From: Xiaojun Liu <xiaojun.liu@silicom.co.il>
To: xiao.w.wang@intel.com, qi.z.zhang@intel.com,
ngai-mint.kwan@intel.com, jacob.e.keller@intel.com
Cc: dev@dpdk.org, Xiaojun Liu <xiaojun.liu@silicom.co.il>
Subject: [dpdk-dev] [PATCH v2 0/5] support switch management
Date: Thu, 20 Feb 2020 21:59:29 +0800 [thread overview]
Message-ID: <1582207174-31037-1-git-send-email-xiaojun.liu@silicom.co.il> (raw)
In-Reply-To: <1576057875-7677-2-git-send-email-xiaojun.liu@silicom.co.il>
To avoid configuration for both kernel driver
and userspace SDK outside DPDK, we add switch
management in FM10K DPDK PMD driver.
Split dev init to 2 parts.
First only register the port in switch
management; second init hook will be
called after all the pf are registered
and switch initialization. It will finish
dev init. Also add switch interrupt support.
Add fm10k_mirror_rule_set/fm10k_mirror_rule_reset
to support mirror operation. Add fm10k_dev_filter_ctrl
to support flow operation.
Add dpdk port and pf mapping, so
the dpdk port can map to a specific pf
and 1 dpdk port can map to 2 pf to get
total 100G throughput.
Add flow interface to support offload flow into HW.
It supports parse vlan and parse mpls, all these
data will be transffered to ffu data.
Add switch management, includes initialization,
port mapping, epl port link, LED controller, interrupt handler.
It create 3 threads. One for interrupt handler, one for
LED controller, one for statistics.
Add ffu to support offload flow into HW.
It supports forward, mirror, push VLAN, pop VLAN.
It also supports flowset for a group flow definition.
The config file can configure debug log, port speed,
epl port mapping dpdk port, flowset. All these configuration
will be used by switch management.
Statistics includes epl port, ffu rule, dpdk port, and error.
All these statistics data are read from HW.
Modify switch header file to support getting logical port
and glort and device info.
Add epl serdes include loading spico,
controling pcsl, dma, dfe, ical. Add spico code.
Add state machine for epl lane and port, it creates
a pthread to handle the state changing event.
Add external port management, which will use
state machine to handle the event from lane and port.
The lane state will change between DOWN, WAIT_PLL_LOCK,
WAIT_SIGNAL_OK, WAIT_DFE_ICAL, WAIT_DFE_PCAL, UP.
The port state will change between DOWN, WAIT_LANE_UP, UP.
Add I2C to control the inside LED and PHY.
All the operations of I2C are using fm10k I2C register.
Add SBUS to communicate with spico(micro code in serdes)
by using fm10k SBUS register. This is like I2C operations.
Add registers defination, which include all the registers
will be used in the driver. Add switch management log API.
Add switch management structures. Modify Makefile to add
new files building
Xiaojun Liu (5):
net/fm10k: add basic functions for switch management
net/fm10k: add epl serdes and port control functions
net/fm10k: add ffu and statistics and config file functions
net/fm10k: add flow interface and switch management
net/fm10k: add switch management support
drivers/net/fm10k/Makefile | 25 +
drivers/net/fm10k/fm10k_ethdev.c | 587 +++++-
drivers/net/fm10k/switch/fm10k_config.c | 863 ++++++++
drivers/net/fm10k/switch/fm10k_config.h | 178 ++
drivers/net/fm10k/switch/fm10k_debug.h | 19 +
drivers/net/fm10k/switch/fm10k_ext_port.c | 841 ++++++++
drivers/net/fm10k/switch/fm10k_ext_port.h | 136 ++
drivers/net/fm10k/switch/fm10k_ffu.c | 1253 +++++++++++
drivers/net/fm10k/switch/fm10k_ffu.h | 31 +
drivers/net/fm10k/switch/fm10k_flow.c | 872 ++++++++
drivers/net/fm10k/switch/fm10k_flow.h | 26 +
drivers/net/fm10k/switch/fm10k_i2c.c | 310 +++
drivers/net/fm10k/switch/fm10k_i2c.h | 54 +
drivers/net/fm10k/switch/fm10k_regs.h | 2302 +++++++++++++++++++++
drivers/net/fm10k/switch/fm10k_sbus.c | 292 +++
drivers/net/fm10k/switch/fm10k_sbus.h | 40 +
drivers/net/fm10k/switch/fm10k_serdes.c | 1936 +++++++++++++++++
drivers/net/fm10k/switch/fm10k_serdes.h | 32 +
drivers/net/fm10k/switch/fm10k_sm.c | 190 ++
drivers/net/fm10k/switch/fm10k_sm.h | 81 +
drivers/net/fm10k/switch/fm10k_spico_code.c | 2966 +++++++++++++++++++++++++++
drivers/net/fm10k/switch/fm10k_spico_code.h | 21 +
drivers/net/fm10k/switch/fm10k_stats.c | 1242 +++++++++++
drivers/net/fm10k/switch/fm10k_stats.h | 257 +++
drivers/net/fm10k/switch/fm10k_switch.c | 2376 +++++++++++++++++++++
drivers/net/fm10k/switch/fm10k_switch.h | 475 +++++
26 files changed, 17364 insertions(+), 41 deletions(-)
create mode 100644 drivers/net/fm10k/switch/fm10k_config.c
create mode 100644 drivers/net/fm10k/switch/fm10k_config.h
create mode 100644 drivers/net/fm10k/switch/fm10k_debug.h
create mode 100644 drivers/net/fm10k/switch/fm10k_ext_port.c
create mode 100644 drivers/net/fm10k/switch/fm10k_ext_port.h
create mode 100644 drivers/net/fm10k/switch/fm10k_ffu.c
create mode 100644 drivers/net/fm10k/switch/fm10k_ffu.h
create mode 100644 drivers/net/fm10k/switch/fm10k_flow.c
create mode 100644 drivers/net/fm10k/switch/fm10k_flow.h
create mode 100644 drivers/net/fm10k/switch/fm10k_i2c.c
create mode 100644 drivers/net/fm10k/switch/fm10k_i2c.h
create mode 100644 drivers/net/fm10k/switch/fm10k_regs.h
create mode 100644 drivers/net/fm10k/switch/fm10k_sbus.c
create mode 100644 drivers/net/fm10k/switch/fm10k_sbus.h
create mode 100644 drivers/net/fm10k/switch/fm10k_serdes.c
create mode 100644 drivers/net/fm10k/switch/fm10k_serdes.h
create mode 100644 drivers/net/fm10k/switch/fm10k_sm.c
create mode 100644 drivers/net/fm10k/switch/fm10k_sm.h
create mode 100644 drivers/net/fm10k/switch/fm10k_spico_code.c
create mode 100644 drivers/net/fm10k/switch/fm10k_spico_code.h
create mode 100644 drivers/net/fm10k/switch/fm10k_stats.c
create mode 100644 drivers/net/fm10k/switch/fm10k_stats.h
create mode 100644 drivers/net/fm10k/switch/fm10k_switch.c
create mode 100644 drivers/net/fm10k/switch/fm10k_switch.h
--
1.8.3.1
next prev parent reply other threads:[~2020-02-20 14:00 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-11 9:51 [dpdk-dev] [PATCH v2 0/7] " Xiaojun Liu
2019-12-11 9:52 ` [dpdk-dev] [PATCH v2 1/7] net/fm10k: add i2c sbus registers definition Xiaojun Liu
2019-12-11 15:48 ` Jerin Jacob
2019-12-12 9:35 ` Xiaojun Liu
2019-12-12 17:12 ` Jerin Jacob
2019-12-13 2:44 ` Xiaojun Liu
2019-12-16 4:54 ` Jerin Jacob
2020-02-20 13:59 ` Xiaojun Liu [this message]
2020-02-20 13:59 ` [dpdk-dev] [PATCH v2 1/5] net/fm10k: add basic functions for switch management Xiaojun Liu
2020-02-28 8:38 ` [dpdk-dev] [PATCH v1 0/5] support fm10k " Xiaojun Liu
2020-02-28 8:38 ` [dpdk-dev] [PATCH v1 1/5] net/fm10k: add basic functions for " Xiaojun Liu
2020-03-16 6:37 ` Wang, Xiao W
2020-02-28 8:38 ` [dpdk-dev] [PATCH v1 2/5] net/fm10k: add epl serdes and port control functions Xiaojun Liu
2020-03-16 6:48 ` Wang, Xiao W
2020-02-28 8:38 ` [dpdk-dev] [PATCH v1 3/5] net/fm10k: add ffu and statistics and config file functions Xiaojun Liu
2020-03-16 7:04 ` Wang, Xiao W
2020-02-28 8:38 ` [dpdk-dev] [PATCH v1 4/5] net/fm10k: add flow interface and switch management Xiaojun Liu
2020-02-28 8:38 ` [dpdk-dev] [PATCH v1 5/5] net/fm10k: add switch management support Xiaojun Liu
2020-03-16 7:34 ` Wang, Xiao W
2020-03-20 6:58 ` [dpdk-dev] [PATCH v3 0/5] support fm10k switch management Xiaojun Liu
2020-03-20 6:58 ` [dpdk-dev] [PATCH v3 1/5] net/fm10k: add basic functions for " Xiaojun Liu
2020-04-02 8:41 ` Wang, Xiao W
2020-04-08 3:25 ` Xiaojun Liu
2020-03-20 6:58 ` [dpdk-dev] [PATCH v3 2/5] net/fm10k: add epl serdes and port control functions Xiaojun Liu
2020-03-20 6:58 ` [dpdk-dev] [PATCH v3 3/5] net/fm10k: add ffu and statistics and config file functions Xiaojun Liu
2020-03-20 6:58 ` [dpdk-dev] [PATCH v3 4/5] net/fm10k: add flow interface and switch management Xiaojun Liu
2020-04-02 8:55 ` Wang, Xiao W
2020-04-09 6:24 ` Xiaojun Liu
2020-03-20 6:58 ` [dpdk-dev] [PATCH v3 5/5] net/fm10k: add switch management support Xiaojun Liu
2020-04-02 9:12 ` Wang, Xiao W
2020-04-09 6:32 ` Xiaojun Liu
2020-02-20 13:59 ` [dpdk-dev] [PATCH v2 2/5] net/fm10k: add epl serdes and port control functions Xiaojun Liu
2020-02-20 13:59 ` [dpdk-dev] [PATCH v2 3/5] net/fm10k: add ffu and statistics and config file functions Xiaojun Liu
2020-02-20 13:59 ` [dpdk-dev] [PATCH v2 4/5] net/fm10k: add flow interface and switch management Xiaojun Liu
2020-02-20 13:59 ` [dpdk-dev] [PATCH v2 5/5] net/fm10k: add switch management support Xiaojun Liu
2020-02-25 11:28 ` Wang, Xiao W
2020-02-25 12:56 ` Xiaojun Liu
2020-03-05 1:23 ` Xiaojun Liu
2019-12-11 9:52 ` [dpdk-dev] [PATCH v2 2/7] net/fm10k: add some modules of port Xiaojun Liu
2019-12-11 9:52 ` [dpdk-dev] [PATCH v2 3/7] net/fm10k: add config ffu statistics support Xiaojun Liu
2019-12-11 9:52 ` [dpdk-dev] [PATCH v2 4/7] net/fm10k: add flow and switch management Xiaojun Liu
2019-12-11 9:52 ` [dpdk-dev] [PATCH v2 5/7] net/fm10k: add switch initialization Xiaojun Liu
2019-12-11 9:52 ` [dpdk-dev] [PATCH v2 6/7] net/fm10k: add mirror and filter ctrl Xiaojun Liu
2019-12-11 9:52 ` [dpdk-dev] [PATCH v2 7/7] net/fm10k: add dpdk port mapping Xiaojun Liu
2020-01-21 2:53 ` [dpdk-dev] [PATCH v2 0/7] support switch management Wang, Xiao W
2020-01-21 6:15 ` Xiaojun Liu
2020-02-11 10:31 ` Wang, Xiao W
2020-02-14 2:46 ` Xiaojun Liu
[not found] ` <ORIGINAL-RELEASE-1581835643311863404-DB7PR04MB5196A5418792DFB1F96DB8B7BD150@DB7PR04MB5196.eurprd04.prod.outlook.com>
2020-02-19 5:58 ` Xiaojun Liu
2020-02-19 10:56 ` Wang, Xiao W
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1582207174-31037-1-git-send-email-xiaojun.liu@silicom.co.il \
--to=xiaojun.liu@silicom.co.il \
--cc=dev@dpdk.org \
--cc=jacob.e.keller@intel.com \
--cc=ngai-mint.kwan@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=xiao.w.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).