[dpdk-dev] [PATCH v2 1/2] crypto/qat: support DOCSIS AES-256

[dpdk-dev] [PATCH v2 1/2] crypto/qat: support DOCSIS AES-256

[Mairtin o Loingsigh]

This patch adds support for DOCSIS AES-256 when using qat

Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
---
 drivers/crypto/qat/qat_sym_capabilities.h |  4 ++--
 drivers/crypto/qat/qat_sym_session.c      | 12 ++++++++++--
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/crypto/qat/qat_sym_capabilities.h b/drivers/crypto/qat/qat_sym_capabilities.h
index 028a56c56..7d216dea4 100644
--- a/drivers/crypto/qat/qat_sym_capabilities.h
+++ b/drivers/crypto/qat/qat_sym_capabilities.h
@@ -333,8 +333,8 @@
 				.block_size = 16,			\
 				.key_size = {				\
 					.min = 16,			\
-					.max = 16,			\
-					.increment = 0			\
+					.max = 32,			\
+					.increment = 16			\
 				},					\
 				.iv_size = {				\
 					.min = 16,			\
diff --git a/drivers/crypto/qat/qat_sym_session.c b/drivers/crypto/qat/qat_sym_session.c
index 4359f2f0b..d8b21bc2b 100644
--- a/drivers/crypto/qat/qat_sym_session.c
+++ b/drivers/crypto/qat/qat_sym_session.c
@@ -35,7 +35,7 @@ bpi_cipher_ctx_free(void *bpi_ctx)
 static int
 bpi_cipher_ctx_init(enum rte_crypto_cipher_algorithm cryptodev_algo,
 		enum rte_crypto_cipher_operation direction __rte_unused,
-		const uint8_t *key, void **ctx)
+		const uint8_t *key, uint16_t key_length, void **ctx)
 {
 	const EVP_CIPHER *algo = NULL;
 	int ret;
@@ -49,7 +49,10 @@ bpi_cipher_ctx_init(enum rte_crypto_cipher_algorithm cryptodev_algo,
 	if (cryptodev_algo == RTE_CRYPTO_CIPHER_DES_DOCSISBPI)
 		algo = EVP_des_ecb();
 	else
-		algo = EVP_aes_128_ecb();
+		if (key_length == ICP_QAT_HW_AES_128_KEY_SZ)
+			algo = EVP_aes_128_ecb();
+		else
+			algo = EVP_aes_256_ecb();
 
 	/* IV will be ECB encrypted whether direction is encrypt or decrypt*/
 	if (EVP_EncryptInit_ex(*ctx, algo, NULL, key, 0) != 1) {
@@ -286,6 +289,7 @@ qat_sym_session_configure_cipher(struct rte_cryptodev *dev,
 					cipher_xform->algo,
 					cipher_xform->op,
 					cipher_xform->key.data,
+					cipher_xform->key.length,
 					&session->bpi_ctx);
 		if (ret != 0) {
 			QAT_LOG(ERR, "failed to create DES BPI ctx");
@@ -304,6 +308,7 @@ qat_sym_session_configure_cipher(struct rte_cryptodev *dev,
 					cipher_xform->algo,
 					cipher_xform->op,
 					cipher_xform->key.data,
+					cipher_xform->key.length,
 					&session->bpi_ctx);
 		if (ret != 0) {
 			QAT_LOG(ERR, "failed to create AES BPI ctx");
@@ -1909,6 +1914,9 @@ int qat_sym_validate_aes_docsisbpi_key(int key_len,
 	case ICP_QAT_HW_AES_128_KEY_SZ:
 		*alg = ICP_QAT_HW_CIPHER_ALGO_AES128;
 		break;
+	case ICP_QAT_HW_AES_256_KEY_SZ:
+		*alg = ICP_QAT_HW_CIPHER_ALGO_AES256;
+		break;
 	default:
 		return -EINVAL;
 	}
-- 
2.17.1

[dpdk-dev] [PATCH v2 2/2] test/crypto: Add AES-256 DOCSIS test vectors

[Mairtin o Loingsigh]

This patch adds test vectors for AES-256 and sets QAT as the
target PMD.

Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
---
 app/test/test_cryptodev_aes_test_vectors.h | 176 +++++++++++++++++++++
 1 file changed, 176 insertions(+)

diff --git a/app/test/test_cryptodev_aes_test_vectors.h b/app/test/test_cryptodev_aes_test_vectors.h
index 8307fcf9a..08ae09390 100644
--- a/app/test/test_cryptodev_aes_test_vectors.h
+++ b/app/test/test_cryptodev_aes_test_vectors.h
@@ -47,6 +47,10 @@ static const uint8_t ciphertext_aes_docsis_bpi_cfb[] = {
 	0xFC, 0x68, 0xA3, 0x55, 0x60, 0x37, 0xDC
 };
 
+static const uint8_t ciphertext_aes256_docsis_bpi_cfb[] = {
+	0xE3, 0x75, 0xF2, 0x30, 0x1F, 0x75, 0x9A
+};
+
 static const uint8_t plaintext_aes_docsis_bpi_cbc_cfb[] = {
 	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
 	0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x91,
@@ -59,6 +63,12 @@ static const uint8_t ciphertext_aes_docsis_bpi_cbc_cfb[] = {
 	0x44, 0xD4, 0x73
 };
 
+static const uint8_t ciphertext_aes256_docsis_bpi_cbc_cfb[] = {
+	0xD1, 0x28, 0x73, 0x1F, 0xB5, 0x28, 0xB5, 0x18,
+	0xAB, 0x51, 0xAB, 0xC8, 0x98, 0x3D, 0xD1, 0xEE,
+	0xE4, 0x43, 0x59
+};
+
 static const uint8_t plaintext_aes192ctr[] = {
 	0x01, 0x0F, 0x10, 0x1F, 0x20, 0x1C, 0x0E, 0xB8,
 	0xFB, 0x5C, 0xCD, 0xCC, 0x1F, 0xF9, 0xAF, 0x0B,
@@ -1535,6 +1545,93 @@ static const struct blockcipher_test_data aes_test_data_docsis_3 = {
 	}
 };
 
+/* Multiple of AES 256 block size */
+static const struct blockcipher_test_data aes_test_data_docsis_4 = {
+	.crypto_algo = RTE_CRYPTO_CIPHER_AES_DOCSISBPI,
+	.cipher_key = {
+		.data = {
+			0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+			0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A,
+			0xD4, 0xC3, 0xA3, 0xAA, 0x33, 0x62, 0x61, 0xE0,
+			0x37, 0x07, 0xB8, 0x23, 0xA2, 0xA3, 0xB5, 0x8D
+		},
+		.len = 32
+	},
+	.iv = {
+		.data = {
+			0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+			0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
+		},
+		.len = 16
+	},
+	.plaintext = {
+		.data = plaintext_aes_common,
+		.len = 512
+	},
+	.ciphertext = {
+		.data = ciphertext512_aes256cbc,
+		.len = 512
+	}
+};
+
+/* Less than AES 256 block size */
+static const struct blockcipher_test_data aes_test_data_docsis_5 = {
+	.crypto_algo = RTE_CRYPTO_CIPHER_AES_DOCSISBPI,
+	.cipher_key = {
+		.data = {
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB,
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB,
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB,
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB
+		},
+		.len = 32
+	},
+	.iv = {
+		.data = {
+			0x81, 0x0E, 0x52, 0x8E, 0x1C, 0x5F, 0xDA, 0x1A,
+			0x81, 0x0E, 0x52, 0x8E, 0x1C, 0x5F, 0xDA, 0x1A
+		},
+		.len = 16
+	},
+	.plaintext = {
+		.data = plaintext_aes_docsis_bpi_cfb,
+		.len = 7
+	},
+	.ciphertext = {
+		.data = ciphertext_aes256_docsis_bpi_cfb,
+		.len = 7
+	}
+};
+
+/* Not multiple of AES 256 block size */
+static const struct blockcipher_test_data aes_test_data_docsis_6 = {
+	.crypto_algo = RTE_CRYPTO_CIPHER_AES_DOCSISBPI,
+	.cipher_key = {
+		.data = {
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB,
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB,
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB,
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB
+		},
+		.len = 32
+	},
+	.iv = {
+		.data = {
+			0x81, 0x0E, 0x52, 0x8E, 0x1C, 0x5F, 0xDA, 0x1A,
+			0x81, 0x0E, 0x52, 0x8E, 0x1C, 0x5F, 0xDA, 0x1A
+		},
+		.len = 16
+	},
+	.plaintext = {
+		.data = plaintext_aes_docsis_bpi_cbc_cfb,
+		.len = 19
+	},
+	.ciphertext = {
+		.data = ciphertext_aes256_docsis_bpi_cbc_cfb,
+		.len = 19
+	}
+};
+
 static const uint8_t
 cipher_aescbc_offset_16[] = {
 	0x57, 0x68, 0x61, 0x74, 0x20, 0x61, 0x20, 0x6C,
@@ -2637,5 +2734,84 @@ static const struct blockcipher_test_case aes_docsis_test_cases[] = {
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_MB
 	},
+	/* AES 256 */
+	{
+		.test_descr = "AES-256-DOCSIS-BPI Full Block Encryption",
+		.test_data = &aes_test_data_docsis_4,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI Runt Block Encryption",
+		.test_data = &aes_test_data_docsis_5,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI Uneven Encryption",
+		.test_data = &aes_test_data_docsis_6,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI Full Block Decryption",
+		.test_data = &aes_test_data_docsis_4,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI Runt Block Decryption",
+		.test_data = &aes_test_data_docsis_5,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI Uneven Decryption",
+		.test_data = &aes_test_data_docsis_6,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI OOP Full Block Encryption",
+		.test_data = &aes_test_data_docsis_4,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI OOP Runt Block Encryption",
+		.test_data = &aes_test_data_docsis_5,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI OOP Uneven Block Encryption",
+		.test_data = &aes_test_data_docsis_6,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI OOP Full Block Decryption",
+		.test_data = &aes_test_data_docsis_4,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI OOP Runt Block Decryption",
+		.test_data = &aes_test_data_docsis_5,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI OOP Uneven Block Decryption",
+		.test_data = &aes_test_data_docsis_6,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
 };
 #endif /* TEST_CRYPTODEV_AES_TEST_VECTORS_H_ */
-- 
2.17.1

Re: [dpdk-dev] [PATCH v2 2/2] test/crypto: Add AES-256 DOCSIS test vectors

[Trahe, Fiona]

> -----Original Message-----
> From: O'loingsigh, Mairtin <mairtin.oloingsigh@intel.com>
> Sent: Wednesday, February 26, 2020 9:04 AM
> To: Trahe, Fiona <fiona.trahe@intel.com>; akhil.goyal@nxp.com
> Cc: dev@dpdk.org; O'loingsigh, Mairtin <mairtin.oloingsigh@intel.com>
> Subject: [PATCH v2 2/2] test/crypto: Add AES-256 DOCSIS test vectors
> 
> This patch adds test vectors for AES-256 and sets QAT as the
> target PMD.
> 
> Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>

Re: [dpdk-dev] [PATCH v2 1/2] crypto/qat: support DOCSIS AES-256

[Trahe, Fiona]

> -----Original Message-----
> From: O'loingsigh, Mairtin <mairtin.oloingsigh@intel.com>
> Sent: Wednesday, February 26, 2020 9:04 AM
> To: Trahe, Fiona <fiona.trahe@intel.com>; akhil.goyal@nxp.com
> Cc: dev@dpdk.org; O'loingsigh, Mairtin <mairtin.oloingsigh@intel.com>
> Subject: [PATCH v2 1/2] crypto/qat: support DOCSIS AES-256
> 
> This patch adds support for DOCSIS AES-256 when using qat
> 
> Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>

Re: [dpdk-dev] [PATCH v2 1/2] crypto/qat: support DOCSIS AES-256

[Akhil Goyal]

> >
> > This patch adds support for DOCSIS AES-256 when using qat
> >
> > Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
> Acked-by: Fiona Trahe <fiona.trahe@intel.com>

Series Applied to dpdk-next-crypto

Thanks.

[dpdk-dev] [PATCH v3] crypto/qat: support DOCSIS AES-256

[Mairtin o Loingsigh]

This patch adds support for DOCSIS AES-256 when using qat

Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
---
 drivers/crypto/qat/qat_sym_capabilities.h |  4 ++--
 drivers/crypto/qat/qat_sym_session.c      | 12 ++++++++++--
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/crypto/qat/qat_sym_capabilities.h b/drivers/crypto/qat/qat_sym_capabilities.h
index 028a56c56..7d216dea4 100644
--- a/drivers/crypto/qat/qat_sym_capabilities.h
+++ b/drivers/crypto/qat/qat_sym_capabilities.h
@@ -333,8 +333,8 @@
 				.block_size = 16,			\
 				.key_size = {				\
 					.min = 16,			\
-					.max = 16,			\
-					.increment = 0			\
+					.max = 32,			\
+					.increment = 16			\
 				},					\
 				.iv_size = {				\
 					.min = 16,			\
diff --git a/drivers/crypto/qat/qat_sym_session.c b/drivers/crypto/qat/qat_sym_session.c
index 4359f2f0b..d8b21bc2b 100644
--- a/drivers/crypto/qat/qat_sym_session.c
+++ b/drivers/crypto/qat/qat_sym_session.c
@@ -35,7 +35,7 @@ bpi_cipher_ctx_free(void *bpi_ctx)
 static int
 bpi_cipher_ctx_init(enum rte_crypto_cipher_algorithm cryptodev_algo,
 		enum rte_crypto_cipher_operation direction __rte_unused,
-		const uint8_t *key, void **ctx)
+		const uint8_t *key, uint16_t key_length, void **ctx)
 {
 	const EVP_CIPHER *algo = NULL;
 	int ret;
@@ -49,7 +49,10 @@ bpi_cipher_ctx_init(enum rte_crypto_cipher_algorithm cryptodev_algo,
 	if (cryptodev_algo == RTE_CRYPTO_CIPHER_DES_DOCSISBPI)
 		algo = EVP_des_ecb();
 	else
-		algo = EVP_aes_128_ecb();
+		if (key_length == ICP_QAT_HW_AES_128_KEY_SZ)
+			algo = EVP_aes_128_ecb();
+		else
+			algo = EVP_aes_256_ecb();
 
 	/* IV will be ECB encrypted whether direction is encrypt or decrypt*/
 	if (EVP_EncryptInit_ex(*ctx, algo, NULL, key, 0) != 1) {
@@ -286,6 +289,7 @@ qat_sym_session_configure_cipher(struct rte_cryptodev *dev,
 					cipher_xform->algo,
 					cipher_xform->op,
 					cipher_xform->key.data,
+					cipher_xform->key.length,
 					&session->bpi_ctx);
 		if (ret != 0) {
 			QAT_LOG(ERR, "failed to create DES BPI ctx");
@@ -304,6 +308,7 @@ qat_sym_session_configure_cipher(struct rte_cryptodev *dev,
 					cipher_xform->algo,
 					cipher_xform->op,
 					cipher_xform->key.data,
+					cipher_xform->key.length,
 					&session->bpi_ctx);
 		if (ret != 0) {
 			QAT_LOG(ERR, "failed to create AES BPI ctx");
@@ -1909,6 +1914,9 @@ int qat_sym_validate_aes_docsisbpi_key(int key_len,
 	case ICP_QAT_HW_AES_128_KEY_SZ:
 		*alg = ICP_QAT_HW_CIPHER_ALGO_AES128;
 		break;
+	case ICP_QAT_HW_AES_256_KEY_SZ:
+		*alg = ICP_QAT_HW_CIPHER_ALGO_AES256;
+		break;
 	default:
 		return -EINVAL;
 	}
-- 
2.12.3

[dpdk-dev] [PATCH v3] test/crypto: add AES-256 DOCSIS test vectors

[Mairtin o Loingsigh]

This patch adds test vectors for AES-256 and sets QAT as the
target PMD.

Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
---
 app/test/test_cryptodev_aes_test_vectors.h | 176 +++++++++++++++++++++++++++++
 1 file changed, 176 insertions(+)

diff --git a/app/test/test_cryptodev_aes_test_vectors.h b/app/test/test_cryptodev_aes_test_vectors.h
index 8307fcf9a..08ae09390 100644
--- a/app/test/test_cryptodev_aes_test_vectors.h
+++ b/app/test/test_cryptodev_aes_test_vectors.h
@@ -47,6 +47,10 @@ static const uint8_t ciphertext_aes_docsis_bpi_cfb[] = {
 	0xFC, 0x68, 0xA3, 0x55, 0x60, 0x37, 0xDC
 };
 
+static const uint8_t ciphertext_aes256_docsis_bpi_cfb[] = {
+	0xE3, 0x75, 0xF2, 0x30, 0x1F, 0x75, 0x9A
+};
+
 static const uint8_t plaintext_aes_docsis_bpi_cbc_cfb[] = {
 	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
 	0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x91,
@@ -59,6 +63,12 @@ static const uint8_t ciphertext_aes_docsis_bpi_cbc_cfb[] = {
 	0x44, 0xD4, 0x73
 };
 
+static const uint8_t ciphertext_aes256_docsis_bpi_cbc_cfb[] = {
+	0xD1, 0x28, 0x73, 0x1F, 0xB5, 0x28, 0xB5, 0x18,
+	0xAB, 0x51, 0xAB, 0xC8, 0x98, 0x3D, 0xD1, 0xEE,
+	0xE4, 0x43, 0x59
+};
+
 static const uint8_t plaintext_aes192ctr[] = {
 	0x01, 0x0F, 0x10, 0x1F, 0x20, 0x1C, 0x0E, 0xB8,
 	0xFB, 0x5C, 0xCD, 0xCC, 0x1F, 0xF9, 0xAF, 0x0B,
@@ -1535,6 +1545,93 @@ static const struct blockcipher_test_data aes_test_data_docsis_3 = {
 	}
 };
 
+/* Multiple of AES 256 block size */
+static const struct blockcipher_test_data aes_test_data_docsis_4 = {
+	.crypto_algo = RTE_CRYPTO_CIPHER_AES_DOCSISBPI,
+	.cipher_key = {
+		.data = {
+			0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+			0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A,
+			0xD4, 0xC3, 0xA3, 0xAA, 0x33, 0x62, 0x61, 0xE0,
+			0x37, 0x07, 0xB8, 0x23, 0xA2, 0xA3, 0xB5, 0x8D
+		},
+		.len = 32
+	},
+	.iv = {
+		.data = {
+			0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+			0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
+		},
+		.len = 16
+	},
+	.plaintext = {
+		.data = plaintext_aes_common,
+		.len = 512
+	},
+	.ciphertext = {
+		.data = ciphertext512_aes256cbc,
+		.len = 512
+	}
+};
+
+/* Less than AES 256 block size */
+static const struct blockcipher_test_data aes_test_data_docsis_5 = {
+	.crypto_algo = RTE_CRYPTO_CIPHER_AES_DOCSISBPI,
+	.cipher_key = {
+		.data = {
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB,
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB,
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB,
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB
+		},
+		.len = 32
+	},
+	.iv = {
+		.data = {
+			0x81, 0x0E, 0x52, 0x8E, 0x1C, 0x5F, 0xDA, 0x1A,
+			0x81, 0x0E, 0x52, 0x8E, 0x1C, 0x5F, 0xDA, 0x1A
+		},
+		.len = 16
+	},
+	.plaintext = {
+		.data = plaintext_aes_docsis_bpi_cfb,
+		.len = 7
+	},
+	.ciphertext = {
+		.data = ciphertext_aes256_docsis_bpi_cfb,
+		.len = 7
+	}
+};
+
+/* Not multiple of AES 256 block size */
+static const struct blockcipher_test_data aes_test_data_docsis_6 = {
+	.crypto_algo = RTE_CRYPTO_CIPHER_AES_DOCSISBPI,
+	.cipher_key = {
+		.data = {
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB,
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB,
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB,
+			0xE6, 0x60, 0x0F, 0xD8, 0x85, 0x2E, 0xF5, 0xAB
+		},
+		.len = 32
+	},
+	.iv = {
+		.data = {
+			0x81, 0x0E, 0x52, 0x8E, 0x1C, 0x5F, 0xDA, 0x1A,
+			0x81, 0x0E, 0x52, 0x8E, 0x1C, 0x5F, 0xDA, 0x1A
+		},
+		.len = 16
+	},
+	.plaintext = {
+		.data = plaintext_aes_docsis_bpi_cbc_cfb,
+		.len = 19
+	},
+	.ciphertext = {
+		.data = ciphertext_aes256_docsis_bpi_cbc_cfb,
+		.len = 19
+	}
+};
+
 static const uint8_t
 cipher_aescbc_offset_16[] = {
 	0x57, 0x68, 0x61, 0x74, 0x20, 0x61, 0x20, 0x6C,
@@ -2637,5 +2734,84 @@ static const struct blockcipher_test_case aes_docsis_test_cases[] = {
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_MB
 	},
+	/* AES 256 */
+	{
+		.test_descr = "AES-256-DOCSIS-BPI Full Block Encryption",
+		.test_data = &aes_test_data_docsis_4,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI Runt Block Encryption",
+		.test_data = &aes_test_data_docsis_5,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI Uneven Encryption",
+		.test_data = &aes_test_data_docsis_6,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI Full Block Decryption",
+		.test_data = &aes_test_data_docsis_4,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI Runt Block Decryption",
+		.test_data = &aes_test_data_docsis_5,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI Uneven Decryption",
+		.test_data = &aes_test_data_docsis_6,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI OOP Full Block Encryption",
+		.test_data = &aes_test_data_docsis_4,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI OOP Runt Block Encryption",
+		.test_data = &aes_test_data_docsis_5,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI OOP Uneven Block Encryption",
+		.test_data = &aes_test_data_docsis_6,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI OOP Full Block Decryption",
+		.test_data = &aes_test_data_docsis_4,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI OOP Runt Block Decryption",
+		.test_data = &aes_test_data_docsis_5,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-DOCSIS-BPI OOP Uneven Block Decryption",
+		.test_data = &aes_test_data_docsis_6,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
 };
 #endif /* TEST_CRYPTODEV_AES_TEST_VECTORS_H_ */
-- 
2.12.3

Re: [dpdk-dev] [PATCH v3] test/crypto: add AES-256 DOCSIS test vectors

[Akhil Goyal]

Hi Mairtin,

I believe your patch is not rebased on top of current tree. There is no pmd_mask now.
Also, I see that the AES 256 cases are already there. This patch is already there I guess.


>  static const uint8_t
>  cipher_aescbc_offset_16[] = {
>  	0x57, 0x68, 0x61, 0x74, 0x20, 0x61, 0x20, 0x6C,
> @@ -2637,5 +2734,84 @@ static const struct blockcipher_test_case
> aes_docsis_test_cases[] = {
>  		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
>  			BLOCKCIPHER_TEST_TARGET_PMD_MB
>  	},
> +	/* AES 256 */
> +	{
> +		.test_descr = "AES-256-DOCSIS-BPI Full Block Encryption",
> +		.test_data = &aes_test_data_docsis_4,
> +		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
> +		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
> +	},
> +	{
> +		.test_descr = "AES-256-DOCSIS-BPI Runt Block Encryption",
> +		.test_data = &aes_test_data_docsis_5,
> +		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
> +		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
> +	},
> +	{
> +		.test_descr = "AES-256-DOCSIS-BPI Uneven Encryption",
> +		.test_data = &aes_test_data_docsis_6,
> +		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
> +		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
> +	},
> +	{
> +		.test_descr = "AES-256-DOCSIS-BPI Full Block Decryption",
> +		.test_data = &aes_test_data_docsis_4,
> +		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
> +		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
> +	},
> +	{
> +		.test_descr = "AES-256-DOCSIS-BPI Runt Block Decryption",
> +		.test_data = &aes_test_data_docsis_5,
> +		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
> +		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
> +	},
> +	{
> +		.test_descr = "AES-256-DOCSIS-BPI Uneven Decryption",
> +		.test_data = &aes_test_data_docsis_6,
> +		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
> +		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
> +	},
> +	{
> +		.test_descr = "AES-256-DOCSIS-BPI OOP Full Block Encryption",
> +		.test_data = &aes_test_data_docsis_4,
> +		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
> +		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
> +		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
> +	},
> +	{
> +		.test_descr = "AES-256-DOCSIS-BPI OOP Runt Block Encryption",
> +		.test_data = &aes_test_data_docsis_5,
> +		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
> +		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
> +		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
> +	},
> +	{
> +		.test_descr = "AES-256-DOCSIS-BPI OOP Uneven Block
> Encryption",
> +		.test_data = &aes_test_data_docsis_6,
> +		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
> +		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
> +		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
> +	},
> +	{
> +		.test_descr = "AES-256-DOCSIS-BPI OOP Full Block Decryption",
> +		.test_data = &aes_test_data_docsis_4,
> +		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
> +		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
> +		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
> +	},
> +	{
> +		.test_descr = "AES-256-DOCSIS-BPI OOP Runt Block Decryption",
> +		.test_data = &aes_test_data_docsis_5,
> +		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
> +		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
> +		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
> +	},
> +	{
> +		.test_descr = "AES-256-DOCSIS-BPI OOP Uneven Block
> Decryption",
> +		.test_data = &aes_test_data_docsis_6,
> +		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
> +		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
> +		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
> +	},
>  };
>  #endif /* TEST_CRYPTODEV_AES_TEST_VECTORS_H_ */
> --
> 2.12.3

[dpdk-dev] [PATCH v3] doc: QAT support for AES-256 DOCSIS

[Mairtin o Loingsigh]

Update QAT pmd to support AES-256 DOCSIS

Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
---
 doc/guides/rel_notes/release_20_05.rst | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/doc/guides/rel_notes/release_20_05.rst b/doc/guides/rel_notes/release_20_05.rst
index 82df72c2b..ee494f7aa 100644
--- a/doc/guides/rel_notes/release_20_05.rst
+++ b/doc/guides/rel_notes/release_20_05.rst
@@ -190,6 +190,10 @@ New Features
   any checksum calculation was requested - in such case the code falls back to
   fixed compression as before.
 
+* **Updated the QAT PMD.**
+
+  * Added AES-256 DOCSIS algorithm support to QAT PMD.
+
 * **Updated the turbo_sw bbdev PMD.**
 
   Supported large size code blocks which does not fit in one mbuf segment.
-- 
2.12.3

Re: [dpdk-dev] [PATCH v3] doc: QAT support for AES-256 DOCSIS

[Akhil Goyal]

> 
> Update QAT pmd to support AES-256 DOCSIS
> 
> Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
> ---
Release note should be part of the patch which is supporting the feature.

Re: [dpdk-dev] [PATCH v3] crypto/qat: support DOCSIS AES-256

[Akhil Goyal]

I believe this patch is already applied. Why is it recent?

Re: [dpdk-dev] [PATCH v3] crypto/qat: support DOCSIS AES-256

[O'loingsigh, Mairtin]

These are the patches for QAT AES-256 DOCSIS along with the documentation update (which was missing from previous version)

Regards,
Mairtin

-----Original Message-----
From: Akhil Goyal <akhil.goyal@nxp.com> 
Sent: Monday, May 11, 2020 2:14 PM
To: O'loingsigh, Mairtin <mairtin.oloingsigh@intel.com>; Trahe, Fiona <fiona.trahe@intel.com>
Cc: dev@dpdk.org
Subject: RE: [PATCH v3] crypto/qat: support DOCSIS AES-256

I believe this patch is already applied. Why is it recent?

Re: [dpdk-dev] [PATCH v3] crypto/qat: support DOCSIS AES-256

[Akhil Goyal]

In that case you should send only the incremental patch and add a Fixes reference to the original patch.

> 
> These are the patches for QAT AES-256 DOCSIS along with the documentation
> update (which was missing from previous version)
> 
> Regards,
> Mairtin
> 
> -----Original Message-----
> From: Akhil Goyal <akhil.goyal@nxp.com>
> Sent: Monday, May 11, 2020 2:14 PM
> To: O'loingsigh, Mairtin <mairtin.oloingsigh@intel.com>; Trahe, Fiona
> <fiona.trahe@intel.com>
> Cc: dev@dpdk.org
> Subject: RE: [PATCH v3] crypto/qat: support DOCSIS AES-256
> 
> I believe this patch is already applied. Why is it recent?

[dpdk-dev] [PATCH v2 1/2] crypto/aesni_mb: support DOCSIS AES-256

[Mairtin o Loingsigh]

This patch adds support for DOCSIS AES-256 when using AESNI-MB

Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
---
 drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
index 845661174..0d555ec29 100644
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
@@ -319,8 +319,14 @@ static const struct rte_cryptodev_capabilities aesni_mb_pmd_capabilities[] = {
 				},
 				.iv_size = {
 					.min = 16,
+#if IMB_VERSION_NUM >= IMB_VERSION(0, 53, 3)
+					.max = 32,
+					.increment = 16
+#else
 					.max = 16,
 					.increment = 0
+#endif
+
 				}
 			}, }
 		}, }
-- 
2.17.1

[dpdk-dev] [PATCH v2 2/2] test/crypto: Add AES-256 DOCSIS test vectors

[Mairtin o Loingsigh]

This patch adds test vectors for AES-256 and sets AESNI-MB as the
target PMD

Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
---
 app/test/test_cryptodev_aes_test_vectors.h | 81 ++++++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/app/test/test_cryptodev_aes_test_vectors.h b/app/test/test_cryptodev_aes_test_vectors.h
index 08ae09390..df338756f 100644
--- a/app/test/test_cryptodev_aes_test_vectors.h
+++ b/app/test/test_cryptodev_aes_test_vectors.h
@@ -5,6 +5,15 @@
 #ifndef TEST_CRYPTODEV_AES_TEST_VECTORS_H_
 #define TEST_CRYPTODEV_AES_TEST_VECTORS_H_
 
+#ifdef RTE_LIBRTE_PMD_AESNI_MB
+#include <intel-ipsec-mb.h>
+#endif
+
+#if !defined(IMB_VERSION_NUM)
+#define IMB_VERSION(a, b, c) (((a) << 16) + ((b) << 8) + (c))
+#define IMB_VERSION_NUM IMB_VERSION(0, 49, 0)
+#endif
+
 /* test vectors */
 static const uint8_t plaintext_aes128ctr[] = {
 	0x6B, 0xC1, 0xBE, 0xE2, 0x2E, 0x40, 0x9F, 0x96,
@@ -2739,79 +2748,151 @@ static const struct blockcipher_test_case aes_docsis_test_cases[] = {
 		.test_descr = "AES-256-DOCSIS-BPI Full Block Encryption",
 		.test_data = &aes_test_data_docsis_4,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+#if IMB_VERSION_NUM >= IMB_VERSION(0, 53, 3)
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+			BLOCKCIPHER_TEST_TARGET_PMD_MB
+#else
+
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+#endif
 	},
 	{
 		.test_descr = "AES-256-DOCSIS-BPI Runt Block Encryption",
 		.test_data = &aes_test_data_docsis_5,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+#if IMB_VERSION_NUM >= IMB_VERSION(0, 53, 3)
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+			BLOCKCIPHER_TEST_TARGET_PMD_MB
+#else
+
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+#endif
 	},
 	{
 		.test_descr = "AES-256-DOCSIS-BPI Uneven Encryption",
 		.test_data = &aes_test_data_docsis_6,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+#if IMB_VERSION_NUM >= IMB_VERSION(0, 53, 3)
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+			BLOCKCIPHER_TEST_TARGET_PMD_MB
+#else
+
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+#endif
 	},
 	{
 		.test_descr = "AES-256-DOCSIS-BPI Full Block Decryption",
 		.test_data = &aes_test_data_docsis_4,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+#if IMB_VERSION_NUM >= IMB_VERSION(0, 53, 3)
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+			BLOCKCIPHER_TEST_TARGET_PMD_MB
+#else
+
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+#endif
 	},
 	{
 		.test_descr = "AES-256-DOCSIS-BPI Runt Block Decryption",
 		.test_data = &aes_test_data_docsis_5,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+#if IMB_VERSION_NUM >= IMB_VERSION(0, 53, 3)
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+			BLOCKCIPHER_TEST_TARGET_PMD_MB
+#else
+
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+#endif
 	},
 	{
 		.test_descr = "AES-256-DOCSIS-BPI Uneven Decryption",
 		.test_data = &aes_test_data_docsis_6,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+#if IMB_VERSION_NUM >= IMB_VERSION(0, 53, 3)
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+			BLOCKCIPHER_TEST_TARGET_PMD_MB
+#else
+
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+#endif
 	},
 	{
 		.test_descr = "AES-256-DOCSIS-BPI OOP Full Block Encryption",
 		.test_data = &aes_test_data_docsis_4,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
 		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+#if IMB_VERSION_NUM >= IMB_VERSION(0, 53, 3)
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+			BLOCKCIPHER_TEST_TARGET_PMD_MB
+#else
+
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+#endif
 	},
 	{
 		.test_descr = "AES-256-DOCSIS-BPI OOP Runt Block Encryption",
 		.test_data = &aes_test_data_docsis_5,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
 		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+#if IMB_VERSION_NUM >= IMB_VERSION(0, 53, 3)
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+			BLOCKCIPHER_TEST_TARGET_PMD_MB
+#else
+
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+#endif
 	},
 	{
 		.test_descr = "AES-256-DOCSIS-BPI OOP Uneven Block Encryption",
 		.test_data = &aes_test_data_docsis_6,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
 		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+#if IMB_VERSION_NUM >= IMB_VERSION(0, 53, 3)
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+			BLOCKCIPHER_TEST_TARGET_PMD_MB
+#else
+
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+#endif
 	},
 	{
 		.test_descr = "AES-256-DOCSIS-BPI OOP Full Block Decryption",
 		.test_data = &aes_test_data_docsis_4,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
 		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+#if IMB_VERSION_NUM >= IMB_VERSION(0, 53, 3)
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+			BLOCKCIPHER_TEST_TARGET_PMD_MB
+#else
+
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+#endif
 	},
 	{
 		.test_descr = "AES-256-DOCSIS-BPI OOP Runt Block Decryption",
 		.test_data = &aes_test_data_docsis_5,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
 		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+#if IMB_VERSION_NUM >= IMB_VERSION(0, 53, 3)
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+			BLOCKCIPHER_TEST_TARGET_PMD_MB
+#else
+
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+#endif
 	},
 	{
 		.test_descr = "AES-256-DOCSIS-BPI OOP Uneven Block Decryption",
 		.test_data = &aes_test_data_docsis_6,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
 		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+#if IMB_VERSION_NUM >= IMB_VERSION(0, 53, 3)
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+			BLOCKCIPHER_TEST_TARGET_PMD_MB
+#else
+
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+#endif
 	},
 };
 #endif /* TEST_CRYPTODEV_AES_TEST_VECTORS_H_ */
-- 
2.17.1

Re: [dpdk-dev] [PATCH v2 2/2] test/crypto: Add AES-256 DOCSIS test vectors

[De Lara Guarch, Pablo]

> -----Original Message-----
> From: O'loingsigh, Mairtin <mairtin.oloingsigh@intel.com>
> Sent: Monday, April 6, 2020 4:36 PM
> To: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>
> Cc: dev@dpdk.org; O'loingsigh, Mairtin <mairtin.oloingsigh@intel.com>
> Subject: [PATCH v2 2/2] test/crypto: Add AES-256 DOCSIS test vectors
> 
> This patch adds test vectors for AES-256 and sets AESNI-MB as the target PMD
> 
> Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>

Acked-by: Pablo de Lara <Pablo.de.lara.guarch@intel.com>