From: <psatheesh@marvell.com>
To: Jerin Jacob <jerinj@marvell.com>,
Nithin Dabilpuram <ndabilpuram@marvell.com>,
Kiran Kumar K <kirankumark@marvell.com>,
"John McNamara" <john.mcnamara@intel.com>,
Marko Kovacevic <marko.kovacevic@intel.com>,
Vamsi Attunuru <vattunuru@marvell.com>
Cc: <dev@dpdk.org>, Satheesh Paul A <psatheesh@marvell.com>
Subject: [dpdk-dev] [PATCH v2] net/octeontx2: support for custom L2 header
Date: Mon, 6 Apr 2020 12:13:03 +0530 [thread overview]
Message-ID: <1586155384-1543-1-git-send-email-psatheesh@marvell.com> (raw)
From: Satheesh Paul A <psatheesh@marvell.com>
This patch adds SDP packet parsing support with custom L2 header,
adds support to include a field from custom header for flow tag
generation.
Signed-off-by: Satheesh Paul A <psatheesh@marvell.com>
---
v2: No change. Resending after subscribing to dev@dpdk.org mailing list
doc/guides/nics/octeontx2.rst | 2 +-
drivers/common/octeontx2/hw/otx2_npc.h | 2 ++
drivers/common/octeontx2/otx2_mbox.h | 4 +++-
drivers/net/octeontx2/otx2_ethdev.c | 6 ++++++
drivers/net/octeontx2/otx2_ethdev_devargs.c | 4 +++-
| 5 +++++
6 files changed, 20 insertions(+), 3 deletions(-)
diff --git a/doc/guides/nics/octeontx2.rst b/doc/guides/nics/octeontx2.rst
index 60187ec..b615585 100644
--- a/doc/guides/nics/octeontx2.rst
+++ b/doc/guides/nics/octeontx2.rst
@@ -177,7 +177,7 @@ Runtime Config Options
With the above configuration, higig2 will be enabled on that port and the
traffic on this port should be higig2 traffic only. Supported switch header
- types are "higig2" and "dsa".
+ types are "higig2", "dsa" and "chlen90b".
- ``RSS tag as XOR`` (default ``0``)
diff --git a/drivers/common/octeontx2/hw/otx2_npc.h b/drivers/common/octeontx2/hw/otx2_npc.h
index 3dfc137..8083c78 100644
--- a/drivers/common/octeontx2/hw/otx2_npc.h
+++ b/drivers/common/octeontx2/hw/otx2_npc.h
@@ -31,6 +31,7 @@
(0x80008ull | (uint64_t)(a) << 6)
#define NPC_AF_PKINDX_CPI_DEFX(a, b) \
(0x80020ull | (uint64_t)(a) << 6 | (uint64_t)(b) << 3)
+#define NPC_AF_CHLEN90B_PKIND (0x3bull)
#define NPC_AF_KPUX_ENTRYX_CAMX(a, b, c) \
(0x100000ull | (uint64_t)(a) << 14 | (uint64_t)(b) << 6 | \
(uint64_t)(c) << 3)
@@ -184,6 +185,7 @@ enum npc_kpu_la_ltype {
NPC_LT_LA_IH_2_ETHER,
NPC_LT_LA_HIGIG2_ETHER,
NPC_LT_LA_IH_NIX_HIGIG2_ETHER,
+ NPC_LT_LA_CH_LEN_90B_ETHER, /* Custom L2 header of length 90 bytes */
};
enum npc_kpu_lb_ltype {
diff --git a/drivers/common/octeontx2/otx2_mbox.h b/drivers/common/octeontx2/otx2_mbox.h
index d192d89..59a2f5e 100644
--- a/drivers/common/octeontx2/otx2_mbox.h
+++ b/drivers/common/octeontx2/otx2_mbox.h
@@ -90,7 +90,7 @@ struct mbox_msghdr {
#define OTX2_MBOX_RSP_SIG (0xbeef)
/* Signature, for validating corrupted msgs */
uint16_t __otx2_io sig;
-#define OTX2_MBOX_VERSION (0x0004)
+#define OTX2_MBOX_VERSION (0x0006)
/* Version of msg's structure for this ID */
uint16_t __otx2_io ver;
/* Offset of next msg within mailbox region */
@@ -341,6 +341,7 @@ struct npc_set_pkind {
#define OTX2_PRIV_FLAGS_DEFAULT BIT_ULL(0)
#define OTX2_PRIV_FLAGS_EDSA BIT_ULL(1)
#define OTX2_PRIV_FLAGS_HIGIG BIT_ULL(2)
+#define OTX2_PRIV_FLAGS_LEN_90B BIT_ULL(3)
#define OTX2_PRIV_FLAGS_CUSTOM BIT_ULL(63)
uint64_t __otx2_io mode;
#define PKIND_TX BIT_ULL(0)
@@ -923,6 +924,7 @@ struct nix_rss_flowkey_cfg {
#define FLOW_KEY_TYPE_INNR_UDP BIT(15)
#define FLOW_KEY_TYPE_INNR_SCTP BIT(16)
#define FLOW_KEY_TYPE_INNR_ETH_DMAC BIT(17)
+#define FLOW_KEY_TYPE_CH_LEN_90B BIT(18)
#define FLOW_KEY_TYPE_L4_DST BIT(28)
#define FLOW_KEY_TYPE_L4_SRC BIT(29)
#define FLOW_KEY_TYPE_L3_DST BIT(30)
diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
index e60f490..2f2f1b6 100644
--- a/drivers/net/octeontx2/otx2_ethdev.c
+++ b/drivers/net/octeontx2/otx2_ethdev.c
@@ -106,6 +106,12 @@
if (dev->npc_flow.switch_header_type == 0)
return 0;
+ if (dev->npc_flow.switch_header_type == OTX2_PRIV_FLAGS_LEN_90B &&
+ !otx2_dev_is_sdp(dev)) {
+ otx2_err("chlen90b is not supported on non-SDP device");
+ return -EINVAL;
+ }
+
/* Notify AF about higig2 config */
req = otx2_mbox_alloc_msg_npc_set_pkind(mbox);
req->mode = dev->npc_flow.switch_header_type;
diff --git a/drivers/net/octeontx2/otx2_ethdev_devargs.c b/drivers/net/octeontx2/otx2_ethdev_devargs.c
index f29f015..83868bc 100644
--- a/drivers/net/octeontx2/otx2_ethdev_devargs.c
+++ b/drivers/net/octeontx2/otx2_ethdev_devargs.c
@@ -113,6 +113,8 @@
if (strcmp(value, "dsa") == 0)
*(uint16_t *)extra_args = OTX2_PRIV_FLAGS_EDSA;
+ if (strcmp(value, "chlen90b") == 0)
+ *(uint16_t *)extra_args = OTX2_PRIV_FLAGS_LEN_90B;
return 0;
}
@@ -185,5 +187,5 @@
OTX2_MAX_SQB_COUNT "=<8-512>"
OTX2_FLOW_PREALLOC_SIZE "=<1-32>"
OTX2_FLOW_MAX_PRIORITY "=<1-32>"
- OTX2_SWITCH_HEADER_TYPE "=<higig2|dsa>"
+ OTX2_SWITCH_HEADER_TYPE "=<higig2|dsa|chlen90b>"
OTX2_RSS_TAG_AS_XOR "=1");
--git a/drivers/net/octeontx2/otx2_rss.c b/drivers/net/octeontx2/otx2_rss.c
index 7a8c8f3..a29441e 100644
--- a/drivers/net/octeontx2/otx2_rss.c
+++ b/drivers/net/octeontx2/otx2_rss.c
@@ -210,6 +210,11 @@
dev->rss_info.nix_rss = ethdev_rss;
+ if (ethdev_rss & ETH_RSS_L2_PAYLOAD &&
+ dev->npc_flow.switch_header_type == OTX2_PRIV_FLAGS_LEN_90B) {
+ flowkey_cfg |= FLOW_KEY_TYPE_CH_LEN_90B;
+ }
+
if (ethdev_rss & ETH_RSS_L3_SRC_ONLY)
flowkey_cfg |= FLOW_KEY_TYPE_L3_SRC;
--
1.8.3.1
next reply other threads:[~2020-04-06 6:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-06 6:43 psatheesh [this message]
2020-04-06 9:25 ` Jerin Jacob
2020-04-22 14:14 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1586155384-1543-1-git-send-email-psatheesh@marvell.com \
--to=psatheesh@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=john.mcnamara@intel.com \
--cc=kirankumark@marvell.com \
--cc=marko.kovacevic@intel.com \
--cc=ndabilpuram@marvell.com \
--cc=vattunuru@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).