From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from stargate.chelsio.com (stargate.chelsio.com [12.32.117.8]) by dpdk.org (Postfix) with ESMTP id 7D60A2BA3 for ; Sat, 27 May 2017 07:46:34 +0200 (CEST) Received: from localhost (scalar.blr.asicdesigners.com [10.193.185.94]) by stargate.chelsio.com (8.13.8/8.13.8) with ESMTP id v4R5kUHm016554; Fri, 26 May 2017 22:46:31 -0700 From: Rahul Lakkireddy To: dev@dpdk.org Cc: Nirranjan Kirubaharan , Indranil Choudhury , Kumar Sanghvi , Rahul Lakkireddy Date: Sat, 27 May 2017 09:16:18 +0530 Message-Id: <15963875f2ff7057a9aba34c76442f1dbcdacedb.1495856462.git.rahul.lakkireddy@chelsio.com> X-Mailer: git-send-email 2.5.3 In-Reply-To: References: In-Reply-To: References: Subject: [dpdk-dev] [PATCH 03/13] cxgbe: update flash part information X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 27 May 2017 05:46:35 -0000 Update flash part identification and decoding to accommodate new flash parts. Signed-off-by: Rahul Lakkireddy Signed-off-by: Kumar Sanghvi --- drivers/net/cxgbe/base/t4_hw.c | 106 +++++++++++++++++++++++++++++++---------- 1 file changed, 81 insertions(+), 25 deletions(-) diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c index da28aa0..4ab12ac 100644 --- a/drivers/net/cxgbe/base/t4_hw.c +++ b/drivers/net/cxgbe/base/t4_hw.c @@ -3863,8 +3863,12 @@ static int t4_wait_dev_ready(struct adapter *adapter) msleep(500); whoami = t4_read_reg(adapter, A_PL_WHOAMI); - return (whoami != 0xffffffff && whoami != X_CIM_PF_NOACCESS - ? 0 : -EIO); + if (whoami != 0xffffffff && whoami != X_CIM_PF_NOACCESS) + return 0; + + dev_err(adapter, "Device didn't become ready for access, whoami = %#x\n", + whoami); + return -EIO; } struct flash_desc { @@ -3880,47 +3884,96 @@ int t4_get_flash_params(struct adapter *adapter) * sectors. */ static struct flash_desc supported_flash[] = { - { 0x150201, 4 << 20 }, /* Spansion 4MB S25FL032P */ + { 0x00150201, 4 << 20 }, /* Spansion 4MB S25FL032P */ }; int ret; - unsigned int i; - u32 info = 0; - + u32 flashid = 0; + unsigned int part, manufacturer; + unsigned int density, size; + + /** + * Issue a Read ID Command to the Flash part. We decode supported + * Flash parts and their sizes from this. There's a newer Query + * Command which can retrieve detailed geometry information but + * many Flash parts don't support it. + */ ret = sf1_write(adapter, 1, 1, 0, SF_RD_ID); if (!ret) - ret = sf1_read(adapter, 3, 0, 1, &info); + ret = sf1_read(adapter, 3, 0, 1, &flashid); t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */ if (ret < 0) return ret; - for (i = 0; i < ARRAY_SIZE(supported_flash); ++i) - if (supported_flash[i].vendor_and_model_id == info) { - adapter->params.sf_size = supported_flash[i].size_mb; + for (part = 0; part < ARRAY_SIZE(supported_flash); part++) { + if (supported_flash[part].vendor_and_model_id == flashid) { + adapter->params.sf_size = + supported_flash[part].size_mb; adapter->params.sf_nsec = adapter->params.sf_size / SF_SEC_SIZE; - return 0; + goto found; } + } - if ((info & 0xff) != 0x20) /* not a Numonix flash */ - return -EINVAL; - info >>= 16; /* log2 of size */ - if (info >= 0x14 && info < 0x18) - adapter->params.sf_nsec = 1 << (info - 16); - else if (info == 0x18) - adapter->params.sf_nsec = 64; - else + manufacturer = flashid & 0xff; + switch (manufacturer) { + case 0x20: { /* Micron/Numonix */ + /** + * This Density -> Size decoding table is taken from Micron + * Data Sheets. + */ + density = (flashid >> 16) & 0xff; + switch (density) { + case 0x14: + size = 1 << 20; /* 1MB */ + break; + case 0x15: + size = 1 << 21; /* 2MB */ + break; + case 0x16: + size = 1 << 22; /* 4MB */ + break; + case 0x17: + size = 1 << 23; /* 8MB */ + break; + case 0x18: + size = 1 << 24; /* 16MB */ + break; + case 0x19: + size = 1 << 25; /* 32MB */ + break; + case 0x20: + size = 1 << 26; /* 64MB */ + break; + case 0x21: + size = 1 << 27; /* 128MB */ + break; + case 0x22: + size = 1 << 28; /* 256MB */ + break; + default: + dev_err(adapter, "Micron Flash Part has bad size, ID = %#x, Density code = %#x\n", + flashid, density); + return -EINVAL; + } + + adapter->params.sf_size = size; + adapter->params.sf_nsec = size / SF_SEC_SIZE; + break; + } + default: + dev_err(adapter, "Unsupported Flash Part, ID = %#x\n", flashid); return -EINVAL; - adapter->params.sf_size = 1 << info; + } +found: /* * We should reject adapters with FLASHes which are too small. So, emit * a warning. */ - if (adapter->params.sf_size < FLASH_MIN_SIZE) { - dev_warn(adapter, "WARNING!!! FLASH size %#x < %#x!!!\n", - adapter->params.sf_size, FLASH_MIN_SIZE); - } + if (adapter->params.sf_size < FLASH_MIN_SIZE) + dev_warn(adapter, "WARNING: Flash Part ID %#x, size %#x < %#x\n", + flashid, adapter->params.sf_size, FLASH_MIN_SIZE); return 0; } @@ -4023,8 +4076,11 @@ int t4_prep_adapter(struct adapter *adapter) t4_os_find_pci_capability(adapter, PCI_CAP_ID_VPD); ret = t4_get_flash_params(adapter); - if (ret < 0) + if (ret < 0) { + dev_err(adapter, "Unable to retrieve Flash Parameters, ret = %d\n", + -ret); return ret; + } adapter->params.cim_la_size = CIMLA_SIZE; -- 2.5.3