From: Lukasz Bartosik <lbartosik@marvell.com>
To: Akhil Goyal <akhil.goyal@nxp.com>,
Radu Nicolau <radu.nicolau@intel.com>,
Thomas Monjalon <thomas@monjalon.net>
Cc: Jerin Jacob <jerinj@marvell.com>,
Narayana Prasad <pathreya@marvell.com>,
Ankur Dwivedi <adwivedi@marvell.com>,
Anoob Joseph <anoobj@marvell.com>,
Archana Muniganti <marchana@marvell.com>,
Tejasree Kondoj <ktejasree@marvell.com>,
Vamsi Attunuru <vattunuru@marvell.com>,
"Konstantin Ananyev" <konstantin.ananyev@intel.com>,
<dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v4 10/15] examples/ipsec-secgw: add eventmode to ipsec-secgw
Date: Thu, 20 Feb 2020 09:02:02 +0100 [thread overview]
Message-ID: <1582185727-6749-11-git-send-email-lbartosik@marvell.com> (raw)
In-Reply-To: <1582185727-6749-1-git-send-email-lbartosik@marvell.com>
Add eventmode support to ipsec-secgw. With the aid of event helper
configure and use the eventmode capabilities.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
---
examples/ipsec-secgw/event_helper.c | 3 +
examples/ipsec-secgw/event_helper.h | 14 ++
examples/ipsec-secgw/ipsec-secgw.c | 258 +++++++++++++++++++++++++++++++++++-
examples/ipsec-secgw/ipsec.h | 24 ++++
examples/ipsec-secgw/sa.c | 21 +--
examples/ipsec-secgw/sad.h | 5 -
6 files changed, 301 insertions(+), 24 deletions(-)
diff --git a/examples/ipsec-secgw/event_helper.c b/examples/ipsec-secgw/event_helper.c
index 0854fc2..076f1f2 100644
--- a/examples/ipsec-secgw/event_helper.c
+++ b/examples/ipsec-secgw/event_helper.c
@@ -960,6 +960,8 @@ eh_find_worker(uint32_t lcore_id, struct eh_conf *conf,
else
curr_conf.cap.burst = EH_RX_TYPE_NON_BURST;
+ curr_conf.cap.ipsec_mode = conf->ipsec_mode;
+
/* Parse the passed list and see if we have matching capabilities */
/* Initialize the pointer used to traverse the list */
@@ -1400,6 +1402,7 @@ eh_conf_init(void)
/* Packet transfer mode: poll */
conf->mode = EH_PKT_TRANSFER_MODE_POLL;
+ conf->ipsec_mode = EH_IPSEC_MODE_TYPE_APP;
/* Keep all ethernet ports enabled by default */
conf->eth_portmask = -1;
diff --git a/examples/ipsec-secgw/event_helper.h b/examples/ipsec-secgw/event_helper.h
index e17cab1..b65b343 100644
--- a/examples/ipsec-secgw/event_helper.h
+++ b/examples/ipsec-secgw/event_helper.h
@@ -73,6 +73,14 @@ enum eh_tx_types {
EH_TX_TYPE_NO_INTERNAL_PORT
};
+/**
+ * Event mode ipsec mode types
+ */
+enum eh_ipsec_mode_types {
+ EH_IPSEC_MODE_TYPE_APP = 0,
+ EH_IPSEC_MODE_TYPE_DRIVER
+};
+
/* Event dev params */
struct eventdev_params {
uint8_t eventdev_id;
@@ -182,6 +190,10 @@ struct eh_conf {
*/
void *mode_params;
/**< Mode specific parameters */
+
+ /** Application specific params */
+ enum eh_ipsec_mode_types ipsec_mode;
+ /**< Mode of ipsec run */
};
/* Workers registered by the application */
@@ -193,6 +205,8 @@ struct eh_app_worker_params {
/**< Specify status of rx type burst */
uint64_t tx_internal_port : 1;
/**< Specify whether tx internal port is available */
+ uint64_t ipsec_mode : 1;
+ /**< Specify ipsec processing level */
};
uint64_t u64;
} cap;
diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
index e1ee7c3..82915e2 100644
--- a/examples/ipsec-secgw/ipsec-secgw.c
+++ b/examples/ipsec-secgw/ipsec-secgw.c
@@ -2,6 +2,7 @@
* Copyright(c) 2016 Intel Corporation
*/
+#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
@@ -14,9 +15,11 @@
#include <sys/queue.h>
#include <stdarg.h>
#include <errno.h>
+#include <signal.h>
#include <getopt.h>
#include <rte_common.h>
+#include <rte_bitmap.h>
#include <rte_byteorder.h>
#include <rte_log.h>
#include <rte_eal.h>
@@ -41,13 +44,17 @@
#include <rte_jhash.h>
#include <rte_cryptodev.h>
#include <rte_security.h>
+#include <rte_eventdev.h>
#include <rte_ip.h>
#include <rte_ip_frag.h>
+#include "event_helper.h"
#include "ipsec.h"
#include "parser.h"
#include "sad.h"
+volatile bool force_quit;
+
#define RTE_LOGTYPE_IPSEC RTE_LOGTYPE_USER1
#define MAX_JUMBO_PKT_LEN 9600
@@ -134,12 +141,20 @@ struct flow_info flow_info_tbl[RTE_MAX_ETHPORTS];
#define CMD_LINE_OPT_CONFIG "config"
#define CMD_LINE_OPT_SINGLE_SA "single-sa"
#define CMD_LINE_OPT_CRYPTODEV_MASK "cryptodev_mask"
+#define CMD_LINE_OPT_TRANSFER_MODE "transfer-mode"
+#define CMD_LINE_OPT_SCHEDULE_TYPE "event-schedule-type"
#define CMD_LINE_OPT_RX_OFFLOAD "rxoffload"
#define CMD_LINE_OPT_TX_OFFLOAD "txoffload"
#define CMD_LINE_OPT_REASSEMBLE "reassemble"
#define CMD_LINE_OPT_MTU "mtu"
#define CMD_LINE_OPT_FRAG_TTL "frag-ttl"
+#define CMD_LINE_ARG_EVENT "event"
+#define CMD_LINE_ARG_POLL "poll"
+#define CMD_LINE_ARG_ORDERED "ordered"
+#define CMD_LINE_ARG_ATOMIC "atomic"
+#define CMD_LINE_ARG_PARALLEL "parallel"
+
enum {
/* long options mapped to a short option */
@@ -150,6 +165,8 @@ enum {
CMD_LINE_OPT_CONFIG_NUM,
CMD_LINE_OPT_SINGLE_SA_NUM,
CMD_LINE_OPT_CRYPTODEV_MASK_NUM,
+ CMD_LINE_OPT_TRANSFER_MODE_NUM,
+ CMD_LINE_OPT_SCHEDULE_TYPE_NUM,
CMD_LINE_OPT_RX_OFFLOAD_NUM,
CMD_LINE_OPT_TX_OFFLOAD_NUM,
CMD_LINE_OPT_REASSEMBLE_NUM,
@@ -161,6 +178,8 @@ static const struct option lgopts[] = {
{CMD_LINE_OPT_CONFIG, 1, 0, CMD_LINE_OPT_CONFIG_NUM},
{CMD_LINE_OPT_SINGLE_SA, 1, 0, CMD_LINE_OPT_SINGLE_SA_NUM},
{CMD_LINE_OPT_CRYPTODEV_MASK, 1, 0, CMD_LINE_OPT_CRYPTODEV_MASK_NUM},
+ {CMD_LINE_OPT_TRANSFER_MODE, 1, 0, CMD_LINE_OPT_TRANSFER_MODE_NUM},
+ {CMD_LINE_OPT_SCHEDULE_TYPE, 1, 0, CMD_LINE_OPT_SCHEDULE_TYPE_NUM},
{CMD_LINE_OPT_RX_OFFLOAD, 1, 0, CMD_LINE_OPT_RX_OFFLOAD_NUM},
{CMD_LINE_OPT_TX_OFFLOAD, 1, 0, CMD_LINE_OPT_TX_OFFLOAD_NUM},
{CMD_LINE_OPT_REASSEMBLE, 1, 0, CMD_LINE_OPT_REASSEMBLE_NUM},
@@ -1292,6 +1311,8 @@ print_usage(const char *prgname)
" --config (port,queue,lcore)[,(port,queue,lcore)]"
" [--single-sa SAIDX]"
" [--cryptodev_mask MASK]"
+ " [--transfer-mode MODE]"
+ " [--event-schedule-type TYPE]"
" [--" CMD_LINE_OPT_RX_OFFLOAD " RX_OFFLOAD_MASK]"
" [--" CMD_LINE_OPT_TX_OFFLOAD " TX_OFFLOAD_MASK]"
" [--" CMD_LINE_OPT_REASSEMBLE " REASSEMBLE_TABLE_SIZE]"
@@ -1315,6 +1336,14 @@ print_usage(const char *prgname)
" bypassing the SP\n"
" --cryptodev_mask MASK: Hexadecimal bitmask of the crypto\n"
" devices to configure\n"
+ " --transfer-mode MODE\n"
+ " \"poll\" : Packet transfer via polling (default)\n"
+ " \"event\" : Packet transfer via event device\n"
+ " --event-schedule-type TYPE queue schedule type, used only when\n"
+ " transfer mode is set to event\n"
+ " \"ordered\" : Ordered (default)\n"
+ " \"atomic\" : Atomic\n"
+ " \"parallel\" : Parallel\n"
" --" CMD_LINE_OPT_RX_OFFLOAD
": bitmask of the RX HW offload capabilities to enable/use\n"
" (DEV_RX_OFFLOAD_*)\n"
@@ -1449,8 +1478,45 @@ print_app_sa_prm(const struct app_sa_prm *prm)
printf("Frag TTL: %" PRIu64 " ns\n", frag_ttl_ns);
}
+static int
+parse_transfer_mode(struct eh_conf *conf, const char *optarg)
+{
+ if (!strcmp(CMD_LINE_ARG_POLL, optarg))
+ conf->mode = EH_PKT_TRANSFER_MODE_POLL;
+ else if (!strcmp(CMD_LINE_ARG_EVENT, optarg))
+ conf->mode = EH_PKT_TRANSFER_MODE_EVENT;
+ else {
+ printf("Unsupported packet transfer mode\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int
+parse_schedule_type(struct eh_conf *conf, const char *optarg)
+{
+ struct eventmode_conf *em_conf = NULL;
+
+ /* Get eventmode conf */
+ em_conf = conf->mode_params;
+
+ if (!strcmp(CMD_LINE_ARG_ORDERED, optarg))
+ em_conf->ext_params.sched_type = RTE_SCHED_TYPE_ORDERED;
+ else if (!strcmp(CMD_LINE_ARG_ATOMIC, optarg))
+ em_conf->ext_params.sched_type = RTE_SCHED_TYPE_ATOMIC;
+ else if (!strcmp(CMD_LINE_ARG_PARALLEL, optarg))
+ em_conf->ext_params.sched_type = RTE_SCHED_TYPE_PARALLEL;
+ else {
+ printf("Unsupported queue schedule type\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int32_t
-parse_args(int32_t argc, char **argv)
+parse_args(int32_t argc, char **argv, struct eh_conf *eh_conf)
{
int opt;
int64_t ret;
@@ -1548,6 +1614,7 @@ parse_args(int32_t argc, char **argv)
/* else */
single_sa = 1;
single_sa_idx = ret;
+ eh_conf->ipsec_mode = EH_IPSEC_MODE_TYPE_DRIVER;
printf("Configured with single SA index %u\n",
single_sa_idx);
break;
@@ -1562,6 +1629,25 @@ parse_args(int32_t argc, char **argv)
/* else */
enabled_cryptodev_mask = ret;
break;
+
+ case CMD_LINE_OPT_TRANSFER_MODE_NUM:
+ ret = parse_transfer_mode(eh_conf, optarg);
+ if (ret < 0) {
+ printf("Invalid packet transfer mode\n");
+ print_usage(prgname);
+ return -1;
+ }
+ break;
+
+ case CMD_LINE_OPT_SCHEDULE_TYPE_NUM:
+ ret = parse_schedule_type(eh_conf, optarg);
+ if (ret < 0) {
+ printf("Invalid queue schedule type\n");
+ print_usage(prgname);
+ return -1;
+ }
+ break;
+
case CMD_LINE_OPT_RX_OFFLOAD_NUM:
ret = parse_mask(optarg, &dev_rx_offload);
if (ret != 0) {
@@ -2476,16 +2562,117 @@ create_default_ipsec_flow(uint16_t port_id, uint64_t rx_offloads)
port_id);
}
+static void
+signal_handler(int signum)
+{
+ if (signum == SIGINT || signum == SIGTERM) {
+ printf("\n\nSignal %d received, preparing to exit...\n",
+ signum);
+ force_quit = true;
+ }
+}
+
+static void
+ev_mode_sess_verify(struct ipsec_sa *sa, int nb_sa)
+{
+ struct rte_ipsec_session *ips;
+ int32_t i;
+
+ if (!sa || !nb_sa)
+ return;
+
+ for (i = 0; i < nb_sa; i++) {
+ ips = ipsec_get_primary_session(&sa[i]);
+ if (ips->type != RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL)
+ rte_exit(EXIT_FAILURE, "Event mode supports only "
+ "inline protocol sessions\n");
+ }
+
+}
+
+static int32_t
+check_eh_conf(struct eh_conf *eh_conf)
+{
+ struct eventmode_conf *em_conf = NULL;
+
+ if (!eh_conf || !eh_conf->mode_params)
+ return -EINVAL;
+
+ /* Get eventmode conf */
+ em_conf = eh_conf->mode_params;
+
+ if (eh_conf->mode == EH_PKT_TRANSFER_MODE_POLL &&
+ em_conf->ext_params.sched_type != SCHED_TYPE_NOT_SET) {
+ printf("error: option --event-schedule-type applies only to "
+ "event mode\n");
+ return -EINVAL;
+ }
+
+ if (eh_conf->mode != EH_PKT_TRANSFER_MODE_EVENT)
+ return 0;
+
+ /* Set schedule type to ORDERED if it wasn't explicitly set by user */
+ if (em_conf->ext_params.sched_type == SCHED_TYPE_NOT_SET)
+ em_conf->ext_params.sched_type = RTE_SCHED_TYPE_ORDERED;
+
+ /*
+ * Event mode currently supports only inline protocol sessions.
+ * If there are other types of sessions configured then exit with
+ * error.
+ */
+ ev_mode_sess_verify(sa_in, nb_sa_in);
+ ev_mode_sess_verify(sa_out, nb_sa_out);
+
+ return 0;
+}
+
+static void
+inline_sessions_free(struct sa_ctx *sa_ctx)
+{
+ struct rte_ipsec_session *ips;
+ struct ipsec_sa *sa;
+ int32_t ret;
+ uint32_t i;
+
+ if (!sa_ctx)
+ return;
+
+ for (i = 0; i < sa_ctx->nb_sa; i++) {
+
+ sa = &sa_ctx->sa[i];
+ if (!sa->spi)
+ continue;
+
+ ips = ipsec_get_primary_session(sa);
+ if (ips->type != RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL &&
+ ips->type != RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO)
+ continue;
+
+ if (!rte_eth_dev_is_valid_port(sa->portid))
+ continue;
+
+ ret = rte_security_session_destroy(
+ rte_eth_dev_get_sec_ctx(sa->portid),
+ ips->security.ses);
+ if (ret)
+ RTE_LOG(ERR, IPSEC, "Failed to destroy security "
+ "session type %d, spi %d\n",
+ ips->type, sa->spi);
+ }
+}
+
int32_t
main(int32_t argc, char **argv)
{
int32_t ret;
uint32_t lcore_id;
+ uint32_t cdev_id;
uint32_t i;
uint8_t socket_id;
uint16_t portid;
uint64_t req_rx_offloads[RTE_MAX_ETHPORTS];
uint64_t req_tx_offloads[RTE_MAX_ETHPORTS];
+ struct eh_conf *eh_conf = NULL;
size_t sess_sz;
/* init EAL */
@@ -2495,8 +2682,17 @@ main(int32_t argc, char **argv)
argc -= ret;
argv += ret;
+ force_quit = false;
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
+
+ /* initialize event helper configuration */
+ eh_conf = eh_conf_init();
+ if (eh_conf == NULL)
+ rte_exit(EXIT_FAILURE, "Failed to init event helper config");
+
/* parse application arguments (after the EAL ones) */
- ret = parse_args(argc, argv);
+ ret = parse_args(argc, argv, eh_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid parameters\n");
@@ -2516,6 +2712,9 @@ main(int32_t argc, char **argv)
if (check_params() < 0)
rte_exit(EXIT_FAILURE, "check_params failed\n");
+ if (check_eh_conf(eh_conf) < 0)
+ rte_exit(EXIT_FAILURE, "check_eh_conf failed\n");
+
ret = init_lcore_rx_queues();
if (ret < 0)
rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n");
@@ -2555,6 +2754,18 @@ main(int32_t argc, char **argv)
cryptodevs_init();
+ /*
+ * Set the enabled port mask in helper config for use by helper
+ * sub-system. This will be used while initializing devices using
+ * helper sub-system.
+ */
+ eh_conf->eth_portmask = enabled_port_mask;
+
+ /* Initialize eventmode components */
+ ret = eh_devs_init(eh_conf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "eh_devs_init failed, err=%d\n", ret);
+
/* start ports */
RTE_ETH_FOREACH_DEV(portid) {
if ((enabled_port_mask & (1 << portid)) == 0)
@@ -2614,5 +2825,48 @@ main(int32_t argc, char **argv)
return -1;
}
+ /* Uninitialize eventmode components */
+ ret = eh_devs_uninit(eh_conf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "eh_devs_uninit failed, err=%d\n", ret);
+
+ /* Free eventmode configuration memory */
+ eh_conf_uninit(eh_conf);
+
+ /* Destroy inline inbound and outbound sessions */
+ for (i = 0; i < NB_SOCKETS && i < rte_socket_count(); i++) {
+ socket_id = rte_socket_id_by_idx(i);
+ inline_sessions_free(socket_ctx[socket_id].sa_in);
+ inline_sessions_free(socket_ctx[socket_id].sa_out);
+ }
+
+ for (cdev_id = 0; cdev_id < rte_cryptodev_count(); cdev_id++) {
+ printf("Closing cryptodev %d...", cdev_id);
+ rte_cryptodev_stop(cdev_id);
+ rte_cryptodev_close(cdev_id);
+ printf(" Done\n");
+ }
+
+ RTE_ETH_FOREACH_DEV(portid) {
+ if ((enabled_port_mask & (1 << portid)) == 0)
+ continue;
+
+ printf("Closing port %d...", portid);
+ if (flow_info_tbl[portid].rx_def_flow) {
+ struct rte_flow_error err;
+
+ ret = rte_flow_destroy(portid,
+ flow_info_tbl[portid].rx_def_flow, &err);
+ if (ret)
+ RTE_LOG(ERR, IPSEC, "Failed to destroy flow "
+ " for port %u, err msg: %s\n", portid,
+ err.message);
+ }
+ rte_eth_dev_stop(portid);
+ rte_eth_dev_close(portid);
+ printf(" Done\n");
+ }
+ printf("Bye...\n");
+
return 0;
}
diff --git a/examples/ipsec-secgw/ipsec.h b/examples/ipsec-secgw/ipsec.h
index 8f5d382..ec3d60b 100644
--- a/examples/ipsec-secgw/ipsec.h
+++ b/examples/ipsec-secgw/ipsec.h
@@ -159,6 +159,24 @@ struct ipsec_sa {
struct rte_security_session_conf sess_conf;
} __rte_cache_aligned;
+struct ipsec_xf {
+ struct rte_crypto_sym_xform a;
+ struct rte_crypto_sym_xform b;
+};
+
+struct ipsec_sad {
+ struct rte_ipsec_sad *sad_v4;
+ struct rte_ipsec_sad *sad_v6;
+};
+
+struct sa_ctx {
+ void *satbl; /* pointer to array of rte_ipsec_sa objects*/
+ struct ipsec_sad sad;
+ struct ipsec_xf *xf;
+ uint32_t nb_sa;
+ struct ipsec_sa sa[];
+};
+
struct ipsec_mbuf_metadata {
struct ipsec_sa *sa;
struct rte_crypto_op cop;
@@ -253,6 +271,12 @@ struct ipsec_traffic {
struct traffic_type ip6;
};
+extern struct ipsec_sa *sa_out;
+extern uint32_t nb_sa_out;
+
+extern struct ipsec_sa *sa_in;
+extern uint32_t nb_sa_in;
+
uint16_t
ipsec_inbound(struct ipsec_ctx *ctx, struct rte_mbuf *pkts[],
uint16_t nb_pkts, uint16_t len);
diff --git a/examples/ipsec-secgw/sa.c b/examples/ipsec-secgw/sa.c
index e75b687..29ea141 100644
--- a/examples/ipsec-secgw/sa.c
+++ b/examples/ipsec-secgw/sa.c
@@ -135,14 +135,14 @@ const struct supported_aead_algo aead_algos[] = {
#define SA_INIT_NB 128
-static struct ipsec_sa *sa_out;
+struct ipsec_sa *sa_out;
+uint32_t nb_sa_out;
static uint32_t sa_out_sz;
-static uint32_t nb_sa_out;
static struct ipsec_sa_cnt sa_out_cnt;
-static struct ipsec_sa *sa_in;
+struct ipsec_sa *sa_in;
+uint32_t nb_sa_in;
static uint32_t sa_in_sz;
-static uint32_t nb_sa_in;
static struct ipsec_sa_cnt sa_in_cnt;
static const struct supported_cipher_algo *
@@ -826,19 +826,6 @@ print_one_sa_rule(const struct ipsec_sa *sa, int inbound)
printf("\n");
}
-struct ipsec_xf {
- struct rte_crypto_sym_xform a;
- struct rte_crypto_sym_xform b;
-};
-
-struct sa_ctx {
- void *satbl; /* pointer to array of rte_ipsec_sa objects*/
- struct ipsec_sad sad;
- struct ipsec_xf *xf;
- uint32_t nb_sa;
- struct ipsec_sa sa[];
-};
-
static struct sa_ctx *
sa_create(const char *name, int32_t socket_id, uint32_t nb_sa)
{
diff --git a/examples/ipsec-secgw/sad.h b/examples/ipsec-secgw/sad.h
index 55712ba..473aaa9 100644
--- a/examples/ipsec-secgw/sad.h
+++ b/examples/ipsec-secgw/sad.h
@@ -18,11 +18,6 @@ struct ipsec_sad_cache {
RTE_DECLARE_PER_LCORE(struct ipsec_sad_cache, sad_cache);
-struct ipsec_sad {
- struct rte_ipsec_sad *sad_v4;
- struct rte_ipsec_sad *sad_v6;
-};
-
int ipsec_sad_create(const char *name, struct ipsec_sad *sad,
int socket_id, struct ipsec_sa_cnt *sa_cnt);
--
2.7.4
next prev parent reply other threads:[~2020-02-20 8:04 UTC|newest]
Thread overview: 147+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-08 12:30 [dpdk-dev] [PATCH 00/14] " Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 01/14] examples/ipsec-secgw: add default rte_flow for inline Rx Anoob Joseph
2019-12-16 14:20 ` Ananyev, Konstantin
2019-12-16 15:58 ` Anoob Joseph
2020-01-09 12:01 ` Lukas Bartosik
2020-01-09 19:09 ` Ananyev, Konstantin
2020-01-13 11:40 ` Ananyev, Konstantin
2019-12-08 12:30 ` [dpdk-dev] [PATCH 02/14] examples/ipsec-secgw: add framework for eventmode helper Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 03/14] examples/ipsec-secgw: add eventdev port-lcore link Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 04/14] examples/ipsec-secgw: add Rx adapter support Anoob Joseph
2019-12-11 11:33 ` Akhil Goyal
2019-12-12 5:18 ` Anoob Joseph
2019-12-23 18:48 ` Ananyev, Konstantin
2020-01-07 6:12 ` Anoob Joseph
2020-01-07 14:32 ` Ananyev, Konstantin
2019-12-08 12:30 ` [dpdk-dev] [PATCH 05/14] examples/ipsec-secgw: add Tx " Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 06/14] examples/ipsec-secgw: add routines to display config Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 07/14] examples/ipsec-secgw: add routines to launch workers Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 08/14] examples/ipsec-secgw: add support for internal ports Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 09/14] examples/ipsec-secgw: add eventmode to ipsec-secgw Anoob Joseph
2019-12-23 16:43 ` Ananyev, Konstantin
2020-01-03 10:18 ` Anoob Joseph
2020-01-06 15:45 ` Ananyev, Konstantin
2020-01-09 6:17 ` Anoob Joseph
2019-12-24 12:47 ` Ananyev, Konstantin
2020-01-03 10:20 ` Anoob Joseph
2020-01-06 16:50 ` Ananyev, Konstantin
2020-01-07 6:56 ` Anoob Joseph
2020-01-07 14:38 ` Ananyev, Konstantin
2019-12-08 12:30 ` [dpdk-dev] [PATCH 10/14] examples/ipsec-secgw: add app inbound worker Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 11/14] examples/ipsec-secgw: add app processing code Anoob Joseph
2019-12-23 16:49 ` Ananyev, Konstantin
2020-01-10 14:28 ` [dpdk-dev] [EXT] " Lukas Bartosik
2019-12-24 13:13 ` [dpdk-dev] " Ananyev, Konstantin
2020-01-10 14:36 ` [dpdk-dev] [EXT] " Lukas Bartosik
2019-12-25 15:18 ` [dpdk-dev] " Ananyev, Konstantin
2020-01-07 6:16 ` Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 12/14] examples/ipsec-secgw: add driver outbound worker Anoob Joseph
2019-12-23 17:28 ` Ananyev, Konstantin
2020-01-04 10:58 ` Anoob Joseph
2020-01-06 17:46 ` Ananyev, Konstantin
2020-01-07 4:32 ` Anoob Joseph
2020-01-07 14:30 ` Ananyev, Konstantin
2020-01-09 11:49 ` Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 13/14] examples/ipsec-secgw: add app " Anoob Joseph
2019-12-08 12:30 ` [dpdk-dev] [PATCH 14/14] examples/ipsec-secgw: add cmd line option for bufs Anoob Joseph
2019-12-23 16:14 ` Ananyev, Konstantin
2019-12-23 16:16 ` Ananyev, Konstantin
2020-01-03 5:42 ` Anoob Joseph
2020-01-06 15:21 ` Ananyev, Konstantin
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 00/12] add eventmode to ipsec-secgw Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 01/12] examples/ipsec-secgw: add default rte_flow for inline Rx Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 02/12] examples/ipsec-secgw: add framework for eventmode helper Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 03/12] examples/ipsec-secgw: add eventdev port-lcore link Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 04/12] examples/ipsec-secgw: add Rx adapter support Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 05/12] examples/ipsec-secgw: add Tx " Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 06/12] examples/ipsec-secgw: add routines to display config Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 07/12] examples/ipsec-secgw: add routines to launch workers Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 08/12] examples/ipsec-secgw: add support for internal ports Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 09/12] examples/ipsec-secgw: add eventmode to ipsec-secgw Anoob Joseph
2020-01-29 23:31 ` Ananyev, Konstantin
2020-01-30 11:04 ` [dpdk-dev] [EXT] " Lukas Bartosik
2020-01-30 11:13 ` Ananyev, Konstantin
2020-01-30 22:21 ` Ananyev, Konstantin
2020-01-31 1:09 ` Lukas Bartosik
2020-02-02 23:00 ` Lukas Bartosik
2020-02-03 7:50 ` Ananyev, Konstantin
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 10/12] examples/ipsec-secgw: add driver mode worker Anoob Joseph
2020-01-29 22:22 ` Ananyev, Konstantin
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 11/12] examples/ipsec-secgw: add app " Anoob Joseph
2020-01-29 15:34 ` Ananyev, Konstantin
2020-01-29 17:18 ` Anoob Joseph
2020-01-20 13:45 ` [dpdk-dev] [PATCH v2 12/12] examples/ipsec-secgw: add cmd line option for bufs Anoob Joseph
2020-01-29 14:40 ` Ananyev, Konstantin
2020-01-29 17:14 ` Anoob Joseph
2020-01-28 5:02 ` [dpdk-dev] [PATCH v2 00/12] add eventmode to ipsec-secgw Anoob Joseph
2020-01-28 13:00 ` Ananyev, Konstantin
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 00/13] " Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 01/13] examples/ipsec-secgw: add default rte flow for inline Rx Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 02/13] examples/ipsec-secgw: add framework for eventmode helper Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 03/13] examples/ipsec-secgw: add eventdev port-lcore link Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 04/13] examples/ipsec-secgw: add Rx adapter support Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 05/13] examples/ipsec-secgw: add Tx " Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 06/13] examples/ipsec-secgw: add routines to display config Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 07/13] examples/ipsec-secgw: add routines to launch workers Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 08/13] examples/ipsec-secgw: add support for internal ports Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 09/13] examples/ipsec-secgw: add event helper config init/uninit Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 10/13] examples/ipsec-secgw: add eventmode to ipsec-secgw Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 11/13] examples/ipsec-secgw: add driver mode worker Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 12/13] examples/ipsec-secgw: add app " Lukasz Bartosik
2020-02-04 13:58 ` [dpdk-dev] [PATCH v3 13/13] examples/ipsec-secgw: make number of buffers dynamic Lukasz Bartosik
2020-02-05 13:42 ` Ananyev, Konstantin
2020-02-05 16:08 ` [dpdk-dev] [EXT] " Lukas Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 00/15] add eventmode to ipsec-secgw Lukasz Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 01/15] examples/ipsec-secgw: add default rte flow for inline Rx Lukasz Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 02/15] examples/ipsec-secgw: add framework for eventmode helper Lukasz Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 03/15] examples/ipsec-secgw: add eventdev port-lcore link Lukasz Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 04/15] examples/ipsec-secgw: add Rx adapter support Lukasz Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 05/15] examples/ipsec-secgw: add Tx " Lukasz Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 06/15] examples/ipsec-secgw: add routines to display config Lukasz Bartosik
2020-02-20 8:01 ` [dpdk-dev] [PATCH v4 07/15] examples/ipsec-secgw: add routines to launch workers Lukasz Bartosik
2020-02-20 8:02 ` [dpdk-dev] [PATCH v4 08/15] examples/ipsec-secgw: add support for internal ports Lukasz Bartosik
2020-02-20 8:02 ` [dpdk-dev] [PATCH v4 09/15] examples/ipsec-secgw: add event helper config init/uninit Lukasz Bartosik
2020-02-20 8:02 ` Lukasz Bartosik [this message]
2020-02-20 8:02 ` [dpdk-dev] [PATCH v4 11/15] examples/ipsec-secgw: add driver mode worker Lukasz Bartosik
2020-02-20 8:02 ` [dpdk-dev] [PATCH v4 12/15] examples/ipsec-secgw: add app " Lukasz Bartosik
2020-02-24 14:13 ` Akhil Goyal
2020-02-25 11:50 ` [dpdk-dev] [EXT] " Lukas Bartosik
2020-02-25 12:13 ` Anoob Joseph
2020-02-25 16:03 ` Ananyev, Konstantin
2020-02-26 4:33 ` Anoob Joseph
2020-02-26 5:55 ` Akhil Goyal
2020-02-26 12:36 ` Ananyev, Konstantin
2020-02-26 6:04 ` Akhil Goyal
2020-02-26 10:32 ` Lukas Bartosik
2020-02-27 12:07 ` Akhil Goyal
2020-02-27 14:31 ` Lukas Bartosik
2020-02-20 8:02 ` [dpdk-dev] [PATCH v4 13/15] examples/ipsec-secgw: make number of buffers dynamic Lukasz Bartosik
2020-02-20 8:02 ` [dpdk-dev] [PATCH v4 14/15] doc: add event mode support to ipsec-secgw Lukasz Bartosik
2020-02-20 8:02 ` [dpdk-dev] [PATCH v4 15/15] examples/ipsec-secgw: reserve crypto queues in event mode Lukasz Bartosik
2020-02-24 5:20 ` [dpdk-dev] [PATCH v4 00/15] add eventmode to ipsec-secgw Anoob Joseph
2020-02-24 13:40 ` Akhil Goyal
2020-02-25 12:09 ` [dpdk-dev] [EXT] " Lukas Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 " Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 01/15] examples/ipsec-secgw: add default rte flow for inline Rx Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 02/15] examples/ipsec-secgw: add framework for eventmode helper Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 03/15] examples/ipsec-secgw: add eventdev port-lcore link Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 04/15] examples/ipsec-secgw: add Rx adapter support Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 05/15] examples/ipsec-secgw: add Tx " Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 06/15] examples/ipsec-secgw: add routines to display config Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 07/15] examples/ipsec-secgw: add routines to launch workers Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 08/15] examples/ipsec-secgw: add support for internal ports Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 09/15] examples/ipsec-secgw: add event helper config init/uninit Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 10/15] examples/ipsec-secgw: add eventmode to ipsec-secgw Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 11/15] examples/ipsec-secgw: add driver mode worker Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 12/15] examples/ipsec-secgw: add app " Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 13/15] examples/ipsec-secgw: make number of buffers dynamic Lukasz Bartosik
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 14/15] doc: add event mode support to ipsec-secgw Lukasz Bartosik
2020-04-12 16:37 ` Thomas Monjalon
2020-02-27 16:18 ` [dpdk-dev] [PATCH v5 15/15] examples/ipsec-secgw: reserve crypto queues in event mode Lukasz Bartosik
2020-03-02 8:47 ` [dpdk-dev] [PATCH v5 00/15] add eventmode to ipsec-secgw Anoob Joseph
2020-03-02 8:57 ` Akhil Goyal
2020-03-03 18:00 ` Ananyev, Konstantin
2020-03-12 5:32 ` Anoob Joseph
2020-03-12 5:55 ` Akhil Goyal
2020-03-12 9:57 ` [dpdk-dev] [EXT] " Lukas Bartosik
2020-03-12 13:25 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1582185727-6749-11-git-send-email-lbartosik@marvell.com \
--to=lbartosik@marvell.com \
--cc=adwivedi@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=anoobj@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=konstantin.ananyev@intel.com \
--cc=ktejasree@marvell.com \
--cc=marchana@marvell.com \
--cc=pathreya@marvell.com \
--cc=radu.nicolau@intel.com \
--cc=thomas@monjalon.net \
--cc=vattunuru@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).