From: Nicolas Chautru <nicolas.chautru@intel.com>
To: dev@dpdk.org, akhil.goyal@nxp.com
Cc: bruce.richardson@intel.com, Nicolas Chautru <nicolas.chautru@intel.com>
Subject: [dpdk-dev] [PATCH v5 04/11] baseband/fpga_5gnr_fec: add queue configuration
Date: Sat, 18 Apr 2020 15:46:41 -0700 [thread overview]
Message-ID: <1587250008-69892-5-git-send-email-nicolas.chautru@intel.com> (raw)
In-Reply-To: <1587250008-69892-1-git-send-email-nicolas.chautru@intel.com>
Adding function to create and configure queues for
the device. Still no capability.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h | 110 +++++++
drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 365 ++++++++++++++++++++-
2 files changed, 474 insertions(+), 1 deletion(-)
diff --git a/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h b/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
index 167d440..acfa3ad 100644
--- a/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
+++ b/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
@@ -223,10 +223,120 @@ struct __attribute__((__packed__)) fpga_ring_ctrl_reg {
struct fpga_5gnr_fec_device {
/** Base address of MMIO registers (BAR0) */
void *mmio_base;
+ /** Base address of memory for sw rings */
+ void *sw_rings;
+ /** Physical address of sw_rings */
+ rte_iova_t sw_rings_phys;
+ /** Number of bytes available for each queue in device. */
+ uint32_t sw_ring_size;
+ /** Max number of entries available for each queue in device */
+ uint32_t sw_ring_max_depth;
+ /** Base address of response tail pointer buffer */
+ uint32_t *tail_ptrs;
+ /** Physical address of tail pointers */
+ rte_iova_t tail_ptr_phys;
+ /** Queues flush completion flag */
+ uint64_t *flush_queue_status;
+ /* Bitmap capturing which Queues are bound to the PF/VF */
+ uint64_t q_bound_bit_map;
+ /* Bitmap capturing which Queues have already been assigned */
+ uint64_t q_assigned_bit_map;
/** True if this is a PF FPGA FEC device */
bool pf_device;
};
+/* Structure associated with each queue. */
+struct __rte_cache_aligned fpga_queue {
+ struct fpga_ring_ctrl_reg ring_ctrl_reg; /* Ring Control Register */
+ union fpga_dma_desc *ring_addr; /* Virtual address of software ring */
+ uint64_t *ring_head_addr; /* Virtual address of completion_head */
+ uint64_t shadow_completion_head; /* Shadow completion head value */
+ uint16_t head_free_desc; /* Ring head */
+ uint16_t tail; /* Ring tail */
+ /* Mask used to wrap enqueued descriptors on the sw ring */
+ uint32_t sw_ring_wrap_mask;
+ uint32_t irq_enable; /* Enable ops dequeue interrupts if set to 1 */
+ uint8_t q_idx; /* Queue index */
+ struct fpga_5gnr_fec_device *d;
+ /* MMIO register of shadow_tail used to enqueue descriptors */
+ void *shadow_tail_addr;
+};
+
+/* Write to 16 bit MMIO register address */
+static inline void
+mmio_write_16(void *addr, uint16_t value)
+{
+ *((volatile uint16_t *)(addr)) = rte_cpu_to_le_16(value);
+}
+
+/* Write to 32 bit MMIO register address */
+static inline void
+mmio_write_32(void *addr, uint32_t value)
+{
+ *((volatile uint32_t *)(addr)) = rte_cpu_to_le_32(value);
+}
+
+/* Write to 64 bit MMIO register address */
+static inline void
+mmio_write_64(void *addr, uint64_t value)
+{
+ *((volatile uint64_t *)(addr)) = rte_cpu_to_le_64(value);
+}
+
+/* Write a 8 bit register of a FPGA 5GNR FEC device */
+static inline void
+fpga_reg_write_8(void *mmio_base, uint32_t offset, uint8_t payload)
+{
+ void *reg_addr = RTE_PTR_ADD(mmio_base, offset);
+ *((volatile uint8_t *)(reg_addr)) = payload;
+}
+
+/* Write a 16 bit register of a FPGA 5GNR FEC device */
+static inline void
+fpga_reg_write_16(void *mmio_base, uint32_t offset, uint16_t payload)
+{
+ void *reg_addr = RTE_PTR_ADD(mmio_base, offset);
+ mmio_write_16(reg_addr, payload);
+}
+
+/* Write a 32 bit register of a FPGA 5GNR FEC device */
+static inline void
+fpga_reg_write_32(void *mmio_base, uint32_t offset, uint32_t payload)
+{
+ void *reg_addr = RTE_PTR_ADD(mmio_base, offset);
+ mmio_write_32(reg_addr, payload);
+}
+
+/* Write a 64 bit register of a FPGA 5GNR FEC device */
+static inline void
+fpga_reg_write_64(void *mmio_base, uint32_t offset, uint64_t payload)
+{
+ void *reg_addr = RTE_PTR_ADD(mmio_base, offset);
+ mmio_write_64(reg_addr, payload);
+}
+
+/* Write a ring control register of a FPGA 5GNR FEC device */
+static inline void
+fpga_ring_reg_write(void *mmio_base, uint32_t offset,
+ struct fpga_ring_ctrl_reg payload)
+{
+ fpga_reg_write_64(mmio_base, offset, payload.ring_base_addr);
+ fpga_reg_write_64(mmio_base, offset + FPGA_5GNR_FEC_RING_HEAD_ADDR,
+ payload.ring_head_addr);
+ fpga_reg_write_16(mmio_base, offset + FPGA_5GNR_FEC_RING_SIZE,
+ payload.ring_size);
+ fpga_reg_write_16(mmio_base, offset + FPGA_5GNR_FEC_RING_HEAD_POINT,
+ payload.head_point);
+ fpga_reg_write_8(mmio_base, offset + FPGA_5GNR_FEC_RING_FLUSH_QUEUE_EN,
+ payload.flush_queue_en);
+ fpga_reg_write_16(mmio_base, offset + FPGA_5GNR_FEC_RING_SHADOW_TAIL,
+ payload.shadow_tail);
+ fpga_reg_write_8(mmio_base, offset + FPGA_5GNR_FEC_RING_MISC,
+ payload.misc);
+ fpga_reg_write_8(mmio_base, offset + FPGA_5GNR_FEC_RING_ENABLE,
+ payload.enable);
+}
+
/* Read a register of FPGA 5GNR FEC device */
static inline uint32_t
fpga_reg_read_32(void *mmio_base, uint32_t offset)
diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
index b3f2d0e..ec74860 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
@@ -23,8 +23,113 @@
static int fpga_5gnr_fec_logtype;
static int
-fpga_dev_close(struct rte_bbdev *dev __rte_unused)
+fpga_setup_queues(struct rte_bbdev *dev, uint16_t num_queues, int socket_id)
{
+ /* Number of queues bound to a PF/VF */
+ uint32_t hw_q_num = 0;
+ uint32_t ring_size, payload, address, q_id, offset;
+ rte_iova_t phys_addr;
+ struct fpga_ring_ctrl_reg ring_reg;
+ struct fpga_5gnr_fec_device *fpga_dev = dev->data->dev_private;
+
+ address = FPGA_5GNR_FEC_QUEUE_PF_VF_MAP_DONE;
+ if (!(fpga_reg_read_32(fpga_dev->mmio_base, address) & 0x1)) {
+ rte_bbdev_log(ERR,
+ "Queue-PF/VF mapping is not set! Was PF configured for device (%s) ?",
+ dev->data->name);
+ return -EPERM;
+ }
+
+ /* Clear queue registers structure */
+ memset(&ring_reg, 0, sizeof(struct fpga_ring_ctrl_reg));
+
+ /* Scan queue map.
+ * If a queue is valid and mapped to a calling PF/VF the read value is
+ * replaced with a queue ID and if it's not then
+ * FPGA_INVALID_HW_QUEUE_ID is returned.
+ */
+ for (q_id = 0; q_id < FPGA_TOTAL_NUM_QUEUES; ++q_id) {
+ uint32_t hw_q_id = fpga_reg_read_32(fpga_dev->mmio_base,
+ FPGA_5GNR_FEC_QUEUE_MAP + (q_id << 2));
+
+ rte_bbdev_log_debug("%s: queue ID: %u, registry queue ID: %u",
+ dev->device->name, q_id, hw_q_id);
+
+ if (hw_q_id != FPGA_INVALID_HW_QUEUE_ID) {
+ fpga_dev->q_bound_bit_map |= (1ULL << q_id);
+ /* Clear queue register of found queue */
+ offset = FPGA_5GNR_FEC_RING_CTRL_REGS +
+ (sizeof(struct fpga_ring_ctrl_reg) * q_id);
+ fpga_ring_reg_write(fpga_dev->mmio_base,
+ offset, ring_reg);
+ ++hw_q_num;
+ }
+ }
+ if (hw_q_num == 0) {
+ rte_bbdev_log(ERR,
+ "No HW queues assigned to this device. Probably this is a VF configured for PF mode. Check device configuration!");
+ return -ENODEV;
+ }
+
+ if (num_queues > hw_q_num) {
+ rte_bbdev_log(ERR,
+ "Not enough queues for device %s! Requested: %u, available: %u",
+ dev->device->name, num_queues, hw_q_num);
+ return -EINVAL;
+ }
+
+ ring_size = FPGA_RING_MAX_SIZE * sizeof(struct fpga_dma_dec_desc);
+
+ /* Enforce 32 byte alignment */
+ RTE_BUILD_BUG_ON((RTE_CACHE_LINE_SIZE % 32) != 0);
+
+ /* Allocate memory for SW descriptor rings */
+ fpga_dev->sw_rings = rte_zmalloc_socket(dev->device->driver->name,
+ num_queues * ring_size, RTE_CACHE_LINE_SIZE,
+ socket_id);
+ if (fpga_dev->sw_rings == NULL) {
+ rte_bbdev_log(ERR,
+ "Failed to allocate memory for %s:%u sw_rings",
+ dev->device->driver->name, dev->data->dev_id);
+ return -ENOMEM;
+ }
+
+ fpga_dev->sw_rings_phys = rte_malloc_virt2iova(fpga_dev->sw_rings);
+ fpga_dev->sw_ring_size = ring_size;
+ fpga_dev->sw_ring_max_depth = FPGA_RING_MAX_SIZE;
+
+ /* Allocate memory for ring flush status */
+ fpga_dev->flush_queue_status = rte_zmalloc_socket(NULL,
+ sizeof(uint64_t), RTE_CACHE_LINE_SIZE, socket_id);
+ if (fpga_dev->flush_queue_status == NULL) {
+ rte_bbdev_log(ERR,
+ "Failed to allocate memory for %s:%u flush_queue_status",
+ dev->device->driver->name, dev->data->dev_id);
+ return -ENOMEM;
+ }
+
+ /* Set the flush status address registers */
+ phys_addr = rte_malloc_virt2iova(fpga_dev->flush_queue_status);
+
+ address = FPGA_5GNR_FEC_VFQ_FLUSH_STATUS_LW;
+ payload = (uint32_t)(phys_addr);
+ fpga_reg_write_32(fpga_dev->mmio_base, address, payload);
+
+ address = FPGA_5GNR_FEC_VFQ_FLUSH_STATUS_HI;
+ payload = (uint32_t)(phys_addr >> 32);
+ fpga_reg_write_32(fpga_dev->mmio_base, address, payload);
+
+ return 0;
+}
+
+static int
+fpga_dev_close(struct rte_bbdev *dev)
+{
+ struct fpga_5gnr_fec_device *fpga_dev = dev->data->dev_private;
+
+ rte_free(fpga_dev->sw_rings);
+ rte_free(fpga_dev->flush_queue_status);
+
return 0;
}
@@ -80,9 +185,267 @@
}
}
+/**
+ * Find index of queue bound to current PF/VF which is unassigned. Return -1
+ * when there is no available queue
+ */
+static inline int
+fpga_find_free_queue_idx(struct rte_bbdev *dev,
+ const struct rte_bbdev_queue_conf *conf)
+{
+ struct fpga_5gnr_fec_device *d = dev->data->dev_private;
+ uint64_t q_idx;
+ uint8_t i = 0;
+ uint8_t range = FPGA_TOTAL_NUM_QUEUES >> 1;
+
+ if (conf->op_type == RTE_BBDEV_OP_LDPC_ENC) {
+ i = FPGA_NUM_DL_QUEUES;
+ range = FPGA_TOTAL_NUM_QUEUES;
+ }
+
+ for (; i < range; ++i) {
+ q_idx = 1ULL << i;
+ /* Check if index of queue is bound to current PF/VF */
+ if (d->q_bound_bit_map & q_idx)
+ /* Check if found queue was not already assigned */
+ if (!(d->q_assigned_bit_map & q_idx)) {
+ d->q_assigned_bit_map |= q_idx;
+ return i;
+ }
+ }
+
+ rte_bbdev_log(INFO, "Failed to find free queue on %s", dev->data->name);
+
+ return -1;
+}
+
+static int
+fpga_queue_setup(struct rte_bbdev *dev, uint16_t queue_id,
+ const struct rte_bbdev_queue_conf *conf)
+{
+ uint32_t address, ring_offset;
+ struct fpga_5gnr_fec_device *d = dev->data->dev_private;
+ struct fpga_queue *q;
+ int8_t q_idx;
+
+ /* Check if there is a free queue to assign */
+ q_idx = fpga_find_free_queue_idx(dev, conf);
+ if (q_idx == -1)
+ return -1;
+
+ /* Allocate the queue data structure. */
+ q = rte_zmalloc_socket(dev->device->driver->name, sizeof(*q),
+ RTE_CACHE_LINE_SIZE, conf->socket);
+ if (q == NULL) {
+ /* Mark queue as un-assigned */
+ d->q_assigned_bit_map &= (0xFFFFFFFF - (1ULL << q_idx));
+ rte_bbdev_log(ERR, "Failed to allocate queue memory");
+ return -ENOMEM;
+ }
+
+ q->d = d;
+ q->q_idx = q_idx;
+
+ /* Set ring_base_addr */
+ q->ring_addr = RTE_PTR_ADD(d->sw_rings, (d->sw_ring_size * queue_id));
+ q->ring_ctrl_reg.ring_base_addr = d->sw_rings_phys +
+ (d->sw_ring_size * queue_id);
+
+ /* Allocate memory for Completion Head variable*/
+ q->ring_head_addr = rte_zmalloc_socket(dev->device->driver->name,
+ sizeof(uint64_t), RTE_CACHE_LINE_SIZE, conf->socket);
+ if (q->ring_head_addr == NULL) {
+ /* Mark queue as un-assigned */
+ d->q_assigned_bit_map &= (0xFFFFFFFF - (1ULL << q_idx));
+ rte_free(q);
+ rte_bbdev_log(ERR,
+ "Failed to allocate memory for %s:%u completion_head",
+ dev->device->driver->name, dev->data->dev_id);
+ return -ENOMEM;
+ }
+ /* Set ring_head_addr */
+ q->ring_ctrl_reg.ring_head_addr =
+ rte_malloc_virt2iova(q->ring_head_addr);
+
+ /* Clear shadow_completion_head */
+ q->shadow_completion_head = 0;
+
+ /* Set ring_size */
+ if (conf->queue_size > FPGA_RING_MAX_SIZE) {
+ /* Mark queue as un-assigned */
+ d->q_assigned_bit_map &= (0xFFFFFFFF - (1ULL << q_idx));
+ rte_free(q->ring_head_addr);
+ rte_free(q);
+ rte_bbdev_log(ERR,
+ "Size of queue is too big %d (MAX: %d ) for %s:%u",
+ conf->queue_size, FPGA_RING_MAX_SIZE,
+ dev->device->driver->name, dev->data->dev_id);
+ return -EINVAL;
+ }
+ q->ring_ctrl_reg.ring_size = conf->queue_size;
+
+ /* Set Miscellaneous FPGA register*/
+ /* Max iteration number for TTI mitigation - todo */
+ q->ring_ctrl_reg.max_ul_dec = 0;
+ /* Enable max iteration number for TTI - todo */
+ q->ring_ctrl_reg.max_ul_dec_en = 0;
+
+ /* Enable the ring */
+ q->ring_ctrl_reg.enable = 1;
+
+ /* Set FPGA head_point and tail registers */
+ q->ring_ctrl_reg.head_point = q->tail = 0;
+
+ /* Set FPGA shadow_tail register */
+ q->ring_ctrl_reg.shadow_tail = q->tail;
+
+ /* Calculates the ring offset for found queue */
+ ring_offset = FPGA_5GNR_FEC_RING_CTRL_REGS +
+ (sizeof(struct fpga_ring_ctrl_reg) * q_idx);
+
+ /* Set FPGA Ring Control Registers */
+ fpga_ring_reg_write(d->mmio_base, ring_offset, q->ring_ctrl_reg);
+
+ /* Store MMIO register of shadow_tail */
+ address = ring_offset + FPGA_5GNR_FEC_RING_SHADOW_TAIL;
+ q->shadow_tail_addr = RTE_PTR_ADD(d->mmio_base, address);
+
+ q->head_free_desc = q->tail;
+
+ /* Set wrap mask */
+ q->sw_ring_wrap_mask = conf->queue_size - 1;
+
+ rte_bbdev_log_debug("Setup dev%u q%u: queue_idx=%u",
+ dev->data->dev_id, queue_id, q->q_idx);
+
+ dev->data->queues[queue_id].queue_private = q;
+
+ rte_bbdev_log_debug("BBDEV queue[%d] set up for FPGA queue[%d]",
+ queue_id, q_idx);
+
+ return 0;
+}
+
+static int
+fpga_queue_release(struct rte_bbdev *dev, uint16_t queue_id)
+{
+ struct fpga_5gnr_fec_device *d = dev->data->dev_private;
+ struct fpga_queue *q = dev->data->queues[queue_id].queue_private;
+ struct fpga_ring_ctrl_reg ring_reg;
+ uint32_t offset;
+
+ rte_bbdev_log_debug("FPGA Queue[%d] released", queue_id);
+
+ if (q != NULL) {
+ memset(&ring_reg, 0, sizeof(struct fpga_ring_ctrl_reg));
+ offset = FPGA_5GNR_FEC_RING_CTRL_REGS +
+ (sizeof(struct fpga_ring_ctrl_reg) * q->q_idx);
+ /* Disable queue */
+ fpga_reg_write_8(d->mmio_base,
+ offset + FPGA_5GNR_FEC_RING_ENABLE, 0x00);
+ /* Clear queue registers */
+ fpga_ring_reg_write(d->mmio_base, offset, ring_reg);
+
+ /* Mark the Queue as un-assigned */
+ d->q_assigned_bit_map &= (0xFFFFFFFF - (1ULL << q->q_idx));
+ rte_free(q->ring_head_addr);
+ rte_free(q);
+ dev->data->queues[queue_id].queue_private = NULL;
+ }
+
+ return 0;
+}
+
+/* Function starts a device queue. */
+static int
+fpga_queue_start(struct rte_bbdev *dev, uint16_t queue_id)
+{
+ struct fpga_5gnr_fec_device *d = dev->data->dev_private;
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+ if (d == NULL) {
+ rte_bbdev_log(ERR, "Invalid device pointer");
+ return -1;
+ }
+#endif
+ struct fpga_queue *q = dev->data->queues[queue_id].queue_private;
+ uint32_t offset = FPGA_5GNR_FEC_RING_CTRL_REGS +
+ (sizeof(struct fpga_ring_ctrl_reg) * q->q_idx);
+ uint8_t enable = 0x01;
+ uint16_t zero = 0x0000;
+
+ /* Clear queue head and tail variables */
+ q->tail = q->head_free_desc = 0;
+
+ /* Clear FPGA head_point and tail registers */
+ fpga_reg_write_16(d->mmio_base, offset + FPGA_5GNR_FEC_RING_HEAD_POINT,
+ zero);
+ fpga_reg_write_16(d->mmio_base, offset + FPGA_5GNR_FEC_RING_SHADOW_TAIL,
+ zero);
+
+ /* Enable queue */
+ fpga_reg_write_8(d->mmio_base, offset + FPGA_5GNR_FEC_RING_ENABLE,
+ enable);
+
+ rte_bbdev_log_debug("FPGA Queue[%d] started", queue_id);
+ return 0;
+}
+
+/* Function stops a device queue. */
+static int
+fpga_queue_stop(struct rte_bbdev *dev, uint16_t queue_id)
+{
+ struct fpga_5gnr_fec_device *d = dev->data->dev_private;
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+ if (d == NULL) {
+ rte_bbdev_log(ERR, "Invalid device pointer");
+ return -1;
+ }
+#endif
+ struct fpga_queue *q = dev->data->queues[queue_id].queue_private;
+ uint32_t offset = FPGA_5GNR_FEC_RING_CTRL_REGS +
+ (sizeof(struct fpga_ring_ctrl_reg) * q->q_idx);
+ uint8_t payload = 0x01;
+ uint8_t counter = 0;
+ uint8_t timeout = FPGA_QUEUE_FLUSH_TIMEOUT_US /
+ FPGA_TIMEOUT_CHECK_INTERVAL;
+
+ /* Set flush_queue_en bit to trigger queue flushing */
+ fpga_reg_write_8(d->mmio_base,
+ offset + FPGA_5GNR_FEC_RING_FLUSH_QUEUE_EN, payload);
+
+ /** Check if queue flush is completed.
+ * FPGA will update the completion flag after queue flushing is
+ * completed. If completion flag is not updated within 1ms it is
+ * considered as a failure.
+ */
+ while (!(*((volatile uint8_t *)d->flush_queue_status + q->q_idx)
+ & payload)) {
+ if (counter > timeout) {
+ rte_bbdev_log(ERR, "FPGA Queue Flush failed for queue %d",
+ queue_id);
+ return -1;
+ }
+ usleep(FPGA_TIMEOUT_CHECK_INTERVAL);
+ counter++;
+ }
+
+ /* Disable queue */
+ payload = 0x00;
+ fpga_reg_write_8(d->mmio_base, offset + FPGA_5GNR_FEC_RING_ENABLE,
+ payload);
+
+ rte_bbdev_log_debug("FPGA Queue[%d] stopped", queue_id);
+ return 0;
+}
+
static const struct rte_bbdev_ops fpga_ops = {
+ .setup_queues = fpga_setup_queues,
.close = fpga_dev_close,
.info_get = fpga_dev_info_get,
+ .queue_setup = fpga_queue_setup,
+ .queue_stop = fpga_queue_stop,
+ .queue_start = fpga_queue_start,
+ .queue_release = fpga_queue_release,
};
/* Initialization Function */
--
1.8.3.1
next prev parent reply other threads:[~2020-04-18 22:47 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-18 22:46 [dpdk-dev] [PATCH v5 00/11] drivers/baseband: PMD for FPGA 5GNR FEC Nicolas Chautru
2020-04-18 22:46 ` [dpdk-dev] [PATCH v5 01/11] drivers/baseband: add " Nicolas Chautru
2020-04-18 22:46 ` [dpdk-dev] [PATCH v5 02/11] baseband/fpga_5gnr_fec: add register definition file Nicolas Chautru
2020-04-18 22:46 ` [dpdk-dev] [PATCH v5 03/11] baseband/fpga_5gnr_fec: add info_get function Nicolas Chautru
2020-04-18 22:46 ` Nicolas Chautru [this message]
2020-04-18 22:46 ` [dpdk-dev] [PATCH v5 05/11] baseband/fpga_5gnr_fec: add LDPC processing functions Nicolas Chautru
2020-04-18 22:46 ` [dpdk-dev] [PATCH v5 06/11] baseband/fpga_5gnr_fec: add HW error capture Nicolas Chautru
2020-04-18 22:46 ` [dpdk-dev] [PATCH v5 07/11] baseband/fpga_5gnr_fec: add debug functionality Nicolas Chautru
2020-04-18 22:46 ` [dpdk-dev] [PATCH v5 08/11] baseband/fpga_5gnr_fec: add configure function Nicolas Chautru
2020-04-18 22:46 ` [dpdk-dev] [PATCH v5 09/11] baseband/fpga_5gnr_fec: add harq loopback capability Nicolas Chautru
2020-04-18 22:46 ` [dpdk-dev] [PATCH v5 10/11] baseband/fpga_5gnr_fec: add interrupt support Nicolas Chautru
2020-04-18 22:46 ` [dpdk-dev] [PATCH v5 11/11] doc: add feature matrix table for bbdev devices Nicolas Chautru
2020-04-19 15:37 ` [dpdk-dev] [PATCH v5 00/11] drivers/baseband: PMD for FPGA 5GNR FEC Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1587250008-69892-5-git-send-email-nicolas.chautru@intel.com \
--to=nicolas.chautru@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).