From: Harman Kalra <hkalra@marvell.com>
To: Jerin Jacob <jerinj@marvell.com>, Maciej Czekaj <mczekaj@marvell.com>
Cc: <dev@dpdk.org>, Harman Kalra <hkalra@marvell.com>
Subject: [dpdk-dev] [PATCH] net/thunderx: add link up and down ops
Date: Wed, 5 Feb 2020 14:56:33 +0530 [thread overview]
Message-ID: <1580894793-6394-1-git-send-email-hkalra@marvell.com> (raw)
Add support for .set_link_up/down() eth ops to bring
link up and down.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
---
drivers/net/thunderx/base/nicvf_mbox.c | 10 ++++++++
drivers/net/thunderx/base/nicvf_mbox.h | 10 ++++++++
drivers/net/thunderx/nicvf_ethdev.c | 33 ++++++++++++++++++++++++++
3 files changed, 53 insertions(+)
diff --git a/drivers/net/thunderx/base/nicvf_mbox.c b/drivers/net/thunderx/base/nicvf_mbox.c
index 8f83d41dd..5b3ab939d 100644
--- a/drivers/net/thunderx/base/nicvf_mbox.c
+++ b/drivers/net/thunderx/base/nicvf_mbox.c
@@ -413,6 +413,16 @@ nicvf_mbox_reset_stat_counters(struct nicvf *nic, uint16_t rx_stat_mask,
return nicvf_mbox_send_msg_to_pf(nic, &mbx);
}
+int
+nicvf_mbox_set_link_up_down(struct nicvf *nic, bool enable)
+{
+ struct nic_mbx mbx = { .msg = { 0 } };
+
+ mbx.lbk.msg = NIC_MBOX_MSG_SET_LINK;
+ mbx.lbk.vf_id = nic->vf_id;
+ mbx.lbk.enable = enable;
+ return nicvf_mbox_send_msg_to_pf(nic, &mbx);
+}
void
nicvf_mbox_shutdown(struct nicvf *nic)
{
diff --git a/drivers/net/thunderx/base/nicvf_mbox.h b/drivers/net/thunderx/base/nicvf_mbox.h
index 81f1f4083..d0b294362 100644
--- a/drivers/net/thunderx/base/nicvf_mbox.h
+++ b/drivers/net/thunderx/base/nicvf_mbox.h
@@ -40,6 +40,7 @@
#define NIC_MBOX_MSG_ALLOC_SQS 0x12 /* Allocate secondary Qset */
#define NIC_MBOX_MSG_LOOPBACK 0x16 /* Set interface in loopback */
#define NIC_MBOX_MSG_RESET_STAT_COUNTER 0x17 /* Reset statistics counters */
+#define NIC_MBOX_MSG_SET_LINK 0x21 /* Set link up/down */
#define NIC_MBOX_MSG_CFG_DONE 0xF0 /* VF configuration done */
#define NIC_MBOX_MSG_SHUTDOWN 0xF1 /* VF is being shutdown */
#define NIC_MBOX_MSG_MAX 0x100 /* Maximum number of messages */
@@ -169,6 +170,13 @@ struct reset_stat_cfg {
uint16_t sq_stat_mask;
};
+/* Set link up/down */
+struct set_link_state {
+ uint8_t msg;
+ uint8_t vf_id;
+ bool enable;
+};
+
struct nic_mbx {
/* 128 bit shared memory between PF and each VF */
union {
@@ -186,6 +194,7 @@ union {
struct sqs_alloc sqs_alloc;
struct set_loopback lbk;
struct reset_stat_cfg reset_stat;
+ struct set_link_state set_link;
};
};
@@ -210,6 +219,7 @@ int nicvf_mbox_rq_sync(struct nicvf *nic);
int nicvf_mbox_loopback_config(struct nicvf *nic, bool enable);
int nicvf_mbox_reset_stat_counters(struct nicvf *nic, uint16_t rx_stat_mask,
uint8_t tx_stat_mask, uint16_t rq_stat_mask, uint16_t sq_stat_mask);
+int nicvf_mbox_set_link_up_down(struct nicvf *nic, bool enable);
void nicvf_mbox_shutdown(struct nicvf *nic);
void nicvf_mbox_cfg_done(struct nicvf *nic);
diff --git a/drivers/net/thunderx/nicvf_ethdev.c b/drivers/net/thunderx/nicvf_ethdev.c
index 2cf0ffe13..6f43541a5 100644
--- a/drivers/net/thunderx/nicvf_ethdev.c
+++ b/drivers/net/thunderx/nicvf_ethdev.c
@@ -1988,6 +1988,37 @@ nicvf_dev_configure(struct rte_eth_dev *dev)
return 0;
}
+static int
+nicvf_dev_set_link_up(struct rte_eth_dev *dev)
+{
+ struct nicvf *nic = nicvf_pmd_priv(dev);
+ int rc, i;
+
+ rc = nicvf_mbox_set_link_up_down(nic, true);
+ if (rc)
+ goto done;
+
+ /* Start tx queues */
+ for (i = 0; i < dev->data->nb_tx_queues; i++)
+ nicvf_dev_tx_queue_start(dev, i);
+
+done:
+ return rc;
+}
+
+static int
+nicvf_dev_set_link_down(struct rte_eth_dev *dev)
+{
+ struct nicvf *nic = nicvf_pmd_priv(dev);
+ int i;
+
+ /* Stop tx queues */
+ for (i = 0; i < dev->data->nb_tx_queues; i++)
+ nicvf_dev_tx_queue_stop(dev, i);
+
+ return nicvf_mbox_set_link_up_down(nic, false);
+}
+
/* Initialize and register driver with DPDK Application */
static const struct eth_dev_ops nicvf_eth_dev_ops = {
.dev_configure = nicvf_dev_configure,
@@ -2015,6 +2046,8 @@ static const struct eth_dev_ops nicvf_eth_dev_ops = {
.rx_queue_count = nicvf_dev_rx_queue_count,
.tx_queue_setup = nicvf_dev_tx_queue_setup,
.tx_queue_release = nicvf_dev_tx_queue_release,
+ .dev_set_link_up = nicvf_dev_set_link_up,
+ .dev_set_link_down = nicvf_dev_set_link_down,
.get_reg = nicvf_dev_get_regs,
};
--
2.18.0
next reply other threads:[~2020-02-05 9:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-05 9:26 Harman Kalra [this message]
2020-02-27 11:34 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1580894793-6394-1-git-send-email-hkalra@marvell.com \
--to=hkalra@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=mczekaj@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).