From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from dpdk.org (dpdk.org [92.243.14.124]) by inbox.dpdk.org (Postfix) with ESMTP id 0F384A057B; Tue, 24 Mar 2020 13:59:17 +0100 (CET) Received: from [92.243.14.124] (localhost [127.0.0.1]) by dpdk.org (Postfix) with ESMTP id E6A3C1C0CF; Tue, 24 Mar 2020 13:59:16 +0100 (CET) Received: from git-send-mailer.rdmz.labs.mlnx (unknown [37.142.13.130]) by dpdk.org (Postfix) with ESMTP id 701741C0C3 for ; Tue, 24 Mar 2020 13:59:15 +0100 (CET) From: Bing Zhao To: orika@mellanox.com, matan@mellanox.com Cc: rasland@mellanox.com, viacheslavo@mellanox.com, dev@dpdk.org Date: Tue, 24 Mar 2020 20:59:01 +0800 Message-Id: <1585054741-233903-1-git-send-email-bingz@mellanox.com> X-Mailer: git-send-email 1.8.3.1 In-Reply-To: References: Subject: [dpdk-dev] [PATCH] net/mlx5: introduce dev parameter for hairpin X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" When creating a hairpin queue, the total data size and the maximal number of packets are interrelated. The differ is the stride size. Larger buffer size means big packet like jumbo could be supported, but in the meanwhile, it will introduce more cache misses and have a side effect on the performance. Now a new device parameter "hp_buf_log_sz" is introduced for applications to set the total data buffer size (the logarithm value). Then the maximal number of packets will also be calculated automaticlly by this value. Applications could also change this value to a larger one in order to support larger packets in hairpin case. A smaller value will be beneficial for memory consumption. If it is not set, the default value will be used. Signed-off-by: Bing Zhao --- drivers/net/mlx5/mlx5.c | 10 ++++++++++ drivers/net/mlx5/mlx5.h | 1 + drivers/net/mlx5/mlx5_defs.h | 2 +- drivers/net/mlx5/mlx5_rxq.c | 17 ++++++++++++++--- drivers/net/mlx5/mlx5_txq.c | 17 ++++++++++++++--- 5 files changed, 40 insertions(+), 7 deletions(-) diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index 94aaa60..3e6eaa0 100644 --- a/drivers/net/mlx5/mlx5.c +++ b/drivers/net/mlx5/mlx5.c @@ -150,6 +150,12 @@ /* Configure timeout of LRO session (in microseconds). */ #define MLX5_LRO_TIMEOUT_USEC "lro_timeout_usec" +/* + * Device parameter to configure the total data buffer size for a single + * hairpin queue (logarithm value). + */ +#define MLX5_HP_BUF_SIZE "hp_buf_log_sz" + #ifndef HAVE_IBV_MLX5_MOD_MPW #define MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED (1 << 2) #define MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW (1 << 3) @@ -1580,6 +1586,8 @@ struct mlx5_flow_id_pool * config->lro.timeout = tmp; } else if (strcmp(MLX5_CLASS_ARG_NAME, key) == 0) { DRV_LOG(DEBUG, "class argument is %s.", val); + } else if (strcmp(MLX5_HP_BUF_SIZE, key) == 0) { + config->log_hp_size = tmp; } else { DRV_LOG(WARNING, "%s: unknown parameter", key); rte_errno = EINVAL; @@ -1632,6 +1640,7 @@ struct mlx5_flow_id_pool * MLX5_MAX_DUMP_FILES_NUM, MLX5_LRO_TIMEOUT_USEC, MLX5_CLASS_ARG_NAME, + MLX5_HP_BUF_SIZE, NULL, }; struct rte_kvargs *kvlist; @@ -3342,6 +3351,7 @@ struct mlx5_flow_id_pool * }, .dv_esw_en = 1, .dv_flow_en = 1, + .log_hp_size = MLX5_ARG_UNSET, }; /* Device specific configuration. */ switch (pci_dev->id.device_id) { diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index d7c519b..53f35fd 100644 --- a/drivers/net/mlx5/mlx5.h +++ b/drivers/net/mlx5/mlx5.h @@ -191,6 +191,7 @@ struct mlx5_dev_config { unsigned int tso_max_payload_sz; /* Maximum TCP payload for TSO. */ unsigned int ind_table_max_size; /* Maximum indirection table size. */ unsigned int max_dump_files_num; /* Maximum dump files per queue. */ + unsigned int log_hp_size; /* Single hairpin queue data size in total. */ int txqs_inline; /* Queue number threshold for inlining. */ int txq_inline_min; /* Minimal amount of data bytes to inline. */ int txq_inline_max; /* Max packet size for inlining with SEND. */ diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h index 83ca367..19e8253 100644 --- a/drivers/net/mlx5/mlx5_defs.h +++ b/drivers/net/mlx5/mlx5_defs.h @@ -175,7 +175,7 @@ /* Hairpin TX/RX queue configuration parameters. */ #define MLX5_HAIRPIN_QUEUE_STRIDE 6 -#define MLX5_HAIRPIN_JUMBO_LOG_SIZE (15 + 2) +#define MLX5_HAIRPIN_JUMBO_LOG_SIZE (14 + 2) /* Definition of static_assert found in /usr/include/assert.h */ #ifndef HAVE_STATIC_ASSERT diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c index 8a6b410..3fdb632 100644 --- a/drivers/net/mlx5/mlx5_rxq.c +++ b/drivers/net/mlx5/mlx5_rxq.c @@ -1286,9 +1286,20 @@ attr.hairpin = 1; max_wq_data = priv->config.hca_attr.log_max_hairpin_wq_data_sz; /* Jumbo frames > 9KB should be supported, and more packets. */ - attr.wq_attr.log_hairpin_data_sz = - (max_wq_data < MLX5_HAIRPIN_JUMBO_LOG_SIZE) ? - max_wq_data : MLX5_HAIRPIN_JUMBO_LOG_SIZE; + if (priv->config.log_hp_size != (uint32_t)MLX5_ARG_UNSET) { + if (priv->config.log_hp_size > max_wq_data) { + DRV_LOG(ERR, "total data size %u power of 2 is " + "too large for hairpin", + priv->config.log_hp_size); + rte_errno = ERANGE; + return NULL; + } + attr.wq_attr.log_hairpin_data_sz = priv->config.log_hp_size; + } else { + attr.wq_attr.log_hairpin_data_sz = + (max_wq_data < MLX5_HAIRPIN_JUMBO_LOG_SIZE) ? + max_wq_data : MLX5_HAIRPIN_JUMBO_LOG_SIZE; + } /* Set the packets number to the maximum value for performance. */ attr.wq_attr.log_hairpin_num_packets = attr.wq_attr.log_hairpin_data_sz - diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c index 57bc116..0653f4c 100644 --- a/drivers/net/mlx5/mlx5_txq.c +++ b/drivers/net/mlx5/mlx5_txq.c @@ -512,9 +512,20 @@ attr.tis_lst_sz = 1; max_wq_data = priv->config.hca_attr.log_max_hairpin_wq_data_sz; /* Jumbo frames > 9KB should be supported, and more packets. */ - attr.wq_attr.log_hairpin_data_sz = - (max_wq_data < MLX5_HAIRPIN_JUMBO_LOG_SIZE) ? - max_wq_data : MLX5_HAIRPIN_JUMBO_LOG_SIZE; + if (priv->config.log_hp_size != (uint32_t)MLX5_ARG_UNSET) { + if (priv->config.log_hp_size > max_wq_data) { + DRV_LOG(ERR, "total data size %u power of 2 is " + "too large for hairpin", + priv->config.log_hp_size); + rte_errno = ERANGE; + return NULL; + } + attr.wq_attr.log_hairpin_data_sz = priv->config.log_hp_size; + } else { + attr.wq_attr.log_hairpin_data_sz = + (max_wq_data < MLX5_HAIRPIN_JUMBO_LOG_SIZE) ? + max_wq_data : MLX5_HAIRPIN_JUMBO_LOG_SIZE; + } /* Set the packets number to the maximum value for performance. */ attr.wq_attr.log_hairpin_num_packets = attr.wq_attr.log_hairpin_data_sz - -- 1.8.3.1