From: Nicolas Chautru <nicolas.chautru@intel.com>
To: dev@dpdk.org, akhil.goyal@nxp.com
Cc: bruce.richardson@intel.com, Nicolas Chautru <nicolas.chautru@intel.com>
Subject: [dpdk-dev] [PATCH v2 04/13] baseband/fpga_5gnr_fec: add register definition file
Date: Sun, 29 Mar 2020 17:02:51 -0700 [thread overview]
Message-ID: <1585526580-113508-5-git-send-email-nicolas.chautru@intel.com> (raw)
In-Reply-To: <1585526580-113508-1-git-send-email-nicolas.chautru@intel.com>
Add in the list of registers for the device and related
HW specs definitions.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h | 189 +++++++++++++++++++++
1 file changed, 189 insertions(+)
diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
index aeb1e94..b1416f6 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
@@ -30,6 +30,195 @@
#define FPGA_5GNR_FEC_PF_DEVICE_ID (0x0D8F)
#define FPGA_5GNR_FEC_VF_DEVICE_ID (0x0D90)
+/* Align DMA descriptors to 256 bytes - cache-aligned */
+#define FPGA_RING_DESC_ENTRY_LENGTH (8)
+/* Ring size is in 256 bits (32 bytes) units */
+#define FPGA_RING_DESC_LEN_UNIT_BYTES (32)
+/* Maximum size of queue */
+#define FPGA_RING_MAX_SIZE (1024)
+#define FPGA_FLR_TIMEOUT_UNIT (16.384)
+
+#define FPGA_NUM_UL_QUEUES (32)
+#define FPGA_NUM_DL_QUEUES (32)
+#define FPGA_TOTAL_NUM_QUEUES (FPGA_NUM_UL_QUEUES + FPGA_NUM_DL_QUEUES)
+#define FPGA_NUM_INTR_VEC (FPGA_TOTAL_NUM_QUEUES - RTE_INTR_VEC_RXTX_OFFSET)
+
+#define FPGA_INVALID_HW_QUEUE_ID (0xFFFFFFFF)
+
+#define FPGA_QUEUE_FLUSH_TIMEOUT_US (1000)
+#define FPGA_HARQ_RDY_TIMEOUT (10)
+#define FPGA_TIMEOUT_CHECK_INTERVAL (5)
+#define FPGA_DDR_OVERFLOW (0x10)
+
+#define FPGA_5GNR_FEC_DDR_WR_DATA_LEN_IN_BYTES 8
+#define FPGA_5GNR_FEC_DDR_RD_DATA_LEN_IN_BYTES 8
+
+
+/* FPGA 5GNR FEC Register mapping on BAR0 */
+enum {
+ FPGA_5GNR_FEC_VERSION_ID = 0x00000000, /* len: 4B */
+ FPGA_5GNR_FEC_CONFIGURATION = 0x00000004, /* len: 2B */
+ FPGA_5GNR_FEC_QUEUE_PF_VF_MAP_DONE = 0x00000008, /* len: 1B */
+ FPGA_5GNR_FEC_LOAD_BALANCE_FACTOR = 0x0000000a, /* len: 2B */
+ FPGA_5GNR_FEC_RING_DESC_LEN = 0x0000000c, /* len: 2B */
+ FPGA_5GNR_FEC_FLR_TIME_OUT = 0x0000000e, /* len: 2B */
+ FPGA_5GNR_FEC_VFQ_FLUSH_STATUS_LW = 0x00000018, /* len: 4B */
+ FPGA_5GNR_FEC_VFQ_FLUSH_STATUS_HI = 0x0000001c, /* len: 4B */
+ FPGA_5GNR_FEC_QUEUE_MAP = 0x00000040, /* len: 256B */
+ FPGA_5GNR_FEC_RING_CTRL_REGS = 0x00000200, /* len: 2048B */
+ FPGA_5GNR_FEC_DDR4_WR_ADDR_REGS = 0x00000A00, /* len: 4B */
+ FPGA_5GNR_FEC_DDR4_WR_DATA_REGS = 0x00000A08, /* len: 8B */
+ FPGA_5GNR_FEC_DDR4_WR_DONE_REGS = 0x00000A10, /* len: 1B */
+ FPGA_5GNR_FEC_DDR4_RD_ADDR_REGS = 0x00000A18, /* len: 4B */
+ FPGA_5GNR_FEC_DDR4_RD_DONE_REGS = 0x00000A20, /* len: 1B */
+ FPGA_5GNR_FEC_DDR4_RD_RDY_REGS = 0x00000A28, /* len: 1B */
+ FPGA_5GNR_FEC_DDR4_RD_DATA_REGS = 0x00000A30, /* len: 8B */
+ FPGA_5GNR_FEC_DDR4_ADDR_RDY_REGS = 0x00000A38, /* len: 1B */
+ FPGA_5GNR_FEC_HARQ_BUF_SIZE_RDY_REGS = 0x00000A40, /* len: 1B */
+ FPGA_5GNR_FEC_HARQ_BUF_SIZE_REGS = 0x00000A48 /* len: 4B */
+};
+
+/* FPGA 5GNR FEC Ring Control Registers */
+enum {
+ FPGA_5GNR_FEC_RING_HEAD_ADDR = 0x00000008,
+ FPGA_5GNR_FEC_RING_SIZE = 0x00000010,
+ FPGA_5GNR_FEC_RING_MISC = 0x00000014,
+ FPGA_5GNR_FEC_RING_ENABLE = 0x00000015,
+ FPGA_5GNR_FEC_RING_FLUSH_QUEUE_EN = 0x00000016,
+ FPGA_5GNR_FEC_RING_SHADOW_TAIL = 0x00000018,
+ FPGA_5GNR_FEC_RING_HEAD_POINT = 0x0000001C
+};
+
+/* FPGA 5GNR FEC DESCRIPTOR ERROR */
+enum {
+ DESC_ERR_NO_ERR = 0x0,
+ DESC_ERR_K_P_OUT_OF_RANGE = 0x1,
+ DESC_ERR_Z_C_NOT_LEGAL = 0x2,
+ DESC_ERR_DESC_OFFSET_ERR = 0x3,
+ DESC_ERR_DESC_READ_FAIL = 0x8,
+ DESC_ERR_DESC_READ_TIMEOUT = 0x9,
+ DESC_ERR_DESC_READ_TLP_POISONED = 0xA,
+ DESC_ERR_CB_READ_FAIL = 0xC,
+ DESC_ERR_CB_READ_TIMEOUT = 0xD,
+ DESC_ERR_CB_READ_TLP_POISONED = 0xE,
+ DESC_ERR_HBSTORE_ERR = 0xF
+};
+
+
+/* FPGA 5GNR FEC DMA Encoding Request Descriptor */
+struct __attribute__((__packed__)) fpga_dma_enc_desc {
+ uint32_t done:1,
+ rsrvd0:7,
+ error:4,
+ rsrvd1:4,
+ num_null:10,
+ rsrvd2:6;
+ uint32_t ncb:15,
+ rsrvd3:1,
+ k0:16;
+ uint32_t irq_en:1,
+ crc_en:1,
+ rsrvd4:1,
+ qm_idx:3,
+ bg_idx:1,
+ zc:9,
+ desc_idx:10,
+ rsrvd5:6;
+ uint16_t rm_e;
+ uint16_t k_;
+ uint32_t out_addr_lw;
+ uint32_t out_addr_hi;
+ uint32_t in_addr_lw;
+ uint32_t in_addr_hi;
+
+ union {
+ struct {
+ /* Virtual addresses used to retrieve SW context info */
+ void *op_addr;
+ /* Stores information about total number of Code Blocks
+ * in currently processed Transport Block
+ */
+ uint64_t cbs_in_op;
+ };
+
+ uint8_t sw_ctxt[FPGA_RING_DESC_LEN_UNIT_BYTES *
+ (FPGA_RING_DESC_ENTRY_LENGTH - 1)];
+ };
+};
+
+
+/* FPGA 5GNR DPC FEC DMA Decoding Request Descriptor */
+struct __attribute__((__packed__)) fpga_dma_dec_desc {
+ uint32_t done:1,
+ iter:5,
+ et_pass:1,
+ crcb_pass:1,
+ error:4,
+ qm_idx:3,
+ max_iter:5,
+ bg_idx:1,
+ rsrvd0:1,
+ harqin_en:1,
+ zc:9;
+ uint32_t hbstroe_offset:22,
+ num_null:10;
+ uint32_t irq_en:1,
+ ncb:15,
+ desc_idx:10,
+ drop_crc24b:1,
+ crc24b_ind:1,
+ rv:2,
+ et_dis:1,
+ rsrvd2:1;
+ uint32_t harq_input_length:16,
+ rm_e:16;/*the inbound data byte length*/
+ uint32_t out_addr_lw;
+ uint32_t out_addr_hi;
+ uint32_t in_addr_lw;
+ uint32_t in_addr_hi;
+
+ union {
+ struct {
+ /* Virtual addresses used to retrieve SW context info */
+ void *op_addr;
+ /* Stores information about total number of Code Blocks
+ * in currently processed Transport Block
+ */
+ uint8_t cbs_in_op;
+ };
+
+ uint32_t sw_ctxt[8 * (FPGA_RING_DESC_ENTRY_LENGTH - 1)];
+ };
+};
+
+/* FPGA 5GNR DMA Descriptor */
+union fpga_dma_desc {
+ struct fpga_dma_enc_desc enc_req;
+ struct fpga_dma_dec_desc dec_req;
+};
+
+/* FPGA 5GNR FEC Ring Control Register */
+struct __attribute__((__packed__)) fpga_ring_ctrl_reg {
+ uint64_t ring_base_addr;
+ uint64_t ring_head_addr;
+ uint16_t ring_size:11;
+ uint16_t rsrvd0;
+ union { /* Miscellaneous register */
+ uint8_t misc;
+ uint8_t max_ul_dec:5,
+ max_ul_dec_en:1,
+ rsrvd1:2;
+ };
+ uint8_t enable;
+ uint8_t flush_queue_en;
+ uint8_t rsrvd2;
+ uint16_t shadow_tail;
+ uint16_t rsrvd3;
+ uint16_t head_point;
+ uint16_t rsrvd4;
+
+};
+
/* Private data structure for each FPGA FEC device */
struct fpga_5gnr_fec_device {
/** Base address of MMIO registers (BAR0) */
--
1.8.3.1
next prev parent reply other threads:[~2020-03-30 0:04 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-30 0:02 [dpdk-dev] [PATCH v2 00/13] drivers/baseband: add PMD for FPGA 5GNR FEC Nicolas Chautru
2020-03-30 0:02 ` [dpdk-dev] [PATCH v2 01/13] bbdev: add capability flag for filler bits inclusion in HARQ Nicolas Chautru
2020-03-30 0:02 ` [dpdk-dev] [PATCH v2 02/13] bbdev: expose device HARQ buffer size at device level Nicolas Chautru
2020-03-30 0:02 ` [dpdk-dev] [PATCH v2 03/13] drivers/baseband: add PMD for FPGA 5GNR FEC Nicolas Chautru
2020-03-30 0:02 ` Nicolas Chautru [this message]
2020-03-30 0:02 ` [dpdk-dev] [PATCH v2 05/13] baseband/fpga_5gnr_fec: add device info_get function Nicolas Chautru
2020-04-16 18:15 ` Akhil Goyal
2020-04-16 21:20 ` Chautru, Nicolas
2020-03-30 0:02 ` [dpdk-dev] [PATCH v2 06/13] baseband/fpga_5gnr_fec: add queue configuration Nicolas Chautru
2020-04-11 3:13 ` Xu, Rosen
2020-04-14 0:16 ` Chautru, Nicolas
2020-04-15 6:13 ` Xu, Rosen
2020-04-15 15:51 ` Chautru, Nicolas
2020-04-16 1:09 ` Xu, Rosen
2020-03-30 0:02 ` [dpdk-dev] [PATCH v2 07/13] baseband/fpga_5gnr_fec: add LDPC processing functions Nicolas Chautru
2020-03-30 0:02 ` [dpdk-dev] [PATCH v2 08/13] baseband/fpga_5gnr_fec: add HW error capture Nicolas Chautru
2020-03-30 0:02 ` [dpdk-dev] [PATCH v2 09/13] baseband/fpga_5gnr_fec: add debug functionality Nicolas Chautru
2020-03-30 0:02 ` [dpdk-dev] [PATCH v2 10/13] baseband/fpga_5gnr_fec: add configure function Nicolas Chautru
2020-04-15 15:40 ` Power, Niall
2020-04-16 19:30 ` Akhil Goyal
2020-04-16 21:45 ` Chautru, Nicolas
2020-05-01 23:15 ` Chautru, Nicolas
2020-05-04 17:19 ` Thomas Monjalon
2020-06-25 0:30 ` Chautru, Nicolas
2020-06-25 8:13 ` Thomas Monjalon
2020-06-26 1:14 ` Chautru, Nicolas
2020-06-26 10:08 ` Thomas Monjalon
2020-07-10 22:48 ` Chautru, Nicolas
2020-03-30 0:02 ` [dpdk-dev] [PATCH v2 11/13] baseband/fpga_5gnr_fec: add harq loopback capability Nicolas Chautru
2020-03-30 0:02 ` [dpdk-dev] [PATCH v2 12/13] baseband/fpga_5gnr_fec: add interrupt support Nicolas Chautru
2020-04-16 18:43 ` Akhil Goyal
2020-03-30 0:03 ` [dpdk-dev] [PATCH v2 13/13] doc: add feature matrix table for bbdev devices Nicolas Chautru
2020-04-15 15:40 ` [dpdk-dev] [PATCH v2 00/13] drivers/baseband: add PMD for FPGA 5GNR FEC Power, Niall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1585526580-113508-5-git-send-email-nicolas.chautru@intel.com \
--to=nicolas.chautru@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).