From: "McDaniel, Timothy" <timothy.mcdaniel@intel.com>
To: jerinj@marvell.com
Cc: mattias.ronnblom@ericsson.com, dev@dpdk.org, gage.eads@intel.com,
harry.van.haaren@intel.com, "McDaniel,
Timothy" <timothy.mcdaniel@intel.com>
Subject: [dpdk-dev] [PATCH 16/27] event/dlb: add infos_get and configure
Date: Thu, 30 Jul 2020 14:50:03 -0500 [thread overview]
Message-ID: <1596138614-17409-17-git-send-email-timothy.mcdaniel@intel.com> (raw)
In-Reply-To: <1596138614-17409-1-git-send-email-timothy.mcdaniel@intel.com>
From: "McDaniel, Timothy" <timothy.mcdaniel@intel.com>
Signed-off-by: McDaniel, Timothy <timothy.mcdaniel@intel.com>
---
drivers/event/dlb/dlb.c | 401 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 401 insertions(+)
diff --git a/drivers/event/dlb/dlb.c b/drivers/event/dlb/dlb.c
index c1054d7..2da5cd1 100644
--- a/drivers/event/dlb/dlb.c
+++ b/drivers/event/dlb/dlb.c
@@ -218,6 +218,395 @@ int dlb_string_to_int(int *result, const char *str)
DLB_MAX_NUM_DIR_CREDITS);
return -EINVAL;
}
+ return 0;
+}
+
+/* VDEV-only notes:
+ * This function first unmaps all memory mappings and closes the
+ * domain's file descriptor, which causes the driver to reset the
+ * scheduling domain. Once that completes (when close() returns), we
+ * can safely free the dynamically allocated memory used by the
+ * scheduling domain.
+ *
+ * PF-only notes:
+ * We will maintain a use count and use that to determine when
+ * a reset is required. In PF mode, we never mmap, or munmap
+ * device memory, and we own the entire physical PCI device.
+ */
+
+static void
+dlb_hw_reset_sched_domain(const struct rte_eventdev *dev, bool reconfig)
+{
+ struct dlb_eventdev *dlb = dlb_pmd_priv(dev);
+ enum dlb_configuration_state config_state;
+ int i, j;
+
+ /* Close and reset the domain */
+ dlb_iface_domain_close(dlb);
+
+ /* Free all dynamically allocated port memory */
+ for (i = 0; i < dlb->num_ports; i++)
+ dlb_free_qe_mem(&dlb->ev_ports[i].qm_port);
+
+ /* If reconfiguring, mark the device's queues and ports as "previously
+ * configured." If the user doesn't reconfigure them, the PMD will
+ * reapply their previous configuration when the device is started.
+ */
+ config_state = (reconfig) ? DLB_PREV_CONFIGURED : DLB_NOT_CONFIGURED;
+
+ for (i = 0; i < dlb->num_ports; i++) {
+ dlb->ev_ports[i].qm_port.config_state = config_state;
+ /* Reset setup_done so ports can be reconfigured */
+ dlb->ev_ports[i].setup_done = false;
+ for (j = 0; j < DLB_MAX_NUM_QIDS_PER_LDB_CQ; j++)
+ dlb->ev_ports[i].link[j].mapped = false;
+ }
+
+ for (i = 0; i < dlb->num_queues; i++)
+ dlb->ev_queues[i].qm_queue.config_state = config_state;
+
+ for (i = 0; i < DLB_MAX_NUM_QUEUES; i++)
+ dlb->ev_queues[i].setup_done = false;
+
+ dlb->num_ports = 0;
+ dlb->num_ldb_ports = 0;
+ dlb->num_dir_ports = 0;
+ dlb->num_queues = 0;
+ dlb->num_ldb_queues = 0;
+ dlb->num_dir_queues = 0;
+ dlb->configured = false;
+}
+
+static int
+dlb_ldb_credit_pool_create(struct dlb_hw_dev *handle)
+{
+ struct dlb_create_ldb_pool_args cfg;
+ struct dlb_cmd_response response;
+ int ret;
+
+ if (handle == NULL)
+ return -EINVAL;
+
+ if (!handle->cfg.resources.num_ldb_credits) {
+ handle->cfg.ldb_credit_pool_id = 0;
+ handle->cfg.num_ldb_credits = 0;
+ return 0;
+ }
+
+ cfg.response = (uintptr_t)&response;
+ cfg.num_ldb_credits = handle->cfg.resources.num_ldb_credits;
+
+ ret = dlb_iface_ldb_credit_pool_create(handle,
+ &cfg);
+ if (ret < 0) {
+ DLB_LOG_ERR("dlb: ldb_credit_pool_create ret=%d (driver status: %s)\n",
+ ret, dlb_error_strings[response.status]);
+ }
+
+ handle->cfg.ldb_credit_pool_id = response.id;
+ handle->cfg.num_ldb_credits = cfg.num_ldb_credits;
+
+ return ret;
+}
+
+static int
+dlb_dir_credit_pool_create(struct dlb_hw_dev *handle)
+{
+ struct dlb_create_dir_pool_args cfg;
+ struct dlb_cmd_response response;
+ int ret;
+
+ if (handle == NULL)
+ return -EINVAL;
+
+ if (!handle->cfg.resources.num_dir_credits) {
+ handle->cfg.dir_credit_pool_id = 0;
+ handle->cfg.num_dir_credits = 0;
+ return 0;
+ }
+
+ cfg.response = (uintptr_t)&response;
+ cfg.num_dir_credits = handle->cfg.resources.num_dir_credits;
+
+ ret = dlb_iface_dir_credit_pool_create(handle,
+ &cfg);
+ if (ret < 0)
+ DLB_LOG_ERR("dlb: dir_credit_pool_create ret=%d (driver status: %s)\n",
+ ret, dlb_error_strings[response.status]);
+
+ handle->cfg.dir_credit_pool_id = response.id;
+ handle->cfg.num_dir_credits = cfg.num_dir_credits;
+
+ return ret;
+}
+
+static int
+dlb_hw_create_sched_domain(struct dlb_hw_dev *handle,
+ struct dlb_eventdev *dlb,
+ const struct dlb_hw_rsrcs *resources_asked)
+{
+ int ret = 0;
+ struct dlb_create_sched_domain_args *config_params;
+ struct dlb_cmd_response response;
+
+ if (resources_asked == NULL) {
+ DLB_LOG_ERR("dlb: dlb_create NULL parameter\n");
+ ret = EINVAL;
+ goto error_exit;
+ }
+
+ /* Map generic qm resources to dlb resources */
+ config_params = &handle->cfg.resources;
+
+ config_params->response = (uintptr_t)&response;
+
+ /* DIR ports and queues */
+
+ config_params->num_dir_ports =
+ resources_asked->num_dir_ports;
+
+ config_params->num_dir_credits =
+ resources_asked->num_dir_credits;
+
+ /* LDB ports and queues */
+
+ config_params->num_ldb_queues =
+ resources_asked->num_ldb_queues;
+
+ config_params->num_ldb_ports =
+ resources_asked->num_ldb_ports;
+
+ config_params->num_ldb_credits =
+ resources_asked->num_ldb_credits;
+
+ config_params->num_atomic_inflights =
+ dlb->num_atm_inflights_per_queue *
+ config_params->num_ldb_queues;
+
+ config_params->num_hist_list_entries = config_params->num_ldb_ports *
+ DLB_NUM_HIST_LIST_ENTRIES_PER_LDB_PORT;
+
+ /* dlb limited to 1 credit pool per queue type */
+ config_params->num_ldb_credit_pools = 1;
+ config_params->num_dir_credit_pools = 1;
+
+ DLB_LOG_DBG("sched domain create - ldb_qs=%d, ldb_ports=%d, dir_ports=%d, atomic_inflights=%d, hist_list_entries=%d, ldb_credits=%d, dir_credits=%d, ldb_cred_pools=%d, dir-credit_pools=%d\n",
+ config_params->num_ldb_queues,
+ config_params->num_ldb_ports,
+ config_params->num_dir_ports,
+ config_params->num_atomic_inflights,
+ config_params->num_hist_list_entries,
+ config_params->num_ldb_credits,
+ config_params->num_dir_credits,
+ config_params->num_ldb_credit_pools,
+ config_params->num_dir_credit_pools);
+
+ /* Configure the QM */
+
+ ret = dlb_iface_sched_domain_create(handle, config_params);
+ if (ret < 0) {
+ DLB_LOG_ERR("dlb: domain create failed, device_id = %d, (driver ret = %d, extra status: %s)\n",
+ handle->device_id,
+ ret,
+ dlb_error_strings[response.status]);
+ goto error_exit;
+ }
+
+ handle->domain_id = response.id;
+ handle->domain_id_valid = 1;
+
+ config_params->response = 0;
+
+ ret = dlb_ldb_credit_pool_create(handle);
+ if (ret < 0) {
+ DLB_LOG_ERR("dlb: create ldb credit pool failed\n");
+ goto error_exit2;
+ }
+
+ ret = dlb_dir_credit_pool_create(handle);
+ if (ret < 0) {
+ DLB_LOG_ERR("dlb: create dir credit pool failed\n");
+ goto error_exit2;
+ }
+
+ handle->cfg.configured = true;
+
+ return 0;
+
+error_exit2:
+ dlb_iface_domain_close(dlb);
+
+error_exit:
+
+ return ret;
+}
+
+/* End HW specific */
+static void
+dlb_eventdev_info_get(struct rte_eventdev *dev,
+ struct rte_event_dev_info *dev_info)
+{
+ struct dlb_eventdev *dlb = dlb_pmd_priv(dev);
+ int ret;
+
+ ret = dlb_hw_query_resources(dlb);
+ if (ret) {
+ const struct rte_eventdev_data *data = dev->data;
+
+ DLB_LOG_ERR("get resources err=%d, devid=%d\n",
+ ret, data->dev_id);
+ /* fn is void, so fall through and return values set up in
+ * probe
+ */
+ }
+
+ /* Add num resources currently owned by this domain.
+ * These would become available if the scheduling domain were reset due
+ * to the application recalling eventdev_configure to *reconfigure* the
+ * domain.
+ */
+ evdev_dlb_default_info.max_event_ports += dlb->num_ldb_ports;
+ evdev_dlb_default_info.max_event_queues += dlb->num_ldb_queues;
+ evdev_dlb_default_info.max_num_events += dlb->num_ldb_credits;
+
+
+ /* In DLB A-stepping hardware, applications are limited to 128
+ * configured ports (load-balanced or directed). The reported number of
+ * available ports must reflect this.
+ */
+ if (dlb->revision < DLB_REV_B0) {
+ int used_ports;
+
+ used_ports = DLB_MAX_NUM_LDB_PORTS + DLB_MAX_NUM_DIR_PORTS -
+ dlb->hw_rsrc_query_results.num_ldb_ports -
+ dlb->hw_rsrc_query_results.num_dir_ports;
+
+ evdev_dlb_default_info.max_event_ports =
+ RTE_MIN(evdev_dlb_default_info.max_event_ports,
+ 128 - used_ports);
+ }
+
+ evdev_dlb_default_info.max_event_queues =
+ RTE_MIN(evdev_dlb_default_info.max_event_queues,
+ RTE_EVENT_MAX_QUEUES_PER_DEV);
+
+ evdev_dlb_default_info.max_num_events =
+ RTE_MIN(evdev_dlb_default_info.max_num_events,
+ dlb->max_num_events_override);
+
+ *dev_info = evdev_dlb_default_info;
+}
+
+/* Note: 1 QM instance per QM device, QM instance/device == event device */
+static int
+dlb_eventdev_configure(const struct rte_eventdev *dev)
+{
+ struct dlb_eventdev *dlb = dlb_pmd_priv(dev);
+ struct dlb_hw_dev *handle = &dlb->qm_instance;
+ struct dlb_hw_rsrcs *rsrcs = &handle->info.hw_rsrc_max;
+ const struct rte_eventdev_data *data = dev->data;
+ const struct rte_event_dev_config *config = &data->dev_conf;
+ int ret;
+
+ /* If this eventdev is already configured, we must release the current
+ * scheduling domain before attempting to configure a new one.
+ */
+ if (dlb->configured) {
+ dlb_hw_reset_sched_domain(dev, true);
+
+ ret = dlb_hw_query_resources(dlb);
+ if (ret) {
+ DLB_LOG_ERR("get resources err=%d, devid=%d\n",
+ ret, data->dev_id);
+ return ret;
+ }
+ }
+
+ if (config->nb_event_queues > rsrcs->num_queues) {
+ DLB_LOG_ERR("nb_event_queues parameter (%d) exceeds the QM device's capabilities (%d).\n",
+ config->nb_event_queues,
+ rsrcs->num_queues);
+ return -EINVAL;
+ }
+ if (config->nb_event_ports > (rsrcs->num_ldb_ports
+ + rsrcs->num_dir_ports)) {
+ DLB_LOG_ERR("nb_event_ports parameter (%d) exceeds the QM device's capabilities (%d).\n",
+ config->nb_event_ports,
+ (rsrcs->num_ldb_ports + rsrcs->num_dir_ports));
+ return -EINVAL;
+ }
+ if (config->nb_events_limit > rsrcs->nb_events_limit) {
+ DLB_LOG_ERR("nb_events_limit parameter (%d) exceeds the QM device's capabilities (%d).\n",
+ config->nb_events_limit,
+ rsrcs->nb_events_limit);
+ return -EINVAL;
+ }
+
+ if (config->event_dev_cfg & RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT) {
+ dlb->global_dequeue_wait = false;
+ } else {
+ uint32_t timeout32;
+
+ dlb->global_dequeue_wait = true;
+
+ timeout32 = config->dequeue_timeout_ns;
+
+ /* PF PMD does not support interrupts, and
+ * UMONITOR wait is temporarily disabled.
+ */
+
+ dlb->global_dequeue_wait_ticks =
+ timeout32 * (rte_get_timer_hz() / 1E9);
+ }
+
+ /* Does this platform support umonitor/umwait? */
+ if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_UMWAIT)) {
+ if (RTE_LIBRTE_PMD_DLB_UMWAIT_CTL_STATE != 0 &&
+ RTE_LIBRTE_PMD_DLB_UMWAIT_CTL_STATE != 1) {
+ DLB_LOG_ERR("invalid value (%d) for RTE_LIBRTE_PMD_DLB_UMWAIT_CTL_STATE must be 0 or 1.\n",
+ RTE_LIBRTE_PMD_DLB_UMWAIT_CTL_STATE);
+ return -EINVAL;
+ }
+ dlb->umwait_allowed = true;
+ }
+
+ rsrcs->num_dir_ports = config->nb_single_link_event_port_queues;
+ rsrcs->num_ldb_ports = config->nb_event_ports - rsrcs->num_dir_ports;
+ /* 1 dir queue per dir port */
+ rsrcs->num_ldb_queues = config->nb_event_queues - rsrcs->num_dir_ports;
+
+ /* Scale down nb_events_limit by 4 for directed credits, since there
+ * are 4x as many load-balanced credits.
+ */
+ rsrcs->num_ldb_credits = 0;
+ rsrcs->num_dir_credits = 0;
+
+ if (rsrcs->num_ldb_queues)
+ rsrcs->num_ldb_credits = config->nb_events_limit;
+ if (rsrcs->num_dir_ports)
+ rsrcs->num_dir_credits = config->nb_events_limit / 4;
+ if (dlb->num_dir_credits_override != -1)
+ rsrcs->num_dir_credits = dlb->num_dir_credits_override;
+
+ if (dlb_hw_create_sched_domain(handle, dlb, rsrcs) < 0) {
+ DLB_LOG_ERR("dlb_hw_create_sched_domain failed\n");
+ return -ENODEV;
+ }
+
+ dlb->new_event_limit = config->nb_events_limit;
+ rte_atomic32_set(&dlb->inflights, 0);
+
+ /* Save number of ports/queues for this event dev */
+ dlb->num_ports = config->nb_event_ports;
+ dlb->num_queues = config->nb_event_queues;
+ dlb->num_dir_ports = rsrcs->num_dir_ports;
+ dlb->num_ldb_ports = dlb->num_ports - dlb->num_dir_ports;
+ dlb->num_ldb_queues = dlb->num_queues - dlb->num_dir_ports;
+ dlb->num_dir_queues = dlb->num_dir_ports;
+ dlb->num_ldb_credits = rsrcs->num_ldb_credits;
+ dlb->num_dir_credits = rsrcs->num_dir_credits;
+
+ dlb->configured = true;
return 0;
}
@@ -292,6 +681,18 @@ int dlb_string_to_int(int *result, const char *str)
return 0;
}
+void
+dlb_entry_points_init(struct rte_eventdev *dev)
+{
+ static struct rte_eventdev_ops dlb_eventdev_entry_ops = {
+ .dev_infos_get = dlb_eventdev_info_get,
+ .dev_configure = dlb_eventdev_configure,
+ };
+
+ /* Expose PMD's eventdev interface */
+ dev->dev_ops = &dlb_eventdev_entry_ops;
+
+}
static void
dlb_qm_mmio_fn_init(void)
--
1.7.10
next prev parent reply other threads:[~2020-07-30 19:55 UTC|newest]
Thread overview: 97+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1593232671-5690-0-git-send-email-timothy.mcdaniel@intel.com>
2020-07-30 19:49 ` [dpdk-dev] [PATCH 00/27] Add Intel DLM PMD to 20.11 McDaniel, Timothy
2020-07-30 19:49 ` [dpdk-dev] [PATCH 01/27] eventdev: dlb upstream prerequisites McDaniel, Timothy
2020-08-11 17:44 ` Jerin Jacob
2020-10-17 19:03 ` [dpdk-dev] [PATCH v5 00/22] Add DLB PMD Timothy McDaniel
2020-10-17 19:03 ` [dpdk-dev] [PATCH v5 01/22] event/dlb: add documentation and meson infrastructure Timothy McDaniel
2020-10-20 20:06 ` Eads, Gage
2020-10-17 19:03 ` [dpdk-dev] [PATCH v5 02/22] event/dlb: add dynamic logging Timothy McDaniel
2020-10-17 19:03 ` [dpdk-dev] [PATCH v5 03/22] event/dlb: add private data structures and constants Timothy McDaniel
2020-10-20 20:06 ` Eads, Gage
2020-10-17 19:03 ` [dpdk-dev] [PATCH v5 04/22] event/dlb: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-17 19:03 ` [dpdk-dev] [PATCH v5 05/22] event/dlb: add inline functions Timothy McDaniel
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 06/22] event/dlb: add probe Timothy McDaniel
2020-10-18 12:49 ` Jerin Jacob
2020-10-20 20:06 ` Eads, Gage
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 07/22] event/dlb: add xstats Timothy McDaniel
2020-10-20 20:06 ` Eads, Gage
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 08/22] event/dlb: add infos get and configure Timothy McDaniel
2020-10-20 20:06 ` Eads, Gage
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 09/22] event/dlb: add queue and port default conf Timothy McDaniel
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 10/22] event/dlb: add queue setup Timothy McDaniel
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 11/22] event/dlb: add port setup Timothy McDaniel
2020-10-20 20:06 ` Eads, Gage
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 12/22] event/dlb: add port link Timothy McDaniel
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 13/22] event/dlb: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 14/22] event/dlb: add eventdev start Timothy McDaniel
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 15/22] event/dlb: add enqueue and its burst variants Timothy McDaniel
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 16/22] event/dlb: add dequeue " Timothy McDaniel
2020-10-20 20:06 ` Eads, Gage
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 17/22] event/dlb: add eventdev stop and close Timothy McDaniel
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 18/22] event/dlb: add PMD's token pop public interface Timothy McDaniel
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 19/22] event/dlb: add PMD self-tests Timothy McDaniel
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 20/22] event/dlb: add queue and port release Timothy McDaniel
2020-10-20 20:06 ` Eads, Gage
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 21/22] event/dlb: add timeout ticks entry point Timothy McDaniel
2020-10-17 19:04 ` [dpdk-dev] [PATCH v5 22/22] doc: Add new DLB eventdev driver to relnotes Timothy McDaniel
2020-10-20 20:06 ` Eads, Gage
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 00/23] Add DLB PMD Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 01/23] event/dlb: add documentation and meson infrastructure Timothy McDaniel
2020-10-24 13:05 ` Jerin Jacob
2020-10-26 16:02 ` McDaniel, Timothy
2020-10-24 14:05 ` Thomas Monjalon
2020-10-26 16:12 ` McDaniel, Timothy
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 02/23] event/dlb: add dynamic logging Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 03/23] event/dlb: add private data structures and constants Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 04/23] event/dlb: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 05/23] event/dlb: add inline functions Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 06/23] event/dlb: add eventdev probe Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 07/23] event/dlb: add flexible interface Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 08/23] event/dlb: add probe-time hardware init Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 09/23] event/dlb: add xstats Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 10/23] event/dlb: add infos get and configure Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 11/23] event/dlb: add queue and port default conf Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 12/23] event/dlb: add queue setup Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 13/23] event/dlb: add port setup Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 14/23] event/dlb: add port link Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 15/23] event/dlb: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 16/23] event/dlb: add eventdev start Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 17/23] event/dlb: add enqueue and its burst variants Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 18/23] event/dlb: add dequeue " Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 19/23] event/dlb: add eventdev stop and close Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 20/23] event/dlb: add PMD's token pop public interface Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 21/23] event/dlb: add PMD self-tests Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 22/23] event/dlb: add queue and port release Timothy McDaniel
2020-10-23 18:32 ` [dpdk-dev] [PATCH v6 23/23] event/dlb: add timeout ticks entry point Timothy McDaniel
2020-07-30 19:49 ` [dpdk-dev] [PATCH 02/27] eventdev: do not pass disable_implicit_release bit to trace macro McDaniel, Timothy
2020-08-11 17:48 ` Jerin Jacob
2020-07-30 19:49 ` [dpdk-dev] [PATCH 03/27] event/dlb: add shared code version 10.7.9 McDaniel, Timothy
2020-08-11 18:22 ` [dpdk-dev] [EXT] " Jerin Jacob Kollanukkaran
2020-07-30 19:49 ` [dpdk-dev] [PATCH 04/27] event/dlb: add make and meson build infrastructure McDaniel, Timothy
2020-08-11 18:24 ` Jerin Jacob
2020-07-30 19:49 ` [dpdk-dev] [PATCH 05/27] event/dlb: add DLB documentation McDaniel, Timothy
2020-08-11 18:26 ` Jerin Jacob
2020-07-30 19:49 ` [dpdk-dev] [PATCH 06/27] event/dlb: add dynamic logging McDaniel, Timothy
2020-08-11 18:27 ` Jerin Jacob
2020-07-30 19:49 ` [dpdk-dev] [PATCH 07/27] event/dlb: add private data structures and constants McDaniel, Timothy
2020-07-30 19:49 ` [dpdk-dev] [PATCH 08/27] event/dlb: add definitions shared with LKM or shared code McDaniel, Timothy
2020-07-30 19:49 ` [dpdk-dev] [PATCH 09/27] event/dlb: add inline functions used in multiple files McDaniel, Timothy
2020-07-30 19:49 ` [dpdk-dev] [PATCH 10/27] event/dlb: add PFPMD-specific interface layer to shared code McDaniel, Timothy
2020-07-30 19:49 ` [dpdk-dev] [PATCH 11/27] event/dlb: add flexible PMD to device interfaces McDaniel, Timothy
2020-07-30 19:49 ` [dpdk-dev] [PATCH 12/27] event/dlb: add the PMD's public interfaces McDaniel, Timothy
2020-07-30 19:50 ` [dpdk-dev] [PATCH 13/27] event/dlb: add xstats support McDaniel, Timothy
2020-07-30 19:50 ` [dpdk-dev] [PATCH 14/27] event/dlb: add PMD self-tests McDaniel, Timothy
2020-07-30 19:50 ` [dpdk-dev] [PATCH 15/27] event/dlb: add probe McDaniel, Timothy
2020-07-30 19:50 ` McDaniel, Timothy [this message]
2020-07-30 19:50 ` [dpdk-dev] [PATCH 17/27] event/dlb: add queue_def_conf and port_def_conf McDaniel, Timothy
2020-07-30 19:50 ` [dpdk-dev] [PATCH 18/27] event/dlb: add queue setup McDaniel, Timothy
2020-07-30 19:50 ` [dpdk-dev] [PATCH 19/27] event/dlb: add port_setup McDaniel, Timothy
2020-07-30 19:50 ` [dpdk-dev] [PATCH 20/27] event/dlb: add port_link McDaniel, Timothy
2020-07-30 19:50 ` [dpdk-dev] [PATCH 21/27] event/dlb: add queue_release and port_release McDaniel, Timothy
2020-07-30 19:50 ` [dpdk-dev] [PATCH 22/27] event/dlb: add port_unlink and port_unlinks_in_progress McDaniel, Timothy
2020-07-30 19:50 ` [dpdk-dev] [PATCH 23/27] event/dlb: add eventdev_start McDaniel, Timothy
2020-07-30 19:50 ` [dpdk-dev] [PATCH 24/27] event/dlb: add timeout_ticks, dump, xstats, and selftest McDaniel, Timothy
2020-07-30 19:50 ` [dpdk-dev] [PATCH 25/27] event/dlb: add enqueue and its burst variants McDaniel, Timothy
2020-07-30 19:50 ` [dpdk-dev] [PATCH 26/27] event/dlb: add dequeue, dequeue_burst, and variants McDaniel, Timothy
2020-07-30 19:50 ` [dpdk-dev] [PATCH 27/27] event/dlb: add eventdev_stop and eventdev_close McDaniel, Timothy
2020-06-27 4:37 [dpdk-dev] [PATCH 00/27] event/dlb Intel DLB PMD Tim McDaniel
2020-06-27 4:37 ` [dpdk-dev] [PATCH 16/27] event/dlb: add infos_get and configure Tim McDaniel
-- strict thread matches above, loose matches on Subject: below --
2020-06-12 21:24 [dpdk-dev] [PATCH 00/27] V1 event/dlb add Intel DLB PMD McDaniel, Timothy
2020-06-12 21:24 ` [dpdk-dev] [PATCH 16/27] event/dlb: add infos_get and configure McDaniel, Timothy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1596138614-17409-17-git-send-email-timothy.mcdaniel@intel.com \
--to=timothy.mcdaniel@intel.com \
--cc=dev@dpdk.org \
--cc=gage.eads@intel.com \
--cc=harry.van.haaren@intel.com \
--cc=jerinj@marvell.com \
--cc=mattias.ronnblom@ericsson.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).