0[0x8000];
};
--
1.8.3.1
next prev parent reply other threads:[~2020-01-29 12:40 UTC|newest]
Thread overview: 174+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-20 17:02 [dpdk-dev] [PATCH v1 00/38] Introduce mlx5 vDPA driver Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 01/38] net/mlx5: separate DevX commands interface Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 02/38] mlx5: prepare common library Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 03/38] mlx5: share the mlx5 glue reference Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 04/38] mlx5: share mlx5 PCI device detection Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 05/38] mlx5: share mlx5 devices information Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 06/38] drivers: introduce mlx5 vDPA driver Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 07/38] common/mlx5: expose vDPA DevX capabilities Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 08/38] vdpa/mlx5: support queues number operation Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 09/38] vdpa/mlx5: support features get operations Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 10/38] common/mlx5: glue null memory region allocation Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 11/38] common/mlx5: support DevX indirect mkey creation Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 12/38] common/mlx5: glue event queue query Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 13/38] common/mlx5: glue event interrupt commands Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 14/38] common/mlx5: glue UAR allocation Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 15/38] common/mlx5: add DevX command to create CQ Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 16/38] common/mlx5: glue VAR allocation Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 17/38] common/mlx5: add DevX virtio emulation commands Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 18/38] vdpa/mlx5: prepare memory regions Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 19/38] mlx5: share CQ entry check Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 20/38] vdpa/mlx5: prepare completion queues Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 21/38] vdpa/mlx5: handle completions Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 22/38] vdpa/mlx5: prepare virtio queues Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 23/38] vdpa/mlx5: support stateless offloads Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 24/38] common/mlx5: allow type configuration for DevX RQT Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 25/38] common/mlx5: add TIR fields constants Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 26/38] common/mlx5: add DevX command to modify RQT Matan Azrad
2020-01-20 17:02 ` [dpdk-dev] [PATCH v1 27/38] common/mlx5: get DevX capability for max RQT size Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 28/38] vdpa/mlx5: add basic steering configurations Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 29/38] vdpa/mlx5: support queue state operation Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 30/38] vdpa/mlx5: map doorbell Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 31/38] vdpa/mlx5: support live migration Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 32/38] vdpa/mlx5: support close and config operations Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 33/38] mlx5: skip probing according to the vDPA mode Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 34/38] net/mlx5: separate Netlink commands interface Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 35/38] net/mlx5: reduce Netlink commands dependencies Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 36/38] mlx5: share Netlink commands Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 37/38] common/mlx5: support ROCE disable through Netlink Matan Azrad
2020-01-20 17:03 ` [dpdk-dev] [PATCH v1 38/38] vdpa/mlx5: disable ROCE Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 00/25] Introduce mlx5 common library Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 01/25] net/mlx5: separate DevX commands interface Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 02/25] drivers: introduce mlx5 common library Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 03/25] common/mlx5: share the mlx5 glue reference Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 04/25] common/mlx5: share mlx5 PCI device detection Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 05/25] common/mlx5: share mlx5 devices information Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 06/25] common/mlx5: share CQ entry check Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 07/25] common/mlx5: add query vDPA DevX capabilities Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 08/25] common/mlx5: glue null memory region allocation Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 09/25] common/mlx5: support DevX indirect mkey creation Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 10/25] common/mlx5: glue event queue query Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 11/25] common/mlx5: glue event interrupt commands Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 12/25] common/mlx5: glue UAR allocation Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 13/25] common/mlx5: add DevX command to create CQ Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 14/25] common/mlx5: glue VAR allocation Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 15/25] common/mlx5: add DevX virtq commands Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 16/25] common/mlx5: add support for DevX QP operations Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 17/25] common/mlx5: allow type configuration for DevX RQT Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 18/25] common/mlx5: add TIR field constants Matan Azrad
2020-01-28 10:05 ` [dpdk-dev] [PATCH v2 19/25] common/mlx5: add DevX command to modify RQT Matan Azrad
2020-01-28 10:06 ` [dpdk-dev] [PATCH v2 20/25] common/mlx5: get DevX capability for max RQT size Matan Azrad
2020-01-28 10:06 ` [dpdk-dev] [PATCH v2 21/25] net/mlx5: select driver by vDPA device argument Matan Azrad
2020-01-28 10:06 ` [dpdk-dev] [PATCH v2 22/25] net/mlx5: separate Netlink command interface Matan Azrad
2020-01-28 10:06 ` [dpdk-dev] [PATCH v2 23/25] net/mlx5: reduce Netlink commands dependencies Matan Azrad
2020-01-28 10:06 ` [dpdk-dev] [PATCH v2 24/25] common/mlx5: share Netlink commands Matan Azrad
2020-01-28 10:06 ` [dpdk-dev] [PATCH v2 25/25] common/mlx5: support ROCE disable through Netlink Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 00/25] Introduce mlx5 common library Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 01/25] net/mlx5: separate DevX commands interface Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 02/25] drivers: introduce mlx5 common library Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 03/25] common/mlx5: share the mlx5 glue reference Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 04/25] common/mlx5: share mlx5 PCI device detection Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 05/25] common/mlx5: share mlx5 devices information Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 06/25] common/mlx5: share CQ entry check Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 07/25] common/mlx5: add query vDPA DevX capabilities Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 08/25] common/mlx5: glue null memory region allocation Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 09/25] common/mlx5: support DevX indirect mkey creation Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 10/25] common/mlx5: glue event queue query Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 11/25] common/mlx5: glue event interrupt commands Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 12/25] common/mlx5: glue UAR allocation Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 13/25] common/mlx5: add DevX command to create CQ Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 14/25] common/mlx5: glue VAR allocation Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 15/25] common/mlx5: add DevX virtq commands Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 16/25] common/mlx5: add support for DevX QP operations Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 17/25] common/mlx5: allow type configuration for DevX RQT Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 18/25] common/mlx5: add TIR field constants Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 19/25] common/mlx5: add DevX command to modify RQT Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 20/25] common/mlx5: get DevX capability for max RQT size Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 21/25] net/mlx5: select driver by vDPA device argument Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 22/25] net/mlx5: separate Netlink command interface Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 23/25] net/mlx5: reduce Netlink commands dependencies Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 24/25] common/mlx5: share Netlink commands Matan Azrad
2020-01-28 16:27 ` [dpdk-dev] [PATCH v3 25/25] common/mlx5: support ROCE disable through Netlink Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 00/25] Introduce mlx5 common library Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 01/25] net/mlx5: separate DevX commands interface Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 02/25] drivers: introduce mlx5 common library Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 03/25] common/mlx5: share the mlx5 glue reference Matan Azrad
2020-01-30 8:10 ` Matan Azrad
2020-01-30 8:38 ` Raslan Darawsheh
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 04/25] common/mlx5: share mlx5 PCI device detection Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 05/25] common/mlx5: share mlx5 devices information Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 06/25] common/mlx5: share CQ entry check Matan Azrad
2020-01-29 12:38 ` Matan Azrad [this message]
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 08/25] common/mlx5: glue null memory region allocation Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 09/25] common/mlx5: support DevX indirect mkey creation Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 10/25] common/mlx5: glue event queue query Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 11/25] common/mlx5: glue event interrupt commands Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 12/25] common/mlx5: glue UAR allocation Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 13/25] common/mlx5: add DevX command to create CQ Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 14/25] common/mlx5: glue VAR allocation Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 15/25] common/mlx5: add DevX virtq commands Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 16/25] common/mlx5: add support for DevX QP operations Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 17/25] common/mlx5: allow type configuration for DevX RQT Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 18/25] common/mlx5: add TIR field constants Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 19/25] common/mlx5: add DevX command to modify RQT Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 20/25] common/mlx5: get DevX capability for max RQT size Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 21/25] net/mlx5: select driver by class device argument Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 22/25] net/mlx5: separate Netlink command interface Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 23/25] net/mlx5: reduce Netlink commands dependencies Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 24/25] common/mlx5: share Netlink commands Matan Azrad
2020-01-29 12:38 ` [dpdk-dev] [PATCH v4 25/25] common/mlx5: support ROCE disable through Netlink Matan Azrad
2020-01-30 12:26 ` [dpdk-dev] [PATCH v4 00/25] Introduce mlx5 common library Raslan Darawsheh
2020-01-29 10:08 ` [dpdk-dev] [PATCH v2 00/13] Introduce mlx5 vDPA driver Matan Azrad
2020-01-29 10:08 ` [dpdk-dev] [PATCH v2 01/13] drivers: introduce " Matan Azrad
2020-01-30 14:38 ` Maxime Coquelin
2020-02-01 17:53 ` Matan Azrad
2020-01-29 10:08 ` [dpdk-dev] [PATCH v2 02/13] vdpa/mlx5: support queues number operation Matan Azrad
2020-01-30 14:46 ` Maxime Coquelin
2020-01-29 10:08 ` [dpdk-dev] [PATCH v2 03/13] vdpa/mlx5: support features get operations Matan Azrad
2020-01-30 14:50 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 04/13] vdpa/mlx5: prepare memory regions Matan Azrad
2020-01-30 17:39 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 05/13] vdpa/mlx5: prepare HW queues Matan Azrad
2020-01-30 18:17 ` Maxime Coquelin
2020-01-31 6:56 ` Matan Azrad
2020-01-31 14:47 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 06/13] vdpa/mlx5: prepare virtio queues Matan Azrad
2020-01-30 20:00 ` Maxime Coquelin
2020-01-31 7:34 ` Matan Azrad
2020-01-31 14:46 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 07/13] vdpa/mlx5: support stateless offloads Matan Azrad
2020-01-30 20:08 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 08/13] vdpa/mlx5: add basic steering configurations Matan Azrad
2020-01-31 15:10 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 09/13] vdpa/mlx5: support queue state operation Matan Azrad
2020-01-31 15:32 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 10/13] vdpa/mlx5: map doorbell Matan Azrad
2020-01-31 15:40 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 11/13] vdpa/mlx5: support live migration Matan Azrad
2020-01-31 16:01 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 12/13] vdpa/mlx5: support close and config operations Matan Azrad
2020-01-31 16:06 ` Maxime Coquelin
2020-01-29 10:09 ` [dpdk-dev] [PATCH v2 13/13] vdpa/mlx5: disable ROCE Matan Azrad
2020-01-31 16:42 ` Maxime Coquelin
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 00/13] Introduce mlx5 vDPA driver Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 01/13] drivers: introduce " Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 02/13] vdpa/mlx5: support queues number operation Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 03/13] vdpa/mlx5: support features get operations Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 04/13] vdpa/mlx5: prepare memory regions Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 05/13] vdpa/mlx5: prepare HW queues Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 06/13] vdpa/mlx5: prepare virtio queues Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 07/13] vdpa/mlx5: support stateless offloads Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 08/13] vdpa/mlx5: add basic steering configurations Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 09/13] vdpa/mlx5: support queue state operation Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 10/13] vdpa/mlx5: map doorbell Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 11/13] vdpa/mlx5: support live migration Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 12/13] vdpa/mlx5: support close and config operations Matan Azrad
2020-02-02 16:03 ` [dpdk-dev] [PATCH v3 13/13] vdpa/mlx5: disable ROCE Matan Azrad
2020-02-03 9:27 ` Maxime Coquelin
2020-02-03 11:00 ` Maxime Coquelin
2020-02-03 12:44 ` Matan Azrad
2020-02-03 12:45 ` Maxime Coquelin
2020-02-03 8:34 ` [dpdk-dev] [PATCH v3 00/13] Introduce mlx5 vDPA driver Maxime Coquelin
2020-02-03 16:42 ` Maxime Coquelin
2020-02-03 13:24 ` [dpdk-dev] [PATCH v2 " Maxime Coquelin
2020-02-03 16:41 ` Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1580301530-6643-8-git-send-email-matan@mellanox.com \
--to=matan@mellanox.com \
--cc=dev@dpdk.org \
--cc=rasland@mellanox.com \
--cc=viacheslavo@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).