DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Wei Hu (Xavier)" <xavier.huwei@huawei.com>
To: <dev@dpdk.org>
Cc: <xavier.huwei@huawei.com>
Subject: [dpdk-dev] [PATCH v 3/4] net/hns3: fix VLAN tags report in Rx
Date: Wed, 3 Jun 2020 17:32:00 +0800	[thread overview]
Message-ID: <1591176721-46875-4-git-send-email-xavier.huwei@huawei.com> (raw)
In-Reply-To: <1591176721-46875-1-git-send-email-xavier.huwei@huawei.com>

Currently, based on hns3 network engine, driver always reports the incoming
packet's VLAN tags to the structure rte_mbuf those are the output parameter
pointers in '.rx_pkt_burst' ops implementation function, and never reports
PKT_RX_VLAN_STRIPPED flag to the structure rte_mbuf even if Upper Level
Process configured hardware strip by calling rte_eth_dev_configure or
rte_eth_dev_set_vlan_offload API function. It makes the ULP unable to know
the stripping of VLAN.

It is supposed to present the stripped flags to the mbuf ol_flags, and
report the right VLAN tag.

And as hardware constraints, the stripped VLAN tag will always in the Rx
descriptor. Even if setting a PVID based on the function, the PVID will be
reported to the Rx descriptor. So the driver need to determine which VLAN
tag should be reported to output the structure rte_mbuf in '.rx_pkt_burst'
ops implementation function named hns3_recv_pkts.

Fixes: bba636698316 ("net/hns3: support Rx/Tx and related operations")
Fixes: 411d23b9eafb ("net/hns3: support VLAN")
Cc: stable@dpdk.org

Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
---
 drivers/net/hns3/hns3_ethdev.c | 44 +++++++++++++------------------
 drivers/net/hns3/hns3_ethdev.h | 15 ++++++-----
 drivers/net/hns3/hns3_rxtx.c   | 60 ++++++++++++++++++++++++++++++++++++++----
 3 files changed, 82 insertions(+), 37 deletions(-)

diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index 244a3b8..62d8758 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -35,8 +35,6 @@
 #define HNS3_DEFAULT_PORT_CONF_QUEUES_NUM	1
 
 #define HNS3_SERVICE_INTERVAL		1000000 /* us */
-#define HNS3_PORT_BASE_VLAN_DISABLE	0
-#define HNS3_PORT_BASE_VLAN_ENABLE	1
 #define HNS3_INVLID_PVID		0xFFFF
 
 #define HNS3_FILTER_TYPE_VF		0
@@ -313,13 +311,14 @@ static int
 hns3_restore_vlan_table(struct hns3_adapter *hns)
 {
 	struct hns3_user_vlan_table *vlan_entry;
+	struct hns3_hw *hw = &hns->hw;
 	struct hns3_pf *pf = &hns->pf;
 	uint16_t vlan_id;
 	int ret = 0;
 
-	if (pf->port_base_vlan_cfg.state == HNS3_PORT_BASE_VLAN_ENABLE)
+	if (hw->port_base_vlan_cfg.state == HNS3_PORT_BASE_VLAN_ENABLE)
 		return hns3_vlan_pvid_configure(hns,
-						pf->port_base_vlan_cfg.pvid, 1);
+						hw->port_base_vlan_cfg.pvid, 1);
 
 	LIST_FOREACH(vlan_entry, &pf->vlan_list, next) {
 		if (vlan_entry->hd_tbl_status) {
@@ -336,7 +335,7 @@ hns3_restore_vlan_table(struct hns3_adapter *hns)
 static int
 hns3_vlan_filter_configure(struct hns3_adapter *hns, uint16_t vlan_id, int on)
 {
-	struct hns3_pf *pf = &hns->pf;
+	struct hns3_hw *hw = &hns->hw;
 	bool writen_to_tbl = false;
 	int ret = 0;
 
@@ -354,7 +353,7 @@ hns3_vlan_filter_configure(struct hns3_adapter *hns, uint16_t vlan_id, int on)
 	 * vlan list. The vlan id in vlan list will be writen in vlan filter
 	 * table until port base vlan disabled
 	 */
-	if (pf->port_base_vlan_cfg.state == HNS3_PORT_BASE_VLAN_DISABLE) {
+	if (hw->port_base_vlan_cfg.state == HNS3_PORT_BASE_VLAN_DISABLE) {
 		ret = hns3_set_port_vlan_filter(hns, vlan_id, on);
 		writen_to_tbl = true;
 	}
@@ -507,11 +506,10 @@ static int
 hns3_en_hw_strip_rxvtag(struct hns3_adapter *hns, bool enable)
 {
 	struct hns3_rx_vtag_cfg rxvlan_cfg;
-	struct hns3_pf *pf = &hns->pf;
 	struct hns3_hw *hw = &hns->hw;
 	int ret;
 
-	if (pf->port_base_vlan_cfg.state == HNS3_PORT_BASE_VLAN_DISABLE) {
+	if (hw->port_base_vlan_cfg.state == HNS3_PORT_BASE_VLAN_DISABLE) {
 		rxvlan_cfg.strip_tag1_en = false;
 		rxvlan_cfg.strip_tag2_en = enable;
 	} else {
@@ -728,12 +726,12 @@ hns3_vlan_txvlan_cfg(struct hns3_adapter *hns, uint16_t port_base_vlan_state,
 static void
 hns3_store_port_base_vlan_info(struct hns3_adapter *hns, uint16_t pvid, int on)
 {
-	struct hns3_pf *pf = &hns->pf;
+	struct hns3_hw *hw = &hns->hw;
 
-	pf->port_base_vlan_cfg.state = on ?
+	hw->port_base_vlan_cfg.state = on ?
 	    HNS3_PORT_BASE_VLAN_ENABLE : HNS3_PORT_BASE_VLAN_DISABLE;
 
-	pf->port_base_vlan_cfg.pvid = pvid;
+	hw->port_base_vlan_cfg.pvid = pvid;
 }
 
 static void
@@ -777,13 +775,12 @@ static void
 hns3_remove_all_vlan_table(struct hns3_adapter *hns)
 {
 	struct hns3_hw *hw = &hns->hw;
-	struct hns3_pf *pf = &hns->pf;
 	int ret;
 
 	hns3_rm_all_vlan_table(hns, true);
-	if (pf->port_base_vlan_cfg.pvid != HNS3_INVLID_PVID) {
+	if (hw->port_base_vlan_cfg.pvid != HNS3_INVLID_PVID) {
 		ret = hns3_set_port_vlan_filter(hns,
-						pf->port_base_vlan_cfg.pvid, 0);
+						hw->port_base_vlan_cfg.pvid, 0);
 		if (ret) {
 			hns3_err(hw, "Failed to remove all vlan table, ret =%d",
 				 ret);
@@ -797,7 +794,6 @@ hns3_update_vlan_filter_entries(struct hns3_adapter *hns,
 				uint16_t port_base_vlan_state,
 				uint16_t new_pvid, uint16_t old_pvid)
 {
-	struct hns3_pf *pf = &hns->pf;
 	struct hns3_hw *hw = &hns->hw;
 	int ret = 0;
 
@@ -825,7 +821,7 @@ hns3_update_vlan_filter_entries(struct hns3_adapter *hns,
 		}
 	}
 
-	if (new_pvid == pf->port_base_vlan_cfg.pvid)
+	if (new_pvid == hw->port_base_vlan_cfg.pvid)
 		hns3_add_all_vlan_table(hns);
 
 	return ret;
@@ -862,17 +858,16 @@ hns3_en_pvid_strip(struct hns3_adapter *hns, int on)
 static int
 hns3_vlan_pvid_configure(struct hns3_adapter *hns, uint16_t pvid, int on)
 {
-	struct hns3_pf *pf = &hns->pf;
 	struct hns3_hw *hw = &hns->hw;
 	uint16_t port_base_vlan_state;
 	uint16_t old_pvid;
 	int ret;
 
-	if (on == 0 && pvid != pf->port_base_vlan_cfg.pvid) {
-		if (pf->port_base_vlan_cfg.pvid != HNS3_INVLID_PVID)
+	if (on == 0 && pvid != hw->port_base_vlan_cfg.pvid) {
+		if (hw->port_base_vlan_cfg.pvid != HNS3_INVLID_PVID)
 			hns3_warn(hw, "Invalid operation! As current pvid set "
 				  "is %u, disable pvid %u is invalid",
-				  pf->port_base_vlan_cfg.pvid, pvid);
+				  hw->port_base_vlan_cfg.pvid, pvid);
 		return 0;
 	}
 
@@ -894,7 +889,7 @@ hns3_vlan_pvid_configure(struct hns3_adapter *hns, uint16_t pvid, int on)
 
 	if (pvid == HNS3_INVLID_PVID)
 		goto out;
-	old_pvid = pf->port_base_vlan_cfg.pvid;
+	old_pvid = hw->port_base_vlan_cfg.pvid;
 	ret = hns3_update_vlan_filter_entries(hns, port_base_vlan_state, pvid,
 					      old_pvid);
 	if (ret) {
@@ -930,11 +925,8 @@ hns3_vlan_pvid_set(struct rte_eth_dev *dev, uint16_t pvid, int on)
 static void
 init_port_base_vlan_info(struct hns3_hw *hw)
 {
-	struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
-	struct hns3_pf *pf = &hns->pf;
-
-	pf->port_base_vlan_cfg.state = HNS3_PORT_BASE_VLAN_DISABLE;
-	pf->port_base_vlan_cfg.pvid = HNS3_INVLID_PVID;
+	hw->port_base_vlan_cfg.state = HNS3_PORT_BASE_VLAN_DISABLE;
+	hw->port_base_vlan_cfg.pvid = HNS3_INVLID_PVID;
 }
 
 static int
diff --git a/drivers/net/hns3/hns3_ethdev.h b/drivers/net/hns3/hns3_ethdev.h
index bc458cb..21412c4 100644
--- a/drivers/net/hns3/hns3_ethdev.h
+++ b/drivers/net/hns3/hns3_ethdev.h
@@ -171,6 +171,13 @@ struct hns3_fake_queue_data {
 	uint16_t nb_fake_tx_queues; /* Number of fake TX queues. */
 };
 
+#define HNS3_PORT_BASE_VLAN_DISABLE	0
+#define HNS3_PORT_BASE_VLAN_ENABLE	1
+struct hns3_port_base_vlan_config {
+	uint16_t state;
+	uint16_t pvid;
+};
+
 /* Primary process maintains driver state in main thread.
  *
  * +---------------+
@@ -395,6 +402,8 @@ struct hns3_hw {
 	uint16_t tx_qnum_per_tc;    /* TX queue number per TC */
 
 	uint32_t flag;
+
+	struct hns3_port_base_vlan_config port_base_vlan_cfg;
 	/*
 	 * PMD setup and configuration is not thread safe. Since it is not
 	 * performance sensitive, it is better to guarantee thread-safety
@@ -424,11 +433,6 @@ struct hns3_user_vlan_table {
 	uint16_t vlan_id;
 };
 
-struct hns3_port_base_vlan_config {
-	uint16_t state;
-	uint16_t pvid;
-};
-
 /* Vlan tag configuration for RX direction */
 struct hns3_rx_vtag_cfg {
 	uint8_t rx_vlan_offload_en; /* Whether enable rx vlan offload */
@@ -504,7 +508,6 @@ struct hns3_pf {
 	bool support_sfp_query;
 
 	struct hns3_vtag_cfg vtag_config;
-	struct hns3_port_base_vlan_config port_base_vlan_cfg;
 	LIST_HEAD(vlan_tbl, hns3_user_vlan_table) vlan_list;
 
 	struct hns3_fdir_info fdir; /* flow director info */
diff --git a/drivers/net/hns3/hns3_rxtx.c b/drivers/net/hns3/hns3_rxtx.c
index 25ba3b8..d870d51 100644
--- a/drivers/net/hns3/hns3_rxtx.c
+++ b/drivers/net/hns3/hns3_rxtx.c
@@ -1255,9 +1255,9 @@ rxd_pkt_info_to_pkt_type(uint32_t pkt_info, uint32_t ol_info)
 
 	static const uint32_t l2table[HNS3_L2TBL_NUM] = {
 		RTE_PTYPE_L2_ETHER,
-		RTE_PTYPE_L2_ETHER_VLAN,
 		RTE_PTYPE_L2_ETHER_QINQ,
-		0
+		RTE_PTYPE_L2_ETHER_VLAN,
+		RTE_PTYPE_L2_ETHER_VLAN
 	};
 
 	static const uint32_t l3table[HNS3_L3TBL_NUM] = {
@@ -1450,6 +1450,58 @@ hns3_rx_set_cksum_flag(struct rte_mbuf *rxm, uint64_t packet_type,
 	}
 }
 
+static inline void
+hns3_rxd_to_vlan_tci(struct rte_eth_dev *dev, struct rte_mbuf *mb,
+		     uint32_t l234_info, const struct hns3_desc *rxd)
+{
+#define HNS3_STRP_STATUS_NUM		0x4
+
+#define HNS3_NO_STRP_VLAN_VLD		0x0
+#define HNS3_INNER_STRP_VLAN_VLD	0x1
+#define HNS3_OUTER_STRP_VLAN_VLD	0x2
+	struct hns3_adapter *hns = dev->data->dev_private;
+	struct hns3_hw *hw = &hns->hw;
+	uint32_t strip_status;
+	uint32_t report_mode;
+
+	/*
+	 * Since HW limiation, the vlan tag will always be inserted into RX
+	 * descriptor when strip the tag from packet, dirver needs to determine
+	 * reporting which tag to mbuf according to the PVID configuration
+	 * and vlan striped status.
+	 */
+	static const uint32_t report_type[][HNS3_STRP_STATUS_NUM] = {
+		{
+			HNS3_NO_STRP_VLAN_VLD,
+			HNS3_OUTER_STRP_VLAN_VLD,
+			HNS3_INNER_STRP_VLAN_VLD,
+			HNS3_OUTER_STRP_VLAN_VLD
+		},
+		{
+			HNS3_NO_STRP_VLAN_VLD,
+			HNS3_NO_STRP_VLAN_VLD,
+			HNS3_NO_STRP_VLAN_VLD,
+			HNS3_INNER_STRP_VLAN_VLD
+		}
+	};
+	strip_status = hns3_get_field(l234_info, HNS3_RXD_STRP_TAGP_M,
+				      HNS3_RXD_STRP_TAGP_S);
+	report_mode = report_type[hw->port_base_vlan_cfg.state][strip_status];
+	switch (report_mode) {
+	case HNS3_NO_STRP_VLAN_VLD:
+		mb->vlan_tci = 0;
+		return;
+	case HNS3_INNER_STRP_VLAN_VLD:
+		mb->ol_flags |= PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED;
+		mb->vlan_tci = rte_le_to_cpu_16(rxd->rx.vlan_tag);
+		return;
+	case HNS3_OUTER_STRP_VLAN_VLD:
+		mb->ol_flags |= PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED;
+		mb->vlan_tci = rte_le_to_cpu_16(rxd->rx.ot_vlan_tag);
+		return;
+	}
+}
+
 uint16_t
 hns3_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
 {
@@ -1625,10 +1677,8 @@ hns3_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
 			hns3_rx_set_cksum_flag(first_seg,
 					       first_seg->packet_type,
 					       cksum_err);
+		hns3_rxd_to_vlan_tci(dev, first_seg, l234_info, &rxd);
 
-		first_seg->vlan_tci = rte_le_to_cpu_16(rxd.rx.vlan_tag);
-		first_seg->vlan_tci_outer =
-			rte_le_to_cpu_16(rxd.rx.ot_vlan_tag);
 		rx_pkts[nb_rx++] = first_seg;
 		first_seg = NULL;
 		continue;
-- 
2.7.4


  parent reply	other threads:[~2020-06-03  9:34 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-03  9:31 [dpdk-dev] [PATCH v 0/4] bugfixes for hns3 PMD driver Wei Hu (Xavier)
2020-06-03  9:31 ` [dpdk-dev] [PATCH v 1/4] net/hns3: remove unsupported VLAN capabilities Wei Hu (Xavier)
2020-06-03  9:31 ` [dpdk-dev] [PATCH v 2/4] net/hns3: fix VLAN strip configuration when setting a PVID Wei Hu (Xavier)
2020-06-03  9:32 ` Wei Hu (Xavier) [this message]
2020-06-03  9:32 ` [dpdk-dev] [PATCH v 4/4] net/hns3: add checking tso segsz when sending TSO packets Wei Hu (Xavier)
2020-06-04 16:56   ` Ferruh Yigit
2020-06-05  8:50     ` Wei Hu (Xavier)
2020-06-05  9:44       ` Ferruh Yigit
2020-06-06  1:06         ` Wei Hu (Xavier)
2020-06-05  9:44 ` [dpdk-dev] [PATCH v 0/4] bugfixes for hns3 PMD driver Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1591176721-46875-4-git-send-email-xavier.huwei@huawei.com \
    --to=xavier.huwei@huawei.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).