From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from dpdk.org (dpdk.org [92.243.14.124]) by inbox.dpdk.org (Postfix) with ESMTP id 4023AA0562; Thu, 2 Apr 2020 20:12:11 +0200 (CEST) Received: from [92.243.14.124] (localhost [127.0.0.1]) by dpdk.org (Postfix) with ESMTP id C463E1BEA8; Thu, 2 Apr 2020 20:11:55 +0200 (CEST) Received: from mellanox.co.il (mail-il-dmz.mellanox.com [193.47.165.129]) by dpdk.org (Postfix) with ESMTP id AF4CE1BE96 for ; Thu, 2 Apr 2020 20:11:53 +0200 (CEST) Received: from Internal Mail-Server by MTLPINE1 (envelope-from akozyrev@mellanox.com) with ESMTPS (AES256-SHA encrypted); 2 Apr 2020 21:11:49 +0300 Received: from pegasus02.mtr.labs.mlnx. (pegasus02.mtr.labs.mlnx [10.210.16.122]) by labmailer.mlnx (8.13.8/8.13.8) with ESMTP id 032IBnQs028687; Thu, 2 Apr 2020 21:11:49 +0300 From: Alexander Kozyrev To: dev@dpdk.org Cc: rasland@mellanox.com, matan@mellanox.com, viacheslavo@mellanox.com Date: Thu, 2 Apr 2020 18:11:46 +0000 Message-Id: <1585851108-485-2-git-send-email-akozyrev@mellanox.com> X-Mailer: git-send-email 1.8.3.1 In-Reply-To: <1585851108-485-1-git-send-email-akozyrev@mellanox.com> References: <1585691559-17409-1-git-send-email-akozyrev@mellanox.com> <1585851108-485-1-git-send-email-akozyrev@mellanox.com> Subject: [dpdk-dev] [PATCH 1/3] net/mlx5: add a devarg to specify MPRQ stride size X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" Define a device parameter to configure log 2 of a stride size for MPRQ - mprq_log_stride_size. User is able to specify a stride size in a range allowed by an underlying hardware. The default stride size is defined as 2048 bytes to encompass most commonly used packet sizes in the Internet (MTU 1518 and less) and will be used in case a maximum configured packet size cannot fit into the largest possible stride size. Otherwise a stride size is set to a large enough value to encompass a whole packet. Signed-off-by: Alexander Kozyrev Acked-by: Viacheslav Ovsiienko --- doc/guides/nics/mlx5.rst | 9 +++++++++ doc/guides/rel_notes/release_20_05.rst | 1 + drivers/net/mlx5/mlx5.c | 34 +++++++++++++++++++++++++++------- drivers/net/mlx5/mlx5.h | 1 + drivers/net/mlx5/mlx5_defs.h | 3 +++ drivers/net/mlx5/mlx5_rxq.c | 28 +++++++++++++++++----------- 6 files changed, 58 insertions(+), 18 deletions(-) diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index e13c07d..4e8c130 100644 --- a/doc/guides/nics/mlx5.rst +++ b/doc/guides/nics/mlx5.rst @@ -434,6 +434,15 @@ Run-time configuration The size of Rx queue should be bigger than the number of strides. +- ``mprq_log_stride_size`` parameter [int] + + Log 2 of the size of a stride for Multi-Packet Rx queue. Configuring a smaller + stride size can save some memory and reduce probability of a depletion of all + available strides due to unreleased packets by an application. If configured + value is not in the range of device capability, the default value will be set + with a warning message. The default value is 11 which is 2048 bytes per a + stride, valid only if ``mprq_en`` is set. + - ``mprq_max_memcpy_len`` parameter [int] The maximum length of packet to memcpy in case of Multi-Packet Rx queue. Rx diff --git a/doc/guides/rel_notes/release_20_05.rst b/doc/guides/rel_notes/release_20_05.rst index c960fd2..1459218 100644 --- a/doc/guides/rel_notes/release_20_05.rst +++ b/doc/guides/rel_notes/release_20_05.rst @@ -62,6 +62,7 @@ New Features * Added support for matching on IPv4 Time To Live and IPv6 Hop Limit. * Added support for creating Relaxed Ordering Memory Regions. + * Added support for 9000 MTU in Multi-Packet RQ mode. Removed Items ------------- diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index 6a11b14..a2ba6d3 100644 --- a/drivers/net/mlx5/mlx5.c +++ b/drivers/net/mlx5/mlx5.c @@ -63,6 +63,9 @@ /* Device parameter to configure log 2 of the number of strides for MPRQ. */ #define MLX5_RX_MPRQ_LOG_STRIDE_NUM "mprq_log_stride_num" +/* Device parameter to configure log 2 of the stride size for MPRQ. */ +#define MLX5_RX_MPRQ_LOG_STRIDE_SIZE "mprq_log_stride_size" + /* Device parameter to limit the size of memcpy'd packet for MPRQ. */ #define MLX5_RX_MPRQ_MAX_MEMCPY_LEN "mprq_max_memcpy_len" @@ -1531,6 +1534,8 @@ struct mlx5_flow_id_pool * config->mprq.enabled = !!tmp; } else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_NUM, key) == 0) { config->mprq.stride_num_n = tmp; + } else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_SIZE, key) == 0) { + config->mprq.stride_size_n = tmp; } else if (strcmp(MLX5_RX_MPRQ_MAX_MEMCPY_LEN, key) == 0) { config->mprq.max_memcpy_len = tmp; } else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) { @@ -1627,6 +1632,7 @@ struct mlx5_flow_id_pool * MLX5_RXQ_PKT_PAD_EN, MLX5_RX_MPRQ_EN, MLX5_RX_MPRQ_LOG_STRIDE_NUM, + MLX5_RX_MPRQ_LOG_STRIDE_SIZE, MLX5_RX_MPRQ_MAX_MEMCPY_LEN, MLX5_RXQS_MIN_MPRQ, MLX5_TXQ_INLINE, @@ -2302,8 +2308,6 @@ struct mlx5_flow_id_pool * mprq_caps.min_single_wqe_log_num_of_strides; mprq_max_stride_num_n = mprq_caps.max_single_wqe_log_num_of_strides; - config.mprq.stride_num_n = RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N, - mprq_min_stride_num_n); } #endif if (RTE_CACHE_LINE_SIZE == 128 && @@ -2617,17 +2621,32 @@ struct mlx5_flow_id_pool * #endif } if (config.mprq.enabled && mprq) { - if (config.mprq.stride_num_n > mprq_max_stride_num_n || - config.mprq.stride_num_n < mprq_min_stride_num_n) { + if (config.mprq.stride_num_n && + (config.mprq.stride_num_n > mprq_max_stride_num_n || + config.mprq.stride_num_n < mprq_min_stride_num_n)) { config.mprq.stride_num_n = - RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N, - mprq_min_stride_num_n); + RTE_MIN(RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N, + mprq_min_stride_num_n), + mprq_max_stride_num_n); DRV_LOG(WARNING, "the number of strides" " for Multi-Packet RQ is out of range," " setting default value (%u)", 1 << config.mprq.stride_num_n); } + if (config.mprq.stride_size_n && + (config.mprq.stride_size_n > mprq_max_stride_size_n || + config.mprq.stride_size_n < mprq_min_stride_size_n)) { + config.mprq.stride_size_n = + RTE_MIN(RTE_MAX(MLX5_MPRQ_STRIDE_SIZE_N, + mprq_min_stride_size_n), + mprq_max_stride_size_n); + DRV_LOG(WARNING, + "the size of a stride" + " for Multi-Packet RQ is out of range," + " setting default value (%u)", + 1 << config.mprq.stride_size_n); + } config.mprq.min_stride_size_n = mprq_min_stride_size_n; config.mprq.max_stride_size_n = mprq_max_stride_size_n; } else if (config.mprq.enabled && !mprq) { @@ -3361,7 +3380,8 @@ struct mlx5_flow_id_pool * .mr_ext_memseg_en = 1, .mprq = { .enabled = 0, /* Disabled by default. */ - .stride_num_n = MLX5_MPRQ_STRIDE_NUM_N, + .stride_num_n = 0, + .stride_size_n = 0, .max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN, .min_rxqs_num = MLX5_MPRQ_MIN_RXQS, }, diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index 34ab475..65bc0dc 100644 --- a/drivers/net/mlx5/mlx5.h +++ b/drivers/net/mlx5/mlx5.h @@ -179,6 +179,7 @@ struct mlx5_dev_config { struct { unsigned int enabled:1; /* Whether MPRQ is enabled. */ unsigned int stride_num_n; /* Number of strides. */ + unsigned int stride_size_n; /* Size of a stride. */ unsigned int min_stride_size_n; /* Min size of a stride. */ unsigned int max_stride_size_n; /* Max size of a stride. */ unsigned int max_memcpy_len; diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h index 19e8253..260f584 100644 --- a/drivers/net/mlx5/mlx5_defs.h +++ b/drivers/net/mlx5/mlx5_defs.h @@ -143,6 +143,9 @@ /* Log 2 of the default number of strides per WQE for Multi-Packet RQ. */ #define MLX5_MPRQ_STRIDE_NUM_N 6U +/* Log 2 of the default size of a stride per WQE for Multi-Packet RQ. */ +#define MLX5_MPRQ_STRIDE_SIZE_N 11U + /* Two-byte shift is disabled for Multi-Packet RQ. */ #define MLX5_MPRQ_TWO_BYTE_SHIFT 0 diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c index 0a95e3c..8f8c16b 100644 --- a/drivers/net/mlx5/mlx5_rxq.c +++ b/drivers/net/mlx5/mlx5_rxq.c @@ -1793,6 +1793,7 @@ struct mlx5_rxq_ctrl * struct mlx5_priv *priv = dev->data->dev_private; struct mlx5_rxq_ctrl *tmpl; unsigned int mb_len = rte_pktmbuf_data_room_size(mp); + unsigned int mprq_stride_nums; unsigned int mprq_stride_size; struct mlx5_dev_config *config = &priv->config; unsigned int strd_headroom_en; @@ -1856,25 +1857,27 @@ struct mlx5_rxq_ctrl * strd_headroom_en = 1; mprq_stride_size = non_scatter_min_mbuf_size; } + mprq_stride_nums = config->mprq.stride_num_n ? + config->mprq.stride_num_n : MLX5_MPRQ_STRIDE_NUM_N; + mprq_stride_size = (mprq_stride_size <= + (1U << config->mprq.max_stride_size_n)) ? + log2above(mprq_stride_size) : MLX5_MPRQ_STRIDE_SIZE_N; /* * This Rx queue can be configured as a Multi-Packet RQ if all of the * following conditions are met: * - MPRQ is enabled. * - The number of descs is more than the number of strides. - * - max_rx_pkt_len plus overhead is less than the max size of a - * stride. * Otherwise, enable Rx scatter if necessary. */ - if (mprq_en && - desc > (1U << config->mprq.stride_num_n) && - mprq_stride_size <= (1U << config->mprq.max_stride_size_n)) { + if (mprq_en && desc > (1U << mprq_stride_nums)) { /* TODO: Rx scatter isn't supported yet. */ tmpl->rxq.sges_n = 0; /* Trim the number of descs needed. */ - desc >>= config->mprq.stride_num_n; - tmpl->rxq.strd_num_n = config->mprq.stride_num_n; - tmpl->rxq.strd_sz_n = RTE_MAX(log2above(mprq_stride_size), - config->mprq.min_stride_size_n); + desc >>= mprq_stride_nums; + tmpl->rxq.strd_num_n = config->mprq.stride_num_n ? + config->mprq.stride_num_n : mprq_stride_nums; + tmpl->rxq.strd_sz_n = config->mprq.stride_size_n ? + config->mprq.stride_size_n : mprq_stride_size; tmpl->rxq.strd_shift_en = MLX5_MPRQ_TWO_BYTE_SHIFT; tmpl->rxq.strd_headroom_en = strd_headroom_en; tmpl->rxq.mprq_max_memcpy_len = RTE_MIN(first_mb_free_size, @@ -1924,9 +1927,12 @@ struct mlx5_rxq_ctrl * DRV_LOG(WARNING, "port %u MPRQ is requested but cannot be enabled" " (requested: desc = %u, stride_sz = %u," - " supported: min_stride_num = %u, max_stride_sz = %u).", - dev->data->port_id, desc, mprq_stride_size, + " supported: min_stride_num = %u, min_stride_sz = %u," + "max_stride_sz = %u).", + dev->data->port_id, desc, + (1 << config->mprq.stride_size_n), (1 << config->mprq.stride_num_n), + (1 << config->mprq.min_stride_size_n), (1 << config->mprq.max_stride_size_n)); DRV_LOG(DEBUG, "port %u maximum number of segments per packet: %u", dev->data->port_id, 1 << tmpl->rxq.sges_n); -- 1.8.3.1