From: Anoob Joseph <anoobj@marvell.com>
To: Akhil Goyal <akhil.goyal@nxp.com>,
Declan Doherty <declan.doherty@intel.com>,
Thomas Monjalon <thomas@monjalon.net>
Cc: Anoob Joseph <anoobj@marvell.com>,
Jerin Jacob <jerinj@marvell.com>,
Narayana Prasad <pathreya@marvell.com>,
Kiran Kumar K <kirankumark@marvell.com>,
Nithin Dabilpuram <ndabilpuram@marvell.com>,
"Pavan Nikhilesh" <pbhagavatula@marvell.com>,
Ankur Dwivedi <adwivedi@marvell.com>,
Archana Muniganti <marchana@marvell.com>,
Tejasree Kondoj <ktejasree@marvell.com>,
Vamsi Attunuru <vattunuru@marvell.com>,
"Lukasz Bartosik" <lbartosik@marvell.com>, <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v4 07/15] crypto/octeontx2: enable CPT to share QP with ethdev
Date: Tue, 4 Feb 2020 16:47:17 +0530 [thread overview]
Message-ID: <1580815045-32132-8-git-send-email-anoobj@marvell.com> (raw)
In-Reply-To: <1580815045-32132-1-git-send-email-anoobj@marvell.com>
Adding the infrastructure to save one opaque pointer in idev and
implement the consumer-producer in the PMDs which uses it accordingly.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
---
drivers/common/octeontx2/otx2_sec_idev.c | 92 ++++++++++++++++++++++
drivers/common/octeontx2/otx2_sec_idev.h | 21 +++++
.../octeontx2/rte_common_octeontx2_version.map | 3 +
.../crypto/octeontx2/otx2_cryptodev_hw_access.h | 22 +-----
drivers/crypto/octeontx2/otx2_cryptodev_ops.c | 17 ++++
drivers/crypto/octeontx2/otx2_cryptodev_qp.h | 35 ++++++++
drivers/net/octeontx2/otx2_ethdev_sec.c | 9 +++
7 files changed, 178 insertions(+), 21 deletions(-)
create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev_qp.h
diff --git a/drivers/common/octeontx2/otx2_sec_idev.c b/drivers/common/octeontx2/otx2_sec_idev.c
index 532abde..e924078 100644
--- a/drivers/common/octeontx2/otx2_sec_idev.c
+++ b/drivers/common/octeontx2/otx2_sec_idev.c
@@ -2,12 +2,16 @@
* Copyright(C) 2020 Marvell International Ltd.
*/
+#include <rte_atomic.h>
#include <rte_bus_pci.h>
#include <rte_ethdev.h>
+#include <rte_spinlock.h>
#include "otx2_common.h"
#include "otx2_sec_idev.h"
+static struct otx2_sec_idev_cfg sec_cfg[OTX2_MAX_INLINE_PORTS];
+
/**
* @internal
* Check if rte_eth_dev is security offload capable otx2_eth_dev
@@ -26,3 +30,91 @@ otx2_eth_dev_is_sec_capable(struct rte_eth_dev *eth_dev)
return 0;
}
+
+int
+otx2_sec_idev_cfg_init(int port_id)
+{
+ struct otx2_sec_idev_cfg *cfg;
+ int i;
+
+ cfg = &sec_cfg[port_id];
+ cfg->tx_cpt_idx = 0;
+ rte_spinlock_init(&cfg->tx_cpt_lock);
+
+ for (i = 0; i < OTX2_MAX_CPT_QP_PER_PORT; i++) {
+ cfg->tx_cpt[i].qp = NULL;
+ rte_atomic16_set(&cfg->tx_cpt[i].ref_cnt, 0);
+ }
+
+ return 0;
+}
+
+int
+otx2_sec_idev_tx_cpt_qp_add(uint16_t port_id, struct otx2_cpt_qp *qp)
+{
+ struct otx2_sec_idev_cfg *cfg;
+ int i, ret;
+
+ if (qp == NULL || port_id > OTX2_MAX_INLINE_PORTS)
+ return -EINVAL;
+
+ cfg = &sec_cfg[port_id];
+
+ /* Find a free slot to save CPT LF */
+
+ rte_spinlock_lock(&cfg->tx_cpt_lock);
+
+ for (i = 0; i < OTX2_MAX_CPT_QP_PER_PORT; i++) {
+ if (cfg->tx_cpt[i].qp == NULL) {
+ cfg->tx_cpt[i].qp = qp;
+ ret = 0;
+ goto unlock;
+ }
+ }
+
+ ret = -EINVAL;
+
+unlock:
+ rte_spinlock_unlock(&cfg->tx_cpt_lock);
+ return ret;
+}
+
+int
+otx2_sec_idev_tx_cpt_qp_remove(struct otx2_cpt_qp *qp)
+{
+ struct otx2_sec_idev_cfg *cfg;
+ uint16_t port_id;
+ int i, ret;
+
+ if (qp == NULL)
+ return -EINVAL;
+
+ for (port_id = 0; port_id < OTX2_MAX_INLINE_PORTS; port_id++) {
+ cfg = &sec_cfg[port_id];
+
+ rte_spinlock_lock(&cfg->tx_cpt_lock);
+
+ for (i = 0; i < OTX2_MAX_CPT_QP_PER_PORT; i++) {
+ if (cfg->tx_cpt[i].qp != qp)
+ continue;
+
+ /* Don't free if the QP is in use by any sec session */
+ if (rte_atomic16_read(&cfg->tx_cpt[i].ref_cnt)) {
+ ret = -EBUSY;
+ } else {
+ cfg->tx_cpt[i].qp = NULL;
+ ret = 0;
+ }
+
+ goto unlock;
+ }
+
+ rte_spinlock_unlock(&cfg->tx_cpt_lock);
+ }
+
+ return -ENOENT;
+
+unlock:
+ rte_spinlock_unlock(&cfg->tx_cpt_lock);
+ return ret;
+}
diff --git a/drivers/common/octeontx2/otx2_sec_idev.h b/drivers/common/octeontx2/otx2_sec_idev.h
index a5d929e..20d71d0 100644
--- a/drivers/common/octeontx2/otx2_sec_idev.h
+++ b/drivers/common/octeontx2/otx2_sec_idev.h
@@ -7,6 +7,27 @@
#include <rte_ethdev.h>
+#define OTX2_MAX_CPT_QP_PER_PORT 64
+#define OTX2_MAX_INLINE_PORTS 64
+
+struct otx2_cpt_qp;
+
+struct otx2_sec_idev_cfg {
+ struct {
+ struct otx2_cpt_qp *qp;
+ rte_atomic16_t ref_cnt;
+ } tx_cpt[OTX2_MAX_CPT_QP_PER_PORT];
+
+ uint16_t tx_cpt_idx;
+ rte_spinlock_t tx_cpt_lock;
+};
+
uint8_t otx2_eth_dev_is_sec_capable(struct rte_eth_dev *eth_dev);
+int otx2_sec_idev_cfg_init(int port_id);
+
+int otx2_sec_idev_tx_cpt_qp_add(uint16_t port_id, struct otx2_cpt_qp *qp);
+
+int otx2_sec_idev_tx_cpt_qp_remove(struct otx2_cpt_qp *qp);
+
#endif /* _OTX2_SEC_IDEV_H_ */
diff --git a/drivers/common/octeontx2/rte_common_octeontx2_version.map b/drivers/common/octeontx2/rte_common_octeontx2_version.map
index 724fa35..775aca8 100644
--- a/drivers/common/octeontx2/rte_common_octeontx2_version.map
+++ b/drivers/common/octeontx2/rte_common_octeontx2_version.map
@@ -28,6 +28,9 @@ DPDK_20.0 {
otx2_npa_pf_func_get;
otx2_npa_set_defaults;
otx2_register_irq;
+ otx2_sec_idev_cfg_init;
+ otx2_sec_idev_tx_cpt_qp_add;
+ otx2_sec_idev_tx_cpt_qp_remove;
otx2_sso_pf_func_get;
otx2_sso_pf_func_set;
otx2_unregister_irq;
diff --git a/drivers/crypto/octeontx2/otx2_cryptodev_hw_access.h b/drivers/crypto/octeontx2/otx2_cryptodev_hw_access.h
index 6f78aa4..43db6a6 100644
--- a/drivers/crypto/octeontx2/otx2_cryptodev_hw_access.h
+++ b/drivers/crypto/octeontx2/otx2_cryptodev_hw_access.h
@@ -15,6 +15,7 @@
#include "cpt_mcode_defines.h"
#include "otx2_dev.h"
+#include "otx2_cryptodev_qp.h"
/* CPT instruction queue length */
#define OTX2_CPT_IQ_LEN 8200
@@ -135,27 +136,6 @@ enum cpt_9x_comp_e {
CPT_9X_COMP_E_LAST_ENTRY = 0x06
};
-struct otx2_cpt_qp {
- uint32_t id;
- /**< Queue pair id */
- uintptr_t base;
- /**< Base address where BAR is mapped */
- void *lmtline;
- /**< Address of LMTLINE */
- rte_iova_t lf_nq_reg;
- /**< LF enqueue register address */
- struct pending_queue pend_q;
- /**< Pending queue */
- struct rte_mempool *sess_mp;
- /**< Session mempool */
- struct rte_mempool *sess_mp_priv;
- /**< Session private data mempool */
- struct cpt_qp_meta_info meta_info;
- /**< Metabuf info required to support operations on the queue pair */
- rte_iova_t iq_dma_addr;
- /**< Instruction queue address */
-};
-
void otx2_cpt_err_intr_unregister(const struct rte_cryptodev *dev);
int otx2_cpt_err_intr_register(const struct rte_cryptodev *dev);
diff --git a/drivers/crypto/octeontx2/otx2_cryptodev_ops.c b/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
index 005b0a9..7eebb49 100644
--- a/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
+++ b/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
@@ -149,6 +149,11 @@ otx2_cpt_qp_inline_cfg(const struct rte_cryptodev *dev, struct otx2_cpt_qp *qp)
if (ret)
return ret;
+ /* Publish inline Tx QP to eth dev security */
+ ret = otx2_sec_idev_tx_cpt_qp_add(port_id, qp);
+ if (ret)
+ return ret;
+
return 0;
}
@@ -243,6 +248,12 @@ otx2_cpt_qp_create(const struct rte_cryptodev *dev, uint16_t qp_id,
qp->lf_nq_reg = qp->base + OTX2_CPT_LF_NQ(0);
+ ret = otx2_sec_idev_tx_cpt_qp_remove(qp);
+ if (ret && (ret != -ENOENT)) {
+ CPT_LOG_ERR("Could not delete inline configuration");
+ goto mempool_destroy;
+ }
+
otx2_cpt_iq_disable(qp);
ret = otx2_cpt_qp_inline_cfg(dev, qp);
@@ -276,6 +287,12 @@ otx2_cpt_qp_destroy(const struct rte_cryptodev *dev, struct otx2_cpt_qp *qp)
char name[RTE_MEMZONE_NAMESIZE];
int ret;
+ ret = otx2_sec_idev_tx_cpt_qp_remove(qp);
+ if (ret && (ret != -ENOENT)) {
+ CPT_LOG_ERR("Could not delete inline configuration");
+ return ret;
+ }
+
otx2_cpt_iq_disable(qp);
otx2_cpt_metabuf_mempool_destroy(qp);
diff --git a/drivers/crypto/octeontx2/otx2_cryptodev_qp.h b/drivers/crypto/octeontx2/otx2_cryptodev_qp.h
new file mode 100644
index 0000000..9d48da4
--- /dev/null
+++ b/drivers/crypto/octeontx2/otx2_cryptodev_qp.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#ifndef _OTX2_CRYPTODEV_QP_H_
+#define _OTX2_CRYPTODEV_QP_H_
+
+#include <rte_common.h>
+#include <rte_mempool.h>
+#include <rte_spinlock.h>
+
+#include "cpt_common.h"
+
+struct otx2_cpt_qp {
+ uint32_t id;
+ /**< Queue pair id */
+ uintptr_t base;
+ /**< Base address where BAR is mapped */
+ void *lmtline;
+ /**< Address of LMTLINE */
+ rte_iova_t lf_nq_reg;
+ /**< LF enqueue register address */
+ struct pending_queue pend_q;
+ /**< Pending queue */
+ struct rte_mempool *sess_mp;
+ /**< Session mempool */
+ struct rte_mempool *sess_mp_priv;
+ /**< Session private data mempool */
+ struct cpt_qp_meta_info meta_info;
+ /**< Metabuf info required to support operations on the queue pair */
+ rte_iova_t iq_dma_addr;
+ /**< Instruction queue address */
+};
+
+#endif /* _OTX2_CRYPTODEV_QP_H_ */
diff --git a/drivers/net/octeontx2/otx2_ethdev_sec.c b/drivers/net/octeontx2/otx2_ethdev_sec.c
index d0b2dba..8859042 100644
--- a/drivers/net/octeontx2/otx2_ethdev_sec.c
+++ b/drivers/net/octeontx2/otx2_ethdev_sec.c
@@ -10,9 +10,11 @@
#include <rte_security.h>
#include <rte_security_driver.h>
+#include "otx2_cryptodev_qp.h"
#include "otx2_ethdev.h"
#include "otx2_ethdev_sec.h"
#include "otx2_ipsec_fp.h"
+#include "otx2_sec_idev.h"
#define ETH_SEC_MAX_PKT_LEN 1450
@@ -160,12 +162,19 @@ int
otx2_eth_sec_ctx_create(struct rte_eth_dev *eth_dev)
{
struct rte_security_ctx *ctx;
+ int ret;
ctx = rte_malloc("otx2_eth_sec_ctx",
sizeof(struct rte_security_ctx), 0);
if (ctx == NULL)
return -ENOMEM;
+ ret = otx2_sec_idev_cfg_init(eth_dev->data->port_id);
+ if (ret) {
+ rte_free(ctx);
+ return ret;
+ }
+
/* Populate ctx */
ctx->device = eth_dev;
--
2.7.4
next prev parent reply other threads:[~2020-02-04 11:19 UTC|newest]
Thread overview: 111+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-08 11:54 [dpdk-dev] [PATCH 00/15] add OCTEONTX2 inline IPsec support Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 01/15] common/octeontx2: add CPT LF mbox for inline inbound Anoob Joseph
2019-12-09 7:38 ` Jerin Jacob
2019-12-08 11:54 ` [dpdk-dev] [PATCH 02/15] common/octeontx2: add routine to check if rte_eth_dev belongs to otx2 Anoob Joseph
2019-12-09 7:42 ` Jerin Jacob
2019-12-08 11:54 ` [dpdk-dev] [PATCH 03/15] crypto/octeontx2: configure for inline IPsec Anoob Joseph
2019-12-09 7:46 ` Jerin Jacob
2019-12-09 7:52 ` [dpdk-dev] [EXT] " Anoob Joseph
2019-12-09 7:53 ` Jerin Jacob
2019-12-08 11:54 ` [dpdk-dev] [PATCH 04/15] crypto/octeontx2: create eth security ctx Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 05/15] crypto/octeontx2: add security in eth dev configure Anoob Joseph
2019-12-09 7:51 ` Jerin Jacob
2019-12-09 8:03 ` Anoob Joseph
2019-12-09 8:04 ` Jerin Jacob
2019-12-08 11:54 ` [dpdk-dev] [PATCH 06/15] crypto/octeontx2: add eth security capabilities Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 07/15] crypto/octeontx2: enable CPT to share QP with ethdev Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 08/15] crypto/octeontx2: add eth security session operations Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 09/15] crypto/octeontx2: add datapath ops in eth security ctx Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 10/15] crypto/octeontx2: add lookup mem changes to hold sa indices Anoob Joseph
2019-12-09 8:02 ` Jerin Jacob
2019-12-13 7:12 ` [dpdk-dev] [EXT] " Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 11/15] net/octeontx2: add inline ipsec rx path changes Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 12/15] drivers/octeontx2: add sec in compiler optimized RX fastpath framework Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 13/15] drivers/octeontx2: add sec in compiler optimized TX " Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 14/15] crypto/octeontx2: add inline tx path changes Anoob Joseph
2019-12-14 15:42 ` Gavin Hu (Arm Technology China)
2019-12-08 11:54 ` [dpdk-dev] [PATCH 15/15] crypto/octeontx2: sync inline tag type cfg with Rx adapter configuration Anoob Joseph
2019-12-09 8:06 ` [dpdk-dev] [PATCH 00/15] add OCTEONTX2 inline IPsec support Jerin Jacob
2019-12-10 22:54 ` Thomas Monjalon
2019-12-13 7:41 ` [dpdk-dev] [EXT] " Anoob Joseph
2019-12-13 10:18 ` Thomas Monjalon
2020-01-18 10:48 ` [dpdk-dev] [PATCH v2 " Anoob Joseph
2020-01-18 10:48 ` [dpdk-dev] [PATCH v2 01/15] common/octeontx2: add CPT LF mbox for inline inbound Anoob Joseph
2020-01-18 14:34 ` Jerin Jacob
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 02/15] common/octeontx2: add routine to check if sec capable otx2 Anoob Joseph
2020-01-18 14:35 ` Jerin Jacob
2020-01-27 7:01 ` Akhil Goyal
2020-01-27 8:02 ` Anoob Joseph
2020-01-27 8:12 ` Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 03/15] crypto/octeontx2: configure for inline IPsec Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 04/15] crypto/octeontx2: create eth security ctx Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 05/15] crypto/octeontx2: add security in eth dev configure Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 06/15] crypto/octeontx2: add eth security capabilities Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 07/15] crypto/octeontx2: enable CPT to share QP with ethdev Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 08/15] crypto/octeontx2: add eth security session operations Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 09/15] crypto/octeontx2: add datapath ops in eth security ctx Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 10/15] crypto/octeontx2: add lookup mem changes to hold sa indices Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 11/15] net/octeontx2: add inline ipsec rx path changes Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 12/15] drivers/octeontx2: add sec in compiler optimized RX fastpath framework Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 13/15] drivers/octeontx2: add sec in compiler optimized TX " Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 14/15] crypto/octeontx2: add inline tx path changes Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 15/15] crypto/octeontx2: sync inline tag type cfg with Rx adapter configuration Anoob Joseph
2020-01-18 14:38 ` [dpdk-dev] [PATCH v2 00/15] add OCTEONTX2 inline IPsec support Jerin Jacob
2020-01-19 10:43 ` Anoob Joseph
2020-01-19 10:53 ` Thomas Monjalon
2020-01-19 10:57 ` [dpdk-dev] [EXT] " Anoob Joseph
2020-01-22 10:16 ` [dpdk-dev] " Akhil Goyal
2020-01-22 10:55 ` Anoob Joseph
2020-01-22 12:56 ` Akhil Goyal
2020-01-22 14:18 ` Jerin Jacob
2020-01-27 2:55 ` [dpdk-dev] [EXT] " Anoob Joseph
2020-01-27 10:40 ` [dpdk-dev] " Akhil Goyal
2020-01-27 11:25 ` Jerin Jacob
2020-01-27 11:47 ` Akhil Goyal
2020-01-27 14:54 ` Anoob Joseph
2020-01-28 8:29 ` Jerin Jacob
2020-01-28 8:38 ` Akhil Goyal
2020-01-28 8:56 ` Jerin Jacob
2020-01-28 17:28 ` Ferruh Yigit
2020-01-29 4:01 ` [dpdk-dev] [EXT] " Anoob Joseph
2020-01-28 17:27 ` [dpdk-dev] " Ferruh Yigit
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 00/15] add OCTEON TX2 " Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 01/15] common/octeontx2: add CPT LF mbox for inline inbound Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 02/15] common/octeontx2: add routine to check if sec capable otx2 Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 03/15] crypto/octeontx2: configure for inline IPsec Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 04/15] net/octeontx2: create eth security ctx Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 05/15] net/octeontx2: add security in eth dev configure Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 06/15] net/octeontx2: add eth security capabilities Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 07/15] crypto/octeontx2: enable CPT to share QP with ethdev Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 08/15] net/octeontx2: add eth security session operations Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 09/15] net/octeontx2: add datapath ops in eth security ctx Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 10/15] net/octeontx2: add lookup mem changes to hold sa indices Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 11/15] net/octeontx2: add inline ipsec Rx path changes Anoob Joseph
2020-01-31 13:39 ` Akhil Goyal
2020-01-31 15:05 ` Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 12/15] drivers/octeontx2: add sec in Rx fastpath framework Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 13/15] drivers/octeontx2: add sec in Tx " Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 14/15] net/octeontx2: add inline Tx path changes Anoob Joseph
2020-01-31 13:36 ` Akhil Goyal
2020-01-31 15:33 ` Anoob Joseph
2020-02-01 9:35 ` Anoob Joseph
2020-02-03 13:25 ` Akhil Goyal
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 15/15] net/octeontx2: sync inline tag type Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 00/15] add OCTEON TX2 inline IPsec support Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 01/15] common/octeontx2: add CPT LF mbox for inline inbound Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 02/15] common/octeontx2: add routine to check if sec capable otx2 Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 03/15] crypto/octeontx2: configure for inline IPsec Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 04/15] net/octeontx2: create eth security ctx Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 05/15] net/octeontx2: add security in eth dev configure Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 06/15] net/octeontx2: add eth security capabilities Anoob Joseph
2020-02-04 11:17 ` Anoob Joseph [this message]
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 08/15] net/octeontx2: add eth security session operations Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 09/15] net/octeontx2: add datapath ops in eth security ctx Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 10/15] net/octeontx2: add lookup mem changes to hold sa indices Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 11/15] net/octeontx2: add inline ipsec Rx path changes Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 12/15] drivers/octeontx2: add sec in Rx fastpath framework Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 13/15] drivers/octeontx2: add sec in Tx " Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 14/15] net/octeontx2: add inline Tx path changes Anoob Joseph
2020-02-05 23:19 ` Thomas Monjalon
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 15/15] net/octeontx2: sync inline tag type Anoob Joseph
2020-02-04 16:10 ` [dpdk-dev] [PATCH v4 00/15] add OCTEON TX2 inline IPsec support Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1580815045-32132-8-git-send-email-anoobj@marvell.com \
--to=anoobj@marvell.com \
--cc=adwivedi@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=kirankumark@marvell.com \
--cc=ktejasree@marvell.com \
--cc=lbartosik@marvell.com \
--cc=marchana@marvell.com \
--cc=ndabilpuram@marvell.com \
--cc=pathreya@marvell.com \
--cc=pbhagavatula@marvell.com \
--cc=thomas@monjalon.net \
--cc=vattunuru@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).