DPDK patches and discussions
 help / color / mirror / Atom feed
From: Anoob Joseph <anoobj@marvell.com>
To: Akhil Goyal <akhil.goyal@nxp.com>, Radu Nicolau <radu.nicolau@intel.com>
Cc: Anoob Joseph <anoobj@marvell.com>,
	Jerin Jacob <jerinj@marvell.com>,
	Narayana Prasad <pathreya@marvell.com>,
	Lukasz Bartosik <lbartosik@marvell.com>,
	Konstantin Ananyev <konstantin.ananyev@intel.com>, <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v2] examples/ipsec-secgw: increase number of qps to lcore_params
Date: Thu, 30 Jan 2020 22:08:38 +0530	[thread overview]
Message-ID: <1580402318-3307-1-git-send-email-anoobj@marvell.com> (raw)
In-Reply-To: <1578667598-18942-1-git-send-email-anoobj@marvell.com>

Currently only one qp will be used for one core. The number of qps can
be increased to match the number of lcore params.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
---
 examples/ipsec-secgw/ipsec-secgw.c | 32 ++++++++++++++++++++++----------
 examples/ipsec-secgw/ipsec.c       | 13 +++++++------
 examples/ipsec-secgw/ipsec.h       |  9 ++++++++-
 3 files changed, 37 insertions(+), 17 deletions(-)

diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
index 3b5aaf6..b49dfef 100644
--- a/examples/ipsec-secgw/ipsec-secgw.c
+++ b/examples/ipsec-secgw/ipsec-secgw.c
@@ -72,7 +72,7 @@
 
 #define MAX_LCORE_PARAMS 1024
 
-#define UNPROTECTED_PORT(port) (unprotected_port_mask & (1 << portid))
+#define UNPROTECTED_PORT(port) (unprotected_port_mask & (1 << port))
 
 /*
  * Configurable number of RX/TX ring descriptors
@@ -968,20 +968,25 @@ route6_pkts(struct rt_ctx *rt_ctx, struct rte_mbuf *pkts[], uint8_t nb_pkts)
 }
 
 static inline void
-process_pkts(struct lcore_conf *qconf, struct rte_mbuf **pkts,
-		uint8_t nb_pkts, uint16_t portid)
+process_pkts(struct lcore_conf *qconf, struct lcore_rx_queue *rx_queue,
+		struct rte_mbuf **pkts, uint8_t nb_pkts)
 {
 	struct ipsec_traffic traffic;
 
 	prepare_traffic(pkts, &traffic, nb_pkts);
 
+	qconf->inbound.port_id = rx_queue->port_id;
+	qconf->inbound.queue_id = rx_queue->queue_id;
+	qconf->outbound.port_id = rx_queue->port_id;
+	qconf->outbound.queue_id = rx_queue->queue_id;
+
 	if (unlikely(single_sa)) {
-		if (UNPROTECTED_PORT(portid))
+		if (UNPROTECTED_PORT(rx_queue->port_id))
 			process_pkts_inbound_nosp(&qconf->inbound, &traffic);
 		else
 			process_pkts_outbound_nosp(&qconf->outbound, &traffic);
 	} else {
-		if (UNPROTECTED_PORT(portid))
+		if (UNPROTECTED_PORT(rx_queue->port_id))
 			process_pkts_inbound(&qconf->inbound, &traffic);
 		else
 			process_pkts_outbound(&qconf->outbound, &traffic);
@@ -1169,7 +1174,7 @@ main_loop(__attribute__((unused)) void *dummy)
 					pkts, MAX_PKT_BURST);
 
 			if (nb_rx > 0)
-				process_pkts(qconf, pkts, nb_rx, portid);
+				process_pkts(qconf, &rxql[i], pkts, nb_rx);
 
 			/* dequeue and process completed crypto-ops */
 			if (UNPROTECTED_PORT(portid))
@@ -1709,6 +1714,8 @@ add_mapping(struct rte_hash *map, const char *str, uint16_t cdev_id,
 	unsigned long i;
 	struct cdev_key key = { 0 };
 
+	key.port_id = params->port_id;
+	key.queue_id = params->queue_id;
 	key.lcore_id = params->lcore_id;
 	if (cipher)
 		key.cipher_algo = cipher->sym.cipher.algo;
@@ -1722,7 +1729,9 @@ add_mapping(struct rte_hash *map, const char *str, uint16_t cdev_id,
 		return 0;
 
 	for (i = 0; i < ipsec_ctx->nb_qps; i++)
-		if (ipsec_ctx->tbl[i].id == cdev_id)
+		if (ipsec_ctx->tbl[i].id == cdev_id &&
+		    ipsec_ctx->tbl[i].port_id == key.port_id &&
+		    ipsec_ctx->tbl[i].port_queue_id == key.queue_id)
 			break;
 
 	if (i == ipsec_ctx->nb_qps) {
@@ -1733,9 +1742,12 @@ add_mapping(struct rte_hash *map, const char *str, uint16_t cdev_id,
 		}
 		ipsec_ctx->tbl[i].id = cdev_id;
 		ipsec_ctx->tbl[i].qp = qp;
+		ipsec_ctx->tbl[i].port_id = key.port_id;
+		ipsec_ctx->tbl[i].port_queue_id = key.queue_id;
 		ipsec_ctx->nb_qps++;
-		printf("%s cdev mapping: lcore %u using cdev %u qp %u "
-				"(cdev_id_qp %lu)\n", str, key.lcore_id,
+		printf("%s cdev mapping: lcore %u, portid %u, queueid %u "
+				"using cdev %u qp %u (cdev_id_qp %lu)\n",
+				str, key.lcore_id, key.port_id, key.queue_id,
 				cdev_id, qp, i);
 	}
 
@@ -1849,7 +1861,7 @@ cryptodevs_init(void)
 		rte_panic("Failed to create cdev_map hash table, errno = %d\n",
 				rte_errno);
 
-	printf("lcore/cryptodev/qp mappings:\n");
+	printf("lcore/portid/queueid/cryptodev/qp mappings:\n");
 
 	idx = 0;
 	for (cdev_id = 0; cdev_id < rte_cryptodev_count(); cdev_id++) {
diff --git a/examples/ipsec-secgw/ipsec.c b/examples/ipsec-secgw/ipsec.c
index d4b5712..68059d8 100644
--- a/examples/ipsec-secgw/ipsec.c
+++ b/examples/ipsec-secgw/ipsec.c
@@ -63,6 +63,8 @@ create_lookaside_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa,
 	struct cdev_key key = { 0 };
 
 	key.lcore_id = (uint8_t)rte_lcore_id();
+	key.port_id = ipsec_ctx->port_id;
+	key.queue_id = ipsec_ctx->queue_id;
 
 	key.cipher_algo = (uint8_t)sa->cipher_algo;
 	key.auth_algo = (uint8_t)sa->auth_algo;
@@ -72,12 +74,11 @@ create_lookaside_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa,
 			(void **)&cdev_id_qp);
 	if (ret < 0) {
 		RTE_LOG(ERR, IPSEC,
-				"No cryptodev: core %u, cipher_algo %u, "
-				"auth_algo %u, aead_algo %u\n",
-				key.lcore_id,
-				key.cipher_algo,
-				key.auth_algo,
-				key.aead_algo);
+				"No cryptodev: core %u, port_id %u, "
+				"queue_id %u, cipher_algo %u, auth_algo %u, "
+				"aead_algo %u\n",
+				key.lcore_id, key.port_id, key.queue_id,
+				key.cipher_algo, key.auth_algo, key.aead_algo);
 		return -1;
 	}
 
diff --git a/examples/ipsec-secgw/ipsec.h b/examples/ipsec-secgw/ipsec.h
index 8e07521..b76cb50 100644
--- a/examples/ipsec-secgw/ipsec.h
+++ b/examples/ipsec-secgw/ipsec.h
@@ -180,6 +180,8 @@ struct cdev_qp {
 	uint16_t qp;
 	uint16_t in_flight;
 	uint16_t len;
+	uint16_t port_id;
+	uint16_t port_queue_id;
 	struct rte_crypto_op *buf[MAX_PKT_BURST] __rte_aligned(sizeof(void *));
 };
 
@@ -197,10 +199,15 @@ struct ipsec_ctx {
 	uint16_t ol_pkts_cnt;
 	uint64_t ipv4_offloads;
 	uint64_t ipv6_offloads;
+	/* port_id and queue_id are used to select crypto qp */
+	uint16_t port_id;
+	uint16_t queue_id;
 };
 
 struct cdev_key {
-	uint16_t lcore_id;
+	uint16_t port_id;
+	uint8_t queue_id;
+	uint8_t lcore_id;
 	uint8_t cipher_algo;
 	uint8_t auth_algo;
 	uint8_t aead_algo;
-- 
2.7.4


  parent reply	other threads:[~2020-01-30 16:39 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-10 14:46 [dpdk-dev] [PATCH] " Anoob Joseph
2020-01-29 22:12 ` Ananyev, Konstantin
2020-01-30 16:28   ` Anoob Joseph
2020-01-31 16:32     ` Ananyev, Konstantin
2020-01-31 17:04       ` Anoob Joseph
2020-01-31 18:49         ` Ananyev, Konstantin
2020-02-03  9:05           ` Anoob Joseph
2020-02-03  9:15             ` Akhil Goyal
2020-02-03  9:22               ` Anoob Joseph
2020-02-06 10:46                 ` Anoob Joseph
2020-02-06 11:30                   ` Akhil Goyal
2020-02-06 11:32                   ` Thomas Monjalon
2020-01-30 16:38 ` Anoob Joseph [this message]
2020-01-31 17:39   ` [dpdk-dev] [PATCH v2] " Ananyev, Konstantin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1580402318-3307-1-git-send-email-anoobj@marvell.com \
    --to=anoobj@marvell.com \
    --cc=akhil.goyal@nxp.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=lbartosik@marvell.com \
    --cc=pathreya@marvell.com \
    --cc=radu.nicolau@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).