From: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
To: dev@dpdk.org
Cc: matan@mellanox.com, rasland@mellanox.com, olivier.matz@6wind.com,
thomas@monjalon.net, ferruh.yigit@intel.com
Subject: [dpdk-dev] [PATCH v3 01/17] common/mlx5: update common part to support packet pacing
Date: Thu, 16 Jul 2020 08:23:04 +0000 [thread overview]
Message-ID: <1594887800-6563-2-git-send-email-viacheslavo@mellanox.com> (raw)
In-Reply-To: <1594887800-6563-1-git-send-email-viacheslavo@mellanox.com>
This patch prepares the common part of the mlx5 PMDs to
support packet send scheduling on mbuf timestamps:
- the DevX routine to query the packet pacing HCA capabilities
- packet pacing Send Queue attributes support
- the hardware related definitions
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
---
drivers/common/mlx5/Makefile | 25 +++++++++++++
drivers/common/mlx5/linux/meson.build | 10 +++++
drivers/common/mlx5/linux/mlx5_glue.c | 31 +++++++++++++++-
drivers/common/mlx5/linux/mlx5_glue.h | 5 +++
drivers/common/mlx5/mlx5_devx_cmds.c | 19 +++++++++-
drivers/common/mlx5/mlx5_devx_cmds.h | 10 +++++
drivers/common/mlx5/mlx5_prm.h | 69 ++++++++++++++++++++++++++++++++---
7 files changed, 161 insertions(+), 8 deletions(-)
diff --git a/drivers/common/mlx5/Makefile b/drivers/common/mlx5/Makefile
index f6c762b..f9dc376 100644
--- a/drivers/common/mlx5/Makefile
+++ b/drivers/common/mlx5/Makefile
@@ -172,6 +172,16 @@ mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-config-h.sh
func mlx5dv_devx_qp_query \
$(AUTOCONF_OUTPUT)
$Q sh -- '$<' '$@' \
+ HAVE_MLX5DV_DEVX_UAR_OFFSET \
+ infiniband/mlx5dv.h \
+ field "struct mlx5dv_devx_uar.mmap_off" \
+ $(AUTOCONF_OUTPUT)
+ $Q sh -- '$<' '$@' \
+ HAVE_MLX5DV_PP_ALLOC \
+ infiniband/mlx5dv.h \
+ func mlx5dv_pp_alloc \
+ $(AUTOCONF_OUTPUT)
+ $Q sh -- '$<' '$@' \
HAVE_MLX5DV_DR_ACTION_DEST_DEVX_TIR \
infiniband/mlx5dv.h \
func mlx5dv_dr_action_create_dest_devx_tir \
@@ -207,6 +217,21 @@ mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-config-h.sh
func mlx5dv_dr_domain_set_reclaim_device_memory \
$(AUTOCONF_OUTPUT)
$Q sh -- '$<' '$@' \
+ HAVE_MLX5_OPCODE_ENHANCED_MPSW \
+ infiniband/mlx5dv.h \
+ enum MLX5_OPCODE_ENHANCED_MPSW \
+ $(AUTOCONF_OUTPUT)
+ $Q sh -- '$<' '$@' \
+ HAVE_MLX5_OPCODE_SEND_EN \
+ infiniband/mlx5dv.h \
+ enum MLX5_OPCODE_SEND_EN \
+ $(AUTOCONF_OUTPUT)
+ $Q sh -- '$<' '$@' \
+ HAVE_MLX5_OPCODE_WAIT \
+ infiniband/mlx5dv.h \
+ enum MLX5_OPCODE_WAIT \
+ $(AUTOCONF_OUTPUT)
+ $Q sh -- '$<' '$@' \
HAVE_ETHTOOL_LINK_MODE_25G \
/usr/include/linux/ethtool.h \
enum ETHTOOL_LINK_MODE_25000baseCR_Full_BIT \
diff --git a/drivers/common/mlx5/linux/meson.build b/drivers/common/mlx5/linux/meson.build
index 2294213..48e8ad6 100644
--- a/drivers/common/mlx5/linux/meson.build
+++ b/drivers/common/mlx5/linux/meson.build
@@ -64,6 +64,8 @@ has_member_args = [
'struct ibv_counter_set_init_attr', 'counter_set_id' ],
[ 'HAVE_IBV_DEVICE_COUNTERS_SET_V45', 'infiniband/verbs.h',
'struct ibv_counters_init_attr', 'comp_mask' ],
+ [ 'HAVE_MLX5DV_DEVX_UAR_OFFSET', 'infiniband/mlx5dv.h',
+ 'struct mlx5dv_devx_uar', 'mmap_off' ],
]
# input array for meson symbol search:
# [ "MACRO to define if found", "header for the search",
@@ -101,6 +103,8 @@ has_sym_args = [
'mlx5dv_devx_obj_query_async' ],
[ 'HAVE_IBV_DEVX_QP', 'infiniband/mlx5dv.h',
'mlx5dv_devx_qp_query' ],
+ [ 'HAVE_MLX5DV_PP_ALLOC', 'infiniband/mlx5dv.h',
+ 'mlx5dv_pp_alloc' ],
[ 'HAVE_MLX5DV_DR_ACTION_DEST_DEVX_TIR', 'infiniband/mlx5dv.h',
'mlx5dv_dr_action_create_dest_devx_tir' ],
[ 'HAVE_IBV_DEVX_EVENT', 'infiniband/mlx5dv.h',
@@ -116,6 +120,12 @@ has_sym_args = [
[ 'HAVE_MLX5DV_DR_VLAN', 'infiniband/mlx5dv.h',
'mlx5dv_dr_action_create_push_vlan' ],
[ 'HAVE_IBV_VAR', 'infiniband/mlx5dv.h', 'mlx5dv_alloc_var' ],
+ [ 'HAVE_MLX5_OPCODE_ENHANCED_MPSW', 'infiniband/mlx5dv.h',
+ 'MLX5_OPCODE_ENHANCED_MPSW' ],
+ [ 'HAVE_MLX5_OPCODE_SEND_EN', 'infiniband/mlx5dv.h',
+ 'MLX5_OPCODE_SEND_EN' ],
+ [ 'HAVE_MLX5_OPCODE_WAIT', 'infiniband/mlx5dv.h',
+ 'MLX5_OPCODE_WAIT' ],
[ 'HAVE_SUPPORTED_40000baseKR4_Full', 'linux/ethtool.h',
'SUPPORTED_40000baseKR4_Full' ],
[ 'HAVE_SUPPORTED_40000baseCR4_Full', 'linux/ethtool.h',
diff --git a/drivers/common/mlx5/linux/mlx5_glue.c b/drivers/common/mlx5/linux/mlx5_glue.c
index 395519d..4d3875f 100644
--- a/drivers/common/mlx5/linux/mlx5_glue.c
+++ b/drivers/common/mlx5/linux/mlx5_glue.c
@@ -1195,7 +1195,6 @@
#endif
}
-
static void
mlx5_glue_dr_reclaim_domain_memory(void *domain, uint32_t enable)
{
@@ -1207,6 +1206,34 @@
#endif
}
+static struct mlx5dv_pp *
+mlx5_glue_dv_alloc_pp(struct ibv_context *context,
+ size_t pp_context_sz,
+ const void *pp_context,
+ uint32_t flags)
+{
+#ifdef HAVE_MLX5DV_PP_ALLOC
+ return mlx5dv_pp_alloc(context, pp_context_sz, pp_context, flags);
+#else
+ RTE_SET_USED(context);
+ RTE_SET_USED(pp_context_sz);
+ RTE_SET_USED(pp_context);
+ RTE_SET_USED(flags);
+ errno = ENOTSUP;
+ return NULL;
+#endif
+}
+
+static void
+mlx5_glue_dv_free_pp(struct mlx5dv_pp *pp)
+{
+#ifdef HAVE_MLX5DV_PP_ALLOC
+ mlx5dv_pp_free(pp);
+#else
+ RTE_SET_USED(pp);
+#endif
+}
+
__rte_cache_aligned
const struct mlx5_glue *mlx5_glue = &(const struct mlx5_glue) {
.version = MLX5_GLUE_VERSION,
@@ -1319,4 +1346,6 @@
.devx_free_uar = mlx5_glue_devx_free_uar,
.dv_alloc_var = mlx5_glue_dv_alloc_var,
.dv_free_var = mlx5_glue_dv_free_var,
+ .dv_alloc_pp = mlx5_glue_dv_alloc_pp,
+ .dv_free_pp = mlx5_glue_dv_free_pp,
};
diff --git a/drivers/common/mlx5/linux/mlx5_glue.h b/drivers/common/mlx5/linux/mlx5_glue.h
index 069d854..c4f9b00 100644
--- a/drivers/common/mlx5/linux/mlx5_glue.h
+++ b/drivers/common/mlx5/linux/mlx5_glue.h
@@ -304,6 +304,11 @@ struct mlx5_glue {
struct mlx5dv_devx_async_event_hdr *event_data,
size_t event_resp_len);
void (*dr_reclaim_domain_memory)(void *domain, uint32_t enable);
+ struct mlx5dv_pp *(*dv_alloc_pp)(struct ibv_context *context,
+ size_t pp_context_sz,
+ const void *pp_context,
+ uint32_t flags);
+ void (*dv_free_pp)(struct mlx5dv_pp *pp);
};
extern const struct mlx5_glue *mlx5_glue;
diff --git a/drivers/common/mlx5/mlx5_devx_cmds.c b/drivers/common/mlx5/mlx5_devx_cmds.c
index 2179a83..093636c 100644
--- a/drivers/common/mlx5/mlx5_devx_cmds.c
+++ b/drivers/common/mlx5/mlx5_devx_cmds.c
@@ -467,6 +467,14 @@ struct mlx5_devx_obj *
attr->vdpa.queue_counters_valid = !!(MLX5_GET64(cmd_hca_cap, hcattr,
general_obj_types) &
MLX5_GENERAL_OBJ_TYPES_CAP_VIRTIO_Q_COUNTERS);
+ attr->wqe_index_ignore = MLX5_GET(cmd_hca_cap, hcattr,
+ wqe_index_ignore_cap);
+ attr->cross_channel = MLX5_GET(cmd_hca_cap, hcattr, cd);
+ attr->non_wire_sq = MLX5_GET(cmd_hca_cap, hcattr, non_wire_sq);
+ attr->log_max_static_sq_wq = MLX5_GET(cmd_hca_cap, hcattr,
+ log_max_static_sq_wq);
+ attr->dev_freq_khz = MLX5_GET(cmd_hca_cap, hcattr,
+ device_frequency_khz);
if (attr->qos.sup) {
MLX5_SET(query_hca_cap_in, in, op_mod,
MLX5_GET_HCA_CAP_OP_MOD_QOS_CAP |
@@ -487,9 +495,13 @@ struct mlx5_devx_obj *
attr->qos.log_max_flow_meter =
MLX5_GET(qos_cap, hcattr, log_max_flow_meter);
attr->qos.flow_meter_reg_c_ids =
- MLX5_GET(qos_cap, hcattr, flow_meter_reg_id);
+ MLX5_GET(qos_cap, hcattr, flow_meter_reg_id);
attr->qos.flow_meter_reg_share =
- MLX5_GET(qos_cap, hcattr, flow_meter_reg_share);
+ MLX5_GET(qos_cap, hcattr, flow_meter_reg_share);
+ attr->qos.packet_pacing =
+ MLX5_GET(qos_cap, hcattr, packet_pacing);
+ attr->qos.wqe_rate_pp =
+ MLX5_GET(qos_cap, hcattr, wqe_rate_pp);
}
if (attr->vdpa.valid)
mlx5_devx_cmd_query_hca_vdpa_attr(ctx, &attr->vdpa);
@@ -971,6 +983,8 @@ struct mlx5_devx_obj *
MLX5_SET(sqc, sq_ctx, reg_umr, sq_attr->reg_umr);
MLX5_SET(sqc, sq_ctx, allow_swp, sq_attr->allow_swp);
MLX5_SET(sqc, sq_ctx, hairpin, sq_attr->hairpin);
+ MLX5_SET(sqc, sq_ctx, non_wire, sq_attr->non_wire);
+ MLX5_SET(sqc, sq_ctx, static_sq_wq, sq_attr->static_sq_wq);
MLX5_SET(sqc, sq_ctx, user_index, sq_attr->user_index);
MLX5_SET(sqc, sq_ctx, cqn, sq_attr->cqn);
MLX5_SET(sqc, sq_ctx, packet_pacing_rate_limit_index,
@@ -1185,6 +1199,7 @@ struct mlx5_devx_obj *
} else {
MLX5_SET64(cqc, cqctx, dbr_addr, attr->db_addr);
}
+ MLX5_SET(cqc, cqctx, cqe_sz, attr->cqe_size);
MLX5_SET(cqc, cqctx, cc, attr->use_first_only);
MLX5_SET(cqc, cqctx, oi, attr->overrun_ignore);
MLX5_SET(cqc, cqctx, log_cq_size, attr->log_cq_size);
diff --git a/drivers/common/mlx5/mlx5_devx_cmds.h b/drivers/common/mlx5/mlx5_devx_cmds.h
index 25704ef..c79b349 100644
--- a/drivers/common/mlx5/mlx5_devx_cmds.h
+++ b/drivers/common/mlx5/mlx5_devx_cmds.h
@@ -29,6 +29,8 @@ struct mlx5_devx_mkey_attr {
struct mlx5_hca_qos_attr {
uint32_t sup:1; /* Whether QOS is supported. */
uint32_t srtcm_sup:1; /* Whether srTCM mode is supported. */
+ uint32_t packet_pacing:1; /* Packet pacing is supported. */
+ uint32_t wqe_rate_pp:1; /* Packet pacing WQE rate mode. */
uint32_t flow_meter_reg_share:1;
/* Whether reg_c share is supported. */
uint8_t log_max_flow_meter;
@@ -90,6 +92,11 @@ struct mlx5_hca_attr {
uint32_t vhca_id:16;
uint32_t relaxed_ordering_write:1;
uint32_t relaxed_ordering_read:1;
+ uint32_t wqe_index_ignore:1;
+ uint32_t cross_channel:1;
+ uint32_t non_wire_sq:1; /* SQ with non-wire ops is supported. */
+ uint32_t log_max_static_sq_wq:5; /* Static WQE size SQ. */
+ uint32_t dev_freq_khz; /* Timestamp counter frequency, kHz. */
struct mlx5_hca_qos_attr qos;
struct mlx5_hca_vdpa_attr vdpa;
};
@@ -207,6 +214,8 @@ struct mlx5_devx_create_sq_attr {
uint32_t reg_umr:1;
uint32_t allow_swp:1;
uint32_t hairpin:1;
+ uint32_t non_wire:1;
+ uint32_t static_sq_wq:1;
uint32_t user_index:24;
uint32_t cqn:24;
uint32_t packet_pacing_rate_limit_index:16;
@@ -230,6 +239,7 @@ struct mlx5_devx_cq_attr {
uint32_t db_umem_valid:1;
uint32_t use_first_only:1;
uint32_t overrun_ignore:1;
+ uint32_t cqe_size:3;
uint32_t log_cq_size:5;
uint32_t log_page_size:5;
uint32_t uar_page_id;
diff --git a/drivers/common/mlx5/mlx5_prm.h b/drivers/common/mlx5/mlx5_prm.h
index c63795f..cf47103 100644
--- a/drivers/common/mlx5/mlx5_prm.h
+++ b/drivers/common/mlx5/mlx5_prm.h
@@ -41,6 +41,10 @@
/* Invalidate a CQE. */
#define MLX5_CQE_INVALIDATE (MLX5_CQE_INVALID << 4)
+/* Hardware index widths. */
+#define MLX5_CQ_INDEX_WIDTH 24
+#define MLX5_WQ_INDEX_WIDTH 16
+
/* WQE Segment sizes in bytes. */
#define MLX5_WSEG_SIZE 16u
#define MLX5_WQE_CSEG_SIZE sizeof(struct mlx5_wqe_cseg)
@@ -126,7 +130,17 @@
MLX5_ESEG_MIN_INLINE_SIZE)
/* Missed in mlv5dv.h, should define here. */
+#ifndef HAVE_MLX5_OPCODE_ENHANCED_MPSW
#define MLX5_OPCODE_ENHANCED_MPSW 0x29u
+#endif
+
+#ifndef HAVE_MLX5_OPCODE_SEND_EN
+#define MLX5_OPCODE_SEND_EN 0x17u
+#endif
+
+#ifndef HAVE_MLX5_OPCODE_WAIT
+#define MLX5_OPCODE_WAIT 0x0fu
+#endif
/* CQE value to inform that VLAN is stripped. */
#define MLX5_CQE_VLAN_STRIPPED (1u << 0)
@@ -255,6 +269,9 @@
/* The alignment needed for WQ buffer. */
#define MLX5_WQE_BUF_ALIGNMENT sysconf(_SC_PAGESIZE)
+/* The alignment needed for CQ buffer. */
+#define MLX5_CQE_BUF_ALIGNMENT sysconf(_SC_PAGESIZE)
+
/* Completion mode. */
enum mlx5_completion_mode {
MLX5_COMP_ONLY_ERR = 0x0,
@@ -314,6 +331,13 @@ struct mlx5_wqe_eseg {
};
} __rte_packed;
+struct mlx5_wqe_qseg {
+ uint32_t reserved0;
+ uint32_t reserved1;
+ uint32_t max_index;
+ uint32_t qpn_cqn;
+} __rte_packed;
+
/* The title WQEBB, header of WQE. */
struct mlx5_wqe {
union {
@@ -373,6 +397,14 @@ struct mlx5_cqe {
uint8_t op_own;
};
+struct mlx5_cqe_ts {
+ uint64_t timestamp;
+ uint32_t sop_drop_qpn;
+ uint16_t wqe_counter;
+ uint8_t rsvd5;
+ uint8_t op_own;
+};
+
/* Adding direct verbs to data-path. */
/* CQ sequence number mask. */
@@ -992,7 +1024,9 @@ struct mlx5_ifc_cmd_hca_cap_bits {
u8 reserved_at_40[0x40];
u8 log_max_srq_sz[0x8];
u8 log_max_qp_sz[0x8];
- u8 reserved_at_90[0xb];
+ u8 reserved_at_90[0x9];
+ u8 wqe_index_ignore_cap[0x1];
+ u8 dynamic_qp_allocation[0x1];
u8 log_max_qp[0x5];
u8 reserved_at_a0[0xb];
u8 log_max_srq[0x5];
@@ -1018,9 +1052,12 @@ struct mlx5_ifc_cmd_hca_cap_bits {
u8 umr_extended_translation_offset[0x1];
u8 null_mkey[0x1];
u8 log_max_klm_list_size[0x6];
- u8 reserved_at_120[0xa];
+ u8 non_wire_sq[0x1];
+ u8 reserved_at_121[0x9];
u8 log_max_ra_req_dc[0x6];
- u8 reserved_at_130[0xa];
+ u8 reserved_at_130[0x3];
+ u8 log_max_static_sq_wq[0x5];
+ u8 reserved_at_138[0x2];
u8 log_max_ra_res_dc[0x6];
u8 reserved_at_140[0xa];
u8 log_max_ra_req_qp[0x6];
@@ -1271,7 +1308,8 @@ struct mlx5_ifc_qos_cap_bits {
u8 reserved_at_8[0x8];
u8 log_max_flow_meter[0x8];
u8 flow_meter_reg_id[0x8];
- u8 reserved_at_25[0x8];
+ u8 wqe_rate_pp[0x1];
+ u8 reserved_at_25[0x7];
u8 flow_meter_reg_share[0x1];
u8 reserved_at_2e[0x17];
u8 packet_pacing_max_rate[0x20];
@@ -1835,7 +1873,9 @@ struct mlx5_ifc_sqc_bits {
u8 reg_umr[0x1];
u8 allow_swp[0x1];
u8 hairpin[0x1];
- u8 reserved_at_f[0x11];
+ u8 non_wire[0x1];
+ u8 static_sq_wq[0x1];
+ u8 reserved_at_11[0xf];
u8 reserved_at_20[0x8];
u8 user_index[0x18];
u8 reserved_at_40[0x8];
@@ -1935,6 +1975,11 @@ struct mlx5_ifc_flow_meter_parameters_bits {
u8 reserved_at_8[0x60]; // 14h-1Ch
};
+enum {
+ MLX5_CQE_SIZE_64B = 0x0,
+ MLX5_CQE_SIZE_128B = 0x1,
+};
+
struct mlx5_ifc_cqc_bits {
u8 status[0x4];
u8 as_notify[0x1];
@@ -2486,6 +2531,20 @@ struct mlx5_ifc_query_qp_in_bits {
u8 reserved_at_60[0x20];
};
+enum {
+ MLX5_DATA_RATE = 0x0,
+ MLX5_WQE_RATE = 0x1,
+};
+
+struct mlx5_ifc_set_pp_rate_limit_context_bits {
+ u8 rate_limit[0x20];
+ u8 burst_upper_bound[0x20];
+ u8 reserved_at_40[0xC];
+ u8 rate_mode[0x4];
+ u8 typical_packet_size[0x10];
+ u8 reserved_at_60[0x120];
+};
+
/* CQE format mask. */
#define MLX5E_CQE_FORMAT_MASK 0xc
--
1.8.3.1
next prev parent reply other threads:[~2020-07-16 8:23 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-10 6:38 [dpdk-dev] [RFC] mbuf: accurate packet Tx scheduling Viacheslav Ovsiienko
2020-06-10 13:33 ` Harman Kalra
2020-06-10 15:16 ` Slava Ovsiienko
2020-06-17 15:57 ` [dpdk-dev] [EXT] " Harman Kalra
2020-07-01 15:46 ` Slava Ovsiienko
2020-07-01 15:36 ` [dpdk-dev] [PATCH 1/2] mbuf: introduce " Viacheslav Ovsiienko
2020-07-01 15:36 ` [dpdk-dev] [PATCH 2/2] app/testpmd: add send scheduling test capability Viacheslav Ovsiienko
2020-07-07 11:50 ` [dpdk-dev] [PATCH 1/2] mbuf: introduce accurate packet Tx scheduling Olivier Matz
2020-07-07 12:46 ` Slava Ovsiienko
2020-07-07 12:59 ` [dpdk-dev] [PATCH v2 " Viacheslav Ovsiienko
2020-07-07 12:59 ` [dpdk-dev] [PATCH v2 2/2] app/testpmd: add send scheduling test capability Viacheslav Ovsiienko
2020-07-07 13:08 ` [dpdk-dev] [PATCH v3 1/2] mbuf: introduce accurate packet Tx scheduling Viacheslav Ovsiienko
2020-07-07 13:08 ` [dpdk-dev] [PATCH v3 2/2] app/testpmd: add send scheduling test capability Viacheslav Ovsiienko
2020-07-07 14:32 ` [dpdk-dev] [PATCH v3 1/2] mbuf: introduce accurate packet Tx scheduling Olivier Matz
2020-07-07 14:57 ` [dpdk-dev] [PATCH v4 " Viacheslav Ovsiienko
2020-07-07 14:57 ` [dpdk-dev] [PATCH v4 2/2] app/testpmd: add send scheduling test capability Viacheslav Ovsiienko
2020-07-07 15:23 ` [dpdk-dev] [PATCH v4 1/2] mbuf: introduce accurate packet Tx scheduling Olivier Matz
2020-07-08 14:16 ` [dpdk-dev] [PATCH v4 1/2] mbuf: introduce accurate packet Txscheduling Morten Brørup
2020-07-08 14:54 ` Slava Ovsiienko
2020-07-08 15:27 ` Morten Brørup
2020-07-08 15:51 ` Slava Ovsiienko
2020-07-08 15:47 ` [dpdk-dev] [PATCH v5 1/2] mbuf: introduce accurate packet Tx scheduling Viacheslav Ovsiienko
2020-07-08 15:47 ` [dpdk-dev] [PATCH v5 2/2] app/testpmd: add send scheduling test capability Viacheslav Ovsiienko
2020-07-08 16:05 ` [dpdk-dev] [PATCH v5 1/2] mbuf: introduce accurate packet Tx scheduling Slava Ovsiienko
2020-07-09 12:26 ` Thomas Monjalon
2020-07-09 12:36 ` [dpdk-dev] [PATCH v6 " Viacheslav Ovsiienko
2020-07-09 12:36 ` [dpdk-dev] [PATCH v6 2/2] app/testpmd: add send scheduling test capability Viacheslav Ovsiienko
2020-07-09 23:58 ` Ferruh Yigit
2020-07-10 12:41 ` Slava Ovsiienko
2020-07-09 23:47 ` [dpdk-dev] [PATCH v6 1/2] mbuf: introduce accurate packet Tx scheduling Ferruh Yigit
2020-07-10 12:32 ` Slava Ovsiienko
2020-07-10 12:39 ` [dpdk-dev] [PATCH v7 " Viacheslav Ovsiienko
2020-07-10 12:39 ` [dpdk-dev] [PATCH v7 2/2] app/testpmd: add send scheduling test capability Viacheslav Ovsiienko
2020-07-10 15:46 ` [dpdk-dev] [PATCH v7 1/2] mbuf: introduce accurate packet Tx scheduling Slava Ovsiienko
2020-07-10 22:07 ` Ferruh Yigit
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 00/17] net/mlx5: " Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 01/17] common/mlx5: update common part to support packet pacing Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 02/17] net/mlx5: introduce send scheduling devargs Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 03/17] net/mlx5: fix UAR lock sharing for multiport devices Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 04/17] net/mlx5: introduce shared UAR resource Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 05/17] net/mlx5: create clock queue for packet pacing Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 06/17] net/mlx5: create rearm " Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 07/17] net/mlx5: create Tx queues with DevX Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 08/17] net/mlx5: allocate packet pacing context Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 09/17] net/mlx5: introduce clock queue service routine Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 10/17] net/mlx5: prepare Tx queue structures to support timestamp Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 11/17] net/mlx5: convert timestamp to completion index Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 12/17] net/mlx5: prepare Tx datapath to support sheduling Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 13/17] net/mlx5: add scheduling support to send routine template Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 14/17] net/mlx5: add read device clock support Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 15/17] net/mlx5: provide the send scheduling error statistics Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 16/17] common/mlx5: add register access DevX routine Viacheslav Ovsiienko
2020-07-15 6:21 ` [dpdk-dev] [PATCH v2 17/17] net/mlx5: convert Rx timestamps in realtime format Viacheslav Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 00/17] net/mlx5: introduce accurate packet Tx scheduling Viacheslav Ovsiienko
2020-07-16 8:23 ` Viacheslav Ovsiienko [this message]
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 02/17] net/mlx5: introduce send scheduling devargs Viacheslav Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 03/17] net/mlx5: fix UAR lock sharing for multiport devices Viacheslav Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 04/17] net/mlx5: introduce shared UAR resource Viacheslav Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 05/17] net/mlx5: create clock queue for packet pacing Viacheslav Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 06/17] net/mlx5: create rearm " Viacheslav Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 07/17] net/mlx5: create Tx queues with DevX Viacheslav Ovsiienko
2020-07-20 14:18 ` Ferruh Yigit
2020-07-20 15:25 ` Ferruh Yigit
2020-07-21 11:35 ` Slava Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 08/17] net/mlx5: allocate packet pacing context Viacheslav Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 09/17] net/mlx5: introduce clock queue service routine Viacheslav Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 10/17] net/mlx5: prepare Tx queue structures to support timestamp Viacheslav Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 11/17] net/mlx5: convert timestamp to completion index Viacheslav Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 12/17] net/mlx5: prepare Tx datapath to support sheduling Viacheslav Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 13/17] net/mlx5: add scheduling support to send routine template Viacheslav Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 14/17] net/mlx5: add read device clock support Viacheslav Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 15/17] net/mlx5: provide the send scheduling error statistics Viacheslav Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 16/17] common/mlx5: add register access DevX routine Viacheslav Ovsiienko
2020-07-16 8:23 ` [dpdk-dev] [PATCH v3 17/17] net/mlx5: convert Rx timestamps in realtime format Viacheslav Ovsiienko
2020-07-16 20:20 ` [dpdk-dev] [PATCH v3 00/17] net/mlx5: introduce accurate packet Tx scheduling Raslan Darawsheh
2020-07-17 14:28 ` [dpdk-dev] [PATCH 1/3] net/mlx5: fix compilation issue with missing DevX event Viacheslav Ovsiienko
2020-07-17 14:28 ` [dpdk-dev] [PATCH 2/3] net/mlx5: fix compilation issue with atomic128 exchange Viacheslav Ovsiienko
2020-07-17 15:08 ` Thomas Monjalon
2020-07-17 15:15 ` Slava Ovsiienko
2020-07-17 14:28 ` [dpdk-dev] [PATCH 3/3] common/mlx5: fix DevX register access opcode Viacheslav Ovsiienko
2020-07-17 15:05 ` Thomas Monjalon
2020-07-17 15:11 ` Slava Ovsiienko
2020-07-17 15:19 ` Thomas Monjalon
2020-07-17 15:23 ` Slava Ovsiienko
2020-07-17 15:59 ` Thomas Monjalon
2020-07-18 13:38 ` [dpdk-dev] [PATCH 1/3] net/mlx5: fix compilation issue with missing DevX event Raslan Darawsheh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1594887800-6563-2-git-send-email-viacheslavo@mellanox.com \
--to=viacheslavo@mellanox.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=matan@mellanox.com \
--cc=olivier.matz@6wind.com \
--cc=rasland@mellanox.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).