* [dpdk-dev] [PATCH] net/mlx5: creating relaxed ordering memory regions
@ 2020-03-24 11:39 Shiri Kuzin
2020-03-25 14:25 ` Raslan Darawsheh
0 siblings, 1 reply; 2+ messages in thread
From: Shiri Kuzin @ 2020-03-24 11:39 UTC (permalink / raw)
To: dev; +Cc: matan, rasland, viacheslavo
In the current state, when preforming read/write
transactions we must wait for a completion in order
to run the next transaction, and all transactions are
performed by order.
Relaxed Ordering is a PCI optimization which by enabling it
we allow the system to perform read/writes in a different
order without having to wait for completion and improve
the performance in that matter.
This commit introduces the creation of relaxed ordering
memory regions in mlx5.
As relaxed ordering is an optimization, drivers that
do not support it can simply ignore it and therefore
it is enabled by default.
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
---
doc/guides/rel_notes/release_20_05.rst | 2 +-
drivers/common/mlx5/mlx5_devx_cmds.c | 4 ++++
drivers/common/mlx5/mlx5_devx_cmds.h | 1 +
drivers/common/mlx5/mlx5_glue.h | 4 ++++
drivers/common/mlx5/mlx5_prm.h | 4 +++-
drivers/net/mlx5/mlx5_flow_dv.c | 1 +
drivers/net/mlx5/mlx5_mr.c | 6 ++++--
drivers/vdpa/mlx5/mlx5_vdpa_lm.c | 1 +
drivers/vdpa/mlx5/mlx5_vdpa_mem.c | 1 +
9 files changed, 20 insertions(+), 4 deletions(-)
diff --git a/doc/guides/rel_notes/release_20_05.rst b/doc/guides/rel_notes/release_20_05.rst
index 000bbf5..c960fd2 100644
--- a/doc/guides/rel_notes/release_20_05.rst
+++ b/doc/guides/rel_notes/release_20_05.rst
@@ -61,7 +61,7 @@ New Features
Updated Mellanox mlx5 driver with new features and improvements, including:
* Added support for matching on IPv4 Time To Live and IPv6 Hop Limit.
-
+ * Added support for creating Relaxed Ordering Memory Regions.
Removed Items
-------------
diff --git a/drivers/common/mlx5/mlx5_devx_cmds.c b/drivers/common/mlx5/mlx5_devx_cmds.c
index d960bc9..1157a44 100644
--- a/drivers/common/mlx5/mlx5_devx_cmds.c
+++ b/drivers/common/mlx5/mlx5_devx_cmds.c
@@ -196,6 +196,10 @@ struct mlx5_devx_obj *
MLX5_SET(mkc, mkc, pd, attr->pd);
MLX5_SET(mkc, mkc, mkey_7_0, attr->umem_id & 0xFF);
MLX5_SET(mkc, mkc, translations_octword_size, translation_size);
+ if (attr->relaxed_ordering == 1) {
+ MLX5_SET(mkc, mkc, relaxed_ordering_write, 0x1);
+ MLX5_SET(mkc, mkc, relaxed_ordering_read, 0x1);
+ }
MLX5_SET64(mkc, mkc, start_addr, attr->addr);
MLX5_SET64(mkc, mkc, len, attr->size);
mkey->obj = mlx5_glue->devx_obj_create(ctx, in, in_size_dw * 4, out,
diff --git a/drivers/common/mlx5/mlx5_devx_cmds.h b/drivers/common/mlx5/mlx5_devx_cmds.h
index 6912dc6..20bb294 100644
--- a/drivers/common/mlx5/mlx5_devx_cmds.h
+++ b/drivers/common/mlx5/mlx5_devx_cmds.h
@@ -33,6 +33,7 @@ struct mlx5_devx_mkey_attr {
uint32_t pd;
uint32_t log_entity_size;
uint32_t pg_access:1;
+ uint32_t relaxed_ordering:1;
struct mlx5_klm *klm_array;
int klm_num;
};
diff --git a/drivers/common/mlx5/mlx5_glue.h b/drivers/common/mlx5/mlx5_glue.h
index 6238b43..cd1136f 100644
--- a/drivers/common/mlx5/mlx5_glue.h
+++ b/drivers/common/mlx5/mlx5_glue.h
@@ -98,6 +98,10 @@
uint64_t comp_mask; };
#endif
+#ifndef IBV_ACCESS_RELAXED_ORDERING
+#define IBV_ACCESS_RELAXED_ORDERING 0
+#endif
+
/* LIB_GLUE_VERSION must be updated every time this structure is modified. */
struct mlx5_glue {
const char *version;
diff --git a/drivers/common/mlx5/mlx5_prm.h b/drivers/common/mlx5/mlx5_prm.h
index eee3a4b..00fd7c1 100644
--- a/drivers/common/mlx5/mlx5_prm.h
+++ b/drivers/common/mlx5/mlx5_prm.h
@@ -882,7 +882,9 @@ struct mlx5_ifc_mkc_bits {
u8 translations_octword_size[0x20];
- u8 reserved_at_1c0[0x1b];
+ u8 reserved_at_1c0[0x19];
+ u8 relaxed_ordering_read[0x1];
+ u8 reserved_at_1da[0x1];
u8 log_page_size[0x5];
u8 reserved_at_1e0[0x20];
diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index 2090631..809833b 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -3962,6 +3962,7 @@ struct field_modify_info modify_tcp[] = {
mkey_attr.pg_access = 0;
mkey_attr.klm_array = NULL;
mkey_attr.klm_num = 0;
+ mkey_attr.relaxed_ordering = 1;
mem_mng->dm = mlx5_devx_cmd_mkey_create(sh->ctx, &mkey_attr);
if (!mem_mng->dm) {
mlx5_glue->devx_umem_dereg(mem_mng->umem);
diff --git a/drivers/net/mlx5/mlx5_mr.c b/drivers/net/mlx5/mlx5_mr.c
index cb97c87..fd1245d 100644
--- a/drivers/net/mlx5/mlx5_mr.c
+++ b/drivers/net/mlx5/mlx5_mr.c
@@ -768,7 +768,8 @@ struct mr_update_mp_data {
* through mlx5_alloc_verbs_buf().
*/
mr->ibv_mr = mlx5_glue->reg_mr(sh->pd, (void *)data.start, len,
- IBV_ACCESS_LOCAL_WRITE);
+ IBV_ACCESS_LOCAL_WRITE |
+ IBV_ACCESS_RELAXED_ORDERING);
if (mr->ibv_mr == NULL) {
DEBUG("port %u fail to create a verbs MR for address (%p)",
dev->data->port_id, (void *)addr);
@@ -1217,7 +1218,8 @@ struct mr_update_mp_data {
if (mr == NULL)
return NULL;
mr->ibv_mr = mlx5_glue->reg_mr(priv->sh->pd, (void *)addr, len,
- IBV_ACCESS_LOCAL_WRITE);
+ IBV_ACCESS_LOCAL_WRITE |
+ IBV_ACCESS_RELAXED_ORDERING);
if (mr->ibv_mr == NULL) {
DRV_LOG(WARNING,
"port %u fail to create a verbs MR for address (%p)",
diff --git a/drivers/vdpa/mlx5/mlx5_vdpa_lm.c b/drivers/vdpa/mlx5/mlx5_vdpa_lm.c
index 3358704..4457760 100644
--- a/drivers/vdpa/mlx5/mlx5_vdpa_lm.c
+++ b/drivers/vdpa/mlx5/mlx5_vdpa_lm.c
@@ -39,6 +39,7 @@
.pg_access = 1,
.klm_array = NULL,
.klm_num = 0,
+ .relaxed_ordering = 0,
};
struct mlx5_devx_virtq_attr attr = {
.type = MLX5_VIRTQ_MODIFY_TYPE_DIRTY_BITMAP_PARAMS,
diff --git a/drivers/vdpa/mlx5/mlx5_vdpa_mem.c b/drivers/vdpa/mlx5/mlx5_vdpa_mem.c
index 398ca35..da31b47 100644
--- a/drivers/vdpa/mlx5/mlx5_vdpa_mem.c
+++ b/drivers/vdpa/mlx5/mlx5_vdpa_mem.c
@@ -263,6 +263,7 @@
mkey_attr.pg_access = 1;
mkey_attr.klm_array = NULL;
mkey_attr.klm_num = 0;
+ mkey_attr.relaxed_ordering = 0;
entry->mkey = mlx5_devx_cmd_mkey_create(priv->ctx, &mkey_attr);
if (!entry->mkey) {
DRV_LOG(ERR, "Failed to create direct Mkey.");
--
1.8.3.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dpdk-dev] [PATCH] net/mlx5: creating relaxed ordering memory regions
2020-03-24 11:39 [dpdk-dev] [PATCH] net/mlx5: creating relaxed ordering memory regions Shiri Kuzin
@ 2020-03-25 14:25 ` Raslan Darawsheh
0 siblings, 0 replies; 2+ messages in thread
From: Raslan Darawsheh @ 2020-03-25 14:25 UTC (permalink / raw)
To: Shiri Kuzin, dev; +Cc: Matan Azrad, Slava Ovsiienko
Hi,
> -----Original Message-----
> From: Shiri Kuzin <shirik@mellanox.com>
> Sent: Tuesday, March 24, 2020 1:40 PM
> To: dev@dpdk.org
> Cc: Matan Azrad <matan@mellanox.com>; Raslan Darawsheh
> <rasland@mellanox.com>; Slava Ovsiienko <viacheslavo@mellanox.com>
> Subject: [PATCH] net/mlx5: creating relaxed ordering memory regions
>
> In the current state, when preforming read/write
> transactions we must wait for a completion in order
> to run the next transaction, and all transactions are
> performed by order.
>
> Relaxed Ordering is a PCI optimization which by enabling it
> we allow the system to perform read/writes in a different
> order without having to wait for completion and improve
> the performance in that matter.
>
> This commit introduces the creation of relaxed ordering
> memory regions in mlx5.
> As relaxed ordering is an optimization, drivers that
> do not support it can simply ignore it and therefore
> it is enabled by default.
>
> Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
> Acked-by: Matan Azrad <matan@mellanox.com>
> ---
> doc/guides/rel_notes/release_20_05.rst | 2 +-
> drivers/common/mlx5/mlx5_devx_cmds.c | 4 ++++
> drivers/common/mlx5/mlx5_devx_cmds.h | 1 +
> drivers/common/mlx5/mlx5_glue.h | 4 ++++
> drivers/common/mlx5/mlx5_prm.h | 4 +++-
> drivers/net/mlx5/mlx5_flow_dv.c | 1 +
> drivers/net/mlx5/mlx5_mr.c | 6 ++++--
> drivers/vdpa/mlx5/mlx5_vdpa_lm.c | 1 +
> drivers/vdpa/mlx5/mlx5_vdpa_mem.c | 1 +
> 9 files changed, 20 insertions(+), 4 deletions(-)
>
> diff --git a/doc/guides/rel_notes/release_20_05.rst
> b/doc/guides/rel_notes/release_20_05.rst
> index 000bbf5..c960fd2 100644
> --- a/doc/guides/rel_notes/release_20_05.rst
> +++ b/doc/guides/rel_notes/release_20_05.rst
> @@ -61,7 +61,7 @@ New Features
> Updated Mellanox mlx5 driver with new features and improvements,
> including:
>
> * Added support for matching on IPv4 Time To Live and IPv6 Hop Limit.
> -
> + * Added support for creating Relaxed Ordering Memory Regions.
>
> Removed Items
> -------------
> diff --git a/drivers/common/mlx5/mlx5_devx_cmds.c
> b/drivers/common/mlx5/mlx5_devx_cmds.c
> index d960bc9..1157a44 100644
> --- a/drivers/common/mlx5/mlx5_devx_cmds.c
> +++ b/drivers/common/mlx5/mlx5_devx_cmds.c
> @@ -196,6 +196,10 @@ struct mlx5_devx_obj *
> MLX5_SET(mkc, mkc, pd, attr->pd);
> MLX5_SET(mkc, mkc, mkey_7_0, attr->umem_id & 0xFF);
> MLX5_SET(mkc, mkc, translations_octword_size, translation_size);
> + if (attr->relaxed_ordering == 1) {
> + MLX5_SET(mkc, mkc, relaxed_ordering_write, 0x1);
> + MLX5_SET(mkc, mkc, relaxed_ordering_read, 0x1);
> + }
> MLX5_SET64(mkc, mkc, start_addr, attr->addr);
> MLX5_SET64(mkc, mkc, len, attr->size);
> mkey->obj = mlx5_glue->devx_obj_create(ctx, in, in_size_dw * 4,
> out,
> diff --git a/drivers/common/mlx5/mlx5_devx_cmds.h
> b/drivers/common/mlx5/mlx5_devx_cmds.h
> index 6912dc6..20bb294 100644
> --- a/drivers/common/mlx5/mlx5_devx_cmds.h
> +++ b/drivers/common/mlx5/mlx5_devx_cmds.h
> @@ -33,6 +33,7 @@ struct mlx5_devx_mkey_attr {
> uint32_t pd;
> uint32_t log_entity_size;
> uint32_t pg_access:1;
> + uint32_t relaxed_ordering:1;
> struct mlx5_klm *klm_array;
> int klm_num;
> };
> diff --git a/drivers/common/mlx5/mlx5_glue.h
> b/drivers/common/mlx5/mlx5_glue.h
> index 6238b43..cd1136f 100644
> --- a/drivers/common/mlx5/mlx5_glue.h
> +++ b/drivers/common/mlx5/mlx5_glue.h
> @@ -98,6 +98,10 @@
> uint64_t comp_mask; };
> #endif
>
> +#ifndef IBV_ACCESS_RELAXED_ORDERING
> +#define IBV_ACCESS_RELAXED_ORDERING 0
> +#endif
> +
> /* LIB_GLUE_VERSION must be updated every time this structure is
> modified. */
> struct mlx5_glue {
> const char *version;
> diff --git a/drivers/common/mlx5/mlx5_prm.h
> b/drivers/common/mlx5/mlx5_prm.h
> index eee3a4b..00fd7c1 100644
> --- a/drivers/common/mlx5/mlx5_prm.h
> +++ b/drivers/common/mlx5/mlx5_prm.h
> @@ -882,7 +882,9 @@ struct mlx5_ifc_mkc_bits {
>
> u8 translations_octword_size[0x20];
>
> - u8 reserved_at_1c0[0x1b];
> + u8 reserved_at_1c0[0x19];
> + u8 relaxed_ordering_read[0x1];
> + u8 reserved_at_1da[0x1];
> u8 log_page_size[0x5];
>
> u8 reserved_at_1e0[0x20];
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c
> index 2090631..809833b 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -3962,6 +3962,7 @@ struct field_modify_info modify_tcp[] = {
> mkey_attr.pg_access = 0;
> mkey_attr.klm_array = NULL;
> mkey_attr.klm_num = 0;
> + mkey_attr.relaxed_ordering = 1;
> mem_mng->dm = mlx5_devx_cmd_mkey_create(sh->ctx,
> &mkey_attr);
> if (!mem_mng->dm) {
> mlx5_glue->devx_umem_dereg(mem_mng->umem);
> diff --git a/drivers/net/mlx5/mlx5_mr.c b/drivers/net/mlx5/mlx5_mr.c
> index cb97c87..fd1245d 100644
> --- a/drivers/net/mlx5/mlx5_mr.c
> +++ b/drivers/net/mlx5/mlx5_mr.c
> @@ -768,7 +768,8 @@ struct mr_update_mp_data {
> * through mlx5_alloc_verbs_buf().
> */
> mr->ibv_mr = mlx5_glue->reg_mr(sh->pd, (void *)data.start, len,
> - IBV_ACCESS_LOCAL_WRITE);
> + IBV_ACCESS_LOCAL_WRITE |
> + IBV_ACCESS_RELAXED_ORDERING);
> if (mr->ibv_mr == NULL) {
> DEBUG("port %u fail to create a verbs MR for address (%p)",
> dev->data->port_id, (void *)addr);
> @@ -1217,7 +1218,8 @@ struct mr_update_mp_data {
> if (mr == NULL)
> return NULL;
> mr->ibv_mr = mlx5_glue->reg_mr(priv->sh->pd, (void *)addr, len,
> - IBV_ACCESS_LOCAL_WRITE);
> + IBV_ACCESS_LOCAL_WRITE |
> + IBV_ACCESS_RELAXED_ORDERING);
> if (mr->ibv_mr == NULL) {
> DRV_LOG(WARNING,
> "port %u fail to create a verbs MR for address (%p)",
> diff --git a/drivers/vdpa/mlx5/mlx5_vdpa_lm.c
> b/drivers/vdpa/mlx5/mlx5_vdpa_lm.c
> index 3358704..4457760 100644
> --- a/drivers/vdpa/mlx5/mlx5_vdpa_lm.c
> +++ b/drivers/vdpa/mlx5/mlx5_vdpa_lm.c
> @@ -39,6 +39,7 @@
> .pg_access = 1,
> .klm_array = NULL,
> .klm_num = 0,
> + .relaxed_ordering = 0,
> };
> struct mlx5_devx_virtq_attr attr = {
> .type =
> MLX5_VIRTQ_MODIFY_TYPE_DIRTY_BITMAP_PARAMS,
> diff --git a/drivers/vdpa/mlx5/mlx5_vdpa_mem.c
> b/drivers/vdpa/mlx5/mlx5_vdpa_mem.c
> index 398ca35..da31b47 100644
> --- a/drivers/vdpa/mlx5/mlx5_vdpa_mem.c
> +++ b/drivers/vdpa/mlx5/mlx5_vdpa_mem.c
> @@ -263,6 +263,7 @@
> mkey_attr.pg_access = 1;
> mkey_attr.klm_array = NULL;
> mkey_attr.klm_num = 0;
> + mkey_attr.relaxed_ordering = 0;
> entry->mkey = mlx5_devx_cmd_mkey_create(priv->ctx,
> &mkey_attr);
> if (!entry->mkey) {
> DRV_LOG(ERR, "Failed to create direct Mkey.");
> --
> 1.8.3.1
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-03-25 14:25 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-24 11:39 [dpdk-dev] [PATCH] net/mlx5: creating relaxed ordering memory regions Shiri Kuzin
2020-03-25 14:25 ` Raslan Darawsheh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).