[dpdk-dev] [PATCH 1/4] net/mlx5: add a devarg to specify MPRQ stride size

[Alexander Kozyrev <akozyrev@mellanox.com>]

Define a device parameter to configure log 2 of a stride size for MPRQ
- mprq_log_stride_size. User is able to specify a stride size in a range
allowed by an underlying hardware. The default stride size is defined as
2048 bytes to encompass most commonly used packet sizes in the Internet
(MTU 1518 and less) and will be used in case a maximum configured packet
size cannot fit into the largest possible stride size. Otherwise a
stride size is set to a large enough value to encompass a whole packet.

Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
---
 drivers/net/mlx5/mlx5.c      | 34 +++++++++++++++++++++++++++-------
 drivers/net/mlx5/mlx5.h      |  1 +
 drivers/net/mlx5/mlx5_defs.h |  3 +++
 drivers/net/mlx5/mlx5_rxq.c  | 22 +++++++++++++---------
 4 files changed, 44 insertions(+), 16 deletions(-)

diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 6a11b14..a2ba6d3 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -63,6 +63,9 @@
 /* Device parameter to configure log 2 of the number of strides for MPRQ. */
 #define MLX5_RX_MPRQ_LOG_STRIDE_NUM "mprq_log_stride_num"
 
+/* Device parameter to configure log 2 of the stride size for MPRQ. */
+#define MLX5_RX_MPRQ_LOG_STRIDE_SIZE "mprq_log_stride_size"
+
 /* Device parameter to limit the size of memcpy'd packet for MPRQ. */
 #define MLX5_RX_MPRQ_MAX_MEMCPY_LEN "mprq_max_memcpy_len"
 
@@ -1531,6 +1534,8 @@ struct mlx5_flow_id_pool *
 		config->mprq.enabled = !!tmp;
 	} else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_NUM, key) == 0) {
 		config->mprq.stride_num_n = tmp;
+	} else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_SIZE, key) == 0) {
+		config->mprq.stride_size_n = tmp;
 	} else if (strcmp(MLX5_RX_MPRQ_MAX_MEMCPY_LEN, key) == 0) {
 		config->mprq.max_memcpy_len = tmp;
 	} else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) {
@@ -1627,6 +1632,7 @@ struct mlx5_flow_id_pool *
 		MLX5_RXQ_PKT_PAD_EN,
 		MLX5_RX_MPRQ_EN,
 		MLX5_RX_MPRQ_LOG_STRIDE_NUM,
+		MLX5_RX_MPRQ_LOG_STRIDE_SIZE,
 		MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
 		MLX5_RXQS_MIN_MPRQ,
 		MLX5_TXQ_INLINE,
@@ -2302,8 +2308,6 @@ struct mlx5_flow_id_pool *
 			mprq_caps.min_single_wqe_log_num_of_strides;
 		mprq_max_stride_num_n =
 			mprq_caps.max_single_wqe_log_num_of_strides;
-		config.mprq.stride_num_n = RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
-						   mprq_min_stride_num_n);
 	}
 #endif
 	if (RTE_CACHE_LINE_SIZE == 128 &&
@@ -2617,17 +2621,32 @@ struct mlx5_flow_id_pool *
 #endif
 	}
 	if (config.mprq.enabled && mprq) {
-		if (config.mprq.stride_num_n > mprq_max_stride_num_n ||
-		    config.mprq.stride_num_n < mprq_min_stride_num_n) {
+		if (config.mprq.stride_num_n &&
+		    (config.mprq.stride_num_n > mprq_max_stride_num_n ||
+		     config.mprq.stride_num_n < mprq_min_stride_num_n)) {
 			config.mprq.stride_num_n =
-				RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
-					mprq_min_stride_num_n);
+				RTE_MIN(RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
+						mprq_min_stride_num_n),
+					mprq_max_stride_num_n);
 			DRV_LOG(WARNING,
 				"the number of strides"
 				" for Multi-Packet RQ is out of range,"
 				" setting default value (%u)",
 				1 << config.mprq.stride_num_n);
 		}
+		if (config.mprq.stride_size_n &&
+		    (config.mprq.stride_size_n > mprq_max_stride_size_n ||
+		     config.mprq.stride_size_n < mprq_min_stride_size_n)) {
+			config.mprq.stride_size_n =
+				RTE_MIN(RTE_MAX(MLX5_MPRQ_STRIDE_SIZE_N,
+						mprq_min_stride_size_n),
+					mprq_max_stride_size_n);
+			DRV_LOG(WARNING,
+				"the size of a stride"
+				" for Multi-Packet RQ is out of range,"
+				" setting default value (%u)",
+				1 << config.mprq.stride_size_n);
+		}
 		config.mprq.min_stride_size_n = mprq_min_stride_size_n;
 		config.mprq.max_stride_size_n = mprq_max_stride_size_n;
 	} else if (config.mprq.enabled && !mprq) {
@@ -3361,7 +3380,8 @@ struct mlx5_flow_id_pool *
 		.mr_ext_memseg_en = 1,
 		.mprq = {
 			.enabled = 0, /* Disabled by default. */
-			.stride_num_n = MLX5_MPRQ_STRIDE_NUM_N,
+			.stride_num_n = 0,
+			.stride_size_n = 0,
 			.max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN,
 			.min_rxqs_num = MLX5_MPRQ_MIN_RXQS,
 		},
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 62b0810..c8e2454 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -176,6 +176,7 @@ struct mlx5_dev_config {
 	struct {
 		unsigned int enabled:1; /* Whether MPRQ is enabled. */
 		unsigned int stride_num_n; /* Number of strides. */
+		unsigned int stride_size_n; /* Size of a stride. */
 		unsigned int min_stride_size_n; /* Min size of a stride. */
 		unsigned int max_stride_size_n; /* Max size of a stride. */
 		unsigned int max_memcpy_len;
diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h
index 19e8253..260f584 100644
--- a/drivers/net/mlx5/mlx5_defs.h
+++ b/drivers/net/mlx5/mlx5_defs.h
@@ -143,6 +143,9 @@
 /* Log 2 of the default number of strides per WQE for Multi-Packet RQ. */
 #define MLX5_MPRQ_STRIDE_NUM_N 6U
 
+/* Log 2 of the default size of a stride per WQE for Multi-Packet RQ. */
+#define MLX5_MPRQ_STRIDE_SIZE_N 11U
+
 /* Two-byte shift is disabled for Multi-Packet RQ. */
 #define MLX5_MPRQ_TWO_BYTE_SHIFT 0
 
diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index 0a95e3c..85fcfe6 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -1856,25 +1856,26 @@ struct mlx5_rxq_ctrl *
 		strd_headroom_en = 1;
 		mprq_stride_size = non_scatter_min_mbuf_size;
 	}
+	if (!config->mprq.stride_num_n)
+		config->mprq.stride_num_n = MLX5_MPRQ_STRIDE_NUM_N;
+	if (!config->mprq.stride_size_n)
+		config->mprq.stride_size_n = (mprq_stride_size <=
+				(1U << config->mprq.max_stride_size_n)) ?
+			log2above(mprq_stride_size) : MLX5_MPRQ_STRIDE_SIZE_N;
 	/*
 	 * This Rx queue can be configured as a Multi-Packet RQ if all of the
 	 * following conditions are met:
 	 *  - MPRQ is enabled.
 	 *  - The number of descs is more than the number of strides.
-	 *  - max_rx_pkt_len plus overhead is less than the max size of a
-	 *    stride.
 	 *  Otherwise, enable Rx scatter if necessary.
 	 */
-	if (mprq_en &&
-	    desc > (1U << config->mprq.stride_num_n) &&
-	    mprq_stride_size <= (1U << config->mprq.max_stride_size_n)) {
+	if (mprq_en && desc > (1U << config->mprq.stride_num_n)) {
 		/* TODO: Rx scatter isn't supported yet. */
 		tmpl->rxq.sges_n = 0;
 		/* Trim the number of descs needed. */
 		desc >>= config->mprq.stride_num_n;
 		tmpl->rxq.strd_num_n = config->mprq.stride_num_n;
-		tmpl->rxq.strd_sz_n = RTE_MAX(log2above(mprq_stride_size),
-					      config->mprq.min_stride_size_n);
+		tmpl->rxq.strd_sz_n = config->mprq.stride_size_n;
 		tmpl->rxq.strd_shift_en = MLX5_MPRQ_TWO_BYTE_SHIFT;
 		tmpl->rxq.strd_headroom_en = strd_headroom_en;
 		tmpl->rxq.mprq_max_memcpy_len = RTE_MIN(first_mb_free_size,
@@ -1924,9 +1925,12 @@ struct mlx5_rxq_ctrl *
 		DRV_LOG(WARNING,
 			"port %u MPRQ is requested but cannot be enabled"
 			" (requested: desc = %u, stride_sz = %u,"
-			" supported: min_stride_num = %u, max_stride_sz = %u).",
-			dev->data->port_id, desc, mprq_stride_size,
+			" supported: min_stride_num = %u, min_stride_sz = %u,"
+			"max_stride_sz = %u).",
+			dev->data->port_id, desc,
+			(1 << config->mprq.stride_size_n),
 			(1 << config->mprq.stride_num_n),
+			(1 << config->mprq.min_stride_size_n),
 			(1 << config->mprq.max_stride_size_n));
 	DRV_LOG(DEBUG, "port %u maximum number of segments per packet: %u",
 		dev->data->port_id, 1 << tmpl->rxq.sges_n);
-- 
1.8.3.1