DPDK patches and discussions
 help / color / mirror / Atom feed
From: Timothy McDaniel <timothy.mcdaniel@intel.com>
Cc: dev@dpdk.org, erik.g.carrillo@intel.com, gage.eads@intel.com,
	harry.van.haaren@intel.com, jerinj@marvell.com
Subject: [dpdk-dev] [PATCH v4 13/22] event/dlb: add port unlink and port unlinks in progress
Date: Fri, 11 Sep 2020 14:18:31 -0500	[thread overview]
Message-ID: <1599851920-16802-14-git-send-email-timothy.mcdaniel@intel.com> (raw)
In-Reply-To: <1599851920-16802-1-git-send-email-timothy.mcdaniel@intel.com>

Add supports for the port unlink(s) eventdev entry points.
The unlink operation is an asynchronous operation executed by
a control thread, and the unlinks-in-progress function reads
a counter shared with the control thread.

Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
---
 drivers/event/dlb/dlb.c | 167 +++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 166 insertions(+), 1 deletion(-)

diff --git a/drivers/event/dlb/dlb.c b/drivers/event/dlb/dlb.c
index c3ad2ee..4f56869 100644
--- a/drivers/event/dlb/dlb.c
+++ b/drivers/event/dlb/dlb.c
@@ -566,7 +566,6 @@ dlb_eventdev_info_get(struct rte_eventdev *dev,
 	evdev_dlb_default_info.max_event_queues += dlb->num_ldb_queues;
 	evdev_dlb_default_info.max_num_events += dlb->num_ldb_credits;
 
-
 	/* In DLB A-stepping hardware, applications are limited to 128
 	 * configured ports (load-balanced or directed). The reported number of
 	 * available ports must reflect this.
@@ -704,6 +703,169 @@ dlb_eventdev_configure(const struct rte_eventdev *dev)
 	return 0;
 }
 
+static int16_t
+dlb_hw_unmap_ldb_qid_from_port(struct dlb_hw_dev *handle,
+			       uint32_t qm_port_id,
+			       uint16_t qm_qid)
+{
+	struct dlb_unmap_qid_args cfg;
+	struct dlb_cmd_response response;
+	int32_t ret;
+
+	if (handle == NULL)
+		return -EINVAL;
+
+	cfg.response = (uintptr_t)&response;
+	cfg.port_id = qm_port_id;
+	cfg.qid = qm_qid;
+
+	ret = dlb_iface_unmap_qid(handle, &cfg);
+	if (ret < 0)
+		DLB_LOG_ERR("dlb: unmap qid error, ret=%d (driver status: %s)\n",
+			    ret, dlb_error_strings[response.status]);
+
+	return ret;
+}
+
+static int
+dlb_event_queue_detach_ldb(struct dlb_eventdev *dlb,
+			   struct dlb_eventdev_port *ev_port,
+			   struct dlb_eventdev_queue *ev_queue)
+{
+	int ret, i;
+
+	/* Don't unlink until start time. */
+	if (dlb->run_state == DLB_RUN_STATE_STOPPED)
+		return 0;
+
+	for (i = 0; i < DLB_MAX_NUM_QIDS_PER_LDB_CQ; i++) {
+		if (ev_port->link[i].valid &&
+		    ev_port->link[i].queue_id == ev_queue->id)
+			break; /* found */
+	}
+
+	/* This is expected with eventdev API!
+	 * It blindly attempts to unmap all queues.
+	 */
+	if (i == DLB_MAX_NUM_QIDS_PER_LDB_CQ) {
+		DLB_LOG_DBG("dlb: ignoring LB QID %d not mapped for qm_port %d.\n",
+			    ev_queue->qm_queue.id,
+			    ev_port->qm_port.id);
+		return 0;
+	}
+
+	ret = dlb_hw_unmap_ldb_qid_from_port(&dlb->qm_instance,
+					     ev_port->qm_port.id,
+					     ev_queue->qm_queue.id);
+	if (!ret)
+		ev_port->link[i].mapped = false;
+
+	return ret;
+}
+
+static int
+dlb_eventdev_port_unlink(struct rte_eventdev *dev, void *event_port,
+			 uint8_t queues[], uint16_t nb_unlinks)
+{
+	struct dlb_eventdev_port *ev_port = event_port;
+	struct dlb_eventdev *dlb;
+	int i;
+
+	RTE_SET_USED(dev);
+
+	if (!ev_port->setup_done) {
+		DLB_LOG_ERR("dlb: evport %d is not configured\n",
+			    ev_port->id);
+		rte_errno = -EINVAL;
+		return 0;
+	}
+
+	if (!queues || nb_unlinks == 0) {
+		DLB_LOG_DBG("dlb: queues is NULL or nb_unlinks is 0\n");
+		return 0; /* Ignore and return success */
+	}
+
+	if (ev_port->qm_port.is_directed) {
+		DLB_LOG_DBG("dlb: ignore unlink from dir port %d\n",
+			    ev_port->id);
+		rte_errno = 0;
+		return nb_unlinks; /* as if success */
+	}
+
+	dlb = ev_port->dlb;
+
+	for (i = 0; i < nb_unlinks; i++) {
+		struct dlb_eventdev_queue *ev_queue;
+		int ret, j;
+
+		if (queues[i] >= dlb->num_queues) {
+			DLB_LOG_ERR("dlb: invalid queue id %d\n", queues[i]);
+			rte_errno = -EINVAL;
+			return i; /* return index of offending queue */
+		}
+
+		ev_queue = &dlb->ev_queues[queues[i]];
+
+		/* Does a link exist? */
+		for (j = 0; j < DLB_MAX_NUM_QIDS_PER_LDB_CQ; j++)
+			if (ev_port->link[j].queue_id == queues[i] &&
+			    ev_port->link[j].valid)
+				break;
+
+		if (j == DLB_MAX_NUM_QIDS_PER_LDB_CQ)
+			continue;
+
+		ret = dlb_event_queue_detach_ldb(dlb, ev_port, ev_queue);
+		if (ret) {
+			DLB_LOG_ERR("unlink err=%d for port %d queue %d\n",
+				    ret, ev_port->id, queues[i]);
+			rte_errno = -ENOENT;
+			return i; /* return index of offending queue */
+		}
+
+		ev_port->link[j].valid = false;
+		ev_port->num_links--;
+		ev_queue->num_links--;
+	}
+
+	return nb_unlinks;
+}
+
+static int
+dlb_eventdev_port_unlinks_in_progress(struct rte_eventdev *dev,
+				      void *event_port)
+{
+	struct dlb_eventdev_port *ev_port = event_port;
+	struct dlb_eventdev *dlb;
+	struct dlb_hw_dev *handle;
+	struct dlb_pending_port_unmaps_args cfg;
+	struct dlb_cmd_response response;
+	int ret;
+
+	RTE_SET_USED(dev);
+
+	if (!ev_port->setup_done) {
+		DLB_LOG_ERR("dlb: evport %d is not configured\n",
+			    ev_port->id);
+		rte_errno = -EINVAL;
+		return 0;
+	}
+
+	cfg.port_id = ev_port->qm_port.id;
+	cfg.response = (uintptr_t)&response;
+	dlb = ev_port->dlb;
+	handle = &dlb->qm_instance;
+	ret = dlb_iface_pending_port_unmaps(handle, &cfg);
+
+	if (ret < 0) {
+		DLB_LOG_ERR("dlb: num_unlinks_in_progress ret=%d (driver status: %s)\n",
+			    ret, dlb_error_strings[response.status]);
+		return ret;
+	}
+
+	return response.id;
+}
+
 static void
 dlb_eventdev_port_default_conf_get(struct rte_eventdev *dev,
 				   uint8_t port_id,
@@ -1879,6 +2041,9 @@ dlb_entry_points_init(struct rte_eventdev *dev)
 		.queue_setup      = dlb_eventdev_queue_setup,
 		.port_setup       = dlb_eventdev_port_setup,
 		.port_link        = dlb_eventdev_port_link,
+		.port_unlink      = dlb_eventdev_port_unlink,
+		.port_unlinks_in_progress =
+				    dlb_eventdev_port_unlinks_in_progress,
 		.dump             = dlb_eventdev_dump,
 		.xstats_get       = dlb_eventdev_xstats_get,
 		.xstats_get_names = dlb_eventdev_xstats_get_names,
-- 
2.6.4


  parent reply	other threads:[~2020-09-11 19:24 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-11 19:18 [dpdk-dev] [PATCH v4 00/22] Add DLB PMD Timothy McDaniel
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 01/22] event/dlb: add documentation and meson infrastructure Timothy McDaniel
2020-09-14 20:56   ` Eads, Gage
2020-09-16 21:05     ` McDaniel, Timothy
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 02/22] event/dlb: add dynamic logging Timothy McDaniel
2020-09-14 21:00   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 03/22] event/dlb: add private data structures and constants Timothy McDaniel
2020-09-14 22:08   ` Eads, Gage
2020-10-08 18:14   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 04/22] event/dlb: add definitions shared with LKM or shared code Timothy McDaniel
2020-09-15 18:20   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 05/22] event/dlb: add inline functions Timothy McDaniel
2020-10-08 18:22   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 06/22] event/dlb: add probe Timothy McDaniel
2020-10-08 18:51   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 07/22] event/dlb: add xstats Timothy McDaniel
2020-10-08 20:53   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 08/22] event/dlb: add infos get and configure Timothy McDaniel
2020-10-08 21:01   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 09/22] event/dlb: add queue and port default conf Timothy McDaniel
2020-10-08 21:02   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 10/22] event/dlb: add queue setup Timothy McDaniel
2020-10-08 21:15   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 11/22] event/dlb: add port setup Timothy McDaniel
2020-10-08 21:28   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 12/22] event/dlb: add port link Timothy McDaniel
2020-10-08 21:31   ` Eads, Gage
2020-09-11 19:18 ` Timothy McDaniel [this message]
2020-10-08 21:38   ` [dpdk-dev] [PATCH v4 13/22] event/dlb: add port unlink and port unlinks in progress Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 14/22] event/dlb: add eventdev start Timothy McDaniel
2020-10-08 21:41   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 15/22] event/dlb: add enqueue and its burst variants Timothy McDaniel
2020-10-08 21:43   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 16/22] event/dlb: add dequeue " Timothy McDaniel
2020-10-08 21:48   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 17/22] event/dlb: add eventdev stop and close Timothy McDaniel
2020-10-08 21:49   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 18/22] event/dlb: add PMD's token pop public interface Timothy McDaniel
2020-10-08 21:50   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 19/22] event/dlb: add PMD self-tests Timothy McDaniel
2020-10-08 21:56   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 20/22] event/dlb: add queue and port release Timothy McDaniel
2020-10-08 21:57   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 21/22] event/dlb: add timeout ticks entry point Timothy McDaniel
2020-10-08 22:01   ` Eads, Gage
2020-09-11 19:18 ` [dpdk-dev] [PATCH v4 22/22] doc: Add new DLB eventdev driver to relnotes Timothy McDaniel
2020-10-08 22:03   ` Eads, Gage

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1599851920-16802-14-git-send-email-timothy.mcdaniel@intel.com \
    --to=timothy.mcdaniel@intel.com \
    --cc=dev@dpdk.org \
    --cc=erik.g.carrillo@intel.com \
    --cc=gage.eads@intel.com \
    --cc=harry.van.haaren@intel.com \
    --cc=jerinj@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).