From: Alexander Kozyrev <akozyrev@mellanox.com>
To: dev@dpdk.org
Cc: rasland@mellanox.com, matan@mellanox.com,
viacheslavo@mellanox.com, ferruh.yigit@intel.com,
thomas@monjalon.net
Subject: [dpdk-dev] [PATCH] net/mlx5: add Rx/Tx burst mode info callbacks
Date: Thu, 30 Jan 2020 18:28:01 +0200 [thread overview]
Message-ID: <1580401681-130802-1-git-send-email-akozyrev@mellanox.com> (raw)
Get a burst mode information for Rx/Tx queues in mlx5.
Provide callback functions to show this information in
a "show rxq info" and "show txq info" output.
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
---
doc/guides/nics/features/mlx5.ini | 1 +
drivers/net/mlx5/mlx5.c | 12 +++
drivers/net/mlx5/mlx5_rxtx.c | 172 ++++++++++++++++++++++++++++++++++++++
drivers/net/mlx5/mlx5_rxtx.h | 8 ++
4 files changed, 193 insertions(+)
diff --git a/doc/guides/nics/features/mlx5.ini b/doc/guides/nics/features/mlx5.ini
index b0a2f8e..3d1c5d6 100644
--- a/doc/guides/nics/features/mlx5.ini
+++ b/doc/guides/nics/features/mlx5.ini
@@ -10,6 +10,7 @@ Link status event = Y
Removal event = Y
Rx interrupt = Y
Queue start/stop = Y
+Burst mode info = Y
MTU update = Y
Jumbo frame = Y
Scattered Rx = Y
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 3b8de8f..ac793bd 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -1389,6 +1389,10 @@ struct mlx5_flow_id_pool *
.filter_ctrl = mlx5_dev_filter_ctrl,
.rx_descriptor_status = mlx5_rx_descriptor_status,
.tx_descriptor_status = mlx5_tx_descriptor_status,
+ .rxq_info_get = mlx5_rxq_info_get,
+ .txq_info_get = mlx5_txq_info_get,
+ .rx_burst_mode_get = mlx5_rx_burst_mode_get,
+ .tx_burst_mode_get = mlx5_tx_burst_mode_get,
.rx_queue_count = mlx5_rx_queue_count,
.rx_queue_intr_enable = mlx5_rx_intr_enable,
.rx_queue_intr_disable = mlx5_rx_intr_disable,
@@ -1411,6 +1415,10 @@ struct mlx5_flow_id_pool *
.dev_infos_get = mlx5_dev_infos_get,
.rx_descriptor_status = mlx5_rx_descriptor_status,
.tx_descriptor_status = mlx5_tx_descriptor_status,
+ .rxq_info_get = mlx5_rxq_info_get,
+ .txq_info_get = mlx5_txq_info_get,
+ .rx_burst_mode_get = mlx5_rx_burst_mode_get,
+ .tx_burst_mode_get = mlx5_tx_burst_mode_get,
.get_module_info = mlx5_get_module_info,
.get_module_eeprom = mlx5_get_module_eeprom,
};
@@ -1455,6 +1463,10 @@ struct mlx5_flow_id_pool *
.filter_ctrl = mlx5_dev_filter_ctrl,
.rx_descriptor_status = mlx5_rx_descriptor_status,
.tx_descriptor_status = mlx5_tx_descriptor_status,
+ .rxq_info_get = mlx5_rxq_info_get,
+ .txq_info_get = mlx5_txq_info_get,
+ .rx_burst_mode_get = mlx5_rx_burst_mode_get,
+ .tx_burst_mode_get = mlx5_tx_burst_mode_get,
.rx_queue_intr_enable = mlx5_rx_intr_enable,
.rx_queue_intr_disable = mlx5_rx_intr_disable,
.is_removed = mlx5_is_removed,
diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
index b14ae31..cd5cf92 100644
--- a/drivers/net/mlx5/mlx5_rxtx.c
+++ b/drivers/net/mlx5/mlx5_rxtx.c
@@ -535,6 +535,89 @@ enum mlx5_txcmp_code {
}
/**
+ * DPDK callback to get the RX queue information
+ *
+ * @param dev
+ * Pointer to the device structure.
+ *
+ * @param rx_queue_id
+ * Rx queue identificator.
+ *
+ * @param qinfo
+ * Pointer to the RX queue information structure.
+ *
+ * @return
+ * None.
+ */
+
+void
+mlx5_rxq_info_get(struct rte_eth_dev *dev, uint16_t rx_queue_id,
+ struct rte_eth_rxq_info *qinfo)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_rxq_data *rxq = (*priv->rxqs)[rx_queue_id];
+ struct mlx5_rxq_ctrl *rxq_ctrl =
+ container_of(rxq, struct mlx5_rxq_ctrl, rxq);
+
+ if (!rxq)
+ return;
+ qinfo->mp = mlx5_rxq_mprq_enabled(&rxq_ctrl->rxq) ?
+ rxq->mprq_mp : rxq->mp;
+ qinfo->conf.rx_thresh.pthresh = 0;
+ qinfo->conf.rx_thresh.hthresh = 0;
+ qinfo->conf.rx_thresh.wthresh = 0;
+ qinfo->conf.rx_free_thresh = rxq->rq_repl_thresh;
+ qinfo->conf.rx_drop_en = 1;
+ qinfo->conf.rx_deferred_start = rxq_ctrl ? 0 : 1;
+ qinfo->conf.offloads = dev->data->dev_conf.rxmode.offloads;
+ qinfo->scattered_rx = dev->data->scattered_rx;
+ qinfo->nb_desc = 1 << rxq->elts_n;
+}
+
+/**
+ * DPDK callback to get the RX packet burst mode information
+ *
+ * @param dev
+ * Pointer to the device structure.
+ *
+ * @param rx_queue_id
+ * Rx queue identificatior.
+ *
+ * @param mode
+ * Pointer to the burts mode information.
+ *
+ * @return
+ * 0 as success, -EINVAL as failure.
+ */
+
+int
+mlx5_rx_burst_mode_get(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id __rte_unused,
+ struct rte_eth_burst_mode *mode)
+{
+ eth_rx_burst_t pkt_burst = dev->rx_pkt_burst;
+
+ if (pkt_burst == mlx5_rx_burst) {
+ snprintf(mode->info, sizeof(mode->info), "%s", "Scalar");
+ } else if (pkt_burst == mlx5_rx_burst_mprq) {
+ snprintf(mode->info, sizeof(mode->info), "%s", "Multi-Packet RQ");
+ } else if (pkt_burst == mlx5_rx_burst_vec) {
+#if defined RTE_ARCH_X86_64
+ snprintf(mode->info, sizeof(mode->info), "%s", "Vector SSE");
+#elif defined RTE_ARCH_ARM64
+ snprintf(mode->info, sizeof(mode->info), "%s", "Vector Neon");
+#elif defined RTE_ARCH_PPC_64
+ snprintf(mode->info, sizeof(mode->info), "%s", "Vector AltiVec");
+#else
+ return -EINVAL;
+#endif
+ } else {
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
* DPDK callback to get the number of used descriptors in a RX queue
*
* @param dev
@@ -5335,3 +5418,92 @@ enum mlx5_txcmp_code {
}
return txoff_func[m].func;
}
+
+/**
+ * DPDK callback to get the TX queue information
+ *
+ * @param dev
+ * Pointer to the device structure.
+ *
+ * @param tx_queue_id
+ * Tx queue identificator.
+ *
+ * @param qinfo
+ * Pointer to the TX queue information structure.
+ *
+ * @return
+ * None.
+ */
+
+void
+mlx5_txq_info_get(struct rte_eth_dev *dev, uint16_t tx_queue_id,
+ struct rte_eth_txq_info *qinfo)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq = (*priv->txqs)[tx_queue_id];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq, struct mlx5_txq_ctrl, txq);
+
+ if (!txq)
+ return;
+ qinfo->nb_desc = txq->elts_s;
+ qinfo->conf.tx_thresh.pthresh = 0;
+ qinfo->conf.tx_thresh.hthresh = 0;
+ qinfo->conf.tx_thresh.wthresh = 0;
+ qinfo->conf.tx_rs_thresh = 0;
+ qinfo->conf.tx_free_thresh = 0;
+ qinfo->conf.tx_deferred_start = txq_ctrl ? 0 : 1;
+ qinfo->conf.offloads = dev->data->dev_conf.txmode.offloads;
+}
+
+/**
+ * DPDK callback to get the TX packet burst mode information
+ *
+ * @param dev
+ * Pointer to the device structure.
+ *
+ * @param tx_queue_id
+ * Tx queue identificatior.
+ *
+ * @param mode
+ * Pointer to the burts mode information.
+ *
+ * @return
+ * 0 as success, -EINVAL as failure.
+ */
+
+int
+mlx5_tx_burst_mode_get(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id __rte_unused,
+ struct rte_eth_burst_mode *mode)
+{
+ eth_tx_burst_t pkt_burst = dev->tx_pkt_burst;
+ unsigned int i, olx;
+
+ for (i = 0; i < RTE_DIM(txoff_func); i++) {
+ if (pkt_burst == txoff_func[i].func) {
+ olx = txoff_func[i].olx;
+ snprintf(mode->info, sizeof(mode->info),
+ "%s%s%s%s%s%s%s%s",
+ (olx & MLX5_TXOFF_CONFIG_EMPW) ?
+ ((olx & MLX5_TXOFF_CONFIG_MPW) ?
+ "Legacy MPW" : "Enhanced MPW") : "No MPW",
+ (olx & MLX5_TXOFF_CONFIG_MULTI) ?
+ " + MULTI" : "",
+ (olx & MLX5_TXOFF_CONFIG_TSO) ?
+ " + TSO" : "",
+ (olx & MLX5_TXOFF_CONFIG_SWP) ?
+ " + SWP" : "",
+ (olx & MLX5_TXOFF_CONFIG_CSUM) ?
+ " + CSUM" : "",
+ (olx & MLX5_TXOFF_CONFIG_INLINE) ?
+ " + INLINE" : "",
+ (olx & MLX5_TXOFF_CONFIG_VLAN) ?
+ " + VLAN" : "",
+ (olx & MLX5_TXOFF_CONFIG_METADATA) ?
+ " + METADATA" : "");
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
index c2cd23b..10ab7fd 100644
--- a/drivers/net/mlx5/mlx5_rxtx.h
+++ b/drivers/net/mlx5/mlx5_rxtx.h
@@ -475,6 +475,14 @@ void mlx5_dump_debug_information(const char *path, const char *title,
const void *buf, unsigned int len);
int mlx5_queue_state_modify_primary(struct rte_eth_dev *dev,
const struct mlx5_mp_arg_queue_state_modify *sm);
+void mlx5_rxq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
+ struct rte_eth_rxq_info *qinfo);
+void mlx5_txq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
+ struct rte_eth_txq_info *qinfo);
+int mlx5_rx_burst_mode_get(struct rte_eth_dev *dev, uint16_t rx_queue_id,
+ struct rte_eth_burst_mode *mode);
+int mlx5_tx_burst_mode_get(struct rte_eth_dev *dev, uint16_t tx_queue_id,
+ struct rte_eth_burst_mode *mode);
/* Vectorized version of mlx5_rxtx.c */
int mlx5_rxq_check_vec_support(struct mlx5_rxq_data *rxq_data);
--
1.8.3.1
next reply other threads:[~2020-01-30 16:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-30 16:28 Alexander Kozyrev [this message]
2020-01-31 15:12 ` Slava Ovsiienko
2020-02-03 11:56 ` Raslan Darawsheh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1580401681-130802-1-git-send-email-akozyrev@mellanox.com \
--to=akozyrev@mellanox.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=matan@mellanox.com \
--cc=rasland@mellanox.com \
--cc=thomas@monjalon.net \
--cc=viacheslavo@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).