From: "Wei Hu (Xavier)" <xavier.huwei@huawei.com>
To: <ferruh.yigit@intel.com>, <arybchenko@solarflare.com>
Cc: <dev@dpdk.org>, <xavier.huwei@huawei.com>
Subject: [dpdk-dev] [PATCH v2 2/2] ethdev: fix VLAN offloads set if no relative capabilities
Date: Sat, 20 Jun 2020 14:53:36 +0800 [thread overview]
Message-ID: <1592636016-5836-3-git-send-email-xavier.huwei@huawei.com> (raw)
In-Reply-To: <1592636016-5836-1-git-send-email-xavier.huwei@huawei.com>
Currently, there is a potential problem that calling the API function
rte_eth_dev_set_vlan_offload to start VLAN hardware offloads which the
driver does not support. If the PMD driver does not support certain VLAN
hardware offloads and does not check for it, the hardware setting will
not change, but the VLAN offloads in dev->data->dev_conf.rxmode.offloads
will be turned on.
It is supposed to check the hardware capabilities to decide whether the
relative callback needs to be called just like the behavior in the API
function named rte_eth_dev_configure. And it is also needed to cleanup
duplicated checks which are done in some PMDs.
Fixes: a4996bd89c42 ("ethdev: new Rx/Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
---
v1 -> v2: cleanup duplicated checks which are done in som PMDs.
---
drivers/net/dpaa2/dpaa2_ethdev.c | 5 -----
drivers/net/enic/enic_ethdev.c | 12 ------------
drivers/net/fm10k/fm10k_ethdev.c | 20 --------------------
drivers/net/hinic/hinic_pmd_ethdev.c | 6 ------
drivers/net/i40e/i40e_ethdev.c | 5 -----
drivers/net/nfp/nfp_net.c | 5 -----
drivers/net/octeontx/octeontx_ethdev_ops.c | 10 ----------
drivers/net/octeontx2/otx2_vlan.c | 5 -----
drivers/net/qede/qede_ethdev.c | 3 ---
lib/librte_ethdev/rte_ethdev.c | 21 +++++++++++++++++++++
10 files changed, 21 insertions(+), 71 deletions(-)
diff --git a/drivers/net/dpaa2/dpaa2_ethdev.c b/drivers/net/dpaa2/dpaa2_ethdev.c
index 2f031ec..da5018f 100644
--- a/drivers/net/dpaa2/dpaa2_ethdev.c
+++ b/drivers/net/dpaa2/dpaa2_ethdev.c
@@ -169,11 +169,6 @@ dpaa2_vlan_offload_set(struct rte_eth_dev *dev, int mask)
DPAA2_PMD_INFO("Unable to set vlan filter = %d", ret);
}
next_mask:
- if (mask & ETH_VLAN_EXTEND_MASK) {
- if (dev->data->dev_conf.rxmode.offloads &
- DEV_RX_OFFLOAD_VLAN_EXTEND)
- DPAA2_PMD_INFO("VLAN extend offload not supported");
- }
return 0;
}
diff --git a/drivers/net/enic/enic_ethdev.c b/drivers/net/enic/enic_ethdev.c
index 32d5397..ef8900d 100644
--- a/drivers/net/enic/enic_ethdev.c
+++ b/drivers/net/enic/enic_ethdev.c
@@ -374,18 +374,6 @@ static int enicpmd_vlan_offload_set(struct rte_eth_dev *eth_dev, int mask)
enic->ig_vlan_strip_en = 0;
}
- if ((mask & ETH_VLAN_FILTER_MASK) &&
- (offloads & DEV_RX_OFFLOAD_VLAN_FILTER)) {
- dev_warning(enic,
- "Configuration of VLAN filter is not supported\n");
- }
-
- if ((mask & ETH_VLAN_EXTEND_MASK) &&
- (offloads & DEV_RX_OFFLOAD_VLAN_EXTEND)) {
- dev_warning(enic,
- "Configuration of extended VLAN is not supported\n");
- }
-
return enic_set_vlan_strip(enic);
}
diff --git a/drivers/net/fm10k/fm10k_ethdev.c b/drivers/net/fm10k/fm10k_ethdev.c
index f537ab2..47f6f76 100644
--- a/drivers/net/fm10k/fm10k_ethdev.c
+++ b/drivers/net/fm10k/fm10k_ethdev.c
@@ -1577,26 +1577,6 @@ fm10k_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
static int
fm10k_vlan_offload_set(struct rte_eth_dev *dev, int mask)
{
- if (mask & ETH_VLAN_STRIP_MASK) {
- if (!(dev->data->dev_conf.rxmode.offloads &
- DEV_RX_OFFLOAD_VLAN_STRIP))
- PMD_INIT_LOG(ERR, "VLAN stripping is "
- "always on in fm10k");
- }
-
- if (mask & ETH_VLAN_EXTEND_MASK) {
- if (dev->data->dev_conf.rxmode.offloads &
- DEV_RX_OFFLOAD_VLAN_EXTEND)
- PMD_INIT_LOG(ERR, "VLAN QinQ is not "
- "supported in fm10k");
- }
-
- if (mask & ETH_VLAN_FILTER_MASK) {
- if (!(dev->data->dev_conf.rxmode.offloads &
- DEV_RX_OFFLOAD_VLAN_FILTER))
- PMD_INIT_LOG(ERR, "VLAN filter is always on in fm10k");
- }
-
return 0;
}
diff --git a/drivers/net/hinic/hinic_pmd_ethdev.c b/drivers/net/hinic/hinic_pmd_ethdev.c
index 0c3e1c0..0009a61 100644
--- a/drivers/net/hinic/hinic_pmd_ethdev.c
+++ b/drivers/net/hinic/hinic_pmd_ethdev.c
@@ -1701,12 +1701,6 @@ static int hinic_vlan_offload_set(struct rte_eth_dev *dev, int mask)
nic_dev->proc_dev_name, dev->data->port_id);
}
- if (mask & ETH_VLAN_EXTEND_MASK) {
- PMD_DRV_LOG(ERR, "Don't support vlan qinq, device: %s, port_id: %d",
- nic_dev->proc_dev_name, dev->data->port_id);
- return -ENOTSUP;
- }
-
return 0;
}
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 970a31c..9211cf5 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -3877,11 +3877,6 @@ i40e_vlan_offload_set(struct rte_eth_dev *dev, int mask)
struct i40e_vsi *vsi = pf->main_vsi;
struct rte_eth_rxmode *rxmode;
- if (mask & ETH_QINQ_STRIP_MASK) {
- PMD_DRV_LOG(ERR, "Strip qinq is not supported.");
- return -ENOTSUP;
- }
-
rxmode = &dev->data->dev_conf.rxmode;
if (mask & ETH_VLAN_FILTER_MASK) {
if (rxmode->offloads & DEV_RX_OFFLOAD_VLAN_FILTER)
diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
index 2460ee1..b7a91ae 100644
--- a/drivers/net/nfp/nfp_net.c
+++ b/drivers/net/nfp/nfp_net.c
@@ -2353,11 +2353,6 @@ nfp_net_vlan_offload_set(struct rte_eth_dev *dev, int mask)
hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
new_ctrl = 0;
- if ((mask & ETH_VLAN_FILTER_OFFLOAD) ||
- (mask & ETH_VLAN_EXTEND_OFFLOAD))
- PMD_DRV_LOG(INFO, "No support for ETH_VLAN_FILTER_OFFLOAD or"
- " ETH_VLAN_EXTEND_OFFLOAD");
-
/* Enable vlan strip if it is not configured yet */
if ((mask & ETH_VLAN_STRIP_OFFLOAD) &&
!(hw->ctrl & NFP_NET_CFG_CTRL_RXVLAN))
diff --git a/drivers/net/octeontx/octeontx_ethdev_ops.c b/drivers/net/octeontx/octeontx_ethdev_ops.c
index ff627a6..dbe13ce 100644
--- a/drivers/net/octeontx/octeontx_ethdev_ops.c
+++ b/drivers/net/octeontx/octeontx_ethdev_ops.c
@@ -43,16 +43,6 @@ octeontx_dev_vlan_offload_set(struct rte_eth_dev *dev, int mask)
rxmode = &dev->data->dev_conf.rxmode;
- if (mask & ETH_VLAN_EXTEND_MASK) {
- octeontx_log_err("Extend offload not supported");
- return -ENOTSUP;
- }
-
- if (mask & ETH_VLAN_STRIP_MASK) {
- octeontx_log_err("VLAN strip offload not supported");
- return -ENOTSUP;
- }
-
if (mask & ETH_VLAN_FILTER_MASK) {
if (rxmode->offloads & DEV_RX_OFFLOAD_VLAN_FILTER) {
rc = octeontx_vlan_hw_filter(nic, true);
diff --git a/drivers/net/octeontx2/otx2_vlan.c b/drivers/net/octeontx2/otx2_vlan.c
index 322a565..7357b06 100644
--- a/drivers/net/octeontx2/otx2_vlan.c
+++ b/drivers/net/octeontx2/otx2_vlan.c
@@ -717,11 +717,6 @@ otx2_nix_vlan_offload_set(struct rte_eth_dev *eth_dev, int mask)
rxmode = ð_dev->data->dev_conf.rxmode;
- if (mask & ETH_VLAN_EXTEND_MASK) {
- otx2_err("Extend offload not supported");
- return -ENOTSUP;
- }
-
if (mask & ETH_VLAN_STRIP_MASK) {
if (rxmode->offloads & DEV_RX_OFFLOAD_VLAN_STRIP) {
offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
diff --git a/drivers/net/qede/qede_ethdev.c b/drivers/net/qede/qede_ethdev.c
index c4f8f12..04d17c7 100644
--- a/drivers/net/qede/qede_ethdev.c
+++ b/drivers/net/qede/qede_ethdev.c
@@ -1036,9 +1036,6 @@ static int qede_vlan_offload_set(struct rte_eth_dev *eth_dev, int mask)
}
}
- if (mask & ETH_VLAN_EXTEND_MASK)
- DP_ERR(edev, "Extend VLAN not supported\n");
-
qdev->vlan_offload_mask = mask;
DP_INFO(edev, "VLAN offload mask %d\n", mask);
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index b0b0474..bf79749 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -3260,12 +3260,14 @@ rte_eth_dev_set_vlan_ether_type(uint16_t port_id,
int
rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask)
{
+ struct rte_eth_dev_info dev_info;
struct rte_eth_dev *dev;
int ret = 0;
int mask = 0;
int cur, org = 0;
uint64_t orig_offloads;
uint64_t dev_offloads;
+ uint64_t new_offloads;
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
dev = &rte_eth_devices[port_id];
@@ -3319,6 +3321,25 @@ rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask)
if (mask == 0)
return ret;
+ ret = rte_eth_dev_info_get(port_id, &dev_info);
+ if (ret != 0)
+ return ret;
+
+ /*
+ * New added Rx VLAN offloading which are not enabled in
+ * rte_eth_dev_configure() must be within its device capabilities
+ */
+ if ((dev_offloads & dev_info.rx_offload_capa) != dev_offloads) {
+ new_offloads = dev_offloads & ~orig_offloads;
+ RTE_ETHDEV_LOG(ERR,
+ "Ethdev port_id=%u requested new added VLAN offloads "
+ "0x%" PRIx64 " must be within Rx offloads capabilities "
+ "0x%" PRIx64 " in %s()\n",
+ port_id, new_offloads, dev_info.rx_offload_capa,
+ __func__);
+ return -EINVAL;
+ }
+
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_offload_set, -ENOTSUP);
dev->data->dev_conf.rxmode.offloads = dev_offloads;
ret = (*dev->dev_ops->vlan_offload_set)(dev, mask);
--
2.7.4
next prev parent reply other threads:[~2020-06-20 6:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-20 6:53 [dpdk-dev] [PATCH v2 0/2] ethdev: minor bugfixes Wei Hu (Xavier)
2020-06-20 6:53 ` [dpdk-dev] [PATCH v2 1/2] ethdev: fix data room size verification in Rx queue setup Wei Hu (Xavier)
2020-06-20 6:53 ` Wei Hu (Xavier) [this message]
2020-06-21 13:44 ` [dpdk-dev] [PATCH v2 2/2] ethdev: fix VLAN offloads set if no relative capabilities Andrew Rybchenko
2020-06-22 2:57 ` Wei Hu (Xavier)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1592636016-5836-3-git-send-email-xavier.huwei@huawei.com \
--to=xavier.huwei@huawei.com \
--cc=arybchenko@solarflare.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).